- Users - lists.chirpmyradio.com

Re: [chirp_users] Unable to write csv file
by Thom LaCosta 22 Aug '17

22 Aug '17

problem solved....chirp does NOT write the file to the disk unless you say overwrite the file and then save the file when you exit... seems to me once it writes to memory you should be asked if you want to save it....or the message should say something like "file mytestsetup.cvs has not been saved Do you want to save it now?" thanks for all the hints...

4 5

Re: [chirp_users] Unable to write csv file
by Thom LaCosta 22 Aug '17

22 Aug '17

At 09:46 PM 8/21/2017, you wrote: >Thom, > >Install mlocate then run sudo updatedb then give the command as >regular userto: thanks, but I'm using windows

4 3

[chirp_users] Unable to write csv file
by Thom LaCosta 21 Aug '17

21 Aug '17

I'm using the latest daily build available on the website ... software recognizes my UV-5...and I can write to the radio. I've tried to export the radio setting to a csv file...both as a normal user and as administrator....chirp says the file exists, but it does not show up in windows. I've tried both the installer and zip versions of chirp-daily-20170714 I'm assuming I'm doing something wrong...but can't identify it. thanks thom k3hrn

3 4

[chirp_users] Increasing scan "hang time" BF-F8HP
by Michael Grossie 19 Aug '17

19 Aug '17

Is there a way to increase the amount of time the scan feature stays on a channel after traffic has stopped? Hard to grab the radio and see what channel (or frequency) the last traffic was on. This may have been asked and answered. Thanks Michael H Grossie mhgrossie(a)sbcglobal.net

8 8

[chirp_users] Talkcoop kt-8900d
by gary brewer 17 Aug '17

17 Aug '17

Hello k5geb. I have a talkcoop kt-8900 it is the same as the qyt kt-8900d i have tryed using chirp. And the software that comes with the radio i am unable to program it with chirp or there software all help to program this radio would be greatful .gary brewer k5geb Sent from Yahoo Mail on Android

3 2

[chirp_users] Baorfeng transmit block while on reverse frequency
by Eric H 15 Aug '17

15 Aug '17

I program a lot of Boafeng uv-5r radios and have found an issue. I have a few channels I'd like to talk on and others I do not. If the reverse frequency function is turned on when on a channel you can transmit on, it will allow you to transmit on any channel in the radio. Is there a way to stop this from happening? You cannot access the reverse frequency option unless on a channel you can transmit on. Sent from my iPhone

3 6

[chirp_users] How to program.
by J. David Aten 09 Aug '17

09 Aug '17

While some festivals might have their own radios and license, many more, now days, go to a third party that leases radios, and applies for a temporary license. An example is WQXT583. They have 13 frequencies, 850 units, and will be using DMR digital radios. This is very common, as to radio type, and size of the event. So, to find the security frequency, out of all of those, can be very hard to find, and would require extensive listening to figure what each frequency is being used for. The event won't tell you. Sent from my iPad

3 2

Re: [chirp_users] chirp_users Digest, Vol 104, Issue 8
by mike Heightchew 08 Aug '17

08 Aug '17

ok what is it with the bofang radio the UV5 i just put a icom TH7h and it picks the right com portbut not on the bofang radios On Tuesday, August 8, 2017 12:02 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. How to program (Carrie Jackson) 2. Re: How to program (Joe Puma) ---------------------------------------------------------------------- Message: 1 Date: Mon, 7 Aug 2017 19:31:11 -0500 From: Carrie Jackson <mssjacksonifyournasty(a)gmail.com> Subject: [chirp_users] How to program To: chirp_users(a)intrepid.danplanet.com Message-ID: <DFC18ADE-99AB-409F-992A-497B41A5437F(a)gmail.com> Content-Type: text/plain; charset=us-ascii So I have a theoretical question. If one was to attend a festival and wanted to be on security's frequency how would one achieve this using chirp and a Baofeng UV-5R. Theoretically. At Summerset. Miss Jackson ------------------------------ Message: 2 Date: Mon, 7 Aug 2017 20:48:09 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] How to program To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <7B4494F4-B12F-4705-BCC0-D0C52D2A3916(a)yahoo.com> Content-Type: text/plain; charset=us-ascii You would have to know what frequency they are using. CHIRP couldn't help you either way unless you know the frequency but you can easily program it in the field when you're there. They are probably operating in the VHF 70cm band 440mhz. In VFO mode you can easily scan the band when you're there and it should find them when they are transmitting. Joe KD2NFC Sent from my iPhone > On Aug 7, 2017, at 8:31 PM, Carrie Jackson <mssjacksonifyournasty(a)gmail.com> wrote: > > So I have a theoretical question. If one was to attend a festival and wanted to be on security's frequency how would one achieve this using chirp and a Baofeng UV-5R. Theoretically. At Summerset. > > Miss Jackson > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 104, Issue 8 *******************************************

3 2

[chirp_users] How to program
by Carrie Jackson 07 Aug '17

07 Aug '17

So I have a theoretical question. If one was to attend a festival and wanted to be on security's frequency how would one achieve this using chirp and a Baofeng UV-5R. Theoretically. At Summerset. Miss Jackson

2 1

[chirp_users] How do I update an issue I reported at http://chirp.danplanet.com/projects/chirp/issues
by David A. Behar 07 Aug '17

07 Aug '17

Hi friends, Some time ago (May 7) I reported an issue (Bug #4799). I now have better information, and some of the info I reported earlier is not correct. I don't see how to update an issue I reported previously. How do I update an issue I reported earlier? David / K7DB

2 1

[chirp_users] never mind, I figured it out.
by Paul Veltman 07 Aug '17

07 Aug '17

Sorry for wasting bandwidth here. I was able to figure it out on my own. Paul WA6OKQ

5 4

Re: [chirp_users] Programming 2 distinct frequencies.
by Baji Panchumarti 06 Aug '17

06 Aug '17

http://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns#Duplex On Sat, Aug 5, 2017 Paul Veltman wrote: I noticed that when programming a repeater pair, Chirp defaults to a + > or - 600 kcs which is the standard ham practice. I don't see where I > can deviate from that. What I want to do specifically is program in > 160.770 as the uplink and 160.230 as the downlink. > > Paul WA6OKQ > > > > > > __

1 0

[chirp_users] Baofeng 888 STE disable?
by â ¡â € ðŸ—‹ 06 Aug '17

06 Aug '17

Is there a way to disable the squelch tail elimination (~55hz tone) on de-key when CTCSS is used? It doesn't seem to be an option on the 888, but it is on other baofengs. In a noisy environment with no squelch end noise, it's hard to tell when the other person has de-keyed. I'm wondering if there's a way to import this setting from another radio profile to see what happens.

1 0

[chirp_users] Programming 2 distinct frequencies.
by Paul Veltman 05 Aug '17

05 Aug '17

I noticed that when programming a repeater pair, Chirp defaults to a + or - 600 kcs which is the standard ham practice. I don't see where I can deviate from that. What I want to do specifically is program in 160.770 as the uplink and 160.230 as the downlink. Paul WA6OKQ

3 2

[chirp_users] wouxun kv-uv8dplus
by Gggghh Bji 05 Aug '17

05 Aug '17

trying to program radio and when try to read it screen shows clonning and then it say radio did not respond. is the kv-uv8dpluss differet than the kv-uv8d. Can someone help have checked port setting and all seems to be working. Bobby KG5SRE

1 0

Re: [chirp_users] chirp_users Digest, Vol 104, Issue 3 ///BRIAN////
by George M. Collins 03 Aug '17

03 Aug '17

Brian George Here, I would be happy to look at it. Forgive me, it has been a few years. I don't know where you have every thing/ what it is written in. Can you link me to a windows development site? I have ubunto/aix and some others but I have to turn them on to see what they are. I am weak in C, pretty good in VB, others I have to feel my way through. What is the best way to start and I will dig in to it. George 714 957 3942 -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of chirp_users-request(a)intrepid.danplanet.com Sent: Thursday, August 03, 2017 12:00 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 104, Issue 3 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Kurt) 2. Re: Importing / updating Error Icom 7100 (Brian Dickman) ---------------------------------------------------------------------- Message: 1 Date: Thu, 3 Aug 2017 00:39:15 +0000 (UTC) From: Kurt <ksaves2(a)sbcglobal.net> Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK //////////??????????????? To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <1557152035.6061155.1501720755738(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Er, um. ?Did anyone say the software is free? ?I've had no problems with it.?Heck I was the first guy that used it a "few" years ago when one of the?developers sent me a version to reset the center frequency on 60 meterson an FT-817ND when the FCC changed it. ?Then the program was rapidlyreleased so others could do it too. Kurt KC9LDH On Jul 30, 2017, at 10:58 AM, Roger Woods wrote: Software is o.k. it's the user.? On 30 Jul 2017 7:49 p.m., "mike Heightchew" <mikeheight(a)att.net> wrote: YOUR SOFTWARE IS JUNK //////////???????????????YOUR ?SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINEI RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR SOFTWARE?I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE WORLD?TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND?TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK?I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND? | | Virus-free. www.avast.com | ______________________________ _________________

2 1

[chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????
by mike Heightchew 03 Aug '17

03 Aug '17

YOUR SOFTWARE IS JUNK //////////???????????????YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINEI RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR SOFTWARE I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE WORLD TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND | | Virus-free. www.avast.com |

27 29

Re: [chirp_users] (Don't feed this Troll anymore) WAS YOUR SOFTWARE IS JUNK
by Ronny Julian 03 Aug '17

03 Aug '17

If everyone would stop feeding this troll this would go away. The software works and well. If you don't like it your money back! 9Free!) On Thu, Aug 3, 2017 at 3:16 PM, Paul Veltman <stumpie1(a)sbcglobal.net> wrote: > I don't know what the problem is. I just programmed my HT with it and > it works fine. It's a nice little program,. Sure a lot better than > trying to read the lousy Beofeng manual. Now talk about Junk! > > 73 > > Paul WA6OKQ > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Ronny Julian at k4rjjradio(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com >

1 0

Re: [chirp_users] YOUR SOFTWARE IS JUNK
by Amnon Zohar 03 Aug '17

03 Aug '17

Read the very good manual for baofeng on miklor.com! בתאריך 4 באוג' 2017 1:14,‏ "George K5GOC" <george.k5goc(a)gmail.com> כתב: I don't know what this persons issue is but I am a new HAM (14 months) and have programmed four radios without any issues. On 8/3/2017 2:16 PM, Paul Veltman wrote: > I don't know what the problem is. I just programmed my HT with it and > it works fine. It's a nice little program,. Sure a lot better than > trying to read the lousy Beofeng manual. Now talk about Junk! > > 73 > > Paul WA6OKQ > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to George at george.k5goc(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

2 1

Re: [chirp_users] YOUR SOFTWARE IS JUNK
by Paul Veltman 03 Aug '17

03 Aug '17

I don't know what the problem is. I just programmed my HT with it and it works fine. It's a nice little program,. Sure a lot better than trying to read the lousy Beofeng manual. Now talk about Junk! 73 Paul WA6OKQ

3 2

[chirp_users] Your Grammer is junk!
by lr60 03 Aug '17

03 Aug '17

Where are you from? Sent from Trump's secret server in the basement of the Kremlin... Sent from my Verizon 4G LTE smartphone

1 0

[chirp_users] Importing / updating Error Icom 7100
by George M. Collins 03 Aug '17

03 Aug '17

Hi, My first few weeks of using CHIRP, What I am seeing is when I update from file it will change the offset on EXISTING saved frequencies/channels. For instance I have 146.345 with 1.035 as the dup offset minus. after an update from a backup file it will set everything to 5000/default, even saved channels. Am I doing something wrong? Do you need me to send samples? Old UNIX programmer, happy to help if I am not too outdated. George

2 1

[chirp_users] Productive info
by Daniel Smitley Sr 01 Aug '17

01 Aug '17

Wow, I joined mailing list as I figured this was a free program that we all work together to find solutions and make it more beneficial for all. However, I have seen nothing but folks complaining. Never ceases to amaze me how folks think they have the right to complain about things that are free. Instead of complaining, why not help work to a solution.

4 3

Re: [chirp_users] Productive info
by Edwin W Luke 01 Aug '17

01 Aug '17

I agree, Dan! Skip On August 1, 2017, at 1:27 PM, Daniel Smitley Sr <kg5ubq(a)gmail.com> wrote: Wow, I joined mailing list as I figured this was a free program that we all work together to find solutions and make it more beneficial for all. However, I have seen nothing but folks complaining. Never ceases to amaze me how folks think they have the right to complain about things that are free. Instead of complaining, why not help work to a solution. _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Skip KL7IXX at salty4568(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] FT-7900R features
by Russell Kinner 01 Aug '17

01 Aug '17

I’m using Chirp to program my Baofeng unit and wanted to do the same for my FT-7900R but have run into 2 items that I haven't found to control some minor items in the Yaesu unit. The basic frequency, tone and offset are just fine. 1. I’ve previously used RT Systems to program my FT-7900R and that software has a Hyper Memory that can configure the 5 buttons around the display (labeled 1-5). I can’t seem to find where to set that on Chirp. Is that available? 2. I cannot seem to set the display for each channel to frequency or Name. Again, that is available in RT Systems and I am guessing it is also available on Chirp but where? What I have works for the basics and I am glad for that but learning the software does take a little time. Possibly there is a tab I haven’t tried. *Rusty, WA8ZID*

3 2

Re: [chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????
by Amnon Zohar 01 Aug '17

01 Aug '17

The cheap cable are not a real problem as long as you use the older driver. Works fine for me בתאריך 31 ביול' 2017 8:10,‏ "Tom Hayward" <tom(a)tomh.us> כתב: On Sun, Jul 30, 2017 at 9:46 PM, Larry Lovell <larry.lovell76(a)gmail.com> wrote: > > I love Chirp and have used it on at least three different radios. My greatest problem is finding a cable that really works. Some of the USB to serial cables are defective clones and have cost me a bundle trying to either find or build a good one. Never had an issue with Chirp. Thank you for the software. There are two ways to go with this: - Buy one good FTDI to DE9 cable and then buy only serial cables for each radio - Or switch to Linux where there are no driver issues Tom KD7LXL _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

7 7

Re: [chirp_users] chirp_users Digest, Vol 103, Issue 29
by Eric Chopin 31 Jul '17

31 Jul '17

Re: YOUR SOFTWARE IS JUNK Hey, ALL these individual that have the audacity to criticize need to take a step back and try to connect with their 1 brain cell... Maybe they can do better!!?? ... if not go and buy some dedicated programming software @ $100 a pop!! ...otherwise just zip it!! I have used CHIRP for many years, programmed MANY radios of different manufacture and always had my queries answered and questions solved by the team I think ALL the guy's that contribute to the development of this SUPERB piece of software are doing a sterling job and I wish I had half of the programming knowledge that these guy/girls have. Keep up the good work CHIRP teams ...just ignore the negative individuals. 73's Eric On Mon, Jul 31, 2017 at 12:00 PM, < chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (George Hale Jr.) > 2. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (Jimmy Ray Tyner III) > 3. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (Baji Panchumarti) > 4. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Edwin W Luke) > 5. Re: Fwd: Re: Icom IC-80AD (David Ranch) > 6. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (Steven Craven) > 7. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (mats.g.roos(a)gmail.com) > 8. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Ron Hawkins) > 9. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Jim Unroe) > 10. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (D.J.J. Ring, Jr.) > 11. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (D.J.J. Ring, Jr.) > 12. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (George Hale Jr.) > 13. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Rodger Woods) > 14. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Benton) > 15. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (D.J.J. Ring, Jr.) > 16. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (kc6iih(a)aol.com) > 17. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Benton) > 18. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (jim) > 19. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (Chance Fulton) > 20. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Joe Puma) > 21. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Alan Hill) > 22. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (Martin Howells) > 23. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Jardy) > 24. PowerWorx (David J. J. Ring, Jr.) > 25. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Larry Lovell) > 26. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Tom Hayward) > 27. Uniden 996P2 (Dave Archer) > 28. Re: Uniden 996P2 (Jardy) > 29. Re: Uniden 996P2 (Tom Hayward) > 30. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Amnon Zohar) > 31. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (John Kemker) > 32. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (Mark H. Harris) > 33. Re: YOUR SOFTWARE IS JUNK //////////??????????????? > (Erick Reinstedt) > 34. Re: YOUR SOFTWARE IS JUNK //////////??????????????? (Skip) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 30 Jul 2017 13:03:18 -0600 > From: "George Hale Jr." <ghalejr(a)gmail.com> > Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK > //////////??????????????? > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAJfKeYBHxbYrWDpnoAKCBFz-MbbU9XfmRMkLgDJBpBEDEqZ9ww@ > mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Every time I have used Chirp, any issues were from my learning curve. > That's on me, not anything from the program that could be done better. I > challenge you to find a better program, with better support at any cost. > > You will get further in life, if you learn to channel your emotions to > solving problems, and not blaming the rest of the world. > > Cheers. George > > On Sun, Jul 30, 2017 at 12:48 PM, Jon Raether <raether.jon(a)gmail.com> > wrote: > > > As a newbie, I can tell you all I am very thankful for your work! I just > > programmed my first radio last weekend in my first radio as I begin my > > journey to get my tivcket, I am now able to listen to others! I look > > forward to getting my "ticket" and being able to use the radio! > > > > I found the software easy to use and the directions simple. Worked the > > first time I used it! > > > > > > >From a newbie, thanks for all of your hard work! > > > > > > > > Jon > > > > > > -----Original Message----- > > From: chirp_users-bounces(a)intrepid.danplanet.com > > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Randy > > Elliott > > Sent: Sunday, July 30, 2017 1:24 PM > > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > > Subject: Re: [chirp_users] YOUR SOFTWARE IS JUNK > //////////??????????????? > > > > Wow, those are very harsh words towards a group of fine people that > > "VOLUNTEER" their time to bring us this FREE software. > > My suggestion to you, would be, stop using CHIRP and just go away. > > > > Randy > > VE3JPU(a)me.com > > > > > > > On Jul 30, 2017, at 2:07 PM, Tom Hayward <tom(a)tomh.us> wrote: > > > > > >> On Sun, Jul 30, 2017 at 10:47 AM, mike Heightchew <mikeheight(a)att.net > > > > wrote: > > >> > > >> YOUR SOFTWARE IS JUNK //////////??????????????? > > >> YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE > > >> I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR > > SOFTWARE > > >> I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE > > WORLD > > >> TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND > > >> TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK > > >> I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND > > > > > > I know your 4 key works because you used a few times in this message. > > > I'm going to guess you never tried using it in the com port field. If > > > you had, you wouldn't have trued for 5 days--or was it 4 days--you > > > weren't clear on that. > > > > > > Tom KD7LXL > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users(a)intrepid.danplanet.com > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Skid at ve3jpu(a)me.com > > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Jon Raether at raether.jon(a)gmail.com > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to ghalejr(a)gmail.com at ghalejr(a)gmail.com > > To unsubscribe, send an email to chirp_users-unsubscribe@ > > intrepid.danplanet.com > > >

1 0

[chirp_users] PowerWorx
by David J. J. Ring, Jr. 31 Jul '17

31 Jul '17

Does anyone have a very good relationship with the management of POWERWERX.COM? I have tried to speak to them about CHIRP but they are under some prejudice that CHIRP bricks radios so that they are unrecoverable. If someone knows the owner, I'd like to lobby for acceptance of this fine software with the object that they could persuade some companies to share programming data with the developers of CHIRP. 73 DR N1EA

6 7

[chirp_users] Fwd: Re: Icom IC-80AD
by Wayne Roberts 31 Jul '17

31 Jul '17

-------- Forwarded Message -------- Subject: Re: [chirp_users] Icom IC-80AD Date: Wed, 26 Jul 2017 17:05:18 -0500 From: Wayne Roberts <mrgadgetfl(a)gmail.com> To: David J. J. Ring, Jr. <n1ea(a)arrl.net> CHIRP daily-20170714, Windows 10 (64). Wayne, K4GQS On 7/26/2017 4:59 PM, David J. J. Ring, Jr. wrote: > Under About Chirp what version is it and what operating system are you > using. > > The version to use is the DAILY BUILD. > > 73 > David > N1EA > > On July 26, 2017 3:26:38 PM EDT, Wayne Roberts <mrgadgetfl(a)gmail.com> > wrote: > > 73 > > DR > N1EA > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Wayne at mrgadgetfl(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 3

Re: [chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????
by Edwin W Luke 31 Jul '17

31 Jul '17

Works just fine for me! If you do not like chirp, write your own! Skip KL7IXX On July 30, 2017, at 10:49 AM, mike Heightchew <mikeheight(a)att.net> wrote: YOUR SOFTWARE IS JUNK //////////??????????????? YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR SOFTWARE I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE WORLD TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND Virus-free. www.avast.com

11 12

Re: [chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????
by D.J.J. Ring, Jr. 30 Jul '17

30 Jul '17

Hello Mike, Thanks for the off-list direct reply (copied below). Others including myself are trying to help you but we don't get responses from you to help fix the problem that you are having. A screen print of your Device Manager showing the COM ports that are being recognized would help. You can upload such a screen shot anonymously to http://imgur.com. Just post the link they will give you. As you have just been told, your COM port is not being seen. Can you see your comport under Device Manager? What you wrote to me doesn't even make sense. i am going to spent my time with software that will not works > CHIRP works fine. It supports the COM port that you have. You haven't answered any question that has been asked of you, but you complain. If you want to answer some questions we can find what the problem is that you are having. Thousands of people use this software every day. A few have problems, but usually it is just an operator error. If you would like to write to the list calmly, we could help you find the error you have. Often it is a cable that is defective. Some cables do not fit in the radios. Often - with Windows - the user has purchased a cable with a counterfeit electronic chip in it they are based on the Prolific PL-2303 USB chip. Windows detects the chip and updates the driver, and the driver now updated won't work with the fake chip in the USB to serial port converter. There are suitable converters - they are based on the FTDI chip. Here is a USB to Serial Port converter that is FTDI based. https://www.amazon.com/dp/B004ZMYTYC/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF… You've asked for help, people have responded to you, but you fail to respond to questions. Can you show us a screen shot of the Port being recognized by Device Manger? If it's recognized by Device Manager, it WILL be seen in CHIRP. Wishing you well, David N1EA On Sun, Jul 30, 2017 at 4:37 PM, mike Heightchew <mikeheight(a)att.net> wrote: > yes i check everything that is ok i am going to spent my time with > software that will not works > so have a nice day it would good idea for you make this software easter > to use > and i am tec i fix 3 or 4 a day been doing it for 25 year so i know what > i am doing here this software is not non computer people to use > > bye > > > On Sunday, July 30, 2017 1:30 PM, "D.J.J. Ring, Jr." <n1ea(a)arrl.net> > wrote: > > > Mike, > > I personally replied to your first message. > > There were also three additional replies. > > To your second message there were 17 replies. > > People have tried to help you, I personally am using COM 5 so what you are > saying is not true. > > I also asked you if you were using a USB to Serial converter, and you did > not answer me. > > It's obvious, but perhaps you need someone to tell you: What you are > saying is totally false. > > I'm saying that because people who start believing what is false, really > become confused and it's a frightening trip that sometimes is one from > which they never return to sanity. > > I hope you find your way. We're here to help about CHIRP but there are > other places you can seek aid for the other problems which seem obvious at > least to me. > > Best wishes, > > David N1EA > > > > > On Sun, Jul 30, 2017 at 1:47 PM, mike Heightchew <mikeheight(a)att.net> > wrote: > > YOUR SOFTWARE IS JUNK //////////??????????????? > YOUR SOFTWARE I CAN ONLY PICK COMM1 TO 3 I RUN OTHER SOFTWARE FINE > I RUN MY RADIOS ON COM 4 AND I CAN NOT PICK COM 4 ANYWHERE IN YOUR > SOFTWARE > I HAVE TRUED FOR 5 DAYS I AM PUT THIS PROBLEM ON THE NET FOT THE WHOLE > WORLD > TO SEE I HAVE MAIL 8 YOU 8 TIMES NOW WITH NO ANSWER AND > TAKEN YOU 4 DAYS OF TIME TO TRY TO YOUR JUNK SOFTWARE TO WORK > I HAVE 6 RADIO RUNNING ON MY COMPUTER AND THEY ALL WORK FIND > > > > > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. > www.avast.com > <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> > <https://mg.mail.yahoo.com/neo/launch?.partner=sbc&.rand=8eobleunonnc5#m_332…> > > ______________________________ _________________ > chirp_users mailing list > chirp_users@intrepid. danplanet.com <chirp_users(a)intrepid.danplanet.com> > http://intrepid.danplanet.com/ mailman/listinfo/chirp_users > <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to D.J.J. Ring, Jr. at n1ea(a)arrl.net > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com <chirp_users-unsubscribe(a)intrepid.danplanet.com> > > > > >

1 0

Re: [chirp_users] YOUR SOFTWARE IS JUNK //////////???????????????
by Baji Panchumarti 30 Jul '17

30 Jul '17

http://chirp.danplanet.com/projects/chirp/wiki/Download ~baji. . _ . _ . On Sun, Jul 30, 2017 at 3:05 PM, Jimmy Ray Tyner III <novothule(a)gmail.com> wrote: I need to redownload Chirp, what's the best site to do so from? > > __ >

1 0

[chirp_users] ok how do i fix this program i run my radio on com port 4 you software only goes to com 3
by mike Heightchew 30 Jul '17

30 Jul '17

and i can not run you software i have never seen this before how do fix this makes a lot of extra work to run your software i am not happy about this | | Virus-free. www.avast.com |

4 3

[chirp_users] totally confused
by Mark Blackwell 29 Jul '17

29 Jul '17

Brand new to linux, but just managed to get Linux to run with Ubuntu on a laptop and now trying to get Chirp. Right now the laptop has a problem with the networks. It can connect to a wifi, but nothing after that. Will likely just try to download on another computer and transfer Chirp over via a usb drive. When I read the instructions though, Ubuntu refers to something called a PPA which I do not see any information on what it is, what it needs, and not much about how its installed. It gives a couple of lines of code, but have no idea where it should be typed. To the real pros, this probably is so basic as to be assumed knowledge, but in my first 8 hours of linux its a bit overwhelming. I saw a live CD, but that looks like you must boot from the CD every time you need to use Chirp. Is that a practical and viable way to do it, even if linux is already installed? Any help is appreciated. -- Mark Blackwell markshamradio(a)pobox.com

4 4

[chirp_users] "radio did not respond"
by Paul Veltman 29 Jul '17

29 Jul '17

Hello all, I received a list error message that my post to the list was denied so I am posting it again. I apologize if it got posted twice. I just purchased a BaoFeng BF-F8HP and am trying to program it with Chirp. I followed the instructions and a pop up said "cloning" Then an error message popped up that said "radio did not respond." What am I doing wrong here? I am using the BaoFengTech FTDI cable on a windows 10 platform. TIA for any advice. Paul

4 3

[chirp_users] Icom IC-80AD
by Wayne Roberts 26 Jul '17

26 Jul '17

According to the web-based "Supported Devices" list, the Icom IC-80AD is supported; however, I am unable to find it in the device list in the latest build of Chirp. Any suggestions?

2 1

[chirp_users] Is the Yaesu FT-70D supported ?
by Dgyuro 25 Jul '17

25 Jul '17

Sent from my iPhone

2 1

Re: [chirp_users] Yaesu ft-2900
by N7TZK 24 Jul '17

24 Jul '17

What about the FT-2980R? Will CHIRP's FT-2900R support work with it? If I'm not mistaken, the only difference between the two is output power. Dave > Message: 4 > Date: Sun, 23 Jul 2017 07:15:14 -0400 > From: Jim Unroe <rock.unroe(a)gmail.com> > Subject: Re: [chirp_users] Yaesu ft-2900 > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CADnO8U7UCJMV1cAs-biar7saM-ADOD6j5C+h9RwLA8R_LaAz-A(a)mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" > > On Fri, Jul 21, 2017 at 4:03 PM, Eric Chopin <echopin27(a)gmail.com> wrote: >> Greetings, >> >> I have a Yaesu FT-2900 and was wondering if CHIRP is likely to include it in >> the already great list of radios?.....or if the is a variant already listed >> that will work with the 2900. >> >> 73's >> Eric > CHIRP supports the USA version of the FT-2900 (FT-2900R). It does not > currently support the FT-2900E (European version) or an FT-2900 that > has the MARS modification. > > Jim > > ...

1 0

Re: [chirp_users] Yaesu FT-8000
by Kenneth Strom VA3KRS 23 Jul '17

23 Jul '17

Which CHIRP Program will work on the Yaesu FT-8000? Both the FT-7800/8900 nor FT-8100 will not work although the latter is the same radio model with a detachable front control head. Kenneth Strom VA3KRS ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: July 23, 2017 3:00 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 103, Issue 21 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: chirp_users Digest, Vol 103, Issue 20 (Eric Chopin) 2. Re: chirp_users Digest, Vol 103, Issue 20 (Jardy Dawson) 3. Re: chirp_users Digest, Vol 103, Issue 20 (Jim Unroe) 4. Re: Yaesu ft-2900 (Jim Unroe) ---------------------------------------------------------------------- Message: 1 Date: Sat, 22 Jul 2017 21:39:21 -0700 From: Eric Chopin <echopin27(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 103, Issue 20 To: chirp_users(a)intrepid.danplanet.com Message-ID: <CAFe93E2pFt5FoOMCuC9voakqRuRkPGPb51-SFb9iKxry+2KtNg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" FT-2900 programming I had no success getting CHIRP to read the radio...looks like its not communicating with the rig. I am using Prolific 2303 with dedicated driver Windows XP and cable pin-out are correct. My unit is a FT-2900 but the CHIRP dropdown shows FT-2900R - FT-1900R could this be the issue? 73's Eric On Sat, Jul 22, 2017 at 12:00 PM, < chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Yaesu ft-2900 (Eric Chopin) > 2. Re: Yaesu ft-2900 (Chris Fosnight) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 21 Jul 2017 13:03:35 -0700 > From: Eric Chopin <echopin27(a)gmail.com> > Subject: [chirp_users] Yaesu ft-2900 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CAFe93E1cXQOdPbr9XDD=w3pe6RdH6yBGfTP4tzxi9tdzLDvoOA@mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > Greetings, > > I have a Yaesu FT-2900 and was wondering if CHIRP is likely to include it > in the already great list of radios?.....or if the is a variant already > listed that will work with the 2900. > > 73's > Eric >

4 3

[chirp_users] Yaesu ft-2900
by Eric Chopin 23 Jul '17

23 Jul '17

Greetings, I have a Yaesu FT-2900 and was wondering if CHIRP is likely to include it in the already great list of radios?.....or if the is a variant already listed that will work with the 2900. 73's Eric

3 2

Re: [chirp_users] chirp_users Digest, Vol 103, Issue 20
by Eric Chopin 23 Jul '17

23 Jul '17

FT-2900 programming I had no success getting CHIRP to read the radio...looks like its not communicating with the rig. I am using Prolific 2303 with dedicated driver Windows XP and cable pin-out are correct. My unit is a FT-2900 but the CHIRP dropdown shows FT-2900R - FT-1900R could this be the issue? 73's Eric On Sat, Jul 22, 2017 at 12:00 PM, < chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Yaesu ft-2900 (Eric Chopin) > 2. Re: Yaesu ft-2900 (Chris Fosnight) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 21 Jul 2017 13:03:35 -0700 > From: Eric Chopin <echopin27(a)gmail.com> > Subject: [chirp_users] Yaesu ft-2900 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CAFe93E1cXQOdPbr9XDD=w3pe6RdH6yBGfTP4tzxi9tdzLDvoOA@mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > Greetings, > > I have a Yaesu FT-2900 and was wondering if CHIRP is likely to include it > in the already great list of radios?.....or if the is a variant already > listed that will work with the 2900. > > 73's > Eric >

3 2

[chirp_users] Icom IC-R8600?
by Martin Ewing 21 Jul '17

21 Jul '17

Hello Chirp world! I would like to know if the Icom R8600 is likely to be supported in the foreseeable future. It seems like a natural. Any info appreciated. TIA Martin AA6E

1 0

[chirp_users] Alinco DR235
by Deane Bouvier 19 Jul '17

19 Jul '17

I have used Chirp successfully with multiple DR235 radios in the past. Using the same good cable (OPC-478 + USB convertor) I get "Unexpected Response from the Radio" most of the time. On rare occasions it works. I downloaded the latest daily build with no difference. Can anyone explain what happened? Is there a work around? Did RT Systems plant a bug? Thanks, N5DQ

1 0

[chirp_users] Baofeng UV-5R question - programmable memory channels
by Rodney D. Myers 18 Jul '17

18 Jul '17

Short of downloading the archives and plugging into mail client, and online search of archives is non-existent, I'll ask here. Never programmed more than 76 channels before. I grabbed all of the repeaters that border the Interstate I normally travel, which adds up to 144, at the moment. When programming the Baofeng UV5R it says a max of 127 channels can be programmed. I tried upping the number in the fields at the top of CHIRP, but that does not help either. What am I missing here? Thank you. -- Rodney D. Myers <rdmyers.42(a)gmail.com> - kg6anx They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Ben Franklin - 1759

2 2

[chirp_users] Download/Beta?
by Kip Barton 17 Jul '17

17 Jul '17

http://chirp.danplanet.com/download/beta/ Link listed in users welcome email is not available!

2 1

[chirp_users] BF-F8HP Help Thank you.
by David Booth 16 Jul '17

16 Jul '17

Thanks to all of you that sent help and advice on programming my radio. I really appreciate it. David Booth

1 0

Re: [chirp_users] chirp_users Digest, Vol 103, Issue 14
by laveei Israel Lavee 16 Jul '17

16 Jul '17

Sent from my Galaxy 8 S + כלכםץץץ ל תל ףץץךף7ת 8קנ ץץ ץ 8מ ץ ץ ץץ בתאריך 15 ביולי 2017 22:00,‏ <chirp_users-request(a)intrepid.danplanet.com> כתב: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 103, Issue 13 (Christopher F. Beesley) > 2. BF-F8HP (David Booth) > 3. Re: BF-F8HP (Glenn At Home) > 4. Re: BF-F8HP (Jim Unroe) > 5. Re: BF-F8HP (John LaMartina) > 6. power level column (Glenn At Home) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 15 Jul 2017 02:20:42 +0000 > From: "Christopher F. Beesley" <chrisbees2(a)hotmail.com> > Subject: Re: [chirp_users] chirp_users Digest, Vol 103, Issue 13 > To: "chirp_users(a)intrepid.danplanet.com" > <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <DB6P194MB0200FED575B1BDE07D5357BE8FA20@DB6P194MB0200. > EURP194.PROD.OUTLOOK.COM> > > Content-Type: text/plain; charset="iso-8859-1" > > Hello chirp_users, > > I am registered but my registration details are not accepted by chirp and > when I try to change them it says that I am already registered! So I cannot > go throught the usual procedures to make a request. > > I would like the Puxing PX888 to be added to the list of radios that chirp > can handle. I can't understand why it isn't already supported, there must > be thousands of them out there, but hey, there you go. > > Regards, Chris > > > ________________________________ > From: chirp_users-bounces(a)intrepid.danplanet.com < > chirp_users-bounces(a)intrepid.danplanet.com> on behalf of > chirp_users-request(a)intrepid.danplanet.com <chirp_users-request@intrepid. > danplanet.com> > Sent: 14 July 2017 19:00 > To: chirp_users(a)intrepid.danplanet.com > Subject: chirp_users Digest, Vol 103, Issue 13 > > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > chirp_users -- Discussion of CHIRP - intrepid.danplanet.com<http:// > intrepid.danplanet.com/mailman/listinfo/chirp_users> > intrepid.danplanet.com > This list is for discussion of CHIRP use, issues, and beta releases. At > any point, the latest daily build will be available here: > http://trac.chirp.danplanet.com ... > > > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. New Daily Build (Build System) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 14 Jul 2017 00:14:33 -0700 (PDT) > From: Build System <donotreply(a)danplanet.com> > Subject: [chirp_users] New Daily Build > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <1629197636.11.1500016473164.JavaMail.jenkins(a)eagle.danplanet.com> > Content-Type: text/plain; charset="utf-8" > > Greetings, > > A new daily build of CHIRP is available. This includes changes made > directly to the tree yesterday, and may include additional features, > bug fixes, and/or bugs. If you are interested in trying it, grab it > from the following location: > > http://trac.chirp.danplanet.com/chirp_daily/daily-20170714 > > > A list of the changes included in this build (since the last daily) > follows: > > Changes for Build #498 > [Jim Unroe <rock.unroe(a)gmail.com>] [KT8900] Extra ID Doesn't Match > > When a QYT KT8900 radio has had a passcode stored in it by the factory > software, the 'extra ID' will not match the string that CHIRP expects to > see. > > This patch relaxes the check by removing what are apparently the passcode > bytes from the string that CHIRP expects to see in the 'extra ID'. > > Bug #4993 > > > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > chirp_users -- Discussion of CHIRP - intrepid.danplanet.com<http:// > intrepid.danplanet.com/mailman/listinfo/chirp_users> > intrepid.danplanet.com > This list is for discussion of CHIRP use, issues, and beta releases. At > any point, the latest daily build will be available here: > http://trac.chirp.danplanet.com ... > > > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > End of chirp_users Digest, Vol 103, Issue 13 > ******************************************** >

1 0

[chirp_users] power level column
by Glenn At Home 15 Jul '17

15 Jul '17

Hi, I am importing a new CSV file into my Baofeng BF-F9 V2 using the CSV file I made for my son's BF 8. I am using Linux (Ubuntu Mate) and the Orca screenreader. It reads all the cells, but I don't know which column is the one that sets the power level. I want all my channels to default to high. Thanks for any assistance. Glenn Lenny/Glenn/N0YJV "Happiness depends more on the inward disposition of mind than on outward circumstances." Benjamin Franklin

3 3

[chirp_users] BF-F8HP
by David Booth 15 Jul '17

15 Jul '17

Hi, I am trying to program my BF-F8HP. In using CHIRP I get to Download from the radio. When I try to do this I can't find any commport number that works. Please help! Thanks, David

4 3

Re: [chirp_users] chirp_users Digest, Vol 103, Issue 13
by Christopher F. Beesley 14 Jul '17

14 Jul '17

Hello chirp_users, I am registered but my registration details are not accepted by chirp and when I try to change them it says that I am already registered! So I cannot go throught the usual procedures to make a request. I would like the Puxing PX888 to be added to the list of radios that chirp can handle. I can't understand why it isn't already supported, there must be thousands of them out there, but hey, there you go. Regards, Chris ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: 14 July 2017 19:00 To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 103, Issue 13 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users chirp_users -- Discussion of CHIRP - intrepid.danplanet.com<http://intrepid.danplanet.com/mailman/listinfo/chirp_users> intrepid.danplanet.com This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest daily build will be available here: http://trac.chirp.danplanet.com ... or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. New Daily Build (Build System) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 Jul 2017 00:14:33 -0700 (PDT) From: Build System <donotreply(a)danplanet.com> Subject: [chirp_users] New Daily Build To: chirp_users(a)intrepid.danplanet.com Message-ID: <1629197636.11.1500016473164.JavaMail.jenkins(a)eagle.danplanet.com> Content-Type: text/plain; charset="utf-8" Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170714 A list of the changes included in this build (since the last daily) follows: Changes for Build #498 [Jim Unroe <rock.unroe(a)gmail.com>] [KT8900] Extra ID Doesn't Match When a QYT KT8900 radio has had a passcode stored in it by the factory software, the 'extra ID' will not match the string that CHIRP expects to see. This patch relaxes the check by removing what are apparently the passcode bytes from the string that CHIRP expects to see in the 'extra ID'. Bug #4993 ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users chirp_users -- Discussion of CHIRP - intrepid.danplanet.com<http://intrepid.danplanet.com/mailman/listinfo/chirp_users> intrepid.danplanet.com This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest daily build will be available here: http://trac.chirp.danplanet.com ... To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 103, Issue 13 ********************************************

1 0