- Users - lists.chirpmyradio.com

[chirp_users] Cable adapter baofeng to icom ic-2730 ?
by IW2GJV 22 Jan '16

22 Jan '16

hi, i see that is possibile to adapter the baofeng usb cable to the ICOM ic- 2730 ? in how mode i buit this adapter ? PS work CHIRP with ICOM ic-2730 radio to programm the memory ? best 73

1 0

[chirp_users] Pofun UVTEN-4
by Jose Martinez 20 Jan '16

20 Jan '16

Hey guys, I recently Purchased a Pofung UVTEN-4 dual-band handheld. I had thought that chirp would support it when I purchased it, but found out after the fact that it does not (should have made sure first:-( ). In any event are there any plans to support this radio in the near future? -- Que te vaya bien JM

2 3

[chirp_users] Support for BTECH, Juentai & Luiton radios
by raymond reese 20 Jan '16

20 Jan '16

A friend of mine has purchased the first two radios in the list below and I have compared them as well. With regards to the following radios: BTECH: UV-2501 & UV-5001 Juentai: JT-6188 Luiton: LT-898UV Will CHIRP be supporting these radios in the near future? I intend to buy the BTECH unit, whether it is supported by CHIRP or not. Anyone else out there have their own opinions of these radios and similar cousins? 73's Ray

9 14

[chirp_users] Baofeng uv-66
by Randy Elliott 19 Jan '16

19 Jan '16

Greetings to the chirp guru's Just wondering if any development has been done for Baofeng UV-66? Randy VE3JPU(a)me.com

5 13

[chirp_users] Wrong version being reported under Ubuntu
by David Chatterton 18 Jan '16

18 Jan '16

Despite having accepted the latest update to Chirp via the Software Updater and verified under Synaptic Package Manager that the version of Chirp-daily installed is 20160116~wily~1, the About menu item reports CHIRP daily-20151023 and has done so for the most recent updates. I have completely removed and re-installed chirp-daily but still get the same old version on the About CHIRP pane. Is there an image file on Ubuntu that I need to remove manually or is the updated version deficient in some way? David

4 3

[chirp_users] Icom ID-880H
by David Etheridge 18 Jan '16

18 Jan '16

I have a new iMac I can get chirp to read my radio but it will not write to it I keep getting an error saying that chirp can’t see the radio but it just cloned it. I have tried two different cables down loaded the drivers and reinstalled chirp.Thanks for any help. Michael

6 8

Re: [chirp_users] Radio Shack HTX-242
by kc6iih 18 Jan '16

18 Jan '16

I don't think any Radio Shack gear was ever computer programming capably. Jock A. Soutar KC6IIH Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone <div>-------- Original message --------</div><div>From: Willis <wd4chp(a)embarqmail.com> </div><div>Date:01/17/2016 1:44 PM (GMT-08:00) </div><div>To: William Thompson <wthom1(a)aol.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> </div><div>Subject: Re: [chirp_users] Radio Shack HTX-242 </div><div> </div>NO ----- Original Message ----- From: William Thompson via chirp_users To: chirp_users(a)intrepid.danplanet.com Sent: Sunday, January 17, 2016 4:34 PM Subject: [chirp_users] Radio Shack HTX-242 Dos Chirp support Radio Shack ham equipment? 73, Bill KK4ZIU _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 3

[chirp_users] Baofeng UV-5R won't program
by lofty don 18 Jan '16

18 Jan '16

Sir, I recently purchased two of these radios, but am having trouble programming them using the purchased cable that interfaces with the radio and ends in a USB cable. I have tried with both a Windows 10 and a Windows 7 Home pc. I checked the firmware version and saw that it read: BFB297 I check the devices in Windows 10 and it shows com3 or com4, depending on the USB port and it looks good. I click on new and then click on the radio tab and put in com1 or com2 or com3 or com4 and always get an error (vendor is Baofeng and UV-5R). Thanks for any help you can give. Don in sunny Florida

7 8

[chirp_users] Is the ID-880H data protocol documented somewhere?
by John Babrick 18 Jan '16

18 Jan '16

Hello all - I just got an ID-880H and am getting started with D-STAR. I would like to try writing my own applications for programming and controlling the radio, but I cannot find anything that documents what the programming protocol is for the radio. Can someone tell me where it might be documented? I'd like to do things with the radio that CHIRP and the other programs do not do. Any guidance? Thanks in advance John Babrick, N9CNM, Frederick MD

2 3

[chirp_users] Radio Shack HTX-242
by William Thompson 17 Jan '16

17 Jan '16

Dos Chirp support Radio Shack ham equipment? 73, Bill KK4ZIU

2 1