- Users - lists.chirpmyradio.com

Re: [chirp_users] Legal Frequencies?
by 700hpvette1＠cox.net 08 Sep '16

08 Sep '16

5 5

[chirp_users] Radio ID tones
by enrique＠sanchezfranco.com 08 Sep '16

08 Sep '16

Hello everyone...I am new to programming radios via CHIRP; I have succesfully programmed frequecies, CTCSS and offset freqs and etc...and everything works fine. I have programmed freqs into memories and it all works great, yet, I'd like to ID radios with DTMF tone bursts at the beggining of the transmission, yet I can only "send" the tones while in Frequency mode and NOT in channel/memory mode..is there a way to do this via CHIRP...I cannot even manually 'force' the radio to do it...as soon as I exit the MENU mode, the radios reset the PTT-ID to 'OFF'...any ideas? all the best and thank you for your kind advice. enrique

3 2

[chirp_users] Help Please
by Pierre CobraTeam 06 Sep '16

06 Sep '16

Hi, i have a prob whit my new Baofeng UV-5X3, the prob is i am not able to communicate whit the radio whit my computer i have the cable Help please

2 1

[chirp_users] Programing beofeng uv 5x3
by Eric Lanzl 06 Sep '16

06 Sep '16

Hello List members, This is my first post to the list. I have a couple of questions about the use of the chirp software. I just acquired a Beofeng UV 5x3 and am learning the Chirp software. 1. I notice that the program seems to default to "cross" in the tone mode column. I was trying to figure out if one cane change several lines at once to "tone". I cannot find if this is possible so I programed each separately. 2. In the cross mode column, the program seems to keep defaulting to tone->tone despite that I saved it as tone only, Any ideas on why it does this? Is there a way to get to tone only? If one has tone selected in the tone mode column is it not putting the radio in tone squelch mode even if the cross mode column is saying tone->tone? I have not been able to find instructions on how this works. 3. I attempted to put in some skipped channels for scanning. I cannot get the program to show which ones I labeled as the skipped channels. Also when I attempted to put in skipped channels the program seems to change the tone mode and cross mode w/o my doing anything to those columns. Is there an easier way to put in skipped channels rather than each one separately? Any help on these issues and if there is a place I can find some instructions would be greatly appreciated. Thanks to all. Eric WB9JNZ

2 1

[chirp_users] ... Could not open Com 3
by Ken G 06 Sep '16

06 Sep '16

I haven't downloaded from my UV-5r for quite some time but today I downloaded the latest version of Chirp, plugged in the cable and I get the following error thrown up by Chirp - "could not open port COM3: [Error 2] The system cannot find the file specified." .. and this error for the port in Device Manager of Windows 10 .. "This device cannot start. (Code 10) {Not Enough Quota} Not enough virtual memory or paging file quota is available to complete the specified operation." Previously I've had no problems. I rebooted hoping to free up any previously locked memory and got the same result. My computer is an HP Probook 4540s with 8gb ram. The paging file is set at 1905mb which is windows recommended size. What do I do now? Ken G.

4 4

[chirp_users] New Daily Build
by Build System 06 Sep '16

06 Sep '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160906 A list of the changes included in this build (since the last daily) follows: Changes for Build #430 [Brian Dickman <brian.maybe(a)gmail.com>] [leixen] [patch 2 of 2] Adds new model, Leixen VV-898S (tri-power 25W) Also adds alias for VV-898E. Resolves #3889, #3327, #3065. [Brian Dickman <brian.maybe(a)gmail.com>] [leixen] [ 1 of 2 ] Migrate radio paramters into class to prepare for multiple models Parameterize the mmap to account for changes between the 898 and 898S models. Move power levels into the class out of the global module level. Extend model matching to additional bytes to tell apart additional models. Related to #3889, #3327, #3065. [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5X3] Add DTMF Settings (RX and TX) to BTech UV-5X3 This patch exposes the structures and adds DTMF related settings: - PTT-ID codes - ANI settings and codes - Master and Vice control IDs - Control settings and codes (Inspection, Monitor, Stun, Kill, Revive) - other DTMF related settings related to #3931

1 0

[chirp_users] Kill Transmit Capability
by Pops Carter 05 Sep '16

05 Sep '16

On our radios I set all the public service bands to duplex=off. That prevents xmit on those frequencies. Baofung UV5-R radios. -- *We The People* founded this country. *We The People* can save this country.

1 0

[chirp_users] The VHF low band is still in use
by J. David Aten 05 Sep '16

05 Sep '16

One of the largest police agencies, with thousands of radios, and covering one of the largest geographical areas, still uses VHF low band, and has absolutely no plans on moving, or changing. That is the California Highway Patrol. (CHP).

4 3

[chirp_users] trying to put in local police frequencies
by Glenn 05 Sep '16

05 Sep '16

Hi, I searched on RadioReference.com for some local frequencies by zip code, and it gave me a list. I am planning on trying to enter them into a CSV file that I had previously exported. I am trying to test these frequencies on my Baofeng 5R and it does not allow me to enter the frequency, and based on the numbers, I'm thinking that that the 5R does not go to this frequency range. example: 39.820000 I thought that there is a way to force this type of radio to scan in those areas. Thanks for any help. Glenn

10 11

[chirp_users] New Daily Build
by Build System 05 Sep '16

05 Sep '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160905 A list of the changes included in this build (since the last daily) follows: Changes for Build #429 [Dan Smith <dsmith(a)danplanet.com>] [LT-725UV] Add Test image #3745 [Jim Unroe <rock.unroe(a)gmail.com>] [LT-725UV] Add Support for LUITON LT-725UV This patch adds basic support for the LUITON LT-725UV mobile radio. #3745 [Brian Dickman <brian.maybe(a)gmail.com>] [leixen] Revert 94db968fce11, unneeded patch that was refactored Related to #3899

1 0