- Users - lists.chirpmyradio.com

[chirp_users] Oh Happy Day !!!!
by Bruce LeGrande 27 Apr '17

27 Apr '17

⁣ Finally got the Ubuntu mini.iso to d/l without error, got a FULL INSTALL of Ubuntu v16.04 on a USB Thumb, got Dans ppa set in the repository, and got 'chirp-daily' to d/l and install..... (thanks to the wifi at Buddha Thai Kitchen in Middletown - best Thai food in the area) Yippee !!!!! Looks like my radios shall finally get programmed... Checked the BTech UV-5X3, the UV-82HP, and have spent the remainder of the afternoon researching freqs and programming the Leixen VV-898S... Need to order the cable for the VX-8DR (Yaesu), and the UV-50x3 (BTech) in the truck, but I see those in the list in Chirp, so I'm very hopeful at this point... Perhaps it's time for good things to start happening here... FINALLY !!! Thanks for putting up with my rants over the last year+... Thanks to all that offered input. And those that silently prayed. 73 - Bruce Sent from BlueMail

4 3

[chirp_users] FT2900
by Eric Chopin 26 Apr '17

26 Apr '17

Greetings again CHIRP'rs I now have a Yaesu FT2900 that I would like to program with CHIRP. I have a Prolific cable and found the 'pin out' on the mike socket ( #4 GRD - #6 CLONE) I go through the sequence to get the radio into 'CLONE' mode and then to 'TX' but the response I get from CHIRP is "The radio is not responding" and "ERROR" on the radio LCD readout. Any offers? 73's Eric

2 2

[chirp_users] FT 270
by Eric Chopin 26 Apr '17

26 Apr '17

Hello Jardy & Todd thank you for the info, I found the pinout diagram and have used a RTSystem cable and their software which all works well. Did not have any luck with CHIRP :-( 73's Eric P.S. I am about to present you all with another request in my next emaail!

1 0

[chirp_users] FT270 programming
by Eric Chopin 25 Apr '17

25 Apr '17

Thanks Baji for the link.... I checked it out and could not locate the file that is mentioned in the 'reddit url.' using CMD prompt in Windows XP... Windows could not locate the file anywhere. I have a couple of Prolific usb dongles that I can wire to usb... but would need the 'pin-outs' for the FT270 Jack plug (TX-RX-GND). Maybe someone out there can help out with a diagram? 73's Eric VE7ECJ

3 2

Re: [chirp_users] Yaesu FT-270
by Baji Panchumarti 25 Apr '17

25 Apr '17

The post at the link below refers to FT-270R & not FT-270, but you may be able to find some additional info: https://www.reddit.com/r/amateurradio/comments/3c49vf/chirp_with_the_yaesu_… -baji. _ On Tue, Apr 25, 2017 at 11:50 AM, Eric Chopin <echopin27(a)gmail.com> wrote: Yeap, i tried with Prolific and FDI and no luck with CHIRP....I have a RT > USB cable and was lent the programming CD by a friend and it all worked > ok...but only with the RT cable & software. > > I would still rather use CHIRP as all my other radios are programmed with > it and also to show my appreciation to all the great CHIRP guy's & girls > out there :-) > > On Mon, Apr 24, 2017 at 12:00 PM, <chirp_users-request@intrepid. > danplanet.com> wrote: > >> >> >> Today's Topics: >> >> 1. FT270R (Eric Chopin) >> 2. Re: FT270R (Todd Bloomingdale) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Sun, 23 Apr 2017 17:53:26 -0700 >> From: Eric Chopin <echopin27(a)gmail.com> >> Subject: [chirp_users] FT270R >> To: chirp_users(a)intrepid.danplanet.com >> Message-ID: >> <CAFe93E1QkcC7y1sFFXbG7XwNqVAadKSj7FOjQgVriGr9sLPgbA(a)mail.gm >> ail.com> >> Content-Type: text/plain; charset="utf-8" >> >> Greetings Don, >> >> You mention that you are able to program your FT270 by selecting 160 in >> CHIRP; what cable are you using? I have an RTSystems USB cable but have no >> success using CHIRP to connect by selecting the FT 160. >> The message I get is either 'Radio did not respond' or 'Unable to load >> header' >> >> Any suggestions? >> >> 73's >> Eric >> VE7ECJ >>

1 0

Re: [chirp_users] chirp_users Digest, Vol 100, Issue 20
by Eric Chopin 25 Apr '17

25 Apr '17

Yeap, i tried with Prolific and FDI and no luck with CHIRP....I have a RT USB cable and was lent the programming CD by a friend and it all worked ok...but only with the RT cable & software. I would still rather use CHIRP as all my other radios are programmed with it and also to show my appreciation to all the great CHIRP guy's & girls out there :-) On Mon, Apr 24, 2017 at 12:00 PM, < chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. FT270R (Eric Chopin) > 2. Re: FT270R (Todd Bloomingdale) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 23 Apr 2017 17:53:26 -0700 > From: Eric Chopin <echopin27(a)gmail.com> > Subject: [chirp_users] FT270R > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CAFe93E1QkcC7y1sFFXbG7XwNqVAadKSj7FOjQgVriGr9sLPgbA@mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > Greetings Don, > > You mention that you are able to program your FT270 by selecting 160 in > CHIRP; what cable are you using? I have an RTSystems USB cable but have no > success using CHIRP to connect by selecting the FT 160. > The message I get is either 'Radio did not respond' or 'Unable to load > header' > > Any suggestions? > > 73's > Eric > VE7ECJ >

1 0

[chirp_users] FT270R
by Eric Chopin 23 Apr '17

23 Apr '17

Greetings Don, You mention that you are able to program your FT270 by selecting 160 in CHIRP; what cable are you using? I have an RTSystems USB cable but have no success using CHIRP to connect by selecting the FT 160. The message I get is either 'Radio did not respond' or 'Unable to load header' Any suggestions? 73's Eric VE7ECJ

2 1

[chirp_users] Kg uv8d plus
by danilo piovan 20 Apr '17

20 Apr '17

Hi I tried to connect chirp with wouxun uv8d plus version without success. ...is this version of uv8d programmable with chirp ? Thanks

2 2

[chirp_users] New User of Chirp
by KEVIN HILLMAN 20 Apr '17

20 Apr '17

Hello to the Group: I just rec'd a Baofeng UV-5R from China, and would like to request information on what the best programming software to use for it. I am hoping to find a program that is not too complex to install and get running. Thanks for your help. Kevin VE7WD

6 5

[chirp_users] No support for UV-82c in most recent versions?
by Daniel Humphries 20 Apr '17

20 Apr '17

I downloaded the daily build of CHIRP 20170414 and proceeded to connect my uv-82c, I didn't think much about the radio list only showing uv-82 and uv-82hp, but when I couldn't get my radio to connect I started to suspect I have a problem. I won't entirely discount the programming cable, but it's not a prolific chipset, it's a CP2102 and I've used it for programming other devices so I know it works, but I have not used this cable with CHIRP so I'm not sure if I have a communication issue, or a model support issue. I looked at the model support page and I can't find the C version as a supported radio. I looked through several of the old versions and couldn't find one that supports the UV-82C anywhere. What version do I need to install to program a UV-82C and where do I find it? Thanks, Daniel

2 1