October 2019 - Users - lists.chirpmyradio.com

Re: [chirp_users] chirp_users Digest, Vol 130, Issue 10
by Dave B 15 Oct '19

15 Oct '19

That'll be the Chinese surveillance mode feature. ;-) 73. Dave G0WBX. On 14/10/2019 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > Subject: [chirp_users] <OFF TOPIC> > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAE1d063upSPdb3-eYekweaaZ1ADVZDyT6Jp2TowPN1wLaQwK0g(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Found a really weird bug on my UV5R today by accident. > > If you have one, try it and see if yours does the same thing. > > Press and hold PTT. While holding PTT push 1 on the keypad and hold for 5 > seconds. This of course sends DTMF #1. > > If you release the PTT while still holding the 1 button, the radio stays in > transmit mode with the microphone on even though the display says it's back > in receive mode. I found no way to stop the transmission except to turn off > the radio. > > Dennis M. Wage (W9BOQ) -- Created on and sent from a Unix like PC running and using free and open source software:

4 3

Re: [chirp_users] setting up the (B) display in a uv-5ra
by Steve 14 Oct '19

14 Oct '19

Hi chirp_users. I have a Baofeng UV-5RA HT. I am trying to reset up the HT the way it was after #40 (factory reset) in the HT's menu was hit. I remember most of the layout of the HT's memory when I looked at it via Chirp, but I never saved it. The layout as I remember starts at memory ch 1. From ch 1 to about ch 30 was filled with ham repeater frequencys and simples ch's. all on the (A, top display). Then there was about 20 blank ch's. The 21st ch had FRS1 on the 21st memory ch and so on. I don;t know how to setup the 21st memory ch to on the (B) lower display FRS1 and to rx/tx to the other FRS ht's that I have. Steve, kc7byp(a)gmail.com From the desk of the radio station KC7BYP 10/14/2019

4 4

[chirp_users] <OFF TOPIC>
by Dennis Wage 14 Oct '19

14 Oct '19

Found a really weird bug on my UV5R today by accident. If you have one, try it and see if yours does the same thing. Press and hold PTT. While holding PTT push 1 on the keypad and hold for 5 seconds. This of course sends DTMF #1. If you release the PTT while still holding the 1 button, the radio stays in transmit mode with the microphone on even though the display says it's back in receive mode. I found no way to stop the transmission except to turn off the radio. Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net

1 0

[chirp_users] Unable to program Baofeng GT-3TP
by Tony Argentino 12 Oct '19

12 Oct '19

Hi everyone, I wanted to program a new frequency in my transceiver but I now get an error message when I look at COM4 in device manager...it reads...PL2303HXA PHASED OUT SINCE 2012 PLEASE CONTACT YOUR SUPPLIER. I have re installed Prolific USB to serial Adaptor driver version 3.3.2.102 which show up correctly in Device Manager until I connect my cable to the pc USB port. I have used the programming software and generic cable successfully prior to the latest version of CHIRP. Can anyone advise me for a fix. Thanking you in advance. Tony Argentino

3 2

[chirp_users] Can someone tell me how to fix the error below
by Jerry Kite 11 Oct '19

11 Oct '19

Error reading data from radio: not the amount of data we want Jerry Surprise AZ

3 4

Re: [chirp_users] Can someone tell me how to fix the error below
by JOCK SOUTAR 11 Oct '19

11 Oct '19

Take the right real wheel off your neighbors car. On Friday, October 11, 2019 al <chirp_users(a)intrepid.danplanet.com> wrote:  Oh. C’mon give us a clue … what os, what radio, what version of the program … just little things that might help those who know solve your problem. From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Jerry Kite Sent: Friday, October 11, 2019 10:14 To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Can someone tell me how to fix the error below Error reading data from radio: not the amount of data we want Jerry Surprise AZ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

Re: [chirp_users] Chirp retired on Fedora 31+
by JOCK SOUTAR 10 Oct '19

10 Oct '19

I'm on Windows 10 Pro and never have any problems. On Wednesday, October 9, 2019 Steven A. Falco <chirp_users(a)intrepid.danplanet.com> wrote: This is why I posted my question about chirpw and python3 last week (on 10/3). Part of chirpw works, but I am not able to do import / export, apparently because of some change to the way tooltips work in python3. I haven't tested exhaustively, so there may be other issues as well. Steve On 10/8/19 1:47 PM, Tony Fuller wrote: > Yes, if you stumble upon and closed/rejected issues you'll see the duplicate is of https://chirp.danplanet.com/issues/495 > > Tony > > Get Outlook for Android <https://aka.ms/ghei36> > > ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ > *From:* chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of Michael Downey N2UN <n2un(a)arrl.net> > *Sent:* Tuesday, October 8, 2019 12:01:42 PM > *To:* chirp_users(a)intrepid.danplanet.com <chirp_users(a)intrepid.danplanet.com> > *Subject:* Re: [chirp_users] Chirp retired on Fedora 31+ > > On Tue, Oct 8, 2019, at 08:40, Richard Shaw wrote: >> Just an FYI but Chirp is now retired on Fedora 31 and up due to python 2 being removed. > > Thanks for this update. Is there an open issue to follow for python 3 support? > > 73, > Michael N2UN > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Tony F at goldstar611(a)hotmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Steve Falco at stevenfalco(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] 64-bit Python.app for macOS 10.15 Catalina
by Jeff Zarge - K3JRZ 10 Oct '19

10 Oct '19

Will there be a 64-bit version of the Python app in the KK7DS Python runtime or should Mac users just update the version of Python that they're running on their own to keep Chirp working when updating to macOS 10.15? Thanks & 73, Jeff K3JRZ https://www.qrz.com/db/K3JRZ 100WAAW <http://100wattsandawire.com/thegathering/> #404

4 6

[chirp_users] Chirp retired on Fedora 31+
by Richard Shaw 09 Oct '19

09 Oct '19

Just an FYI but Chirp is now retired on Fedora 31 and up due to python 2 being removed. Thanks, Richard KF5OIM

4 3

Re: [chirp_users] Can't get a Redmine account created
by JOCK SOUTAR 07 Oct '19

07 Oct '19

There is no password for CHIRP. I'm not sure why they ask for one but there is no such animal. Just contact their support team and ask you questions. They are volunteers so dot expect an immediate reply. Allow at least 1 weeks time. Jock Kc6iih On Sunday, October 6, 2019 Michael Downey N2UN <chirp_users(a)intrepid.danplanet.com> wrote: Hi folks, I've been trying to get an account created on the redmine site, so I can enter a new model request. I seem to have an account, but I can't log in. I figured it must be a problem with my password, so I try to reset it and log in, but that fails. Reproducing the error: 1. Go to https://chirp.danplanet.com/login and fill out the "Login" and "Password" fields, click "Login" button. 2. Get a red box that says "Invalid user or password". 3. Click the link for "Lost password", fill out my email address and click "Submit". 4. Open the email that arrives and click the forgot password link. Enter a new password in the form and confirm it. 5. Try the log in again with the newly-updated password. Expected behavior: I am able to log in to create issues, etc. Actual behavior: I instead still once again get the red box that says "Invalid user or password". Is there any known issue with the system or any way to troubleshoot what might be wrong my account? Of note, the "lost password' feature doesn't seem to work unless the system actually knows my email address, other email addresses that aren't registered get an error message. So I know I'm in there to some extent.... 73, Michael N2UN _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 2