- Users - lists.chirpmyradio.com

[chirp_users] Password issues and CW/SSB cross-mode issue
by David A. Behar 27 Mar '17

27 Mar '17

*Password issues.* I used the "lost password" feature to change my password... but I still can't log in with the new password. Any ideas? *Issue re Yaesu FT-857 and FT-857D.* I'm using a Yaesu FT-857D w/MARS mod, so I (successfully) use the FT-857 radio option. On a few channels I programmed the radio for split mode -- i.e., transmit on CW on a carrier about 2 KHz lower than the suppressed LSB carrier for the channel I'm receiving. CHIRP handles the frequency split, but I can't specify the mode split. Any ideas? David / K7DB

2 1

Re: [chirp_users] Bf-888s
by Nate Alvin 24 Mar '17

24 Mar '17

2nd question. I originally got it working on my very old personal laptop running Vista. I was able to save a cloning image to do the rest of the work radios. Today i got it operational on my work laptop (Windows 7). I read a radio and went to save the image for future use. Nothing happened when i clicked save or save as. I went to close the program intending to restart chirp and it asked if i wanted to save i said yes and the dialog box closed and chirp remained open. I have looked through the settings, but i am sure i am missing something. Thanks for any help ! On Mar 22, 2017 2:56 PM, "Nate Alvin" <mypersonalspamfilternc(a)gmail.com> wrote: It worked. Thank you! On Mar 22, 2017 11:19 AM, "Nate Alvin" <mypersonalspamfilternc(a)gmail.com> wrote: > Thank you sir. I was doing some reading up on that and printed > instructions to do it later. Much appreciated ! > > On Mar 22, 2017 11:17, "Jim Unroe" <rock.unroe(a)gmail.com> wrote: > >> If you are using a programming cable with a Prolific chip with Windows, >> then the auto installed driver is incompatible. You must downgrade it to >> v3.2.0.0. There are instructions on miklor.com >> >> On Mar 22, 2017 9:20 AM, "Nate Alvin" <mypersonalspamfilternc(a)gmail.com> >> wrote: >> >>> I am very new to radios and programming. I am trying to program a >>> BF-888S for my business using your software. The radio was purchased a >>> week ago along with Baofeng cable. I get an error message of "radio >>> refused to enter programming mode". I have tried all the Baofeng models >>> listed with similiar results on 2 different laptops. Any help wouldbe >>> appreciated. Thanks >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Jim at rock.unroe(a)gmail.com >>> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >>> id.danplanet.com >>> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to N.C. at mypersonalspamfilternc(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> >

2 3

[chirp_users] New Daily Build
by Build System 24 Mar '17

24 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170324 A list of the changes included in this build (since the last daily) follows: Changes for Build #471 [Tom Hayward <tom(a)tomh.us>] [THD72] Fix buggy memory initialization. #1611 Allows channels added by Chirp to transmit.

1 0

[chirp_users] New user advice please
by Phil Cooper 23 Mar '17

23 Mar '17

Hi all, Last year, I purchased a Baofeng UV-5R Plus and a programming lead with the intention of setting up the radio with Chirp. A long story cut short - the lead was one that contained a "dodgy" Prolific IC, so I recently purchased a CP2102 module, and replaced the USB part of the lead. The drivers loaded correctly, and I have set the Com port. But, try as I might, all I get is "Radio failed to respond" from Chirp. My guess is that I am doing something wrong. So, what is the secret? Chirp help says to choose a quiet frequency, but makes no mention of whether the squelch should be open, fully closed, partly closed or what. Do you connect the radio to the lead, turn it on, and then click the OK button when prompted to do so? Or do you leave the radio off, and only turn it on when prompted? Also, I don't see the UV-5R Plus listed. I have tried using UV-5R as the model, and also tried using BF-F8HP, but I get the same result from both. So, what am I doing wrong? Best 73 Phil GU0SUP --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

7 13

[chirp_users] Ftdx5000
by John Wayman 23 Mar '17

23 Mar '17

Hello, I know it isn't on the list, but is it possible to program the FTdx5000 using chirp? I wondered whether the useless 60m channels applied could be re-programmed to be multi mode, and maybe even a few more channels could be programmed. Any ideas? Thanks John G4DRS

1 0

[chirp_users] programing baofeng 82c
by Joe Bryan 23 Mar '17

23 Mar '17

1. When programming simplex frequencies or 2 meter frequencies on chirp when you type in the frequencies and then go to the set-up pages, are you changing parameters for only the frequencies you typed in or are you overriding all previous set-ups?

2 1

Re: [chirp_users] New user advice please
by Simon Rodda 22 Mar '17

22 Mar '17

Hi Phil, Stick with it; chirp is really great once it's up and running. Now, you said that you reversed txd and rxd, then your pc powered off ?? That's unusual. You sure that's what you did? I've done some crazy stuff in my time, but never has a pc powered off if TX and RX were reversed. Cheers, Simon R, G4PEM On 22 Mar 2017 17:49, "pcooper(a)suremail.gg" <pcooper(a)suremail.gg> wrote: Hi Jim and the group, I already tried reversing the TXD and RXD lines in the PCB, but when I plugged the cable into the radio, the PC immediately switched off, which makes me think that was wrong! I have correctly chosen the right COM port (Com12 in my case), and I have almost completely removed the surrounding plastic from the radio end of the cable so that it is a better fit. I have also buzzed out each line from plug to PCB, and all is good there. I am happy with the soldering, as that is what I do for employment. When i changed to the CP2102 board, then connected it to my PC, Windows found the drivers automatically - although it wasn't quick - and a red LED is lit on the CP2102 PCB. However, when I open Chirp and try to download the radio, neither of the two led's associated with TXD and RXD lights up. Although this is a UV-5R Plus, do I still use the UV-5R option, or should I be using the BF-F8HP as the model? The Miklor site implies the latter, but reading the Chirp FAQ's implies that the UV-5R Plus is now grouped into the UV-5R models. Oh well, plan B it is then - get 3 wires and one each of 3.5mm and 2.5mm stereo jacks! 73 de Phil GU0SUP _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

1 0

[chirp_users] Bf-888s
by Nate Alvin 22 Mar '17

22 Mar '17

I am very new to radios and programming. I am trying to program a BF-888S for my business using your software. The radio was purchased a week ago along with Baofeng cable. I get an error message of "radio refused to enter programming mode". I have tried all the Baofeng models listed with similiar results on 2 different laptops. Any help wouldbe appreciated. Thanks

2 3

[chirp_users] Deleting Chirp completely
by Mike Kartchner 21 Mar '17

21 Mar '17

Can any one tell me how to delet chrip completly. So I can reinstall it All so It is not letting me save any thing when one I hit the save function

6 10

[chirp_users] New Daily Build
by Build System 21 Mar '17

21 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170321 A list of the changes included in this build (since the last daily) follows: Changes for Build #470 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-25X2] Add Support for new BTech Color Display Mobile Radios This patch modifies the btech.py driver to support additional mobile radios that have an OLED color display. Additional radio models supported: BTech UV-25X4 (quad band) BTech UV-25X2 (dual band) BTech UV-50X2 (dual band) New Model #4269

1 0