- Users - lists.chirpmyradio.com

[chirp_users] CHIRP Flatpak Accessibility
by D.J.J. Ring, Jr. 02 Jun '22

02 Jun '22

Glenn, I don't know if TEAMVIEWER is accessible, but if it is, I volunteer to help you put frequencies on your radio. I think probably that everything is working on your flatpak installation on the latest CHIRP but flatpak isn't accessible. This is a flatpak problem, not a CHIRP problem. 73 David N1EA On Thu, Jun 2, 2022, 12:49 AM K0LNY_Glenn <glenn(a)ervin.email> wrote: Hi Cinead, I did that, and after running that command, it came back with an error like no tail. When I tried to run Chirp, it read something like gtk error A few lines about gtk, but I could not copy it. My screenreader could not review it. For DJ's suggestion: Does CHIRP run if you issue this command as regular user in a terminal: flatpak run com.danplanet.chirp Seemed like it did, but it only read Chirp As Superuser and it seemed like the window for chirp was there, or an error window for chirp, but it did not function. Glenn

1 0

[chirp_users] New Daily Build
by Build System 02 Jun '22

02 Jun '22

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20220602 A list of the changes included in this build (since the last daily) follows: Changes for Build #688 [Dan Smith <dsmith(a)danplanet.com>] Revert "[PATCH] [BF-T1] Rework driver to use shared common code (#21)" This reverts commit 75c32ca4f222da072ae4481c7d19446931c47ed4. As noted here: https://chirp.danplanet.com/issues/9896 Users have reported widespread breakage with this patch. So, I'm going to revert it to get us back to a good state and we can re- introduce it later if the issues get worked out.

1 0

[chirp_users] 2 Questions from an Old Timer
by n6mg＠verizon.net 01 Jun '22

01 Jun '22

This past September 18th was my 76th birthday, and my 50th anniversary as a licensed ham. All I'm asking is that you be gentle with your replies, please? "RTFB" just doesn't get it.With that said, I have an older Baofeng UV-3R HT. It's the very small HT. #1) What software does it use?#2) What cable? A "standard" generic speaker/mic to USB cable, or...?I'd like to thank you Gentlemen/Ladies in advance for your courtesy.Experienced replies please.Milt.N6MG

6 5

[chirp_users] New Daily Build
by Build System 31 May '22

31 May '22

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20220531 A list of the changes included in this build (since the last daily) follows: Changes for Build #687 [Dan Smith <dsmith(a)danplanet.com>] Merge branch 'master' of github.com:kk7ds/chirp [Jim Unroe <rock.unroe(a)gmail.com>] New Model: Anysecu WP-9900 This patch adds support for the Anysecu WP-9900 mobile radio. Resolves #9827 [Jim Unroe <rock.unroe(a)gmail.com>] New Model: QYT KT-WP12 This patch adds support for the QYT-KT12 mobile radio. #9827 [Jim Unroe <rock.unroe(a)gmail.com>] Driver Maintenance (V2): btech.py related to #9845 Recently I have been focused on improving the speed and reliably of the btech.py driver module. Bug # 9818 was a first round attempt to bring about some improvements. This round, V2 if you will, has basically scrapped much of the original download/upload routines and has rebuilt them to more closely match how the OEM programming software works. The initialization of the cloning process is so reliable now that the code that tried 3 times before giving up was also removed. Before I submited these changes to be included into CHIRP, I wanted to reach out to a larger group of testers to validate this new code. Requests for external participation were made to some Facebook groups and the [chirp_users] mailing list. Unfortunately, there was vitrually no response from these requests for participation (and one post was removed as a violation of the group's rules). Despite the lack of external volunteers, I have been doing a broad range of testing to ensure that the changes provided in this patch will successfylly work with the broad range for radios that are supported by this driver module. The local testing was done on 5 different computers utilizing a variety of operating systems: - Windows 7 32-bit desktip - Windows 10 64-bit laptop - Linux Mint 20.3 desktop - Raspberry Pi OS (64-bit) Bullseye Raspberry Pi 3 Model B - macOS Catalina laptop There were 12 different radios used for these tests. - Anyseco WP-9900 - BTech UV-2501, UV-2501+220, UV-5001, UV-25X2, UV-25X4, UV-50X2, GMRS-X1, and 1 additional pre-release model. - Luiton LT-588UV - QYT KT-8R (handheld) - WACCOM MINI-8900 Plus And finally there were programming cables available from the 4 most common USB-to-UART chip vendors (PC03 style for the handheld radio and PC04 style for the mobile radios). - Future Technology Devices International (FTDI) - Prolific - Silicon Labs - WinChipHead (WCH) Each operating system/radio/programming cable combination was tried a minimun of 2 times (1 download/1 upload) for a minimum total of 480 tests. All were 100% successful. I am very pleased with the results. This patch adds support for this "V2" method of cloning to the btech.py driver module. [rim <11380091+rozhuk-im(a)users.noreply.github.com>] [PATCH] [BF-T1] Rework driver to use shared common code (#21)

2 1

[chirp_users] Fix Numbers In A CSV File
by K0LNY_Glenn 29 May '22

29 May '22

Hi, I have a CSV file for a radio that had a channel zero, and I want to start it with a one, but I don't want to rewrite a couple hundred cells. Does libra Calc have the ability to allow me to select the column and fix the numbers? So now I have two #1s and I'd like to add a 1 to subsequent numbers. Thanks. Glenn

2 1

[chirp_users] r-tone freq
by K0LNY_Glenn 29 May '22

29 May '22

Hi, I had obtained my original CSV file that I import into different radios, with editions, according to the radio. I was wondering about the r-tone freq column. All of mine are 88.5, and I'm guessing that r-tone is receive tone, which if it is that, I think that I will only hear other radios with the same r-tone frequency. Is this what the r-tone freq is? If so, I will remove all of them. Thanks. Glenn

3 2

[chirp_users] Tytera 9800 Programming
by K0LNY_Glenn 29 May '22

29 May '22

Hi, A vender of this radio tels how to expand the range of the four bands on this radio, some of the info I pasted below, but the software I downloaded from the Tytera site does not recognize the com port settings, it says the baud rate is wrong, but it only offers 115200 and 57 hundred and something. It read the com port first as com 3 and when that didn't work, I then I changed it to 13 in device manager and restarted the program, and it found it again on 13, but it still did not offer the right baud rate as an option, I changed it in device manager two times, trying its options for baud rate, but it still does not work. I tried putting it to 9600 in device manager, but it kept its own selection in the Tyt software. So, I'd like to use Chirp, but I read on line that I can't expand the frequency capabilities with Chirp. Does anyone know if this is the case? Here's what I got from a vendor's site: Glenn How the unlock the frequency ranges? 1. Connect your TH-9800 with the programming software and load (''read'') it to the software 2. Press ''CtrL+F11'' and enter the password ''9800TYT''; 3. Edit the frequency range: Maximum Frequency Range: - 26-33MHz (RX/TX) (AM band RX) - 47-54MHz (RX/TX) (AM band RX) - 136-174MHz (RX/TX) - 400-480MHz (RX/TX) 4. Write to the radio, turn off the radio and then turn it back on. Now, it can work in the expected frequency range.

1 0

[chirp_users] flatpak and modern linux
by Cinaed Simson 27 May '22

27 May '22

Hi - has anyone with a modern Linux OS succeeded in installing a working copy of chirp using flatpak? By a modern Linux I mean one with version of python3 greater then 3.6 - in general In a terminal window, type python3 and it will print out the version of python3 when it starts up. For instance, the version of python3 on my machine is Python 3.10.4 -- Cinaed

5 5

[chirp_users] Cannot install on Ubuntu 21.10
by Anne Ranch 27 May '22

27 May '22

Running Ubuntu 21.10 , have "flatpack" installed - after download tried "using Ubuntu software " and got something to the effect of "invalid option". Do not want to "upgrade to "22.xx"

5 4

Re: [chirp_users] chirp_users Digest, Vol 161, Issue 12
by John KI4RO 27 May '22

27 May '22

What does "use the flatpak ...." mean? On Thu, May 26, 2022 at 3:03 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 161, Issue 11 (John KI4RO) > 2. Re: Using chirp with ubuntu 22.04 (Guy Schlosser) > 3. Re: Using chirp with ubuntu 22.04 (K0LNY_Glenn) > 4. Re: Using chirp with ubuntu 22.04 (Jim Unroe) > 5. Yaesu 857D upload (Rod Bater) > 6. Re: Yaesu 857D upload (D.J.J. Ring, Jr.) > 7. Re: Yaesu 857D upload (Rod Bater) > 8. Re: chirp_users Digest, Vol 161, Issue 11 > (Nigel A. Gunn G8IFF/W8IFF) > 9. Fwd: Using chirp with ubuntu 22.04 (guy schlosser) > 10. Re: Using chirp with ubuntu 22.04 (guy schlosser) > 11. Re: Fwd: Using chirp with ubuntu 22.04 (K0LNY_Glenn) > 12. Re: Fwd: Using chirp with ubuntu 22.04 (Jim Unroe) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 25 May 2022 16:05:50 -0400 > From: John KI4RO <johnki4ro(a)gmail.com> > Subject: Re: [chirp_users] chirp_users Digest, Vol 161, Issue 11 > To: CHIRP USERS <chirp_users(a)intrepid.danplanet.com> > Message-ID: > < > CA+-NL43Rhdpp+v5zrsf1fsVW3fgqNBFdCa1Q6nBa+V6PjR3cuA(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > How does one make flatpak work? > > 73 > John KI4RO. > > > On Wed, May 25, 2022 at 3:02 PM < > chirp_users-request(a)intrepid.danplanet.com> > wrote: > > > Send chirp_users mailing list submissions to > > chirp_users(a)intrepid.danplanet.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > or, via email, send a message with subject or body 'help' to > > chirp_users-request(a)intrepid.danplanet.com > > > > You can reach the person managing the list at > > chirp_users-owner(a)intrepid.danplanet.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of chirp_users digest..." > > > > > > Today's Topics: > > > > 1. Using chirp with ubuntu 22.04 (Guy Schlosser) > > 2. Re: Using chirp with ubuntu 22.04 (Nigel A. Gunn G8IFF/W8IFF) > > 3. Re: Using chirp with ubuntu 22.04 (Joe Pizzi) > > 4. Re: Using chirp with ubuntu 22.04 (Guy Schlosser) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Wed, 25 May 2022 02:16:55 -0400 > > From: Guy Schlosser <guyster(a)bex.net> > > Subject: [chirp_users] Using chirp with ubuntu 22.04 > > To: chirp_users(a)intrepid.danplanet.com > > Message-ID: <BEB8100F-04FC-4D78-B6AD-3F54C31AD5ED(a)bex.net> > > Content-Type: text/plain; charset=utf-8 > > > > Hey everyone, I am new to this list, so first off hello. I am trying to > > get chirp running on my system. I am running Ubuntu 22.04, with all > > packages current. Chirp is installed via apt, as using snap or flat pack > > renders it inaccessible with Orca. > > > > The problem, when I download from my Baofeng Uv5r, I get an error that > > says module ?collections? has no attribute callable. Is anyone running > > Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer > > supported. Any help would be greatly appreciated. > > > > Thanks much in advance, > > > > Guy JAWS Certified, 2021, > > https://www.freedomscientific.com/Training/Certification > > > > > > ------------------------------ > > > > Message: 2 > > Date: Wed, 25 May 2022 08:38:29 -0400 (EDT) > > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > > Subject: Re: [chirp_users] Using chirp with ubuntu 22.04 > > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Guy > > Schlosser <guyster(a)bex.net> > > Message-ID: <1958236285.696582.1653482309207(a)email.ionos.com> > > Content-Type: text/plain; charset=UTF-8 > > > > Don't install Chirp from the repositories. It's too old. > > > > Go to https://trac.chirp.danplanet.com/chirp_daily/LATEST/ and download > > and install the flatpak version. > > You might have to first "sudo apt install flatpak" if you don't already > > have it. > > > > > > > > > On 25/05/2022 02:16 Guy Schlosser <guyster(a)bex.net> wrote: > > > > > > > > > Hey everyone, I am new to this list, so first off hello. I am trying to > > get chirp running on my system. I am running Ubuntu 22.04, with all > > packages current. Chirp is installed via apt, as using snap or flat pack > > renders it inaccessible with Orca. > > > > > > The problem, when I download from my Baofeng Uv5r, I get an error that > > says module ?collections? has no attribute callable. Is anyone running > > Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer > > supported. Any help would be greatly appreciated. > > > > > > Thanks much in advance, > > > > > > Guy JAWS Certified, 2021, > > https://www.freedomscientific.com/Training/Certification > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users(a)intrepid.danplanet.com > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > To report this email as off-topic, please email > > chirp_users-owner(a)intrepid.danplanet.com > > > > Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1-937-971-0366 > > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www > > http://www.ngunn.net > > > > > > ------------------------------ > > > > Message: 3 > > Date: Wed, 25 May 2022 07:40:15 -0500 > > From: "Joe Pizzi" <pizzi.joe(a)gmail.com> > > Subject: Re: [chirp_users] Using chirp with ubuntu 22.04 > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > Message-ID: <00a801d87034$95eb8480$c1c28d80$(a)gmail.com> > > Content-Type: text/plain; charset="utf-8" > > > > Use the flatpak: > > > https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fl… > > > > Joe Pizzi > > KI5LST > > > > -----Original Message----- > > From: chirp_users-bounces(a)intrepid.danplanet.com < > > chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Guy Schlosser > > Sent: Wednesday, May 25, 2022 1:17 AM > > To: chirp_users(a)intrepid.danplanet.com > > Subject: [chirp_users] Using chirp with ubuntu 22.04 > > > > Hey everyone, I am new to this list, so first off hello. I am trying to > > get chirp running on my system. I am running Ubuntu 22.04, with all > > packages current. Chirp is installed via apt, as using snap or flat pack > > renders it inaccessible with Orca. > > > > The problem, when I download from my Baofeng Uv5r, I get an error that > > says module ?collections? has no attribute callable. Is anyone running > > Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer > > supported. Any help would be greatly appreciated. > > > > Thanks much in advance, > > > > Guy JAWS Certified, 2021, > > https://www.freedomscientific.com/Training/Certification > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Joe Pizzi at pizzi.joe(a)gmail.com > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > To report this email as off-topic, please email > > chirp_users-owner(a)intrepid.danplanet.com > > > > > > > > ------------------------------ > > > > Message: 4 > > Date: Wed, 25 May 2022 09:26:40 -0400 > > From: Guy Schlosser <guyster(a)bex.net> > > Subject: Re: [chirp_users] Using chirp with ubuntu 22.04 > > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > > Message-ID: <38F842CD-86A9-482A-BC74-DE0319F42FE2(a)bex.net> > > Content-Type: text/plain; charset=utf-8 > > > > Joe, have you gotten chirp to work with orca using the flatpack? > > > > I tried to install it that way, and no part of the window was accessible. > > It does read, if I install it using apt. I am totally blind, so I > > definitely need it to work with the orca screen reader. JAWS Certified, > > 2021, https://www.freedomscientific.com/Training/Certification > > > > > On May 25, 2022, at 8:46 AM, Joe Pizzi <pizzi.joe(a)gmail.com> wrote: > > > > > > ?Use the flatpak: > > > https://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20220515.fl… > > > > > > Joe Pizzi > > > KI5LST > > > > > > -----Original Message----- > > > From: chirp_users-bounces(a)intrepid.danplanet.com < > > chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Guy Schlosser > > > Sent: Wednesday, May 25, 2022 1:17 AM > > > To: chirp_users(a)intrepid.danplanet.com > > > Subject: [chirp_users] Using chirp with ubuntu 22.04 > > > > > > Hey everyone, I am new to this list, so first off hello. I am trying to > > get chirp running on my system. I am running Ubuntu 22.04, with all > > packages current. Chirp is installed via apt, as using snap or flat pack > > renders it inaccessible with Orca. > > > > > > The problem, when I download from my Baofeng Uv5r, I get an error that > > says module ?collections? has no attribute callable. Is anyone running > > Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer > > supported. Any help would be greatly appreciated. > > > > > > Thanks much in advance, > > > > > > Guy JAWS Certified, 2021, > > https://www.freedomscientific.com/Training/Certification > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users(a)intrepid.danplanet.com > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Joe Pizzi at pizzi.joe(a)gmail.com > > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > To report this email as off-topic, please email > > chirp_users-owner(a)intrepid.danplanet.com > > > > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users(a)intrepid.danplanet.com > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Guy Schlosser at guyster(a)bex.net > > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > To report this email as off-topic, please email > > chirp_users-owner(a)intrepid.danplanet.com > > > > > > > > ------------------------------ > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > End of chirp_users Digest, Vol 161, Issue 11 > > ******************************************** > > >

1 0