January 2019 - Users - lists.chirpmyradio.com

[chirp_users] TYT TH-9800power levels
by Glenn At Home 17 Feb '19

17 Feb '19

Hi, I tried importing a CSV file from my Baofeng into my new radio, the TYT, and after importing it, I read that all the power levels are on low. I noticed that I could use the properties to change it, but that is a lot of fields to do that to. When I open that CSV file in Excel, it shows that field as a 5 if I'm reading the correct field. If that is not the field, then the field with the power is not showing up in Excel. Also, while importing it, it encountered an error on line 160, but that is just one of the CB frequencies I put in, but it is not the first field, it is about half-way through the CB frequencies, I don't know what that is about. Thanks for any thoughts. Glenn Sent From My Tabletop

3 4

Re: [chirp_users] chirp_users Digest, Vol 121, Issue 17
by Eric Chopin 25 Jan '19

25 Jan '19

Has anyone had success programming one of the Yaesu 2900 units using CHIRP if so what cable did you use other than RJ Systems? I have a Yaesu 2980 that I would like to program with CHIRP All answers appreciated 73's Eric On Thu, Jan 24, 2019 at 12:03 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Yeasu FT2-DR (E. M. Recio) > 2. Re: Yeasu FT2-DR (Nigel A. Gunn G8IFF/W8IFF) > 3. Re: Yeasu FT2-DR (E. M. Recio) > 4. Re: Yeasu FT2-DR (Matt or Amanda) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 23 Jan 2019 17:50:43 -0500 > From: "E. M. Recio" <n2wog(a)yahoo.com> > Subject: [chirp_users] Yeasu FT2-DR > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <1785e094-5aa2-699a-7ddf-e71052d5b84c(a)yahoo.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > Just got my hands on this puppy. Wondering if anything special is needed. > > Thanks! > > > > > ------------------------------ > > Message: 2 > Date: Wed, 23 Jan 2019 18:10:00 -0500 (EST) > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > Subject: Re: [chirp_users] Yeasu FT2-DR > To: "E. M. Recio" <n2wog(a)yahoo.com>, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> > Message-ID: <274966109.27564.1548285000515(a)email.ionos.com> > Content-Type: text/plain; charset=UTF-8 > > Nope. > > > On 23 January 2019 at 17:50 "E. M. Recio via chirp_users" < > chirp_users(a)intrepid.danplanet.com> wrote: > > > > > > Just got my hands on this puppy. Wondering if anything special is needed. > > > > Thanks! > > > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 > 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www > http://www.ngunn.net > > > ------------------------------ > > Message: 3 > Date: Wed, 23 Jan 2019 18:56:30 -0500 > From: "E. M. Recio" <n2wog(a)yahoo.com> > Subject: Re: [chirp_users] Yeasu FT2-DR > To: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net>, Discussion of > CHIRP > <chirp_users(a)intrepid.danplanet.com> > Message-ID: <b693b515-91c5-dd20-e371-52fa6b236e0b(a)yahoo.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > sweet. this is the best answer all week. it's been [the week] horrible. > LOL. > > On 23/01/2019 18.10, Nigel A. Gunn G8IFF/W8IFF wrote: > > Nope. > > > >> On 23 January 2019 at 17:50 "E. M. Recio via chirp_users" < > chirp_users(a)intrepid.danplanet.com> wrote: > >> > >> > >> Just got my hands on this puppy. Wondering if anything special is > needed. > >> > >> Thanks! > >> > >> > >> _______________________________________________ > >> chirp_users mailing list > >> chirp_users(a)intrepid.danplanet.com > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > >> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > >> To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 > 937 825 5032 > > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www > http://www.ngunn.net > > > ------------------------------ > > Message: 4 > Date: Thu, 24 Jan 2019 09:00:43 -0600 > From: Matt or Amanda <couch72608(a)att.net> > Subject: Re: [chirp_users] Yeasu FT2-DR > To: "E. M. Recio" <n2wog(a)yahoo.com>, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> > Message-ID: <B5CF0424-FA59-4946-95C8-E2D87BDA4A7C(a)att.net> > Content-Type: text/plain; charset=utf-8 > > What the hell are y?all talking about? > > Sent from my iPhone > > > On Jan 23, 2019, at 5:56 PM, E. M. Recio via chirp_users < > chirp_users(a)intrepid.danplanet.com> wrote: > > > > sweet. this is the best answer all week. it's been [the week] horrible. > LOL. > > > >> On 23/01/2019 18.10, Nigel A. Gunn G8IFF/W8IFF wrote: > >> Nope. > >> > >>> On 23 January 2019 at 17:50 "E. M. Recio via chirp_users" < > chirp_users(a)intrepid.danplanet.com> wrote: > >>> > >>> > >>> Just got my hands on this puppy. Wondering if anything special is > needed. > >>> > >>> Thanks! > >>> > >>> > >>> _______________________________________________ > >>> chirp_users mailing list > >>> chirp_users(a)intrepid.danplanet.com > >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > >>> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > >>> To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > >> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 > 937 825 5032 > >> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www > http://www.ngunn.net > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Matthew Couch at couch72608(a)att.net > > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > End of chirp_users Digest, Vol 121, Issue 17 > ******************************************** >

3 2

[chirp_users] Trying to download and run CHIRP on my Dell laptop.
by Skip Luke 25 Jan '19

25 Jan '19

It started OK and I was able to access the UV-82, but when I made a couple changes and uploaded the file to the radio, it stopped in the middle and everything locked up. The Dell locked up. I restarted it, and CHIRP wouldn't run. Uninstalled and then downloaded again and installed. Still will not run.; Getting frustrated. It worked fine on my old machine in Linux. Running Win 7 now, regrettably., (on the Dell.) Old machine has problems, but I may have to resurrect it. I hate Windows! The UV-82 did something weird ..... used it to check into a new last week, and somehow that freq. offest changed ..... now looking at the repeater input frequency, so it is backwards. Aaaaaargh! Skip KL7IXX

3 2

Re: [chirp_users] Trying to download and run CHIRP on my Dell laptop.
by Edwin W Luke 24 Jan '19

24 Jan '19

Ouch! Well, thanks. Not such good news. 73, Skip KL7IXX On January 24, 2019, at 7:47 PM, "D.J.J. Ring, Jr." <n1ea(a)arrl.net> wrote: You might be having a hard drive failure problem, I had that problem. Download a live version of Linux, install CHIRP and run from RAM. You have to use a live CD. Many are available. BURN DVD and install CHIRP. If it works, get ready for computer replacement. 73 David N1EA On Thu, Jan 24, 2019, 22:25 Skip Luke <salty4568(a)gmail.com wrote: It started OK and I was able to access the UV-82, but when I made a couple changes and uploaded the file to the radio, it stopped in the middle and everything locked up. The Dell locked up. I restarted it, and CHIRP wouldn't run. Uninstalled and then downloaded again and installed. Still will not run.; Getting frustrated. It worked fine on my old machine in Linux. Running Win 7 now, regrettably., (on the Dell.) Old machine has problems, but I may have to resurrect it. I hate Windows! The UV-82 did something weird ..... used it to check into a new last week, and somehow that freq. offest changed ..... now looking at the repeater input frequency, so it is backwards. Aaaaaargh! Skip KL7IXX _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea(a)arrl.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Yeasu FT2-DR
by E. M. Recio 24 Jan '19

24 Jan '19

Just got my hands on this puppy. Wondering if anything special is needed. Thanks!

5 5

[chirp_users] Tyt 9800 Update
by Glenn At Home 22 Jan '19

22 Jan '19

Thanks All, I think I got it working. I tweaked the CSV file, at one point, Open Office took out all the values in the offset column, so I opened another file in Excel that was about the same, and I selected the column and copied it and switched over to the file in Open Office and pasted it in. Setting it to the defaults helped, because this time when I imported the file, I think, the VHF is on the left and the UHF is on the right. Not much UHF going on around here to be sure. I need to learn the buttons on the mic other than the number pad and I know the top switch locks some of the keys, including the two top ones. It's good to turn those off, as I find myself pressing keys on that thing just by holding it while punching a button. Anyway, thanks all for helping me get this far. Glenn Sent From My Tabletop

3 3

[chirp_users] UV-5R question
by Keith .Yordy 22 Jan '19

22 Jan '19

I have used Chirp to setup several UV-5R units and it works fantastic! However, I was trying to setup a UV-5R with the keypad. I see in Chirp there is a setting for Duplex, but this doesn't appear to show up anywhere in the UV-5R. I have compared 462.600 simplex and 462.600 duplex and see no differences in the keypad menu system. if I was to setup a duplex channel manually, I am assuming I would have to set the offsets, etc., even though they show no differences on the UV-5R. Is there another trick I am missing? KY

5 4

[chirp_users] KT7900D/QB25 driver for macOS 10.13 (Mojave)?
by Patty Winter 22 Jan '19

22 Jan '19

I was recently given a Radioddity QB25, which is also a QYT KT7900D. It came with a programming cable. I got CHIRP up and running on my MacBook Air, and followed the steps to turn off the radio, connect the cable, and turn the radio back on. But there is no USB port in the ports list in CHIRP, and when I try the default Bluetooth port, I get a message that the radio is not in clone mode. I suspect a driver issue. I tried to search the archives of this mailing list and found some information about macOS drivers for various cables (including some built-in Apple drivers), but didn't see anything specifically about the cable that's supplied by Radioddity. Their website only has Windows driver software. (They say the cable itself works with Windows 7 without a driver but you need a driver for Windows 10.) I tried the generic driver linked from the CHIRP MacOS Tips page, but that didn't work. (Was I supposed to have restarted the MacBook? I only quit and relaunched CHIRP.) There are other macOS drivers listed on that page, but without knowing what kind of cable/chip Radioddity supplies, I don't know which driver to look for. Does anyone here happen to know what's in the QB25 cable and which driver works with it? I could try contacting Radioddity, but they appear to know nothing about Macs and might not give me sufficient information. Thanks/73,Patty N6BIS

6 13

Re: [chirp_users] chirp_users Digest, Vol 121, Issue 15
by Keith .Yordy 21 Jan '19

21 Jan '19

Jardy, Regarding the Duplex programming, my question was when using Chirp no observable changes can be seen in the Baofeng menu. I was just curious as to how that information is stored. To manually set up duplex, I assume your description of the procedure is correct. KY On Mon, Jan 21, 2019 at 3:04 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: KT7900D/QB25 driver for macOS 10.13 (Mojave)? (Jim Unroe) > 2. Re: KT7900D/QB25 driver for macOS 10.13 (Mojave)? > (Frederick R. McDougall) > 3. Re: KT7900D/QB25 driver for macOS 10.13 (Mojave)? (Pat Anderson) > 4. Re: Tyt 9800 Update working with CSV files (Gary Craig) > 5. Re: Tyt 9800 Update working with CSV files > (Nigel A. Gunn G8IFF/W8IFF) > 6. Re: How do I get extended error report from CHIRP? debug.log > location in windows 10 (Gary Craig) > 7. Re: Tyt 9800 Update squelch issue (Gary Craig) > 8. Re: Tyt 9800 Update working with CSV files (Glenn At Home) > 9. Re: Tyt 9800 Update working with CSV files (Glenn At Home) > 10. Re: KT7900D/QB25 driver for macOS 10.13 (Mojave)? (Chuck Hast) > 11. Re: KT7900D/QB25 driver for macOS 10.13 (Mojave)? (Patty Winter) > 12. UV-5R question (Keith .Yordy) > 13. Re: Tyt 9800 Update working with CSV files (Gary Craig) > 14. Re: UV-5R question (Jardy) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 20 Jan 2019 15:28:19 -0500 > From: Jim Unroe <rock.unroe(a)gmail.com> > Subject: Re: [chirp_users] KT7900D/QB25 driver for macOS 10.13 > (Mojave)? > To: Patty Winter <n6bis(a)yahoo.com>, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> > Message-ID: > < > CADnO8U5HKwDg_25bu8JAa-BZZMyaLhjS5wmGFtFvcA+sT4NPSg(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > On Sun, Jan 20, 2019 at 1:34 PM Patty Winter via chirp_users > <chirp_users(a)intrepid.danplanet.com> wrote: > > > > > > Success! > > > > I went over to mac-usb-serial.com as Jim suggested, intending to send > them email asking whether the Radioddity/QYT cable was likely supported. > They had a button on their home page to download a serial detection app, > and when I did that, it saw the cable immediately and gave me a link to the > order page for the correct driver. Three minutes and $9.30 later, I was > successfully retrieving data from my QB25. I exported it to a CSV file so I > can peruse it in Excel. > > > > Thanks for the help, guys. If either of you are involved in CHIRP > development, perhaps you can suggest that mac-usb-serial.com be mentioned > on the MacOS Tips page. Their detection app makes it easy to tell whether > you can get a compatible driver without all the trial and error of > downloading other drivers. I still don't know what happened to the other > 2-3 drivers I installed. They said "Installation successful" but I don't > see them on my Mac. > > > > > > 73, > > Patty > > This is great news. Have fun with your radio and CHIRP. > > Jim KC9HI > > > ------------------------------ > > Message: 2 > Date: Sun, 20 Jan 2019 14:33:36 -0700 > From: "Frederick R. McDougall" <frmcdo(a)gmail.com> > Subject: Re: [chirp_users] KT7900D/QB25 driver for macOS 10.13 > (Mojave)? > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > < > CAOZZO6C5G5RSZzj1VXUwHX6J2CsZJ4wQP98ruT9TQ5fLRMfbpg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > PAtty > Please be carefully with Excel as it truncates trailing commas which upsets > Chirp Try LibreOffice which does not do this. > Fred VA6FRM > > On Sun., Jan. 20, 2019, 13:30 Jim Unroe <rock.unroe(a)gmail.com wrote: > > > On Sun, Jan 20, 2019 at 1:34 PM Patty Winter via chirp_users > > <chirp_users(a)intrepid.danplanet.com> wrote: > > > > > > > > > Success! > > > > > > I went over to mac-usb-serial.com as Jim suggested, intending to send > > them email asking whether the Radioddity/QYT cable was likely supported. > > They had a button on their home page to download a serial detection app, > > and when I did that, it saw the cable immediately and gave me a link to > the > > order page for the correct driver. Three minutes and $9.30 later, I was > > successfully retrieving data from my QB25. I exported it to a CSV file > so I > > can peruse it in Excel. > > > > > > Thanks for the help, guys. If either of you are involved in CHIRP > > development, perhaps you can suggest that mac-usb-serial.com be > mentioned > > on the MacOS Tips page. Their detection app makes it easy to tell whether > > you can get a compatible driver without all the trial and error of > > downloading other drivers. I still don't know what happened to the other > > 2-3 drivers I installed. They said "Installation successful" but I don't > > see them on my Mac. > > > > > > > > > 73, > > > Patty > > > > This is great news. Have fun with your radio and CHIRP. > > > > Jim KC9HI > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Fred McDougall VA6FRM at frmcdo(a)gmail.com > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > >

2 1

Re: [chirp_users] Tyt 9800 Update working with CSV files
by Gary Craig 21 Jan '19

21 Jan '19

Glenn, Thanks for the heads up about open office. I have had issues with excel and open office working with csv files. Did a little research trying to find a good csv editor and ran across this article: How to open CSV files safely with Microsoft Excel SupportAbility exports a number of CSV (Comma Separated Value) data files that can be used by other applications for invoicing, NDIS payment requests and other purposes. THE PROBLEM It is quite common for SupportAbility users to open these exported CSV files using programs like Microsoft Excel to check their contents before importing the file into a third party application such as MYOB. However, when Microsoft Excel opens a CSV file, it attempts to interpret the data in that file and starts making changes to it. For example, if Excel sees something in the CSV file that it identifies as a date (often incorrectly), Excel will change the date format in the CSV file to suit the way that it prefers to dates to be formatted. Unfortunately, this generally has the unintended consequence of breaking the CSV file for the third party application that the CSV was specifically designed for. THE SOLUTION If you need to open a CSV file in Excel without breaking it, here's how to do it: 1. Open a new Excel sheet, select the Data tab, then click 'From Text' in the Get External Data group. 2. Browse to the CSV file and select 'Import'. 3. In step 1 of the Import Wizard choose 'Delimited' as the original data type. Click 'Next'. 4. In step 2 of the Import Wizard choose Comma as the delimiter (deselect the Tab check box) and click 'Next'. 5. In step 3 of the Import Wizard, you tell Excel not to change your formats. With the first column in the Data Preview selected, scroll across to the last column and select it while holding the SHIFT key (all columns should now be selected). Then select 'Text' as the Column Data Format and click 'Finish'. 6. Click OK to insert the data into cell A1 You should now have a spreadsheet with the imported data but without Excel breaking the formatting required for the intended third party application. Remember to export the file from Excel to CSV again before uploading to the third party application if you have made changes. https://help.supportability.com.au/article/250-how-to-open-csv-files-safely… I will try this out when i get a chance and see if it will solve my issues so i can get all my radios programmed correctly. Be blessed! May 2019 be our year of change & growth! Gary Craig Maintenance Webco Industries Texas Distribution 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext. 107 Fax 918-246-7045 gcraig(a)webcotube.com<mailto:gcraig@webcotube.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Glenn At Home Sent: Saturday, January 19, 2019 6:27 PM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: [chirp_users] Tyt 9800 Update This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious Thanks All, I think I got it working. I tweaked the CSV file, at one point, Open Office took out all the values in the offset column, so I opened another file in Excel that was about the same, and I selected the column and copied it and switched over to the file in Open Office and pasted it in. Setting it to the defaults helped, because this time when I imported the file, I think, the VHF is on the left and the UHF is on the right. Not much UHF going on around here to be sure. I need to learn the buttons on the mic other than the number pad and I know the top switch locks some of the keys, including the two top ones. It's good to turn those off, as I find myself pressing keys on that thing just by holding it while punching a button. Anyway, thanks all for helping me get this far. Glenn Sent From My Tabletop

3 4