- Users - lists.chirpmyradio.com

Re: [chirp_users] Yaesu FT2800M reading error
by Ken Palmer 06 Dec '16

06 Dec '16

On Tue, Dec 6, 2016 at 12:28 PM Ken Palmer <palmerken77(a)gmail.com> wrote: > > That's the only glitch I had and it wasn't really a glitch, more so in my > confusion at the time. No mods have been done yet on it. Check ur > drivers, mayb a conflict somewhere. That's all I got to suggest ! > KO6JM >

1 0

[chirp_users] Wouxun KG UV8D deaf
by Caglar AKGUNGOR 03 Dec '16

03 Dec '16

Hello, I have a Wouxun UV8D which I had programmed last year with an OEM cable with success. Yesterday I have attempted to add some new channels. Everything seemed normal at a first glance but then I have realized that the radio has no reception at all. The frequency, the channel name and all other parameters can be seen on the screen and as far as I can see it transmits on both VHF and UHF (checked with a scope) but no reception, anywhere. I have seen on the net that other people had similar problems, their radios becoming deaf after programming. Does anyone know what is the cause? And the cure? Another problem I have noticed (which didn't happen last year during programming) is that my Mac (a Macbook air) tend to freeze while using Chirp. Can it be something related to the latest build? 73, Caglar TA2UH

3 2

Re: [chirp_users] Wouxun KG UV8D deaf
by Bob Boehme 03 Dec '16

03 Dec '16

Many times it is caused by trying to put a program from an older radio into a newer radio with different firmware.. It bricks the squelch circuit.. You can go to MIKLOR.com to reinsert the proper firmware and make a new program..I have also experienced that problem.. Bob W2IRI From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Andrew Sent: Saturday, December 3, 2016 5:25 AM To: chirp_users(a)intrepid.danplanet.com Subject: Re: [chirp_users] Wouxun KG UV8D deaf On 03/12/16 10:22, Caglar AKGUNGOR wrote: I have seen on the net that other people had similar problems, their radios becoming deaf after programming. Does anyone know what is the cause? And the cure? I've heard of a similar problem which was caused by physical damage to the headphone socket. It wasn't programming which caused the problem, it was plugging the programming cable in which caused it. The audio goes through the headphone jack socket so the internal speaker can be muted when a plug is inserted. If the contact hasn't sprung back properly then the internal speaker will stay muted. Does the RX light turn on when it receives a signal? You could try plugging a speaker/headphones into the socket and see if you hear the audio through that. Although I believe it's a 2.5mm jack plug you'll need! -- Andrew.

1 0

[chirp_users] ATR-22/BF-888 issues
by Bernard Kersefarutz 01 Dec '16

01 Dec '16

First time posting on this subscription list. I'm fairly new to radio stuff, just got a handful of ATR-22s off of Amazon by Amcrest. I am trying to program them through the CHIRP software but to no avail. I keep getting an error message of "No response from radio" Here's the error in the debug.log [2016-11-30 19:28:00,760] chirp.ui.mainapp - DEBUG: User selected Baofeng BF-888 on port COM3 [2016-11-30 19:28:00,792] chirp.ui.clone - DEBUG: Clone thread started [2016-11-30 19:28:00,792] chirp.drivers.h777 - DEBUG: download [2016-11-30 19:28:01,167] chirp.ui.reporting - DEBUG: Reporting exception [2016-11-30 19:28:01,167] chirp.ui.common - ERROR: -- Exception: -- [2016-11-30 19:28:01,167] chirp.ui.common - ERROR: Traceback (most recent call last): File "chirp\ui\clone.pyo", line 249, in run File "chirp\drivers\h777.pyo", line 288, in sync_in File "chirp\drivers\h777.pyo", line 187, in do_download File "chirp\drivers\h777.pyo", line 109, in _h777_enter_programming_mode RadioError: No response from radio [2016-11-30 19:28:01,167] chirp.ui.common - ERROR: ---------------- [2016-11-30 19:28:01,167] chirp.ui.clone - ERROR: Clone failed: No response from radio [2016-11-30 19:28:01,276] chirp.ui.clone - DEBUG: Clone thread ended [2016-11-30 19:28:01,276] chirp.ui.reporting - DEBUG: Reporting model usage: Baofeng_BF-888,download,True [2016-11-30 19:28:01,276] chirp.ui.reporting - DEBUG: Reporting exception [2016-11-30 19:28:01,276] chirp.ui.inputdialog - ERROR: --- Exception Dialog: No response from radio --- [2016-11-30 19:28:01,276] chirp.ui.inputdialog - ERROR: Traceback (most recent call last): File "chirpw", line 67, in <module> AttributeError: 'NoneType' object has no attribute 'split' Would be appreciated if I could get some assistance. Thanks in advance!

4 7

[chirp_users] Icom V8
by djkwasny＠aol.com 01 Dec '16

01 Dec '16

Is there any chance that the Icom V8 will ever be supported? Joe - K5WAS

1 0

[chirp_users] Zastone MP-300
by Eric Chopin 30 Nov '16

30 Nov '16

Greetings, Just bought one of these units (Zastone MP300) and tried to program it with CHIRP without success. When I attempt to download from the radio I get a message 'Receiver did not respond' or sometimes using one of the other suggested radio models from the dropdown menu it say's: 'Radio did not go into clone mode' These responses are from various versions of CHIRP....older or latest I am using Windows XP PRO. Any suggestions? Thanks Eric VE7ECJ

2 1

[chirp_users] HT Recommendations
by Dave Hartman 29 Nov '16

29 Nov '16

A recent addition to our radio club is looking for something to get him on the local repeaters. Woxun and Baofeng come to my mind as good starter radios that don't cost much and work reasonably well. Which HTs would you recommend based on ease of programming, with Chirp of course, reliability, and low cost? Thanks! -- Dave AC2GL -- Dave AC2GL

9 10

[chirp_users] HELLO -MAC USER FOLLOWED K2SON SUGGESTIONS FOR chirp to os 10.12
by robert donchez 29 Nov '16

29 Nov '16

but doesnt work for me followed direction s but followed your instructions in chirp for mac 10.12.1 i never get this otion when i control click on the unzipped ap any help would be appreciated thanks bob donchez wb3hyb control click on the unzipped application and select New Terminal at Folder run this command in the newly opened terminal window: spctl --add $PWD this is what i get when i control click on the app thanks if you can help jim bob donchez wb3hyb 610-833-2966

3 5

[chirp_users] FT-8900
by Doug Iversen, N6DJI＠arrl.net 29 Nov '16

29 Nov '16

Good Morning . . . Trying to figure a way to program my FT-8900 so that I can scan certain groups of frequencies in the hypermemory modes. Since this radio doesn't have "banks" like my 7900 did, I cannot seem to figure this out. Any suggestions? 73, Doug Iversen, N6DJI

5 5

[chirp_users] Locking the radio's
by Eric Chopin 29 Nov '16

29 Nov '16

Greetings, Is there anyway of locking (ie P.W. protecting) a radio's that I have programmed with CHIRP so that no one other than me, can alter the settings even if they use a PC and CHIRP? The radios thatI am interested in locking are Baofeng UV 5....GT3....TYT....etc Thanks Eric VE7ECJ

1 0