- Users - lists.chirpmyradio.com

[chirp_users] Zastone MP-300
by Eric Chopin 16 Jan '17

16 Jan '17

Greetings CHIRPers, I am having problem with a ZASTONE MP-300. I have tried all versions of CHIRP....old and latest version. I have the proper 'Prolific' cable and it works with all other Chinese radios..Baofeng, TYT, Wouxon, etc. but noe the MP-300 When I try to program the MP-300 even when CHIRP suggests trying to use other makes as they are clones of the MP-300, it still cannot communicate with the radio. The message I get is 'Radio did not enter clone mode' I am using XP Pro Any suggestions please 73's Eric

3 2

[chirp_users] Chrip problem - IOError: [Errno 13] Permission denied:
by Larry Stewart 16 Jan '17

16 Jan '17

With Windows 10 it not start comes up with a log error. The log error is IOError: [Errno 13] Permission denied: 73, Larry Stewart W2SWX

2 1

[chirp_users] New Daily Build
by Build System 15 Jan '17

15 Jan '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170115 A list of the changes included in this build (since the last daily) follows: Changes for Build #458 [Tom Hayward <tom(a)tomh.us>] Add query/import from DMR-MARC repeater database. #4411

1 0

[chirp_users] 6. MAC OS SIERRA (Tom Hayward) (Eric Chopin)
by Eric Chopin 13 Jan '17

13 Jan '17

Hello gentlemen, Thank you Tom for your help. Neil, I will give it a shot and see what's what. Thank you both 73's Eric

1 0

[chirp_users] MAC OS SIERRA (Tom Hayward)
by Eric Chopin 13 Jan '17

13 Jan '17

Hello Tom, Thank you for the procedure, though I am a bit reluctant to disable the SIP installed in the OS....I am not suggesting that there is some malware in CHIRP nonetheless the possibility will always be there. Lets assume I disable the csrutil to allow CHIRP to work, if I re-enable csrutil after I have run CHIRP, will this action prevent me using CHIRP again or will the OS remember that csrutil allowed CHIRP earlier on? Looking forward to suggestion 73's

4 3

[chirp_users] Installing Chirp-daily on Ubuntu 16.04
by randy strobel 12 Jan '17

12 Jan '17

Hi all! Last night I installed chirp (yesterday's daily, 20170111) on Ubuntu 16.04. I tried by adding the respiratory and running sudo apt-get install... from the command line and also by downloading the tarbal. Both ways gave me a 'locale not supported by C library...' message when I opened it. Has anyone else had this problem? Can anyone help me with with this? Thanks,

6 8

[chirp_users] Kenwood TK-280 development starting, want to help?
by Pavel Milanes Costa 12 Jan '17

12 Jan '17

Hi to all, I'm working remotely with a willing user to get a serial log one of this radio (TK-280) and start the development of a basic Chirp's driver. My goal is to make at least a successful download/upload script and parse the general channel data for this model (TK-280), my experience points that making support for one member of the family will make trivial to extend it to the rest of the family; by looking to the OEM software the whole family could be: TK-780/880/280/380/980/981/480/481 Further development (beyond upload/download and simple channel data) will be very unlikely from my side as I don't have a radio at reach to test and hack at this time. *Side note:* I live in Cuba island, sending me a radio is not an option (yet), I must work remotely and some users must cooperate with me in the testing of this driver; I have done that before is hard work but works, the BTECH and brothers radios support for chirp was made this way with the great help of Jim Unroe. Users of the Kenwood TK-280: if you like your radio supported please upload some portmon logs to the below issue (link), instructions for doing that here: http://chirp.danplanet.com/attachments/2257/how%20to%20portmon.doc The main thread/issue of the development will be this: http://chirp.danplanet.com/issues/4395 73 Pavel CO7WT

2 2

[chirp_users] New Daily Build
by Build System 11 Jan '17

11 Jan '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170111 A list of the changes included in this build (since the last daily) follows: Changes for Build #457 [Aaron Pelly <aaron(a)pelly.co>] [TH-D74] Allow selection of /dev/ACM* Fixes #4389 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Add Aliases for Various Retevis Radios This patch add an alias for each of the following Retevis radio models. RT5 with 2 power levels (Baofeng UV-5R variant) RT5 with 3 power levels (Baofeng BF-F8HP variant) RT-5RV (Baofeng UV-5R variant) releated to #4375

1 0

[chirp_users] New Daily Build
by Build System 10 Jan '17

10 Jan '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170108 A list of the changes included in this build (since the last daily) follows: Changes for Build #456 [Jim Unroe <rock.unroe(a)gmail.com>] [LT-588UV] Add New MCU Version to LT-588UV Support This patch provides support for a new MCU version discovered by Ray Strickoff. Bug #4369 [Tom Hayward <tom(a)tomh.us>] Fix RadioSettingValueMap marked changed upon creation. #4371 RadioSettingValueMap instances were marked changed regardless of whether they were actually changed. This was due to calling set_value() from within __init__(). This fix reintializes has_changed to False at the end of __init__() so that RadioSetting.has_changed() is accurate. [Tom Hayward <tom(a)tomh.us>] Add an open dialog filter for all files. #4359

5 9

[chirp_users] Tone frequencies disappearing
by chris p 10 Jan '17

10 Jan '17

Hello to the group, I searched the FAQ site but could not find this question..I am programming the uv-82hp. When I put in the receive freq, name, tone squelch, both tone frequencies, and so onthey remain in their respective spots. But when I start to input the tones in the next line down, the tone or tones from the previous line disappear. I have to re put them in but the same thing happens with the current column. Thanks in advance for any help on this. 73's, de wa6cp-chris - - - 1 Attachment - No Preview

2 1