- Users - lists.chirpmyradio.com

[chirp_users] QYT KT8900
by "クリス (Kris) Francisco" 13 May '17

13 May '17

Hi i buy KT8900 last month only my problem this morning is no TRansmit i try to program in chirp and reset all still the same they have recieve only no transmit, any body can help me? Im new in this Radio. Thank you KH0VL Sent from my iPhone

3 2

[chirp_users] Yaesu FT-8100R Question
by Alan 12 May '17

12 May '17

I do not see the Yaesu FT-8100R listed as a supported radio. Will Chirp work with my FT-8100R ? Thank you. Alan AA6DW

2 1

[chirp_users] Alinco DJ-G7 "T"
by Daniel Curry 12 May '17

12 May '17

I am unable to connect to my Alinco DJ-GT "T" hand held. Alinco programming software works with no problem.

2 1

[chirp_users] Programming a BTECH UV-50X2
by Bob DeFranco 12 May '17

12 May '17

I just ordered a BTECH UV-50X2 and was going to download the latest version of ChiRP to program it. Looking at the list of supported radios, however, I see the UV-50X3 and the UV-5001 (the predecessor to the UV-50X2) but not my radio. Which model should I select? I suppose I could just try different ones and see which works, but I worry about bricking the radio. Any advice? Bob DeFranco

5 8

[chirp_users] DJ-G7
by Daniel Curry 10 May '17

10 May '17

I am unable to program my DJ-G7 hand held. I get no response from the radio. But when I start it sees the com port and DJ-G7EG. -- Daniel Curry California American Legion Amateur Radio Area 2 Commission and Chairman. US Air Force Veteran IPV6 Sage Certified PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92 San Francisco/Silicon Valley AmprNet Co-coordinator [44.4.0.0/16]

1 0

[chirp_users] New Daily Build
by Build System 10 May '17

10 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170510 A list of the changes included in this build (since the last daily) follows: Changes for Build #480 [Dan Smith <dsmith(a)danplanet.com>] Add Rugged RH5R-V2 #4803

1 0

[chirp_users] Jingtong JT-5988HP support
by Shon Edwards 08 May '17

08 May '17

I'm patient and I don't need the support myself any more, but this would be a wonderful radio to get CHIRP working with. I know a lot of people would appreciate it very much. I bought the radio from Amazon a couple of months ago. I had the cable and software. I tried everything. Nothing worked. To give you an idea of what is necessary to program this radio correctly, I'll outline the steps below even this may not be directly on topic. I'm hoping to show just how difficult this radio is to program, so hopefully we can get some CHIRP support soon.. It's the only 12/10W (no one is sure which it really is) radio (HT) I know of. Anyway, here's how I stumbled on a way to program it: 1. I searched google until I found: http://prepari.org/?page= 5988HP#review-JT5988HP.html. 2. Get the disc out that comes with the radio or click here: htpps:// amazon.com/jt-5988/JT-5988+High+Mid+Low.rar and get ready to copy a driver from it to your HDD. 3. Install the s/w. (it's better than the Chinese s/w for programming) 4. Watch the video on how to set up a com port: JT-5988HP-com-port-setup_ HTML-video.mp4. 5. Click on setup. 6. Click on communication port. 7. Select an available com port and number one will be deselected, then OK. 8. Put the Chinese disc in your drive that came with the radio. 9. Click on the subdirectory (folder): USB驱动. Then click on the folder labeled CH340. Find the executable file CH341SRE.exe. You can not run it from its current position because of all the Chinese characters in the path. Copy it to your hard drive and then run it. Install the driver. Click on OK. If you want to see that it's there, I'm tired of writing steps, but you get the picture. 73 de Shon K6QT Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA Home phone: (801) 444-3445 E-mail: sre.1966(a)gmail.com or Shon Edwards 715 Strawberry Creek Private Rd. Bedford, WY 83112 Cell: (307) 248-2104

1 0

[chirp_users] UV-82HP settings question
by Tom Norris 08 May '17

08 May '17

In CHIRP I have Settings > Basic Settings > Display Mode A: 'Name' and Settings > Basic Settings > Display Mode B: 'Frequency' Is there a setting that will allow the Display Mode B: frequencies to stay in sync with Display Mode A: 'Name' when the unit is in Scan mode? Thanks, Tom NB5Q

2 1

[chirp_users] Help
by Brewster 08 May '17

08 May '17

I recently purchased a QYT KT 7900D radio and uploaded frequencies to it using the latest version of CHIRP. The problem is that all the frequencies go into all of the four different bands. The radio as described has four "channels", A-D. What I am trying to do is assign the 2 meter band to channel A, the 220 Mhz band to channel B, the FRS/MURS/GMRS frequencies to channel C, and the 440 Mhz band to channel D. Has anyone had any experience with this radio and frequency allotments such as I describe? Thanks, Bruce AD8K

7 13

[chirp_users] Icom ID-5100, any work on it?
by Chuck Hast 08 May '17

08 May '17

I have one and sure would like to be able to put channels into the SD card that stores the channels (actually sort of a backup to the on board storage) I can send someone files that the Windows program generates which you then copy to the SD card, and then place the SD card in the radio and read it. I can even send you a copy of the original Windows program if you want, (It is free anyhow) I have programmed the radio with the software but find it easier just to pull out the SD card, load it and be done. Would rather do it under Linux rather than have to deal with Windows stupidity. I sure wish I knew how to code as I would have tried my hand at it but I do not.

1 0