April 2023 - Users - lists.chirpmyradio.com

Re: [chirp_users] New chirp-next build
by Markus Scherer 08 Nov '23

08 Nov '23

Am 29.03.23 um 06:06 schrieb Markus Scherer: > > Grms on the kg-uv980p where did you hear read it?? > > > max > > > Am 29.03.23 um 01:35 schrieb Jeff Gallaway: >> Does anyone know how to unlock gmrs transmit on the Wouxun KG-UV980P? >> I read somewhere that it can be done with chirp but wasn't sure how >> it's done. I think there's another way to do it by downloading a file >> on ham files but I'm more familiar with chirp and would rather go >> that route if it's possible. >> >> >> >> >> Thanks, Jeffrey Gallaway >> >> On Mon, Feb 20, 2023, 12:08 AM <max(a)m-u-m.info> wrote: >> >> Good morning, >> >> I read the post and was patient, but the days of the driver for >> the kg-uv980p have come, so my hopes for the 950p are victorious >> again. >> >> Although the devices look the same, they also make the same only >> the firmware should be different, because if you read the 950 >> with the software from the 980, only the texts are completely >> illegible like "YYYÖ--WWcv" I find that on the Keyboard not at all. >> >> So the driver for that 980 would work, only the fine-tuning is >> missing and I'm not enough a programmer to be able to do that. >> >> The only thing I can do is test if its working, or what do you >> need for the fine tuning, logs or.... >> >> >> >> Max >> >> >> Am 19.02.23 um 16:36 schrieb Martin Cooper: >>> From the FAQ: >>> >>> https://chirp.danplanet.com/projects/chirp/wiki/FAQ#How-can-I-get-my-radio-… >>> >>> and then looking at New Model Requests: >>> >>> https://chirp.danplanet.com/projects/chirp/issues?query_id=15 >>> >>> we find: >>> >>> https://chirp.danplanet.com/issues/1489 >>> >>> So please do not open another new model request. >>> >>> Martin. >>> KD6YAM >>> >>> On Sun, Feb 19, 2023 at 7:26 AM John La <JohnLa(a)usa.net> wrote: >>> >>> . . If your model is not currently in the Supported Radios >>> list, it's >>> possible a request hasn't been submitted. >>> Here's the request procedure for CHIRP-next. >>> ________________ >>> >>> The official CHIRP website is: >>> https://chirp.danplanet.com/projects/chirp/wiki/Home >>> >>> Here's the procedure for requesting a new radio... >>> If you would like to open a request, you would need to >>> - Go to the CHIRP website. (link above) >>> - Register to the website (upper right corner) >>> - Select the Issues Tab and verify that the request for the >>> new radio hasn't >>> already been submitted. >>> - If it's not found, select the New Issue tab and submit >>> your request. >>> - Check back periodically to review the status of your request. >>> At that time a volunteer interested in taking on the project >>> will respond to >>> the request. >>> In most cases, a loaner radio is required so the software >>> can be backward >>> engineered and tested. >>> >>> Stay safe and healthy. >>> John K3NXU >>> >>> https://www.Miklor.com <https://www.Miklor.com> >>> https://www.Miklor.com/DMR/ <https://www.Miklor.com/DMR/> >>> https://www.Miklor.com/GMRS/ <https://www.Miklor.com/GMRS/> >>> >>> >>> -----Original Message----- >>> From: chirp_users-bounces(a)intrepid.danplanet.com >>> [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of >>> max(a)m-u-m.info >>> Sent: Sunday, February 19, 2023 9:26 AM >>> To: chirp_users(a)intrepid.danplanet.com >>> Subject: Re: [chirp_users] New chirp-next build >>> >>> Hi everone, >>> >>> >>> i have ask i there are any plans to ad the wouxun kg - >>> uv950p, but got >>> no answer. >>> >>> >>> So i try it again. >>> >>> >>> >>> THX >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to John LaMartina at johnla(a)usa.net >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please email >>> chirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive: >>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Martin Cooper at mfncooper(a)gmail.com >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please email >>> chirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive: >>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to max202 atmax(a)m-u-m.info >>> To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please emailchirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Jeff at jeffrey.gallaway(a)gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com >> To report this email as off-topic, please email >> chirp_users-owner(a)intrepid.danplanet.com >> Searchable archive: >> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to max202 atmax(a)m-u-m.info >> To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com >> To report this email as off-topic, please emailchirp_users-owner(a)intrepid.danplanet.com >> Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

2 3

[chirp_users] Can't install on Ubuntu 23.04
by David Spoelstra 10 May '23

10 May '23

I'm following these instructions: https://chirp.danplanet.com/projects/chirp/wiki/ChirpOnLinux $ pip3 install chirp-20230425.tar.gz error: externally-managed-environment × This environment is externally managed ╰─> To install Python packages system-wide, try apt install python3-xyz, where xyz is the package you are trying to install. If you wish to install a non-Debian-packaged Python package, create a virtual environment using python3 -m venv path/to/venv. Then use path/to/venv/bin/python and path/to/venv/bin/pip. Make sure you have python3-full installed. If you wish to install a non-Debian packaged Python application, it may be easiest to use pipx install xyz, which will manage a virtual environment for you. Make sure you have pipx installed. See /usr/share/doc/python3.11/README.venv for more information. note: If you believe this is a mistake, please contact your Python installation or OS distribution provider. You can override this, at the risk of breaking your Python installation or OS, by passing --break-system-packages. hint: See PEP 668 for the detailed specification. So I tried pipx: $ pipx install chirp-20230425.tar.gz Fatal error from pip prevented installation. Full pip output in file: /home/david/.local/pipx/logs/cmd_2023-04-25_11.52.02_pip_errors.log Some possibly relevant errors from pip install: ERROR: Could not find a version that satisfies the requirement chirp-20230425-tar-gz (from versions: none) ERROR: No matching distribution found for chirp-20230425-tar-gz Error installing chirp-20230425-tar-gz. Any ideas?

9 20

[chirp_users] Kenwood d710g - clone mode
by Chris Vandivere 30 Apr '23

30 Apr '23

I have a D710G I’m trying to upalcate using chirp. I have a baseline image taken with kenwood software as a backup that I’ve been rolling back to as I troubleshoot. I initially take a read from the radio (plugged into the radio, not the display) add new simplex and repeaters to memory, write to the radio and when it comes back up I have channels on the display(instead of frequencies it displays CH followed by the memory number) and no VFO mode or access to the menus. Any ideas where I’ve gone astray? Thanks Chris N2CDV

2 1

[chirp_users] Kenwood TS 590s out of ham band receive channels
by Loren Melton WB9OST 28 Apr '23

28 Apr '23

am new to this group, so don't beat me up to bad. i can not find the answer to this question, but I am sure it has been answered before. When trying to program in live mode, Swl, Aircraft, and other freq. not in the ham bands it stops and reports out of band. In clone mode it asks me to click on special channels toggle button of the memory editor. No toggle button to be found. Is their a way to program Rx freq. only with this software. Thanks Loren wb9ost

4 4

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 27 Apr '23

27 Apr '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: d4e6bb5d mml_jc8810.py driver: fix bugs - fixes #10548 312c7886 Add Wouxun KG-UV9G Pro --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 25 Apr '23

25 Apr '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 45e2778e Wouxun 9 series radio channel issue 21fc7509 Fix Wouxun 9 series Name trailing F deletion 7ba16aac Add BTECH UV-25X4_G2 - fixes #10543 198251b8 Add BTECH UV-25X2_G2 - fixes #10542 93aa35b2 btech.py: update syntax in preparation for #10542 and #10543 --

1 0

Re: [chirp_users] Windows 11
by Dave B 24 Apr '23

24 Apr '23

Or... Buy a proper "Genuine" FTDI based cable. No more problems after that. If your supplier/seller cannot guarantee a genuine FTDI based product, look elsewhere. (Or build the cable assembly yourself.) If you use out of date hardware and drivers, & then have to stop Windows from updating, you are leaving yourself wide open to all sorts of other possible problems. If your PC then gets hit with something nasty, then others on the same network might be liable to getting bad stuff too. Just how much domestic trouble can you survive? You buy cheap, you often get poor quality. End of. (Why do some Ham's pay top$£€ etc for some rig's, then penny pinch on accessories?) 73. Dave G8KBV Who followed the instructions on the website, and now have the new version of Chirp happily running on a fresh install of LMDE* just fine. Many thanks to whoever put those instructions together. VERY much appreciated. (* Linux Mint Debian Edition.)

10 12

[chirp_users] Installing On Ubuntu
by K0LNY_Glenn 21 Apr '23

21 Apr '23

Hi, I downloaded the windows installer, but I am wondering how to install Chirp on Ubuntu now. On the chirp page, I entered on repository, and was taken to a github page. Does this mean we have to install Chirp through github, or is there still a repository we can add to Ubuntu? Thanks. Glenn

2 1

Re: [chirp_users] chirp_users Digest, Vol 172, Issue 17
by Iñigo Zapata 21 Apr '23

21 Apr '23

Hi again. This is what I see in your post, even when you try to post the original links: https://u.cubeupload.com/Wingmann/imagen20230421235543.png This is what I get when I go to the official website and try to download the only software they have (a password prompt): https://u.cubeupload.com/Wingmann/imagen20230421235708.png I had already found the website at en.qsfj.com, with the product page being 279, etc. It just doesn't seem to work from here, not even through a VPN, which is weird. Thanks for your help! Hello, > > > I just checked and the link is working fine. The replaced link is just > replaced by a redirect link by my email sending system. The problem seems > to be on your side. > The original links are: > 1st link is > http://link.bbqporkmccity.com/ls/click?upn=aMOMx1SMz1gKqo3ifUC0d3JepWYkulH9… > qsfj. com/ > 2nd link is > http://link.bbqporkmccity.com/ls/click?upn=aMOMx1SMz1gKqo3ifUC0d3JepWYkulH9… > qsfi. com/products/279 > 3rd link is > http://link.bbqporkmccity.com/ls/click?upn=aMOMx1SMz1gKqo3ifUC0d4Rwv8Sanbkz… > qsfj. com/TG-K10AT-1.0setup.zip?download > > Please remove the extra spaces above. Thank you. >

1 0

[chirp_users] Baofeng UV-17 Plus
by Ilia Lin 21 Apr '23

21 Apr '23

Hello, Did someone succeed in programming the Baofeng UV-17 Plus with Chirp? Any suggestions, before I open a new model request? BR, Ilia Lin

3 3