January 2016 - Users - lists.chirpmyradio.com

[chirp_users] win 10
by William Coleman 30 May '16

30 May '16

Hi everyone ! Just a quick note. I have the latest release version of chirp working OK with Windows 10 64bit on my desktop . There have been no issues so far with chirp while running windows 10 with either reading or transferring data to and from my GT-5 . I had to roll back the 3.6 driver to 3.2.2.0 that windows had initially installed . It was giving me a cannot start device error message. Once I rolled back the drivers there was no further issues. Will C. KF7SSF

5 5

[chirp_users] Chirp and Icom IC-7200
by Bill 17 Feb '16

17 Feb '16

Ok so I am wanting to use chirp to upload memories to my Icom IC-7200 Amateur Radio. Now the IC-7200 has a USB and a CIV connection. My understanding is that the USB should work, But I cannot seem to get it to work. I do not have a CIV cable. So does anyone have any experience with the IC-7200? Can I use the USB connection to upload memories? Or am I going to need a CIV cable? Thanks Bill

7 15

[chirp_users] WIN 10
by ZIP-G 08 Feb '16

08 Feb '16

to all, i have been reading that win 10 home 'automatic updates' cannot be turned off but win 10 home pro can. since i will have to use the older driver for the prolific chip will win 10 work or not? thank you, 73 zippy

8 11

[chirp_users] IC-92AD issues
by Wenlock Burton 31 Jan '16

31 Jan '16

Hi, I've been finding that if I click all the tabs I can get them all populated with data. Although the terminal reports: ERROR: Unable to find selected: iter must be a GtkTreeIter Curious. It still finishes with the status bar showing that it is still fetching the last memory and locks up. Only way to continue is to force quit I did notice the last memory displayed is 797 although the count in the status bar goes up to 849. hmm. Still throws an exception: ERROR: Exception running RadioJob: string index out of rangeERROR: -- Exception: --ERROR: Traceback (most recent call last): File "/usr/lib/pymodules/python2.7/chirp/ui/common.py", line 116, in _execute result = func(*self.args, **self.kwargs) File "/usr/lib/pymodules/python2.7/chirp/drivers/ic9x.py", line 134, in get_memory mem = ic9x_ll.get_memory(self.pipe, self.vfo, number) File "/usr/lib/pymodules/python2.7/chirp/drivers/ic9x_ll.py", line 490, in get_memory if rframe.get_payload()[3] == '\xff':IndexError: string index out of range ERROR: ----------------ERROR: Job Args: (445,)ERROR: Job KWArgs: {}ERROR: Job Called from: File "/usr/bin/chirpw", line 145, in <module> gtk.main() File "/usr/lib/pymodules/python2.7/chirp/ui/mainapp.py", line 1406, in mh self.do_download(*args) File "/usr/lib/pymodules/python2.7/chirp/ui/mainapp.py", line 687, in do_download self.do_open_live(radio) File "/usr/lib/pymodules/python2.7/chirp/ui/mainapp.py", line 406, in do_open_live eset = editorset.EditorSet(radio, self, tempname=tempname) File "/usr/lib/pymodules/python2.7/chirp/ui/editorset.py", line 143, in __init__ self._make_device_editors(device, devrthread, index) File "/usr/lib/pymodules/python2.7/chirp/ui/editorset.py", line 78, in _make_device_editors memories = memedit.MemoryEditor(devrthread) File "/usr/lib/pymodules/python2.7/chirp/ui/memedit.py", line 1376, in __init__ self.prefill() File "/usr/lib/pymodules/python2.7/chirp/ui/memedit.py", line 1063, in prefill job = common.RadioJob(handler, "get_memory", i) ^CTraceback (most recent call last): File "/usr/bin/chirpw", line 145, in <module> gtk.main() Wenlock

1 0

[chirp_users] inexpensive Dual Band Mobile radios?
by Dave Nathanson 28 Jan '16

28 Jan '16

[This is sort of off-topic, but hinges on CHIRP support for the radio] Howdy, I'd like to get a recommendation for a dual band mobile radio for a new ham that will (probably) not use it a whole lot. But it needs to work reliably enough, even if not a lot of features. Actually less features is fine, that is just less stuff to not understand & less to forget between uses! :-) Mounting a UV5R in a car doesn't seem like a good idea. Can anyone offer anything good or bad about any "inexpensive" mobile dual band ham radio, including the Leixen VV-898 or Jetstream JT270M (apparently the same radio). It is one of the few cheap Mobile units I see on the list of CHIRP supported radios. http://chirp.danplanet.com/projects/chirp/wiki/Home Amazon reviews seem fairly ok, especially for $99. I'm interested in a CHIRP-supported radio. This is intended for an 1997 Jeep Cherokee, and a small radio is probably a better match. It does need to be a dual bander. If the cost gets anywhere even near $200, I'd just recommend the Yaesu 7900 or Yaseu 8800. But for this situation, I'm open to hearing about cheaper alternatives that I might be able to recommend until this new ham grows into the "sport". Thanks for your helpful council. 73, Dave Nathanson KG6ZJO PS: if you know of a better forum to ask about CHIRP compatible mobile radios, it's ok to shoot me a pm or direct email about it.

19 27

[chirp_users] schematics
by Jon GrosJean 28 Jan '16

28 Jan '16

Is there a good place to post a schematic diagram for the interface between an FTDI-1232 board and Yaesu FT7900? Jon

3 3

[chirp_users] Icom IC-T81A, Icom IC V80 and Icom IC V8
by Robert Campbell 28 Jan '16

28 Jan '16

I have read several request to add the Icom IC-T81A, Icom IC V80 and Icom IC V8 with the offer to loan radios for programs. Are there any updates on these programs, or is there a radios already on the list that could be used. Thanks in advance for any information. de WA5RACWe don't know what Tomorrow will bring so,We Thank The Father, for the Son, for Whom without we would have no tomorrow. "see you on the radio"

1 0

[chirp_users] Wrong version number being reported - fixed
by David Chatterton 28 Jan '16

28 Jan '16

Just a follow-up to my previous message on the above. Today's upgrade to 20160128~wily~1, as offered through Ubuntu's Software Updater, was installed as expected and the correct version (CHIRP daily-20160128) was displayed in the About CHIRP pane. It seems that the exercise of searching the computer for any remaining Chirp files and deleting them before re-installing the latest version (via the Synaptic Package Manager) did the trick. Thanks once again for your helpful advice. David Chatterton M6FNY

1 0

[chirp_users] New Daily Build
by Build System 28 Jan '16

28 Jan '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160128 A list of the changes included in this build (since the last daily) follows: Changes for Build #380 [Mark Adams <madams74(a)gmail.com>] [FT-50] Yaesu FT-50 driver overhaul & improved support. Fixes #1233. [Pavel Milanes (CO7WT) <co7wt(a)frcuba.co.cu>] [PATCH][FD-268] Fix author declaration, fixes #2169 [Pavel Milanes (CO7WT) <co7wt(a)frcuba.co.cu>] [PATCH][TK-760G] Fix author declaration, fixes #2999 [Pavel Milanes (CO7WT) <co7wt(a)frcuba.co.cu>] [PATCH][TK-868] Fix bad amount of channels declared, fixes #3139 Also update the author on the right place. [Marco Filippi <iz3gme.marco(a)gmail.com>] [TS2000] Fix radio modes Driver request CWR, FSK and FSKR, they must match in common mode list Discovered while working on #3185 related to #3103 [Marco Filippi <iz3gme.marco(a)gmail.com>] [IC-7200] Add support for filter and digital Discovered while working on #3185 [Marco Filippi <iz3gme.marco(a)gmail.com>] [IC-7200] Fix radio properties Radio have a whider receiver, 201 memories (where last two are scan edges) and supports reverse CW and RTTY Discovered while working on #3185 [Marco Filippi <iz3gme.marco(a)gmail.com>] [CIV radios] Fix common code for radio with no skip flag Introducing skip support for IC-7000 common CIV code have been modified but other radio (eg 7200) do not have that flag Introduced with fix for #3085 Fix #3185 [Tyler Tidman <tyler.tidman(a)draak.ca>] Add American Association of Railroads AAR assigned channel list. Fixes #589.

1 0

[chirp_users] Thank You, Thank You, Thank You
by Glen Christensen 27 Jan '16

27 Jan '16

To whomever did the work, Thank You very much for adding banks support in Chirp for the FT-60R! I'm just reviewing my programming and realize that I last uploaded it back in May 2015. I don't believe it had banks support back then. Regards, Glen KJ6ZQH

1 0