December 2018 - Users - lists.chirpmyradio.com

[chirp_users] TYT TH-9800power levels
by Glenn At Home 17 Feb '19

17 Feb '19

Hi, I tried importing a CSV file from my Baofeng into my new radio, the TYT, and after importing it, I read that all the power levels are on low. I noticed that I could use the properties to change it, but that is a lot of fields to do that to. When I open that CSV file in Excel, it shows that field as a 5 if I'm reading the correct field. If that is not the field, then the field with the power is not showing up in Excel. Also, while importing it, it encountered an error on line 160, but that is just one of the CB frequencies I put in, but it is not the first field, it is about half-way through the CB frequencies, I don't know what that is about. Thanks for any thoughts. Glenn Sent From My Tabletop

3 4

Re: [chirp_users] chirp_users Digest, Vol 120, Issue 13ityt9800
by Nick 16 Jan '19

16 Jan '19

You may want to rethink your bands on the Right and Left sides.They are reversed according to my radio. I often get lost in thought and that's OK!Nick K7NQB 73 ---------- Original Message ---------- From: P² P² via chirp_users <chirp_users(a)intrepid.danplanet.com> To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 120, Issue 13ityt9800 Date: Thu, 27 Dec 2018 13:29:56 -0700 I have my latest file if you want to play with one….reply to lr60(a)yahoo.com All bands, including 6 and 10 will only work on the right side. The left only 2 and 70cm Sent from Mail for Windows 10 From: chirp_users-request(a)intrepid.danplanet.com Sent: Thursday, December 27, 2018 1:04 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 120, Issue 13 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Setting Up The TYT TH-9800 (Glenn At Home) 2. Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Mark Howie) 3. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Dave Phillips) 4. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Mark Howie) 5. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Dave Phillips) 6. Re: Can?t get your program to work on pc or Mac. The pc crashed and the Mac would not let the program run because of security issues??? (Dennis Wage) ---------------------------------------------------------------------- Message: 1 Date: Wed, 26 Dec 2018 19:20:45 -0600 From: "Glenn At Home" <GlennErvin(a)cableone.net> Subject: [chirp_users] Setting Up The TYT TH-9800 To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <7909033147D74A62976313032CC70BBD@NUCPPYH> Content-Type: text/plain; charset="iso-8859-1" Hello, I noticed the settings in Chirp for most, if not all the menu settings for this radio. I'm having trouble setting it up, even though I uploaded some channels into it with Chirp. The thing is, I need to set one side for 6 & 10 meter and the other for UHF. Reading the manual only tells me that these things need to be done, but without someone making a video or manual that is like describing the radio over the phone, or on paper with only text, there is no way for me to know which controls do what. Youtube videos say things like this button or that dial, and the manual have graphics depicting which symbol to look for. I have fiddled around with it, but to no avail. So I'm wondering if there is something in the settings which will assign each side to it's bands. Thanks for any assistance. Glenn Sent From My Tabletop

2 1

[chirp_users] How to analyse the memory map for a new radio type?
by Dan Clemmensen 31 Dec '18

31 Dec '18

I am a new Ham, and I foolishly selected a radio that is not supported by CHIRP. (Yaesu FT-4XR). I wish to add support for it and its recent Yaesu siblings. I have successfully analysed the serial protocol and I can read and write the memory, but I don't know what to do next. Is there a HOWTO somewhere? If not, I can attempt to create one, but some guidance would be appreciated.

3 2

[chirp_users] Request CHIRP Wiki editing access?
by Dan Clemmensen 30 Dec '18

30 Dec '18

How can I request editing access to the Wiki, and what content is appropriate? I have figured out a way to use Linux's usbmon facility to analyse serial communications on a USB/serial programming cable, and I would like to document it, if the Wiki is an appropriate venue.

1 0

[chirp_users] Mobile/web GUI?
by Dan Clemmensen 30 Dec '18

30 Dec '18

I wish to run CHIRP on a Raspberry Pi Zero W in the field, where I may not have a laptop. I wish to connect to the Pi from a smartphone via WiFi and run CHIRP in a web page. Clearly, I could do this using VNC, but the CHIRP UI appears to be oriented toward a real screen of at least 1024x768 or so. SO: is there a UI that will fit better on a smartphone screen? Another alternative might be to run CHIRP on Android and connect a programming cable to the smartphone's USB port, but my Android skills are weak. I will have the Pi in the field anyway, since it will be running Direwolf. Incidentally, CHIRP is really impressive, and it appears to just work when I run it on my Gentoo desktop.

1 0

Re: [chirp_users] chirp_users Digest, Vol 120, Issue 13ityt9800
by P² P² 27 Dec '18

27 Dec '18

I have my latest file if you want to play with one….reply to lr60(a)yahoo.com All bands, including 6 and 10 will only work on the right side. The left only 2 and 70cm Sent from Mail for Windows 10 From: chirp_users-request(a)intrepid.danplanet.com Sent: Thursday, December 27, 2018 1:04 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 120, Issue 13 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Setting Up The TYT TH-9800 (Glenn At Home) 2. Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Mark Howie) 3. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Dave Phillips) 4. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Mark Howie) 5. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Dave Phillips) 6. Re: Can?t get your program to work on pc or Mac. The pc crashed and the Mac would not let the program run because of security issues??? (Dennis Wage) ---------------------------------------------------------------------- Message: 1 Date: Wed, 26 Dec 2018 19:20:45 -0600 From: "Glenn At Home" <GlennErvin(a)cableone.net> Subject: [chirp_users] Setting Up The TYT TH-9800 To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <7909033147D74A62976313032CC70BBD@NUCPPYH> Content-Type: text/plain; charset="iso-8859-1" Hello, I noticed the settings in Chirp for most, if not all the menu settings for this radio. I'm having trouble setting it up, even though I uploaded some channels into it with Chirp. The thing is, I need to set one side for 6 & 10 meter and the other for UHF. Reading the manual only tells me that these things need to be done, but without someone making a video or manual that is like describing the radio over the phone, or on paper with only text, there is no way for me to know which controls do what. Youtube videos say things like this button or that dial, and the manual have graphics depicting which symbol to look for. I have fiddled around with it, but to no avail. So I'm wondering if there is something in the settings which will assign each side to it's bands. Thanks for any assistance. Glenn Sent From My Tabletop

1 0

[chirp_users] Can’t get your program to work on pc or Mac. The pc crashed and the Mac would not let the program run because of security issues???
by B. A. Skipper 27 Dec '18

27 Dec '18

Sent from my iPhone

3 3

[chirp_users] Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214
by Mark Howie 27 Dec '18

27 Dec '18

Hi All I am having difficulties getting CHIRP 20181214 to communicate with *a couple* of Kenwood TH-G71 hand-helds. I am using a brand new BlueMax49ers supplied (FTDI) USB cable. When connected to my Windows 7 Professional (64 bit machine) the driver seems to install fine. (No negative messages etc.) However when I try to use CHIRP (version 20181214) to download from *a couple* of Kenwood TH-G71 hand-helds nothing happens. (no indications of download progress after over 10 minutes waiting). I believe I read somewhere in the CHIRP documentation that there is *no need* to put Kenwood radios into 'clone' or similar mode. I have also tried the same cable on another computer (also with the latest version of CHIRP) and also with 64 bit Windows 7 (Ultimate). I've tried running CHIRP both as a User and as the Administrator. but get the *same result* regardless. Can you please help me to figure out what may be the issue? Thanks in advance Mark Howie ZL1UMK

2 3

[chirp_users] Setting Up The TYT TH-9800
by Glenn At Home 26 Dec '18

26 Dec '18

Hello, I noticed the settings in Chirp for most, if not all the menu settings for this radio. I'm having trouble setting it up, even though I uploaded some channels into it with Chirp. The thing is, I need to set one side for 6 & 10 meter and the other for UHF. Reading the manual only tells me that these things need to be done, but without someone making a video or manual that is like describing the radio over the phone, or on paper with only text, there is no way for me to know which controls do what. Youtube videos say things like this button or that dial, and the manual have graphics depicting which symbol to look for. I have fiddled around with it, but to no avail. So I'm wondering if there is something in the settings which will assign each side to it's bands. Thanks for any assistance. Glenn Sent From My Tabletop

1 0

[chirp_users] Support for CS800D??
by William Liporace 26 Dec '18

26 Dec '18

Hi Folks, I have not looked too much online, but it does not appear that anyone has setup the Chirp to work with the Connect System radios. I happen to have picked up the CS800D. Please correct me if I am wrong... TNX Will WC2L -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz wc2l(a)wc2l.com

2 3