- Users - lists.chirpmyradio.com

[chirp_users] Chirp program for Yaesu FT1500
by g6ohm＠talktalk.net 30 Apr '15

30 Apr '15

Hello everyone Can anyone tell me if the Chirp program was adjusted to work with the Yaesu FT1500. I did a search on the net and saw something about it had been suspended , but not sure how long ago it was. Any help appreciated 73 Andy Dunham G6OHM My email : g6ohm(a)talktalk.net My Website: http://g6ohm.webs.com/

3 2

[chirp_users] Regarding the message "UV-B5 upload with "Radio NAK'd block at address 0x0000" (Cody P Schafer)"
by george geran 25 Apr '15

25 Apr '15

I also had that problem with the Baofeng UV-5RE plus.I read some of the past listing and found the driver site, downloaded and installed the newer driver (my old driver was several years old and Windows 7 has had some major updates since then).Then I also noticed that a correction had been made on a daily update concerning block NK for 0.001 or 0.100 so I used that daily version. Everything worked fine. It did take me several hours researching the comments to find the suggestions but that is life with computers sometimes. Updates to operating systems can cause significant problems. Anyway, the result is that everything works fine now. George P. Geran

1 0

[chirp_users] Naming of Narrow vs Wide FM differs between radios making copying channels difficult
by Cody P Schafer 25 Apr '15

25 Apr '15

It appears that some models (UV-B5, UV-82, TERMN-8R) refer to Narrow FM as "NFM" and Wide FM as "FM", while others (Yaesu VX-8) appear to refer to Narrow FM as "FM" and Wide as "WFM". When one attempts to copy channels between radio drivers that use different names chirp is unhappy and gives an error for every channel with a non-compatible mode. Should these names be made uniform across drivers? Or am I just misinterpreting the "Mode" meaning (entirely possible). Thanks

1 1

[chirp_users] UV-B5 upload with "Radio NAK'd block at address 0x0000"
by Cody P Schafer 25 Apr '15

25 Apr '15

I've seen some other postings about higher addresses failing, but none about block 0 failing. This is a "27 menu" model of the uv-b5. Downloading works fine. Unmodified image here: http://vcr.einic.org/~nyx/uv-b5_orig.img I've tried uploading both modified and completely unmodified images to the radio. All fail with the same "Radio NAK'd block at address 0x0000" error.

3 7

[chirp_users] New Baofeng UV-5R w/cable. Chirp reports failed connection w/radio as could not communicate w/radio.
by DJ 24 Apr '15

24 Apr '15

I received this new radio today. I tried to use my old (August last year NewOld version) and had the same 'could not connect with radio'. It did nothing, but the new Daily download version not only does the same, but it also keys up the transmitter when attempting to clone, and still fails.

3 4

[chirp_users] Error message
by Shon Edwards 22 Apr '15

22 Apr '15

Am getting this error message "Upload finished, but the 'Other Settings' could not be sent because the firmware version of the image ( Ver B82S26 ) does not match that of the radio ( Ver B82S28 )." Am trying to upload info to a Baofeng UV-82X and getting this message. It's possible my CHIRP version may not be new enough. Seems to still transfer the frequencies and labels. Not sure what is NOT being transferred because of this. Does anyone know what needs to be done to get rid of the error message? Or what is not getting transferred? Anything to worry about? Thx, Shon Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA E-mail: sre.1966(a)gmail.com Home phone: (801) 444-3445 Cell: (605) 209-6064

2 3

[chirp_users] KG-UV899
by ngauge75＠verizon.net 22 Apr '15

22 Apr '15

Hi All! Spent Monday night programming about 20 various radios for a team. No trouble until I hit a Woxun UV899. I don’t see it listed but vaguely remember a discussion about it. Is it a variation of another radio? John kc2txv

1 0

[chirp_users] anytone at-5555n
by bryan puckett 21 Apr '15

21 Apr '15

Any programs for this rig to get the anl to be adjusted? Sent from Yahoo Mail on Android

2 1

[chirp_users] UV-82 "Privacy coding (tones)"
by Justin 21 Apr '15

21 Apr '15

So I tried to setup a UHF simplex channel with CTCSS/DCS on one of my UV-82’s (well frankly any “privacy” type code/tone). No matter what combination I tried, my BF8-HP (listening to the same frequency but no codes programmed) picked up every transmission. Also, the UV-82 would receive anything I sent with the BF8. The most I could accomplish was the the UV-82 would receive only the carrier and wouldn’t produce any of the audio. Downloading the daily build changed nothing and I even copied the settings from a working repeater channel and just removed the offset and still nothing. Is there a bug? Am I an idiot? I was able to program all my repeaters just fine and the tones are obviously working or the repeaters wouldn’t! Does the software ignore tone settings if there is no repeater offsets? Im doubtful as the LCD displayed the changes? Surely someone besides me wants some simplex “privacy”?

8 8

[chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
by Rolle Stavlind POP3 20 Apr '15

20 Apr '15

Hi! Got problems when try to program one off my Baofeng UV-5R. See the screens dumps below. Using the daily file from 20150416. Using Baofeng software the radio works. The other UV-5R works fine both with Chirp and Baofeng software When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio. /Rolle Rolle Stavlind Ledinge Kvarnbol 444 741 90 Knivsta Tel 018-345597 Mobil 070-5219597 Mail <mailto:rolle@stavlind.se> rolle(a)stavlind.se

7 7