January 2013 - Users - lists.chirpmyradio.com

[chirp_users] UV5R
by Harvey Iri 04 Feb '13

04 Feb '13

Hello I am having a small issue I tries to program my UV5R with the frequencies of my job and I cannot transmit on them, all it does is receive my co-workers, but no transmit. On my repeaters it works fine. the frequencies in question are in the 161 MHZ and 162 MHZ range. I used the Baofeng Software, and did not work. So then I used the Chirp and was able to put it on the radio but again no transmit. Version on my radio is the older version. If there is any other software I can use to unlock those 2 frequencies let me know, if you have any questions for more information just email me. Thanks, Harvey.

7 10

Re: [chirp_users] UV5R
by Bret Hedrington 31 Jan '13

31 Jan '13

The stable build does not support the uv-5r radios… You have to use the latest daily build… Try this one… http://trac.chirp.danplanet.com/chirp_daily/daily-20130128 Bret From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Bernie Thames Sent: Thursday, January 31, 2013 11:05 AM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] UV5R I downloaded Chirp and have what I assume is the last stable build. However, I just got my radio, which is a Baofeng UV-5RA with BFB297 firmware. I went back to the website expecting to have this build since the one I downloaded 0.2.3 does not have my handheld. I went to the repository and couldn’t find a link that included mine. Where can I find this one as, I’d at least like to have the build which is 2012-2221222 (I think). Regards, Max From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina ? Sent: Thursday, January 31, 2013 8:55 AM To: Harvey Iri; Discussion of CHIRP Subject: Re: [chirp_users] UV5R I would guess you need the access tones to work properly. CHIRP should be able to program you radio with no problem. ----- Sent via iPadX On Jan 31, 2013, at 7:51 AM, Harvey Iri <kp4gyo(a)yahoo.com> wrote: Hello I am having a small issue I tries to program my UV5R with the frequencies of my job and I cannot transmit on them, all it does is receive my co-workers, but no transmit. On my repeaters it works fine. the frequencies in question are in the 161 MHZ and 162 MHZ range. I used the Baofeng Software, and did not work. So then I used the Chirp and was able to put it on the radio but again no transmit. Version on my radio is the older version. If there is any other software I can use to unlock those 2 frequencies let me know, if you have any questions for more information just email me. Thanks, Harvey. _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

3 4

[chirp_users] CHIRP and Yaesu VX-7R
by John Randle 31 Jan '13

31 Jan '13

I have used CHIRP to download my VX-7R's configuration (previously created with VX-7 Commander) and noted that some of the radio-wide features were not displayed .. only the contents of the specific memory channels. Is there any plan to address additional configuration items as is done for the UV-5R? I also did not see a FMN or half deviation setting. - John 73's de K9RSQ

4 5

[chirp_users] Baofeng Models and Cables
by ALAN 31 Jan '13

31 Jan '13

My question is, with all the different models. Just what is the difference if any between model a-b-c- and model E for instance. My model "E" will not work with my plain UV-5R. The dealer I bought it from is saying that I need a cable specific for this model. Is this untrue? Is there a difference that demands another cable? If so what newer model should I get as I try to return the two I bought for a friend and myself. Very Disappointed Thanks Alan

4 5

Re: [chirp_users] Baofeng Models and Cables
by Bret Hedrington 30 Jan '13

30 Jan '13

Are you running the latest daily build of chirp? Also hold down the 3 button while turning on the radio and get the firmware version… It will be BFB### Bret From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of ALAN Sent: Wednesday, January 30, 2013 9:03 PM To: JohnLa(a)usa.net; 'Discussion of CHIRP' Subject: Re: [chirp_users] Baofeng Models and Cables I thought so myself, but it is having problems with the "E" model and is not connecting. The nice new case looks stronger, harder plastic and a shinny metal front. Just will not connect. Very frustrating. I use it for work and ham both, just love it. Alan KC9IMF From: John LaMartina <JohnLa(a)usa.net> To: 'ALAN' <mmmja5(a)yahoo.com>; 'Discussion of CHIRP' <chirp_users(a)intrepid.danplanet.com> Sent: Wednesday, January 30, 2013 8:54 PM Subject: RE: [chirp_users] Baofeng Models and Cables Alan, All cables for the UV5R, RE, RA, R+ etc are all compatible. CHIRP will also work with the entire series of UV5R. John K3NXU From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of ALAN Sent: Wednesday, January 30, 2013 9:48 PM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Baofeng Models and Cables My question is, with all the different models. Just what is the difference if any between model a-b-c- and model E for instance. My model "E" will not work with my plain UV-5R. The dealer I bought it from is saying that I need a cable specific for this model. Is this untrue? Is there a difference that demands another cable? If so what newer model should I get as I try to return the two I bought for a friend and myself. Very Disappointed Thanks Alan

2 1

Re: [chirp_users] CHIRP and Yaesu VX-7R
by John Randle 30 Jan '13

30 Jan '13

Thanks for the update guys ... CHIRP is a fantastic product. I was very surprised to find the breadth and depth of radios that it supports. Not having all the bells and whistles of a vendor specific product does not impact from its usability in any way. Focusing on the memory channels as a priority makes good sense. Keep up the great work ... it is greatly appreciated. -- John 73's de K9RSQ

1 0

[chirp_users] CHIRP and the Boafeng UV-5RA
by Tom Reis 30 Jan '13

30 Jan '13

Heloo, Has anyone found a way to use CHIRP with the Baofeng UV-5RA? Thanks, 73 Tom, NØVPR

8 10

Re: [chirp_users] CHIRP and the Boafeng UV-5RA
by Bret Hedrington 29 Jan '13

29 Jan '13

To all. There is some difference even between BFB927 radios.Some minor changes at the factory. I sent the bug 463 and 465. Jim was working on this.I know the latest build seems to have solved the issues with all the ones I have here.(8 units) I'd suggest: #1 do a menu 40 reset all. #2 uninstall chirp #3 get the latest daily build. #4 download from the problem radio.The image from one BFB297 to Another BFB297 can be two different images and not compatible because of the change in firmware on the radio.Even though they are all BFB297 there seems to be two versions of BFB297.. #5 Upload the image to test compatibility. #6 you can try to upload to other radios with the two versions but may only get the memories not the extra goodies. #7 let me know if there is anything else. I've been doing some digging as well.There is a definite difference between some BFB297's to other BFB297's.Knowing the Chinese they fixed or added something and never bothered to give it a new revision.this happens! Leo, If you need some help let me know.E-mail me at my local address bret.hedrington(a)brethedrington.com I've got all my radios working perfect. Now I keep all my radios numbered via the ANI code.So I keep and image per radio on the networks.makes it easier. Bret Hedrington From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Leo Ryan Sent: Tuesday, January 29, 2013 10:13 PM To: JohnLa(a)usa.net; Discussion of CHIRP Subject: Re: [chirp_users] CHIRP and the Boafeng UV-5RA I just got this in, maybe the problem will be resolved by the new daily build. Should I completely remove chirp before installing the new build, or not? Leo On 1/29/2013 9:33 PM, John LaMartina wrote: Leo, I just read this bug was covered in Bug Report 463. The bug report says it was resolved 4 hours ago. There will probably be a New Daily Build tomorrow morning to resolve this. Tomorrow will be a brighter day :- ) John K3NXU From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Leo Ryan Sent: Tuesday, January 29, 2013 9:49 PM To: Discussion of CHIRP Subject: Re: [chirp_users] CHIRP and the Boafeng UV-5RA I have two exactly the same UV5RA's. I bought them together on Amazon.com. Chirp will download from both radios just fine, but on one I get an error code "incompatible firmware version bfb299 bfb297" . I have checked the firmware on both units it is BFB297. Leo On 1/29/2013 7:10 PM, Jim Unroe wrote: Tom, CHIRP works fine with all UV-5Rs. The A, B, C, +, PLUS, etc only designate differences in case styles. The electronics inside is the same (except for differences between firmware versions). Explain how is it that CHIRP does not work for you? Jim KC9HI On Tue, Jan 29, 2013 at 7:19 PM, Tom Reis <twr(a)tomreis.com> wrote: Heloo, Has anyone found a way to use CHIRP with the Baofeng UV-5RA? Thanks, 73 Tom, NØVPR _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

1 0

Re: [chirp_users] CHIRP and the Boafeng UV-5RA
by Leo Ryan 29 Jan '13

29 Jan '13

The answers are 1= Yes 2= yes 3=I tried that 4= Yes I did 5= Yes it is always the same radio that gives me trouble, I know this because I have uploaded repeaters to the 1st radio, and it had more frequencies loaded. It is only one radio that is a problem. I believe it may be more cost effective just to purchase an additional unit and see if it still occurs. I can have one in in about two or three days.I will see if that works. Also there is a Baofeng dealer in my city. Leo On 1/29/2013 9:14 PM, John Gorena wrote: > > If it works on one, it should work on both.I would try a few things to > diagnose the issue....Here are some ideas but they might sound strange > to you. > > 1)Does it work on the first radio you try but not the second? > > 2)Did you verify that the COM port on the cable is correct between radios? > > 3)May be you need to restart the program between radios and download > data then upload on each? > > 4)Did you reboot your computer between radios and download then upload? > > 5)No matter what order you try, it is the same radio that has the problem? > > The answers to these questions might reveal an operation procedure.Or > one radio is just really the problem??? > > John > > *From:*chirp_users-bounces@intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Leo > Ryan > *Sent:* Tuesday, January 29, 2013 8:51 PM > *To:* Discussion of CHIRP > *Subject:* Re: [chirp_users] CHIRP and the Boafeng UV-5RA > > Like I said, it won't upload. > Thanks, Leo > > On 1/29/2013 7:02 PM, John Gorena wrote: > > Yes, > > Use the latest Daily build.Connect your cable...Receive the data > first then upload the changes.You do not have to push buttons to > receive or transmit... > > John > > *From:*chirp_users-bounces@intrepid.danplanet.com > <mailto:chirp_users-bounces@intrepid.danplanet.com> > [mailto:chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of > *Tom Reis > *Sent:* Tuesday, January 29, 2013 6:19 PM > *To:* chirp_users(a)intrepid.danplanet.com > <mailto:chirp_users@intrepid.danplanet.com> > *Subject:* [chirp_users] CHIRP and the Boafeng UV-5RA > > Heloo, > > Has anyone found a way to use CHIRP with the Baofeng UV-5RA? > > Thanks, > > 73 > > Tom, NØVPR > > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users

1 0

Re: [chirp_users] CHIRP and the Boafeng UV-5RA
by Leo Ryan 29 Jan '13

29 Jan '13

Like I said, it won't upload. Thanks, Leo On 1/29/2013 7:02 PM, John Gorena wrote: > > Yes, > > Use the latest Daily build.Connect your cable...Receive the data first > then upload the changes.You do not have to push buttons to receive or > transmit... > > John > > *From:*chirp_users-bounces@intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] *On Behalf Of *Tom > Reis > *Sent:* Tuesday, January 29, 2013 6:19 PM > *To:* chirp_users(a)intrepid.danplanet.com > *Subject:* [chirp_users] CHIRP and the Boafeng UV-5RA > > Heloo, > > Has anyone found a way to use CHIRP with the Baofeng UV-5RA? > > Thanks, > > 73 > > Tom, NØVPR > > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users

2 1