- Users - lists.chirpmyradio.com

[chirp_users] Can't install chirp on Ubuntu 16.10
by Tom Consodine 15 Oct '16

15 Oct '16

The Chirp repo doesn't seem to work with Ubuntu 16.10. I get errors: W: The repository 'http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu yakkety Release' does not have a Release file. E: Failed to fetch http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu/dists/yakkety/main… 404 Not Found E: Some index files failed to download. They have been ignored, or old ones used instead. -- Tom ND5Y

5 7

[chirp_users] New Baofeng
by Glenn 15 Oct '16

15 Oct '16

Hi, I just got a new Baofeng for my birthday. It is a BF-F9 V2. I use Chirp on Ubuntu. First off, is this radio in the list? And if so, will Ubuntu update to the latest Chirp? Thanks. Glenn

2 2

[chirp_users] New Daily Build
by Build System 14 Oct '16

14 Oct '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20161014 A list of the changes included in this build (since the last daily) follows: Changes for Build #443 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-888] Forgot to set rf.can_odd_split! This patch adds "rf.can_odd_split = True" so driver will pass failed test. Related to #2291 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Expand PTT-LT to 50 The original menu 20 [PTT-LT] setting range for the UV-5R (and other variants including the UV-82) was from 0 to 30. This patch expands the upper limit to 50 to match the upper limit of the currently shipping radios. related to #4127

1 0

[chirp_users] Can't download from Yaesu FT-817
by Carla Ruigh 13 Oct '16

13 Oct '16

Hello, I am having a heck of a time trying to start the process of programming my ft817 by doing the initial download. I bought one cable, and after multiple failures using both Mac and PC, I bought another cable, the more expensive one. On the Mac side, I’ve downloaded and installed the ftdi drivers from here: http://www.ftdichip.com/Drivers/VCP.htm . Still does not work. The radio just goes into “error”. I’m not getting an error message from Chirp. The Radio screen just starts flashing “Error” a few seconds after I put it into transmit mode. The Drivers appear to be working as the download dialog shows “dev/cu.usbserial-AI04KBP8” as an option. I really don’t have any idea what else to try. On the PC side, (under parallels), under “Devices” I connect the FT232R USB UART to the PC. Same thing happens. I go to download from radio, now “Com6” is what shows up, when I hit transmit it just errors out after a few seconds. No error message from CHIRP. The clone dialog just sits there open. Would sure appreciate any suggestions. Getting really frustrated. –cj- On 10/12/16, 5:17 AM, "awake" <chirp_users-bounces(a)intrepid.danplanet.com on behalf of awake(a)0324am.net> wrote: Hi, A while ago I purchased a TYT-8000E and I'm trying to figure out whether there's a way how to make it work with chirp. It's quite a decent Chinese model, sort of a better built Baofeng with 10W transmit power and an accordingly sized battery :) I've seen there's a new model request #2837 for it, from about a year ago, but no activity on it. Are there any other people on this list using this radio? If yes, which SW are you using to program it? Also, if there's a developer willing to implement the support for this radio, I could provide hardware on loan and/or help out with testing.. Cheers, rad0 -- Connection closed by remote ghost. _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Carla Ruigh at swngdncr(a)garlic.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 4

Re: [chirp_users] Can't download from Yaesu FT-817
by Carla Ruigh 12 Oct '16

12 Oct '16

(Added the last entries from the debug.log below) On 10/12/16, 6:24 PM, "Carla Ruigh" <chirp_users-bounces(a)intrepid.danplanet.com on behalf of swngdncr(a)garlic.com> wrote: Hello, I am having a heck of a time trying to start the process of programming my ft817 by doing the initial download. I bought one cable, and after multiple failures using both Mac and PC, I bought another cable, the more expensive one. On the Mac side, I’ve downloaded and installed the ftdi drivers from here: http://www.ftdichip.com/Drivers/VCP.htm . Still does not work. The radio just goes into “error”. I’m not getting an error message from Chirp. The Radio screen just starts flashing “Error” a few seconds after I put it into transmit mode. The Drivers appear to be working as the download dialog shows “dev/cu.usbserial-AI04KBP8” as an option. I really don’t have any idea what else to try. On the PC side, (under parallels), under “Devices” I connect the FT232R USB UART to the PC. Same thing happens. I go to download from radio, now “Com6” is what shows up, when I hit transmit it just errors out after a few seconds. No error message from CHIRP. The clone dialog just sits there open. Would sure appreciate any suggestions. Getting really frustrated. –cj- [2016-10-12 18:35:05,398] chirp.ui.common - ERROR: ---------------- [2016-10-12 18:35:05,398] chirp.ui.clone - ERROR: Clone failed: Failed to communicate with radio: (9, 'Bad file descriptor') [2016-10-12 18:35:05,398] chirp.ui.clone - DEBUG: Clone thread ended [2016-10-12 18:35:28,377] chirp.ui.mainapp - DEBUG: User selected Yaesu FT-817ND (US) on port /dev/cu.usbserial-AI04KBP8 [2016-10-12 18:35:28,383] chirp.ui.clone - DEBUG: Clone thread started

1 0

[chirp_users] TYT-UV-8000DE
by awake 12 Oct '16

12 Oct '16

Hi, A while ago I purchased a TYT-8000E and I'm trying to figure out whether there's a way how to make it work with chirp. It's quite a decent Chinese model, sort of a better built Baofeng with 10W transmit power and an accordingly sized battery :) I've seen there's a new model request #2837 for it, from about a year ago, but no activity on it. Are there any other people on this list using this radio? If yes, which SW are you using to program it? Also, if there's a developer willing to implement the support for this radio, I could provide hardware on loan and/or help out with testing.. Cheers, rad0 -- Connection closed by remote ghost.

1 0

[chirp_users] New Daily Build
by Build System 12 Oct '16

12 Oct '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20161012 A list of the changes included in this build (since the last daily) follows: Changes for Build #442 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-888] Add "off" duplex support and compatibilty fix This patch... - adds an "off" duplex (ie disable transmission) setting to the h777.py driver. - provides a fix that improves compatiblity with the OEM software. Developed by Marcos Vives. Related to #2291 [Jim Unroe <rock.unroe(a)gmail.com>] [GMRS-V1] Update Model Name This patch corrects the model name of the BTech GMRS-V1. related to #4119

1 0

[chirp_users] Baiston BST-520
by Bill Archer 11 Oct '16

11 Oct '16

Hi Guys, I recently purchased a Baiston BST-520 UHF transceiver. I have tried programming it using all the Baofeng settings within Chirp but none of these work. I have a Baiston UV-558 which I can programme using the Baofeng UV-5r settings. Any ideas what I can use to programme the BST-520? Regards, Bill Archer. Sent from Mail for Windows 10

1 0

Re: [chirp_users] leixen 898s
by Thom LaCosta 11 Oct '16

11 Oct '16

> >CHIRP is not compatible with the v105 radios. The channel layout in >memory is quite different. There is an open issue looking into it. Thanks...hope you can support it....your software is so much better than the factory stuff. 73, k3hrn

2 1

[chirp_users] leixen 898s
by Thom LaCosta 11 Oct '16

11 Oct '16

Just received a leixen 898s....radio is labeled as v105, but the factory software that works is for v107...http://leixen.com/others/VV898S_USER_V107.rar The latest daily build of chirp does not seem to support this new version.

2 1