- Users - lists.chirpmyradio.com

[chirp_users] Talkcoop kt-8900d
by gary brewer 17 Aug '17

17 Aug '17

Hello k5geb. I have a talkcoop kt-8900 it is the same as the qyt kt-8900d i have tryed using chirp. And the software that comes with the radio i am unable to program it with chirp or there software all help to program this radio would be greatful .gary brewer k5geb Sent from Yahoo Mail on Android

3 2

[chirp_users] Baorfeng transmit block while on reverse frequency
by Eric H 15 Aug '17

15 Aug '17

I program a lot of Boafeng uv-5r radios and have found an issue. I have a few channels I'd like to talk on and others I do not. If the reverse frequency function is turned on when on a channel you can transmit on, it will allow you to transmit on any channel in the radio. Is there a way to stop this from happening? You cannot access the reverse frequency option unless on a channel you can transmit on. Sent from my iPhone

3 6

[chirp_users] How to program.
by J. David Aten 09 Aug '17

09 Aug '17

While some festivals might have their own radios and license, many more, now days, go to a third party that leases radios, and applies for a temporary license. An example is WQXT583. They have 13 frequencies, 850 units, and will be using DMR digital radios. This is very common, as to radio type, and size of the event. So, to find the security frequency, out of all of those, can be very hard to find, and would require extensive listening to figure what each frequency is being used for. The event won't tell you. Sent from my iPad

3 2

Re: [chirp_users] chirp_users Digest, Vol 104, Issue 8
by mike Heightchew 08 Aug '17

08 Aug '17

ok what is it with the bofang radio the UV5 i just put a icom TH7h and it picks the right com portbut not on the bofang radios On Tuesday, August 8, 2017 12:02 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. How to program (Carrie Jackson) 2. Re: How to program (Joe Puma) ---------------------------------------------------------------------- Message: 1 Date: Mon, 7 Aug 2017 19:31:11 -0500 From: Carrie Jackson <mssjacksonifyournasty(a)gmail.com> Subject: [chirp_users] How to program To: chirp_users(a)intrepid.danplanet.com Message-ID: <DFC18ADE-99AB-409F-992A-497B41A5437F(a)gmail.com> Content-Type: text/plain; charset=us-ascii So I have a theoretical question. If one was to attend a festival and wanted to be on security's frequency how would one achieve this using chirp and a Baofeng UV-5R. Theoretically. At Summerset. Miss Jackson ------------------------------ Message: 2 Date: Mon, 7 Aug 2017 20:48:09 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] How to program To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <7B4494F4-B12F-4705-BCC0-D0C52D2A3916(a)yahoo.com> Content-Type: text/plain; charset=us-ascii You would have to know what frequency they are using. CHIRP couldn't help you either way unless you know the frequency but you can easily program it in the field when you're there. They are probably operating in the VHF 70cm band 440mhz. In VFO mode you can easily scan the band when you're there and it should find them when they are transmitting. Joe KD2NFC Sent from my iPhone > On Aug 7, 2017, at 8:31 PM, Carrie Jackson <mssjacksonifyournasty(a)gmail.com> wrote: > > So I have a theoretical question. If one was to attend a festival and wanted to be on security's frequency how would one achieve this using chirp and a Baofeng UV-5R. Theoretically. At Summerset. > > Miss Jackson > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 104, Issue 8 *******************************************

3 2

[chirp_users] How to program
by Carrie Jackson 07 Aug '17

07 Aug '17

So I have a theoretical question. If one was to attend a festival and wanted to be on security's frequency how would one achieve this using chirp and a Baofeng UV-5R. Theoretically. At Summerset. Miss Jackson

2 1

[chirp_users] How do I update an issue I reported at http://chirp.danplanet.com/projects/chirp/issues
by David A. Behar 07 Aug '17

07 Aug '17

Hi friends, Some time ago (May 7) I reported an issue (Bug #4799). I now have better information, and some of the info I reported earlier is not correct. I don't see how to update an issue I reported previously. How do I update an issue I reported earlier? David / K7DB

2 1

[chirp_users] never mind, I figured it out.
by Paul Veltman 07 Aug '17

07 Aug '17

Sorry for wasting bandwidth here. I was able to figure it out on my own. Paul WA6OKQ

5 4

Re: [chirp_users] Programming 2 distinct frequencies.
by Baji Panchumarti 06 Aug '17

06 Aug '17

http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns#Duplex On Sat, Aug 5, 2017 Paul Veltman wrote: I noticed that when programming a repeater pair, Chirp defaults to a + > or - 600 kcs which is the standard ham practice. I don't see where I > can deviate from that. What I want to do specifically is program in > 160.770 as the uplink and 160.230 as the downlink. > > Paul WA6OKQ > > > > > > __

1 0

[chirp_users] Baofeng 888 STE disable?
by â ¡â € ðŸ—‹ 06 Aug '17

06 Aug '17

Is there a way to disable the squelch tail elimination (~55hz tone) on de-key when CTCSS is used? It doesn't seem to be an option on the 888, but it is on other baofengs. In a noisy environment with no squelch end noise, it's hard to tell when the other person has de-keyed. I'm wondering if there's a way to import this setting from another radio profile to see what happens.

1 0

[chirp_users] Programming 2 distinct frequencies.
by Paul Veltman 05 Aug '17

05 Aug '17

I noticed that when programming a repeater pair, Chirp defaults to a + or - 600 kcs which is the standard ham practice. I don't see where I can deviate from that. What I want to do specifically is program in 160.770 as the uplink and 160.230 as the downlink. Paul WA6OKQ

3 2