December 2013 - Users - lists.chirpmyradio.com

[chirp_users] I got an unsupported xinchuang TR-N7 radio, how can I add support for it?
by mofo syne 26 Feb '15

26 Feb '15

Is there any place I can upload... say a "serial dump" file of communication between it and some propriety software (named SV83) ? I managed to create a serial sniffer cable, so if I have a place to upload it, then you guys could inspect and add support for it. Heck I think having a dedicated place to upload serial dumps would be great for reverse engineering efforts.

6 8

Re: [chirp_users] Baofeng V6
by w4grj 07 Jan '14

07 Jan '14

I am using the Baofeng software, error message cannot connect to radio It is not a cable or port issue. Jack W4GRJ From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of John LaMartina Sent: Saturday, December 28, 2013 2:29 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Baofeng V6 Is the programming of the UV-6 software or a driver/cable issue. What error messages are you getting? John K3NXU . . . http://www.miklor.com From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of w4grj Sent: Saturday, December 28, 2013 2:15 PM To: 'Discussion of CHIRP' Subject: Re: [chirp_users] Baofeng V6 I have a UV-6, also cannot get it to program with the Baofeng software. Has anyone successfully programmed the UV-6? Thanks, Jack From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Michael Walker Sent: Friday, December 27, 2013 10:14 PM To: Discussion of CHIRP Subject: Re: [chirp_users] Baofeng V6 Yes, it isn't a port issue. Mike On Fri, Dec 27, 2013 at 10:11 PM, Amnon Zohar <amnon.zohar(a)gmail.com> wrote: could you comunicate with any other radio? בתאריך 28 בדצמ 2013 05:07, "Michael Walker" <va3mw(a)portcredit.net> כתב: Hi All I know that this is a little off topic and this radio isn't supported by Chirp, but has anyone actually been able to program one? This is a 16 Channel VHF only unit. I've tried just about all the software from Baofeng that I can find, but I have not found anything that will talk to the radio. I am 'assuming' it is using a Kenwood cable configuration as well. Mike va3mw _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

11 23

[chirp_users] Memory requirements, Operating system requirements,
by David M. Calpino 29 Dec '13

29 Dec '13

Can I program my Baofeng Radios with 16GB Android tablet?

6 9

[chirp_users] New Daily Build
by Build System 29 Dec '13

29 Dec '13

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20131229 A list of the changes included in this build (since the last daily) follows: Changes for Build #254 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-B5] Code Cleanup change Beep Prompt setting from a list to an inverted boolean reformat long lines to be less than 80 characters #1323 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-888S] Update Basic Settings edit structure and expose additional setting add code to allow settings to be updated edit to insure all lines are less then 80 characters long add Scan Mode setting edit Vox Level setting range to be consistent with the OEM software edit some setting names related to #1195 (also #1193 and #1143) [Jim Unroe <rock.unroe(a)gmail.com>] [IC-Q7A] Code Cleanup forgot to clean up a section of code that I borrowed from another driver related to #1317 [Jens Jensen <kd4tjx(a)yahoo.com>] [uv-b5] fix memory channel settings range (should be 1-99) #1315

1 0

[chirp_users] FT1DR ???
by Brian Chapman 28 Dec '13

28 Dec '13

Is anyone working on adding this radio ? I got one for Christmas and would be happy to beta test !!! Brian. nb9e Sent from my iPhone

2 2

[chirp_users] Baofeng V6
by Michael Walker 28 Dec '13

28 Dec '13

Hi All I know that this is a little off topic and this radio isn't supported by Chirp, but has anyone actually been able to program one? This is a 16 Channel VHF only unit. I've tried just about all the software from Baofeng that I can find, but I have not found anything that will talk to the radio. I am 'assuming' it is using a Kenwood cable configuration as well. Mike va3mw

5 6

Re: [chirp_users] Baofeng BF-666
by kc6iih 27 Dec '13

27 Dec '13

It is only 70 cm. Not useful in my area. Jock KC6IIH Sent from Samsung tabletRonny Julian <k4rjjradio(a)gmail.com> wrote:Does Chirp support this radio? Under $20 on eBay is a price point for GMRS or Amateur I can't pass up. I'm going to order 4 of these. Baofeng BF-666 http://www.ebay.com/itm/New-Baofeng-BF-666-2-Way-Radio-UHF-FM-16CH-Transcei…

1 0

[chirp_users] Baofeng BF-666
by Ronny Julian 27 Dec '13

27 Dec '13

Does Chirp support this radio? Under $20 on eBay is a price point for GMRS or Amateur I can't pass up. I'm going to order 4 of these. Baofeng BF-666 http://www.ebay.com/itm/New-Baofeng-BF-666-2-Way-Radio-UHF-FM-16CH-Transcei…

3 5

[chirp_users] saving settings other than just channel memories?
by eric oyen 25 Dec '13

25 Dec '13

greetings everyone, I am wondering if the chirp program saves more than just the channel memory fields to a csv file? I would like to have all settings from my UV5R saved so that I may use a text editor to make my modifications with. Its a lot simpler than trying to navigate the interface in Linux. Inquiring minds want to know! -eric

2 1

[chirp_users] some issues with recent daily biold..
by eric oyen 25 Dec '13

25 Dec '13

ok, I am using this program on Linux as it isn't screen reader friendly anywhere else. here's a couple of issues: 1. When importing from data sources, I cannot check or uncheck individual items 2. I cannot simply shift values down one channel (moving 3 to 2 , etc.). I use Ubuntu 13 precise (LTS version) with all packages updated. I also use ORCA screen reader as I am blind. SO, any chance of changing this so it works a little more nicely? btw, I am not the only blind ham around here that may have to use software to program a chinese radio (or even one of the others for that matter).. A lot of us (and there are quite a few thousand of us here in the US) would certainly appreciate it if the developer would address the accessibility issue on windows or OS X (as not many of us use Linux). Those of us blind hams who do use Linux would certainly appreciate a few small changes in the interface to make it a little more screen reader (using ORCA or emacspeak) friendly. there is an FAQ here: http://empowermentzone.com/NonvisualDevelopmentFAQ.htm there is an entry for python scripting there that would make it a lot easier to understand (and setup for accessible UI structures.. in fact, heres the FAQ in question: /Quote What tools are recommended for developing with the Python language? Install Python from http://python.org Install the wxPython package for creating accessible GUIs from http://wxPython.org For Windows development, install the Python for Windows extensions at http://sourceforge.net/projects/pywin32/ Also install py2exe, a package for building stand-alone executables from http://py2exe.org In Python, code indentation is syntactically required rather than stylistically optional. The EdSharp editor includes features that help screen reader users manage indentation efficiently, available at http://EmpowermentZone.com/edsetup.exe Quote/ please give this your best consideration. thanks Eric (n7zzt)

2 1