- Users - lists.chirpmyradio.com

Re: [chirp_users] cable for kenwood th-f7
by IW2GJV 25 Jan '16

25 Jan '16

Has anyone built an interface for an Icom IC-T7H, I've had one for years and programming it from the key pad is OK, just thought there might be something even easier W2ZDP why built a cable, i used the low cost cable for BAOFENG, work well, used the original kenwood program or CHIRP . i used this cable into the kenwood th-f7 bst 73 de Rudy - IW2BSF

3 3

[chirp_users] Data changes from "Upload" to "Download"
by Rick, KE0HCN 25 Jan '16

25 Jan '16

Wonder why the data I upload to my radio is changed when it downloads. Specially: When I upload the tone of 100 MHz, when downloaded from the radio, the 100 MHZ is changes to 88.5 MHz. Also the Tone Mode changes from Tone to TSQL? Why is that? Radio: Baofeng F8HP CHIRP: CHIRP daily-20160110 -- Rick Dunagan KE0HCN

5 10

Re: [chirp_users] chirp_users Digest, Vol 85, Issue 16, messages 6 & 7
by David Chatterton 24 Jan '16

24 Jan '16

Thanks for the advice. I removed the existing installation of chirp-daily using the Synaptic Package Manager (despite the fact that it was reporting the installed version as the latest 20160116~wily~1). I then searched for any files on the computer that had a name including chirp using the Files app and deleted them using terminal and sudo rm (-r) in the folder where they were found. (Some seemed to belong to previous installations of chirp.) I then did a fresh installation of chirp-daily listed under Amateur Radio in the Synaptic Package Manager. Chirp-daily now reports the correct (and latest) version in its About window. It remains to be seen what happens when the Software Updater offers the next version. (I have the chirp-snapshots ppa listed in Other Software in the Software & Updates panel.) Hopefully it will now report the version installed. Regards, David Chatterton On 19/01/16 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: Icom ID-880H (Ryan Collier) > 2. Re: Baofeng uv-66 (John LaMartina ?) > 3. Re: Baofeng uv-66 (Randy Elliott) > 4. Re: Chirp and Icom IC-7200 (Bill) > 5. Re: Chirp and Icom IC-7200 (Joseph scanlan) > 6. Re: Wrong version being reported under Ubuntu (Jim Unroe) > 7. Re: Wrong version being reported under Ubuntu (Tom Hayward) > 8. Re: Baofeng uv-66 (Jim Unroe) > 9. Re: Chirp and Icom IC-7200 (Marco Filippi IZ3GME) > 10. Re: Baofeng uv-66 (Randy Elliott) > 11. Re: Baofeng uv-66 (Jim Unroe) > 12. Re: Baofeng uv-66 (Randy Elliott) > 13. Re: Baofeng uv-66 (Jim Unroe) > 14. Re: Baofeng uv-66 (Randy Elliott) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 18 Jan 2016 15:34:11 -0500 > From: Ryan Collier <kb8pmy(a)kb8pmy.net> > Subject: Re: [chirp_users] Icom ID-880H > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAAoTAm=gWOhQ+-vNikCt7_aWFysO19j0u2q9AHcQJ8cB5wp2Rg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > This is for all DSTAR icoms. Did you get it to save the urcall information? > I can download from the radio but it will not upload back in to memory with > the new changes. > On Jan 18, 2016 12:51 PM, "Ryan Tourge" <ryan.tourge(a)gmail.com> wrote: > >> That would make sense. The Icom software has it in banks of 100. >> >> On Mon, Jan 18, 2016 at 10:27 AM, Drew from Zhrodague < >> drewzhrodague(a)zhrodague.net> wrote: >> >>> On 1/16/16 1:22 PM, David Etheridge wrote: >>>> I have a new iMac I can get chirp to read my radio but it will not >>> write to it I keep getting an error saying that chirp can?t see the radio >>> but it just cloned it. I have tried two different cables down loaded the >>> drivers and reinstalled chirp.Thanks for any help. >>> >>> I had to make sure each frequency memory was assigned to one of >>> the >>> banks before the radio would accept the upload from CHIRP. >>> >>> I suspect there is a way to force these constraints, but I am not >>> so >>> familiar with Python yet =_) >>> >>> Also, it seems you can only have upto 100 memeories per bank. >>> This is >>> from memory with my banging on it for a few days. >>> >>> -- >>> >>> Drew from Zhrodague >>> post-apocalyptic ad-hoc industrialist >>> drew(a)zhrodague.net >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >>> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com >> >

1 0

[chirp_users] 92AD Reading memories
by Wenlock Burton 24 Jan '16

24 Jan '16

OK, seems I had an intermittant loss of connectivity, got it to read the bank data for A and this is the error report in terminal: Exception in thread Thread-3:Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner self.run() File "/usr/lib/pymodules/python2.7/chirp/ui/common.py", line 261, in run job.execute(self.radio) File "/usr/lib/pymodules/python2.7/chirp/ui/bankedit.py", line 138, in execute mappings = self.__model.get_memory_mappings(mem) File "/usr/lib/pymodules/python2.7/chirp/drivers/icf.py", line 544, in get_memory_mappings index = self._radio._get_bank(memory.number) File "/usr/lib/pymodules/python2.7/chirp/drivers/ic9x.py", line 83, in _get_bank return mem._bankAttributeError: Memory instance has no attribute '_bank' 799 is the last valid memory in the 92AD 'A' band so something in memory mappings maybe? Wenlock

1 0

[chirp_users] IC-92AD - Reading memories
by Wenlock Burton 24 Jan '16

24 Jan '16

Hi, I worked out how to edit the driver file and changed to 799 to match the radio. Now it reads to 799 and displays Completed getting memory 799 (idle) in the status bar Memories (Band A) has been read but the error report is: Exception in thread Thread-9:Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner self.run() File "/usr/lib/pymodules/python2.7/chirp/ui/common.py", line 261, in run job.execute(self.radio) File "/usr/lib/pymodules/python2.7/chirp/ui/bankedit.py", line 40, in execute self.__editor.mappings.append((mapping, mapping.get_name())) File "/usr/lib/pymodules/python2.7/chirp/drivers/ic9x.py", line 59, in get_name banks = self._model._radio._ic9x_get_banks() File "/usr/lib/pymodules/python2.7/chirp/drivers/ic9x.py", line 233, in _ic9x_get_banks banks = ic9x_ll.get_banks(self.pipe, self.vfo) File "/usr/lib/pymodules/python2.7/chirp/drivers/ic9x_ll.py", line 530, in get_banks rframes = frame.send(pipe) File "/usr/lib/pymodules/python2.7/chirp/drivers/ic9x_ll.py", line 174, in send raise errors.InvalidDataError("No response from radio")InvalidDataError: No response from radio Hmm, seems that 849 could be in other files? Wenlock

1 0

[chirp_users] IC-92AD driver script
by Wenlock Burton 24 Jan '16

24 Jan '16

Hi, I realised I needed to be root to get into the Chirp folders in terminal, issued sudo -i and typed my password. Cool. Changed 849 to 799 and saved. Testing Wenlock

1 0

[chirp_users] Thanks Guys
by Wenlock Burton 24 Jan '16

24 Jan '16

Hi, I was trying to get to /usr/lib/pymodules/python2.7/chirp/drivers/ic9x.py in terminal but the chirp folder did not appear to be in the python2.7 folder. I tried ls -a but there were no folders listed in the output. ls -ad should have shown it but again nothing. As long as I can find it in synaptic I can have a look at the code. Thanks for putting up with me. Wenlock

1 0

[chirp_users] Where are the Chirp driver files in Ubuntu
by Wenlock Burton 24 Jan '16

24 Jan '16

Hi, I'd like to have a go at seeing if I can spot the issue in the IC-92AD python script but not getting anywhere finding the files. If anyone can give me a direction I'd much appreciate it. Thanks Wenlock

3 3

[chirp_users] test
by sparks4151＠aol.com 23 Jan '16

23 Jan '16

testin the e-mail W2ZDP

4 3

[chirp_users] Icom ID-5100
by Gary P. Merschdorf 23 Jan '16

23 Jan '16

Does Chirp have programming capabilities for an Icom ID-5100? I have been trying to get an answer to this question all week. 73's Gary Merschdorf KD8RMT

3 2