- Users - lists.chirpmyradio.com

[chirp_users] IC-92AD Band edge issues
by Chuck Hast 07 Jul '18

07 Jul '18

I am still getting a lot of errors when I try to work with my IC-92AD. Has this radio been abandoned? Wenlock and I both have observed the same sort of errors, but we are not sure what needs to be done. If the radio is abandoned perhaps it should be taken off of the supported list. If someone can give us some guidance as to where to poke we can try to do as much as possible. But at this point I for sure do not know much more than what Wenlock has ob- served it appears to be an issue with the The present machine running Ubuntu Mate 18.04 CPU i7 Memory 16G As I recall this was one of the first radios Chirp was aimed at. I know that it is not spring chicken but sure would like to see Chirp handle it like it used to. -- Chirp + Editcp + MD380Tools on Linux Celestial!!! Chuck -- KP4DJT

1 0

Re: [chirp_users] chirp_users Digest, Vol 115, Issue 4
by Brian Burke 06 Jul '18

06 Jul '18

Apologies for the redundant mess I created. bb/AF8WX

1 0

Re: [chirp_users] BF-H8FP programming
by wcurlew＠juno.com 05 Jul '18

05 Jul '18

Mine works just fine, but it picked the wrong port the first time out. Bil ---------- Original Message ---------- From: Jack Wimberly <wimberly.jack(a)gmail.com> To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] BF-H8FP programming Date: Thu, 5 Jul 2018 10:52:28 -0500 Does anyone have experience programing this radio using the USB cable supplied with it? My biggest problem is that the software is looking for a com port connection. Is there any work around for this? Thanks. _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bill Curlew at wcurlew(a)juno.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com ____________________________________________________________ America on Verge of Third Power Shift tracking.legacyoffers.com http://thirdpartyoffers.juno.com/TGL3131/5b3eb42045eee341f7ffbst01vuc

2 1

Re: [chirp_users] chirp_users Digest, Vol 115, Issue 3
by Brian Burke 05 Jul '18

05 Jul '18

Will chirp connect to and program commercial Kenwood TK-805 radios? I have several and always screw up the microphone programming method. On Thu, Jul 5, 2018, 15:05 <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 115, Issue 2 (Brian Burke) > 2. Re: Chirp began ten years ago today... (mike-2007(a)elp.rr.com) > 3. Re: IC-92AD funnies (Chuck Hast) > 4. Re: Chirp began ten years ago today... (Eric Oyen) > 5. Re: IC-92AD funnies (Chuck Hast) > 6. Re: IC-92AD funnies (Chuck Hast) > 7. Re: chirp_users Digest, Vol 115, Issue 2 (Dennis Wage) > 8. Re: IC-92AD funnies (Wenlock Burton) > 9. Re: IC-92AD funnies (Chuck Hast) > 10. Re: IC-92AD funnies (Chuck Hast) > 11. Re: IC-92AD funnies (Wenlock Burton) > 12. Re: IC-92AD funnies (Chuck Hast) > 13. Using Win 10 with Chirp? (Michael Pludek) > 14. Re: Using Win 10 with Chirp? (Jardy) > 15. Re: Using Win 10 with Chirp? (Jim Unroe) > 16. BF-H8FP programming (Jack Wimberly) > 17. Re: BF-H8FP programming (Trevor Holyoak) > 18. Re: BF-H8FP programming (Jim Unroe) > 19. Re: BF-H8FP programming (Chance Fulton) > 20. Re: BF-H8FP programming (Dennis Wage) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 4 Jul 2018 15:13:56 -0400 > From: Brian Burke <burke.n0imd(a)gmail.com> > Subject: Re: [chirp_users] chirp_users Digest, Vol 115, Issue 2 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CAL8isAh6= > M_9qLWVKXjed9EsbhOJH9tyapV3ApTA0kqZXkkikw(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Any chance this software will work with a commercial Kenwood TK-805? > > On Wed, Jul 4, 2018, 15:05 <chirp_users-request(a)intrepid.danplanet.com> > wrote: > > > Send chirp_users mailing list submissions to > > chirp_users(a)intrepid.danplanet.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > or, via email, send a message with subject or body 'help' to > > chirp_users-request(a)intrepid.danplanet.com > > > > You can reach the person managing the list at > > chirp_users-owner(a)intrepid.danplanet.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of chirp_users digest..." > > > > > > Today's Topics: > > > > 1. Re: CSV Partial Load (Jean-Paul Louis) > > 2. Re: CSV Partial Load (Aubrey Turner) > > 3. Re: CSV Partial Load (Ken FitzGerald-Smith) > > 4. Re: CSV Partial Load (Jim Unroe) > > 5. Re: CSV Partial Load (Jim Unroe) > > 6. Re: Chirp began ten years ago today... (W. T. Jones) > > 7. Re: CSV Partial Load (Nigel A. Gunn G8IFF/W8IFF) > > 8. fail programming a Jetstream JT270M (Patricia Wilson) > > 9. Re: fail programming a Jetstream JT270M (Jim Unroe) > > 10. Re: fail programming a Jetstream JT270M (Patricia Wilson) > > 11. Re: CSV Partial Load (Dennis Wage) > > 12. Re: Chirp began ten years ago today... (Chuck Hast) > > 13. Re: Chirp began ten years ago today... (mike-2007(a)elp.rr.com) > > 14. Re: Chirp began ten years ago today... (Dennis Wage) > > 15. How to empty or null tone channel in Chirp? > > (survivor(a)cryptolab.net) > > 16. Re: How to empty or null tone channel in Chirp? (Dennis Wage) > > 17. Re: How to empty or null tone channel in Chirp? (neil b) > > 18. Re: How to empty or null tone channel in Chirp? (Dennis Wage) > > 19. Re: How to empty or null tone channel in Chirp? (Jim Unroe) > > 20. Re: How to empty or null tone channel in Chirp? (Dennis Wage) > > 21. IC-92AD funnies (Chuck Hast) > > 22. Re: IC-92AD funnies (Chuck Hast) > > 23. Re: Chirp began ten years ago today... (BobJ) > > 24. Re: Chirp began ten years ago today... (Dennis Wage) > > 25. Re: Chirp began ten years ago today... (Glenn Ervin) > > 26. Re: Chirp began ten years ago today... > > (Nigel A. Gunn G8IFF/W8IFF) > > 27. Re: Chirp began ten years ago today... (Chuck Hast) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Tue, 3 Jul 2018 15:02:06 -0400 > > From: Jean-Paul Louis <louijp(a)yahoo.com> > > Subject: Re: [chirp_users] CSV Partial Load > > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > > Message-ID: <0BE7A004-925C-4FE2-9218-364F1C569DC5(a)yahoo.com> > > Content-Type: text/plain; charset=utf-8 > > > > I think that you have a problem with the NAMES of the channels. NAMES > > should not have a space as this break the rules of CSV files. > > Try replacing the spaces with ?_? and that might work a lot better. > > > > Just my $0.02, > > Jean-Paul > > N1JPL > > > > > > > On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis(a)gmail.com> wrote: > > > > > > I just trimmed off all the punctuation spaces and made names 8 > > characters or less. Same problem, it imports and shows channels 0-34 > fine > > but stops at 34 with errors: > > > > > > Line 35: [rtone] could not convert string to float: > > > > > > Line 36: [rtone] could not convert string to float: > > > > > > Line 37: [rtone] could not convert string to float: > > > > > > Line 38: [rtone] could not convert string to float: > > > ... > > > > > > to the end of the list just after channel 70cm Cal: > > > > > > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,, > > > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,, > > > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,, > > > > > > Something is happening here between 33 and 34. > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users(a)intrepid.danplanet.com > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Jean-Paul Louis at louijp(a)yahoo.com > > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > > > > > ------------------------------ > > > > Message: 2 > > Date: Tue, 3 Jul 2018 14:14:38 -0500 > > From: Aubrey Turner <aubrey.c.turner(a)gmail.com> > > Subject: Re: [chirp_users] CSV Partial Load > > To: chirp_users(a)intrepid.danplanet.com > > Message-ID: <d1ef62fc-1577-2d63-54aa-81ca27a15c02(a)gmail.com> > > Content-Type: text/plain; charset=utf-8; format=flowed > > > > Actually, spaces are allowed in CSVs (in general just about everything > > other than a COMMA is fine since it's the comma that separates the > > fields).? And, we see that line 33 is loading (which also has a space). > > > > What I am seeing, however, is a lot more empty fields in line 34 than in > > the previous lines.? In particular, the warning from Chirp is for the > > 'rtone' column that it can't convert the string to a float.? In line 33 > > this appears to have a value of 88.5 while it's empty on line 34.? I > > suggest looking at the values for the tone columns to see why these are > > blank (and/or why Chirp is expecting a value there). > > > > I also see from the history of this email chain that? you're using Excel > > to edit the CSV.? Excel is notorious for munging CSV files. You may want > > to use a text editor of some kind instead of Excel to make sure that the > > fields aren't getting messed up when the file is saved. > > > > > > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote: > > > I think that you have a problem with the NAMES of the channels. NAMES > > should not have a space as this break the rules of CSV files. > > > Try replacing the spaces with ?_? and that might work a lot better. > > > > > > Just my $0.02, > > > Jean-Paul > > > N1JPL > > > > > > > > >> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis(a)gmail.com> wrote: > > >> > > >> I just trimmed off all the punctuation spaces and made names 8 > > characters or less. Same problem, it imports and shows channels 0-34 > fine > > but stops at 34 with errors: > > >> > > >> Line 35: [rtone] could not convert string to float: > > >> > > >> Line 36: [rtone] could not convert string to float: > > >> > > >> Line 37: [rtone] could not convert string to float: > > >> > > >> Line 38: [rtone] could not convert string to float: > > >> ... > > >> > > >> to the end of the list just after channel 70cm Cal: > > >> > > >> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > >> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > >> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > >> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,, > > >> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,, > > >> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,, > > >> > > >> Something is happening here between 33 and 34. > > >> _______________________________________________ > > >> chirp_users mailing list > > >> chirp_users(a)intrepid.danplanet.com > > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > >> This message was sent to Jean-Paul Louis at louijp(a)yahoo.com > > >> To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users(a)intrepid.danplanet.com > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > This message was sent to Aubrey Turner at aubrey.c.turner(a)gmail.com > > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > > > > > ------------------------------ > > > > Message: 3 > > Date: Tue, 3 Jul 2018 20:45:05 +0100 > > From: Ken FitzGerald-Smith <ei7dkb(a)logicatrium.com> > > Subject: Re: [chirp_users] CSV Partial Load > > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > > Message-ID: <36A3E9FC-E5A6-4A73-A05B-D53EBA681348(a)logicatrium.com> > > Content-Type: text/plain; charset="utf-8" > > > > He needs values for all these fields in your csv file: rToneFreq, > > cToneFreq, DtcsCode, DtcsPolarity, Mode, TStep > > > > rToneFreq & cToneFreq need to be proper ctcss tones. 67.0 will do > > > > DtcsCode needs to be valid too. First valid code is 023 > > > > DtcsPolarity needs to be one of [?NN', 'NR', 'RN', 'RR'] > > > > Mode needs to be AM or FM at least > > > > TStep (tuning step) needs to be numeric! Zero will do > > > > So this: > > > > 35,BECKER1/AGAVE,153.62,,0,,,,,,FM,,,,,,, > > > > Needs to become this at a minimum: > > > > 35,BECKER1/AGAVE,153.62,,0,,67.0,67.0,023,NN,FM,12.5,,,,,, > > > > There is no problem with the / in the name, but remember if you see a > > conversion error like ?String to Float? for any field, that indicates > that > > you must supply at least a numeric value, not an empty field. > > > > I hope this helps > > > > Ken > > > > > On 3 Jul 2018, at 20:14, Aubrey Turner <aubrey.c.turner(a)gmail.com> > > wrote: > > > > > > Actually, spaces are allowed in CSVs (in general just about everything > > > other than a COMMA is fine since it's the comma that separates the > > > fields). And, we see that line 33 is loading (which also has a space). > > > > > > What I am seeing, however, is a lot more empty fields in line 34 than > in > > > the previous lines. In particular, the warning from Chirp is for the > > > 'rtone' column that it can't convert the string to a float. In line 33 > > > this appears to have a value of 88.5 while it's empty on line 34. I > > > suggest looking at the values for the tone columns to see why these are > > > blank (and/or why Chirp is expecting a value there). > > > > > > I also see from the history of this email chain that you're using > Excel > > > to edit the CSV. Excel is notorious for munging CSV files. You may > want > > > to use a text editor of some kind instead of Excel to make sure that > the > > > fields aren't getting messed up when the file is saved. > > > > > > > > > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote: > > >> I think that you have a problem with the NAMES of the channels. NAMES > > should not have a space as this break the rules of CSV files. > > >> Try replacing the spaces with ?_? and that might work a lot better. > > >> > > >> Just my $0.02, > > >> Jean-Paul > > >> N1JPL > > >> > > >> > > >>> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis(a)gmail.com> wrote: > > >>> > > >>> I just trimmed off all the punctuation spaces and made names 8 > > characters or less. Same problem, it imports and shows channels 0-34 > fine > > but stops at 34 with errors: > > >>> > > >>> Line 35: [rtone] could not convert string to float: > > >>> > > >>> Line 36: [rtone] could not convert string to float: > > >>> > > >>> Line 37: [rtone] could not convert string to float: > > >>> > > >>> Line 38: [rtone] could not convert string to float: > > >>> ... > > >>> > > >>> to the end of the list just after channel 70cm Cal: > > >>> > > >>> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > >>> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > >>> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > >>> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,, > > >>> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,, > > >>> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,, > > >>> > > >>> Something is happening here between 33 and 34. > > >>> _______________________________________________ > > >>> chirp_users mailing list > > >>> chirp_users(a)intrepid.danplanet.com > > >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > >>> This message was sent to Jean-Paul Louis at louijp(a)yahoo.com > > >>> To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > >> _______________________________________________ > > >> chirp_users mailing list > > >> chirp_users(a)intrepid.danplanet.com > > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > >> This message was sent to Aubrey Turner at aubrey.c.turner(a)gmail.com > > <mailto:aubrey.c.turner@gmail.com> > > >> To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto: > > chirp_users-unsubscribe(a)intrepid.danplanet.com> > > > > > > _______________________________________________ > > > chirp_users mailing list > > > chirp_users(a)intrepid.danplanet.com <mailto: > > chirp_users(a)intrepid.danplanet.com> > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users < > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > > > This message was sent to Bitfarmer at ei7dkb(a)logicatrium.com <mailto: > > ei7dkb(a)logicatrium.com> > > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto: > > chirp_users-unsubscribe(a)intrepid.danplanet.com> > >

2 1

[chirp_users] BF-H8FP programming
by Jack Wimberly 05 Jul '18

05 Jul '18

Does anyone have experience programing this radio using the USB cable supplied with it? My biggest problem is that the software is looking for a com port connection. Is there any work around for this? Thanks.

5 4

[chirp_users] Using Win 10 with Chirp?
by Michael Pludek 05 Jul '18

05 Jul '18

Is there an update to allow me to use chirp with win 10 as I do not seem to be able to use it otherwise. Mike Pludek. G0EQG/UK

3 2

[chirp_users] IC-92AD funnies
by Chuck Hast 04 Jul '18

04 Jul '18

Folks, Decided that I would go through my 92AD, remove a few frequencies I do not use, add some and add my hotspot so I can try DStar on a hot spot. See a lot of strange things like reading 849 memories (should only go to 799) and one or other bank screens blank. Looked at the bug reports and see all off what I see (Thank you Winlock) so just out of a whim I look at the date of the code, says 20170714. I see that the latest and greatest 20180623. I have the snapshots ppa enabled but for some reason it is not pulling down the latest and greatest. Any ideas? I am running Ubunut Mate 18.04 -- Chirp + Editcp + MD380Tools on Linux Celestial!!! Chuck -- KP4DJT

2 9

Re: [chirp_users] chirp_users Digest, Vol 115, Issue 2
by Brian Burke 04 Jul '18

04 Jul '18

Any chance this software will work with a commercial Kenwood TK-805? On Wed, Jul 4, 2018, 15:05 <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: CSV Partial Load (Jean-Paul Louis) > 2. Re: CSV Partial Load (Aubrey Turner) > 3. Re: CSV Partial Load (Ken FitzGerald-Smith) > 4. Re: CSV Partial Load (Jim Unroe) > 5. Re: CSV Partial Load (Jim Unroe) > 6. Re: Chirp began ten years ago today... (W. T. Jones) > 7. Re: CSV Partial Load (Nigel A. Gunn G8IFF/W8IFF) > 8. fail programming a Jetstream JT270M (Patricia Wilson) > 9. Re: fail programming a Jetstream JT270M (Jim Unroe) > 10. Re: fail programming a Jetstream JT270M (Patricia Wilson) > 11. Re: CSV Partial Load (Dennis Wage) > 12. Re: Chirp began ten years ago today... (Chuck Hast) > 13. Re: Chirp began ten years ago today... (mike-2007(a)elp.rr.com) > 14. Re: Chirp began ten years ago today... (Dennis Wage) > 15. How to empty or null tone channel in Chirp? > (survivor(a)cryptolab.net) > 16. Re: How to empty or null tone channel in Chirp? (Dennis Wage) > 17. Re: How to empty or null tone channel in Chirp? (neil b) > 18. Re: How to empty or null tone channel in Chirp? (Dennis Wage) > 19. Re: How to empty or null tone channel in Chirp? (Jim Unroe) > 20. Re: How to empty or null tone channel in Chirp? (Dennis Wage) > 21. IC-92AD funnies (Chuck Hast) > 22. Re: IC-92AD funnies (Chuck Hast) > 23. Re: Chirp began ten years ago today... (BobJ) > 24. Re: Chirp began ten years ago today... (Dennis Wage) > 25. Re: Chirp began ten years ago today... (Glenn Ervin) > 26. Re: Chirp began ten years ago today... > (Nigel A. Gunn G8IFF/W8IFF) > 27. Re: Chirp began ten years ago today... (Chuck Hast) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 3 Jul 2018 15:02:06 -0400 > From: Jean-Paul Louis <louijp(a)yahoo.com> > Subject: Re: [chirp_users] CSV Partial Load > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: <0BE7A004-925C-4FE2-9218-364F1C569DC5(a)yahoo.com> > Content-Type: text/plain; charset=utf-8 > > I think that you have a problem with the NAMES of the channels. NAMES > should not have a space as this break the rules of CSV files. > Try replacing the spaces with ?_? and that might work a lot better. > > Just my $0.02, > Jean-Paul > N1JPL > > > > On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis(a)gmail.com> wrote: > > > > I just trimmed off all the punctuation spaces and made names 8 > characters or less. Same problem, it imports and shows channels 0-34 fine > but stops at 34 with errors: > > > > Line 35: [rtone] could not convert string to float: > > > > Line 36: [rtone] could not convert string to float: > > > > Line 37: [rtone] could not convert string to float: > > > > Line 38: [rtone] could not convert string to float: > > ... > > > > to the end of the list just after channel 70cm Cal: > > > > 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,, > > 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,, > > 35,BECKER1,153.62,,0,,,,,,FM,,,,,,, > > 36,BECKER2,153.245,,0,,,,,,FM,,,,,,, > > > > Something is happening here between 33 and 34. > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Jean-Paul Louis at louijp(a)yahoo.com > > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > ------------------------------ > > Message: 2 > Date: Tue, 3 Jul 2018 14:14:38 -0500 > From: Aubrey Turner <aubrey.c.turner(a)gmail.com> > Subject: Re: [chirp_users] CSV Partial Load > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <d1ef62fc-1577-2d63-54aa-81ca27a15c02(a)gmail.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > Actually, spaces are allowed in CSVs (in general just about everything > other than a COMMA is fine since it's the comma that separates the > fields).? And, we see that line 33 is loading (which also has a space). > > What I am seeing, however, is a lot more empty fields in line 34 than in > the previous lines.? In particular, the warning from Chirp is for the > 'rtone' column that it can't convert the string to a float.? In line 33 > this appears to have a value of 88.5 while it's empty on line 34.? I > suggest looking at the values for the tone columns to see why these are > blank (and/or why Chirp is expecting a value there). > > I also see from the history of this email chain that? you're using Excel > to edit the CSV.? Excel is notorious for munging CSV files. You may want > to use a text editor of some kind instead of Excel to make sure that the > fields aren't getting messed up when the file is saved. > > > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote: > > I think that you have a problem with the NAMES of the channels. NAMES > should not have a space as this break the rules of CSV files. > > Try replacing the spaces with ?_? and that might work a lot better. > > > > Just my $0.02, > > Jean-Paul > > N1JPL > > > > > >> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis(a)gmail.com> wrote: > >> > >> I just trimmed off all the punctuation spaces and made names 8 > characters or less. Same problem, it imports and shows channels 0-34 fine > but stops at 34 with errors: > >> > >> Line 35: [rtone] could not convert string to float: > >> > >> Line 36: [rtone] could not convert string to float: > >> > >> Line 37: [rtone] could not convert string to float: > >> > >> Line 38: [rtone] could not convert string to float: > >> ... > >> > >> to the end of the list just after channel 70cm Cal: > >> > >> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,, > >> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,, > >> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,, > >> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,, > >> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,, > >> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,, > >> > >> Something is happening here between 33 and 34. > >> _______________________________________________ > >> chirp_users mailing list > >> chirp_users(a)intrepid.danplanet.com > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > >> This message was sent to Jean-Paul Louis at louijp(a)yahoo.com > >> To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Aubrey Turner at aubrey.c.turner(a)gmail.com > > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > ------------------------------ > > Message: 3 > Date: Tue, 3 Jul 2018 20:45:05 +0100 > From: Ken FitzGerald-Smith <ei7dkb(a)logicatrium.com> > Subject: Re: [chirp_users] CSV Partial Load > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: <36A3E9FC-E5A6-4A73-A05B-D53EBA681348(a)logicatrium.com> > Content-Type: text/plain; charset="utf-8" > > He needs values for all these fields in your csv file: rToneFreq, > cToneFreq, DtcsCode, DtcsPolarity, Mode, TStep > > rToneFreq & cToneFreq need to be proper ctcss tones. 67.0 will do > > DtcsCode needs to be valid too. First valid code is 023 > > DtcsPolarity needs to be one of [?NN', 'NR', 'RN', 'RR'] > > Mode needs to be AM or FM at least > > TStep (tuning step) needs to be numeric! Zero will do > > So this: > > 35,BECKER1/AGAVE,153.62,,0,,,,,,FM,,,,,,, > > Needs to become this at a minimum: > > 35,BECKER1/AGAVE,153.62,,0,,67.0,67.0,023,NN,FM,12.5,,,,,, > > There is no problem with the / in the name, but remember if you see a > conversion error like ?String to Float? for any field, that indicates that > you must supply at least a numeric value, not an empty field. > > I hope this helps > > Ken > > > On 3 Jul 2018, at 20:14, Aubrey Turner <aubrey.c.turner(a)gmail.com> > wrote: > > > > Actually, spaces are allowed in CSVs (in general just about everything > > other than a COMMA is fine since it's the comma that separates the > > fields). And, we see that line 33 is loading (which also has a space). > > > > What I am seeing, however, is a lot more empty fields in line 34 than in > > the previous lines. In particular, the warning from Chirp is for the > > 'rtone' column that it can't convert the string to a float. In line 33 > > this appears to have a value of 88.5 while it's empty on line 34. I > > suggest looking at the values for the tone columns to see why these are > > blank (and/or why Chirp is expecting a value there). > > > > I also see from the history of this email chain that you're using Excel > > to edit the CSV. Excel is notorious for munging CSV files. You may want > > to use a text editor of some kind instead of Excel to make sure that the > > fields aren't getting messed up when the file is saved. > > > > > > On 7/3/2018 2:02 PM, Jean-Paul Louis via chirp_users wrote: > >> I think that you have a problem with the NAMES of the channels. NAMES > should not have a space as this break the rules of CSV files. > >> Try replacing the spaces with ?_? and that might work a lot better. > >> > >> Just my $0.02, > >> Jean-Paul > >> N1JPL > >> > >> > >>> On Jul 3, 2018, at 2:50 PM, imatglamis <imatglamis(a)gmail.com> wrote: > >>> > >>> I just trimmed off all the punctuation spaces and made names 8 > characters or less. Same problem, it imports and shows channels 0-34 fine > but stops at 34 with errors: > >>> > >>> Line 35: [rtone] could not convert string to float: > >>> > >>> Line 36: [rtone] could not convert string to float: > >>> > >>> Line 37: [rtone] could not convert string to float: > >>> > >>> Line 38: [rtone] could not convert string to float: > >>> ... > >>> > >>> to the end of the list just after channel 70cm Cal: > >>> > >>> 31,WX9,161.775,,0,,88.5,88.5,23,NN,FM,5,,,,,, > >>> 32,WX10,163.275,,0,,88.5,88.5,23,NN,FM,5,,,,,, > >>> 33,70cm Cal,446,,0,,88.5,88.5,23,NN,FM,5,,,,,, > >>> 34,BAJA PIT,154.98,,0,,,,,,FM,,,,,,, > >>> 35,BECKER1,153.62,,0,,,,,,FM,,,,,,, > >>> 36,BECKER2,153.245,,0,,,,,,FM,,,,,,, > >>> > >>> Something is happening here between 33 and 34. > >>> _______________________________________________ > >>> chirp_users mailing list > >>> chirp_users(a)intrepid.danplanet.com > >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > >>> This message was sent to Jean-Paul Louis at louijp(a)yahoo.com > >>> To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > >> _______________________________________________ > >> chirp_users mailing list > >> chirp_users(a)intrepid.danplanet.com > >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users > >> This message was sent to Aubrey Turner at aubrey.c.turner(a)gmail.com > <mailto:aubrey.c.turner@gmail.com> > >> To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto: > chirp_users-unsubscribe(a)intrepid.danplanet.com> > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com <mailto: > chirp_users(a)intrepid.danplanet.com> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users < > http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > > This message was sent to Bitfarmer at ei7dkb(a)logicatrium.com <mailto: > ei7dkb(a)logicatrium.com> > > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto: > chirp_users-unsubscribe(a)intrepid.danplanet.com> >

2 1

Re: [chirp_users] Chirp began ten years ago today...
by Glenn Ervin 04 Jul '18

04 Jul '18

You are incorrect.You may use Linux and it is fully accessible with the Orca screenreader.You don't need to learn a new operating system, Linux is more like Windows 7 than Windows 10 is.You can even get an ISO image to burn to DVD that boots up talking with Chirp ready to go.I don't use that, so others might be able to inform you on where to get it.I install Chirp onto Ubuntu 16.04 and use Orca.Glenn ----- Original Message -----From: BobJTo: Discussion of CHIRPSent: Wednesday, July 04, 2018 9:34 AMSubject: Re: [chirp_users] Chirp began ten years ago today... As far as I know, after ten years, Chirp is still not accessible by blind hams who must use screen-reading software. If I am wrong about that, please let me know, otherwise, I'll withhold my praise until Chirp becomes accessible by blind hams. 73 Bob AD8RJ From: Chuck HastSent: Wednesday, July 04, 2018 12:51 AMTo: Discussion of CHIRPSubject: Re: [chirp_users] Chirp began ten years ago today... Dan,First a big hat off to you and all on that list for the great work and piece of art.It is funny, I was working in Kalama WA in a newly opened glass plant, the company thatI worked for had sold them the fore hearths and glass container inspection machines. Myjob was to bring those machines on line and then train and shepherd those folks in theinspections of the bottles. I had tons of overtime so I toddled down to HRO in PDX andgot me a 92AT. That was I think in late Aug 2008 or Sept. I know it had not started rainingyet and the weather was still good. It was one of the folks at HRO that aimed me yourdirection I believe it was. I did not know that the project was that new. I do not rememberwhen I downloaded the first code, but it worked on that 92AT (I still have it). By way I now live in Oklahoma, but I sure miss the NW... Looks like I joined the list on 20 Jun 2009. On Tue, Jul 3, 2018 at 5:53 PM W. T. Jones <wn3lif(a)gmail.com> wrote:Thanks to All that made Chirp possible! Never knew there were so many. Regards, WTReal heroes do not wear capes. They wear dog tags, turnout gear, and badges! On Tue, Jul 3, 2018 at 2:50 PM, John La <Johnla(a)usa.net>wrote: Thank you to Team CHIRP. An invaluable service to the Amateur Radio community. John ‘Miklor’ K3NXU http://www.miklor.comhttp://www.miklor.com/DMR/ From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Barry K Sent: Tuesday, July 3, 2018 2:32 PMTo: Discussion of CHIRP Subject: Re: [chirp_users] Chirp began ten years ago today... yes this program has saved a lot of hoursthanks for it Barry aka N2NVP, Pass-Pres GCARC, retired Vol Lt 884, CERT, SKYWARN 128A From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of Norman Sebern <nsebern14(a)gmail.com> Sent: Tuesday, July 3, 2018 10:38 AM To: Discussion of CHIRP Subject: Re: [chirp_users] Chirp began ten years ago today... Thank YOU. On Tue, Jul 3, 2018, 7:32 AM Frank <k1hlz(a)pcicon.net> wrote:Congratulations on reaching your 10 year milestone with such a great piece of software! As a fairly new Ham, it's made my life a lot easier. Thank you! 73s Frank K1HLZOn July 3, 2018 9:24:44 AM EDT, Dan Smith <dsmith(a)danplanet.com> wrote: Hi all, I just wanted to share a milestone in the CHIRP project with the community. Ten years ago today, on July 3rd 2008, I made the first commit to the repository which started the chirp project: https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb It was just a rough bit of code that could talk to an Icom IC-92AD and I was apparently thinking of calling it "repidr". I do not recall what that was supposed to stand for, but by July 16th I had renamed it to CHIRP: https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b By July 19th, I was ready to make something available, which was just able to read and write CSV files, and talk to Icom IC-9x radios and the ID-800H. This was the first version 0.1.1: https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7 I still remember the large stack of paper on the corner of my desk where I had written out tons of hex, all in pencil, erased and re-written many times, trying to decode the first few radio memories and looking for patterns to make it easier. The project has come a long way since then, largely due to the help and involvement of other volunteers and users. While the first release supported two radio models, the latest one supports 228 distinct models, with more if you count the many clones that exist. The users mailing list has a fairly amazing 2892 people subscribed, from all over the world, representing a tiny fraction of the total user base. So, I just want to thank all the people who have made CHIRP possible and successful. Especially contributors of code, bug reports, and test reports, but also people who have spent hours on this list helping others and being the support system that allows volunteer developers to focus on what they do best. Thanks to anyone who has ever sent a donation, as well as the commercial outfits who have contributed radios and other help. There are too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few that come to mind as having a substantial impact. At the end of this email is a very rough list of all the code contributors to the project, extracted from the repository with minimal attempts to squash some duplicates. These are the rock stars that have gotten us to where we are today, so please join me in thanking them for spending their nights and weekends making this project the success that it is today! --Dan Commits Contributor -------| 1865 Dan Smith 240 Jim Unroe 189 Tom Hayward 188 Marco Filippi 137 Zach Welch 59 Jens Jensen 58 Pavel Milanes (CO7WT) 26 K. Arvanitis 15 Tyler Tidman 12 Richard Cochran 10 Dan Drogichen 8 Sean Burford 8 Rick Farina 8 Michael Wagner 8 Eric Allen 8 Brian Dickman 7 SASANO Takayoshi 6 Vernon Mauery 6 Ron Wellsted 6 Rhett Robinson 6 Ray Cielencki 5 Rick DeWitt 5 Keith Williamson 4 Tim Smith 4 Nicolas Pike 4 Mathias Weyland 4 IT2 Stuart Blake Tener, USNR (N3GWG) 4 David Griffith 4 Chris Fosnight 4 Angus Ainslie 4 Alexey K 3 Rick Farina 3 Leo Bärring 3 Jon K Hellan 3 Christopher Hoover 3 Ben Smith 2 Richard Birch 2 Nathan Crapo 2 Michal Demin 2 Louie Ilievski 2 Johan Adler 2 Dean Gibson 2 Cody P Schafer 1 Windsor Schmidt 1 Wade Simmons 1 Stuart Tener 1 Steve Conklin 1 Ryan Tourge K2RRT x 1 Robert Terzi 1 Robert Morris 1 Patrik Nilsson 1 nytowl 1 Nolan Darilek 1 nicolas jon pike 1 Mike Pittaro 1 Michal D 1 Michael Lippold 1 Mark Adams 1 loudawgucr(a)gmail.com 1 Krystian SP6IT 1 kc1ckh(a)arrl.net 1 Jeremy McDermond 1 James Lee N1DDK 1 Imuli 1 Eric Dropps 1 Ed Santiago 1 Declan Rieb 1 David Fannin 1 Dave Allan 1 Dale Tyler 1 Charles Stewart 1 Brett Bump 1 Brad Ackerman 1 Attilio Pannella 1 Andrew 1 Adam Coddington 1 ac2lq 1 Aaron Pelly chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to FRANK G at k1hlz(a)pcicon.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com-- Sent from my Android device with K-9 Mail. Please excuse my brevity._______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Norman Sebern at nsebern14(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com_______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to WT at wn3lif(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com_______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com --Chirp + Editcp + MD380Tools on LinuxCelestial!!!Chuck -- KP4DJT _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to rjustice004(a)woh.rr.com at rjustice004(a)woh.rr.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] Chirp began ten years ago today...
by Dan Smith 04 Jul '18

04 Jul '18

Hi all, I just wanted to share a milestone in the CHIRP project with the community. Ten years ago today, on July 3rd 2008, I made the first commit to the repository which started the chirp project: https://chirp.danplanet.com/projects/chirp/repository/revisions/31cfb1a376fb It was just a rough bit of code that could talk to an Icom IC-92AD and I was apparently thinking of calling it "repidr". I do not recall what that was supposed to stand for, but by July 16th I had renamed it to CHIRP: https://chirp.danplanet.com/projects/chirp/repository/revisions/646c121a847b By July 19th, I was ready to make something available, which was just able to read and write CSV files, and talk to Icom IC-9x radios and the ID-800H. This was the first version 0.1.1: https://chirp.danplanet.com/projects/chirp/repository/revisions/1428729c41b7 I still remember the large stack of paper on the corner of my desk where I had written out tons of hex, all in pencil, erased and re-written many times, trying to decode the first few radio memories and looking for patterns to make it easier. The project has come a long way since then, largely due to the help and involvement of other volunteers and users. While the first release supported two radio models, the latest one supports 228 distinct models, with more if you count the many clones that exist. The users mailing list has a fairly amazing 2892 people subscribed, from all over the world, representing a tiny fraction of the total user base. So, I just want to thank all the people who have made CHIRP possible and successful. Especially contributors of code, bug reports, and test reports, but also people who have spent hours on this list helping others and being the support system that allows volunteer developers to focus on what they do best. Thanks to anyone who has ever sent a donation, as well as the commercial outfits who have contributed radios and other help. There are too many to name, but BaofengTech, BlueMax49ers, and Jetstream are a few that come to mind as having a substantial impact. At the end of this email is a very rough list of all the code contributors to the project, extracted from the repository with minimal attempts to squash some duplicates. These are the rock stars that have gotten us to where we are today, so please join me in thanking them for spending their nights and weekends making this project the success that it is today! --Dan Commits Contributor -------|-------------------------------------------------- 1865 Dan Smith 240 Jim Unroe 189 Tom Hayward 188 Marco Filippi 137 Zach Welch 59 Jens Jensen 58 Pavel Milanes (CO7WT) 26 K. Arvanitis 15 Tyler Tidman 12 Richard Cochran 10 Dan Drogichen 8 Sean Burford 8 Rick Farina 8 Michael Wagner 8 Eric Allen 8 Brian Dickman 7 SASANO Takayoshi 6 Vernon Mauery 6 Ron Wellsted 6 Rhett Robinson 6 Ray Cielencki 5 Rick DeWitt 5 Keith Williamson 4 Tim Smith 4 Nicolas Pike 4 Mathias Weyland 4 IT2 Stuart Blake Tener, USNR (N3GWG) 4 David Griffith 4 Chris Fosnight 4 Angus Ainslie 4 Alexey K 3 Rick Farina 3 Leo Bärring 3 Jon K Hellan 3 Christopher Hoover 3 Ben Smith 2 Richard Birch 2 Nathan Crapo 2 Michal Demin 2 Louie Ilievski 2 Johan Adler 2 Dean Gibson 2 Cody P Schafer 1 Windsor Schmidt 1 Wade Simmons 1 Stuart Tener 1 Steve Conklin 1 Ryan Tourge K2RRT x 1 Robert Terzi 1 Robert Morris 1 Patrik Nilsson 1 nytowl 1 Nolan Darilek 1 nicolas jon pike 1 Mike Pittaro 1 Michal D 1 Michael Lippold 1 Mark Adams 1 loudawgucr(a)gmail.com 1 Krystian SP6IT 1 kc1ckh(a)arrl.net 1 Jeremy McDermond 1 James Lee N1DDK 1 Imuli 1 Eric Dropps 1 Ed Santiago 1 Declan Rieb 1 David Fannin 1 Dave Allan 1 Dale Tyler 1 Charles Stewart 1 Brett Bump 1 Brad Ackerman 1 Attilio Pannella 1 Andrew 1 Adam Coddington 1 ac2lq 1 Aaron Pelly

11 13