- Users - lists.chirpmyradio.com

[chirp_users] Icom IC-T7H interface
by sparks4151＠aol.com 23 Jan '16

23 Jan '16

Has anyone built an interface for an Icom IC-T7H, I've had one for years and programming it from the key pad is OK, just thought there might be something even easier W2ZDP

1 0

[chirp_users] modification to G4TIC programming interface for FT7900
by Jon GrosJean 23 Jan '16

23 Jan '16

The adjustable level control is not needed because there is a 4.7K pull-up to 5V inside the radio. The attached circuit works fine.

1 0

[chirp_users] First time programming questions
by Robert Campbell 23 Jan '16

23 Jan '16

Hello group, I am programming a baofeng UV82, this is my first time programming any radio using a computer. I don't know what information to input into the radio. The ones I am not sure about is the TONE SQL. DTCS CODE, DTCS RX CODE, DTCS POL, CROSS MODE and where do i get this information from. Thanks for any help. de WA5RACWe don't know what Tomorrow will bring so,We Thank The Father, for the Son, for Whom without we would have no tomorrow. "see you on the radio"

4 4

[chirp_users] new Baofeng radio & th-f6a -- linux issues
by Rodney D. Myers 23 Jan '16

23 Jan '16

Debian jessie chirp-daily-20160110.tar.gz 2 added python packages attached is the log file I've downloaded the archives of the mail list and searched those phrases with no luck I believe I followed the instructions on the web page TH-F6a -- Start chirp; port: ttyUSB0 manuf: Kenwood radio: auto detect I get the error message; 'serial' object has no attribute 'setbaud' ========================================= UV-5R V2 -- Start chirp; port: ttyUSB0 manuf: Baofeng radio: uv5r I get the error message; failed to communicate with radio 'serial' object has no attribute 'setTimeOut' -- Rodney D. Myers <rod_dmyers(a)fastmail.fm> - kg6anx They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Ben Franklin - 1759

3 10

[chirp_users] Linux usb port in Ubuntu and Mint
by jon 23 Jan '16

23 Jan '16

I spent a lot of time trying to get my Linux computers to read from my Wouxun radio using both the Wouxun programming cable and an Ftdi1232 board and got a serial port error message. My mistake was selecting dev/ttyS0. You need to select dev/ttyUSB0 way down at the end of the tty list.

4 3

[chirp_users] how connect Icom IC-2730 to CHIRP ?
by IW2GJV 23 Jan '16

23 Jan '16

Hi, i see the table in CHIRP but i see that the new radio icom IC-2730 is not supported by CHIRP ? you tested if not work or ? how help me to assemble a cable to connect this radio at the computer to used CHIRP ? help me , best 73

1 0

[chirp_users] FT7900r programmer
by Jon GrosJean 22 Jan '16

22 Jan '16

I am going to make a FT7900r programmer using an FTDI-1232 board which can be set for 3.3V or 5V logic level. The FT7900r uses 5V logic. There is an internal 4.7k pull up resistor on the PTT line, so an external pull-up is not needed. My question is about the data polarity. The DL8WA board inverts the RS-232 data on both receive and transmit. Maybe the person writing the program wrote it to work this way. Should I invert the outputs of the FTDI board when used with CHIRP? If not, a simple diode could be used on the TX data output to pull down the PTT input. If everything should be inverted, then a couple of transistors could be used. I will make my circuit available when finished.

1 0

[chirp_users] Icom IC706Mk2G
by Dave Hartman 22 Jan '16

22 Jan '16

Anyone ever try Chirp on an Icom 706Mk2G? What was the result? -- Dave - AC2GL

1 0

[chirp_users] Error importing to VV-898
by Marc Fuller 22 Jan '16

22 Jan '16

Hi All, Just purchased a Leixen VV-898. Downloaded the base image from the radio no problem. Went to import a CSV file of my channels and getting the following error.. [cid:image001.png@01D15536.B2DD7D70] The same CSV file is OK for all my other radio's, but not to Leixen. Once you press OK, the whole program hangs. Any help appreciated. Marc

2 3

[chirp_users] Ubuntu PPA version not up to date?
by Derek Tombrello 22 Jan '16

22 Jan '16

I have installed CHIRP on my Ubuntu 14.04LTS laptop using the PPA method as described here - http://chirp.danplanet.com/projects/chirp/wiki/Download I kept getting "radio refused to send block xxx" errors, although it worked fine using the Windows under VirtualBox. After reading the bug reports, I tried using the "manual install" found here - http://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux That worked perfectly. Looking at the About page, I see that the PPA version installed is 0.4.1 while the source version is daily-20160116. I'm just curious as to why the PPA version is not (or does not appear to be) up to date? Thanks. -- ✞ Derek Tombrello (KM4JAG) www.RobotsAndComputers.com/blog Southern Pride "First they came for the Communists, but I was not a Communist so I did not speak out. Then they came for the Socialists and the Trade Unionists, but I was neither, so I did not speak out. Then they came for the Jews, but I was not a Jew so I did not speak out. And when they came for me, there was no one left to speak out for me."

3 8