October 2019 - Users - lists.chirpmyradio.com

[chirp_users] XIAMEN X-008
by fathorrachman rachman 22 Oct '19

22 Oct '19

i can't use to reprogramed xiamen x-008.. and i can't write the radio which one that i can use it... thanks God Bless all of you team..

2 1

[chirp_users] New Daily Build
by Build System 22 Oct '19

22 Oct '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20191022 A list of the changes included in this build (since the last daily) follows: Changes for Build #596 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-A58S] Add Support for Baofeng UV-82III This patch adds support for "waterproof" Baofeng tri-band models. BF-A58S UV-82III (alias) related to #7163 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-A58S] Add Support for Baofeng UV-82III This patch only cleans up driver style issues prior to adding support for new models. There are no changes in functionality. Add baofeng_wp970i.py driver to cpep8.manifest Clean up driver style issues (correct indentation, remove whitespace, add/remove blank lines, etc) related to #7163

1 0

[chirp_users] CHIRP on py3
by Nicolas Pike 21 Oct '19

21 Oct '19

I see there is a py3 branch. What is the state of CHIRP on Python 3? I am intending to further improve the FT70 driver, and a pal as an FT3 which he has done some outline memory mapping work for. Should we be developing against the py3 branch? Thanks. Nicolas

5 11

[chirp_users] Error encountered
by Alex Moen 20 Oct '19

20 Oct '19

I have "chirp daily" installed on my Linux Mint 18 laptop. Recently, I attempted to connect to my HT and the program did not start. So, I tried at the command line, and encountered this: alexm@alexm-Surface-Pro ~ $ sudo chirpw Traceback (most recent call last): File "/usr/bin/chirpw", line 20, in <module> from chirp import chirp_common ImportError: No module named 'chirp' Any ideas?? Thanks, Alex

3 3

[chirp_users] OT Antenna Help
by Glenn N0YJV :) 20 Oct '19

20 Oct '19

Hi, I was wondering if someone could write me off-list to answer a few questions about building a loop antenna. Thanks. Glenn

1 0

[chirp_users] Fwd: Baofeng BF-R3
by Gary or Coleen Ferguson 19 Oct '19

19 Oct '19

Y Subject: Baofeng BF-R3 Any suggestions on how to use CHIRP with the Baofeng BF-R3??? thanks!!!

2 4

Re: [chirp_users] chirp_users Digest, Vol 130, Issue 15 and Jeff Zarge - K3JRZ <K3JRZ@arrl.net>
by Christopher F. Beesley 19 Oct '19

19 Oct '19

Hi Jeff, Chris here. I had the same problem some time ago, it was never resolved because like yourself I could no longer log in to the site. I'm using windoze ten on an Intel-alike PC. I'd try logging-in on a Raspberry Pi but I can't remember either the new or the old password now... I'm not even sure that this reply will work. Glad its not just me! 73, Chris, G4OUG ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: 19 October 2019 19:00 To: chirp_users(a)intrepid.danplanet.com <chirp_users(a)intrepid.danplanet.com> Subject: chirp_users Digest, Vol 130, Issue 15 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: New Daily Build (Jeff Zarge - K3JRZ) ---------------------------------------------------------------------- Message: 1 Date: Fri, 18 Oct 2019 17:30:53 -0400 From: Jeff Zarge - K3JRZ <K3JRZ(a)arrl.net> Subject: Re: [chirp_users] New Daily Build To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CACAtCUMj1QwF73eUqsBeSuTtPSqkT7gV2GCVJMYdiw1is4omRg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" The new unified version for the Mac (macOS 10.15 Catalina - chirp-unified-daily-20191018.app) doesn't open for me. It pops open in my dock for a second and then goes away. Did the same in the last unified version also. Also, tried to give feedback on the website under Issues, but I can't log in with the account I created. I do the "Fogot Password" route and reset my password, but the site still doesn't let me in. Thanks & 73, Jeff K3JRZ https://www.qrz.com/db/K3JRZ 100WAAW <http://100wattsandawire.com/thegathering/> #404 On Fri, Oct 18, 2019 at 3:08 AM Build System <donotreply(a)danplanet.com> wrote: > Greetings, > > A new daily build of CHIRP is available. This includes changes made > directly to the tree yesterday, and may include additional features, > bug fixes, and/or bugs. If you are interested in trying it, grab it > from the following location: > > http://trac.chirp.danplanet.com/chirp_daily/daily-20191018 > > > A list of the changes included in this build (since the last daily) > follows: > > Changes for Build #595 > [Dan Smith <dsmith(a)danplanet.com>] Revert r3233 to address likely > regression. > > According to bug #7067, we regressed the h777 module for some variants, > whilst fixing > the root issue. This reverts that change to the less-broken original state > while we > try to figure out something that will work for all models. > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jeff at k3jrz(a)arrl.net > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] New Daily Build
by Build System 18 Oct '19

18 Oct '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20191018 A list of the changes included in this build (since the last daily) follows: Changes for Build #595 [Dan Smith <dsmith(a)danplanet.com>] Revert r3233 to address likely regression. According to bug #7067, we regressed the h777 module for some variants, whilst fixing the root issue. This reverts that change to the less-broken original state while we try to figure out something that will work for all models.

2 1

[chirp_users] BaoFeng UV-82X3
by Jim Hooper 16 Oct '19

16 Oct '19

What might be the process for adding a new radio to the CHIRP supported-radio list? Asking about the BaoFeng UV-82X3 Tri-Band radio. 73 Hoop K9QJS

3 2

[chirp_users] Rs: setting up a uv-5ra via Chirp
by Steve 16 Oct '19

16 Oct '19

Hi chirp_users. I am having trouble understanding Chirp. I have no problem programming my Baofeng UV-5RA HT direct from the ht's onboard keyboard. I don't understand some of the columns on the Chirp display after uploading the ht's memory. The memory in the ht should be clean after the factory reset. In the attached picture memory channels 1 to 10 are the way all of the memory channels are after the memory up load to Chirp after the ht factory reset. Now to the collumns, I know the column (tone) is for the tx ctcs and I assume that the (tonesql) is the rx ctcs. Why do the ctcs columns have 88.5hz in both columns. Those columns should be empty or 00.0 like in ch 11 in the attached picture. And what are the columns DTCS code,DTCS rx code DTCS pol. Why is there numbers and letters in the DTCS columns? Cross Mode I know, Duplex I know, offset I know, mode and power I know. Somewhere in Chirp is the setup to program the displays MDF (A) and MDF (B). I have seen a lot of chats saying it is there but no direct info to find it. I could use some help please. The listing of the attachments is as following: (1) ht at factory reset.jpg (139.7 K) Steve, kc7byp(a)gmail.com From the desk of the radio station KC7BYP 10/14/2019

5 10