- Users - lists.chirpmyradio.com

[chirp_users] _valid_tones
by Jim Unroe 16 Aug '23

16 Aug '23

Dan, I was just brought to my attention that the rb15.py driver has selections for tones in one Hz increments from 56.0 to 64.0 Hz. Doing some looking around I see that there is a "TONES_EXTRA" in chirp_common.py that matches these tones. It appears that the default tones have been changed from TONES to TONES + TONES_EXTRA. I don't know why this change was made, but now every radio I have tested, whether they support it or not, has these 10 additional tones appended to their list of tones. [image: TONES_EXTRA.png] Can this be changed back or do I need to make a plan to address this in the individual drivers for each of the affected radios? Jim

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 16 Aug '23

16 Aug '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: fa43f8f6 RB15/RB615: fix tone squelch issue - fixes #10790 6e7f8d42 retevis_rb15.py: Allow RB615 full band - fixes #10787 6066914f retevis_rb15.py: Allow RB15 full band - related to #10787 --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 14 Aug '23

14 Aug '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 8e6459f6 Fix style ef19fa4e Fix spelling ab80f8a9 mml_jc8810.py: Add Radtel RT-470X - fixes #10779 --

1 0

[chirp_users] Re: Developer mode browser has become R/O?
by Ron 10 Aug '23

10 Aug '23

I rolled back and forth between the latest build and chirp-next-20230601-installer.exe a couple times to verify that the problem is only in the newer build. > In the past I was able to change things in the developer mode browser to work around bugs but now it won't let me enter/change anything? >This happened after I recovered from a disk corruption and had to re-install CHIRP (possibly a newer build). Everything else works normally as before. >Thanks, >Ron

2 2

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 10 Aug '23

10 Aug '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 25cf76fa Add Powerful UV-S5 alias 9f66f8d3 ga510.py: Add Abbree AR-F5 - fixes #9575 --

2 1

[chirp_users] FTM-3100R
by Andy Zaayenga 10 Aug '23

10 Aug '23

Hi folks, I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to run with CHIRP. I downloaded the radio using the FTM-3200D R template as per the CHIRP home page. Downloading and uploading works fine. I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor that are covered by the FTM-3100R. Uploading those to the radio works fine and downloading shows them all in memory. However, I notice that when I scan all 63 frequencies the radio only scans the first 14. The display just stops on the 14th location while the numbers under MR keep counting up to 63. Then it cycles back to location 1. I have the radios side by side and the FT-60R scans all the locations while the FTM-3100R only the first 14. The specs say the radio has 199 memory locations which is consistent with the CHIRP img * 199 "basic" memory channels, numbered "1" through "199". But the CHIRP image doesn't show the home channel or any of the L or U locations. * A "Home" channel, providing storage and quick recall of one prime frequency. * 10 sets of band-edge memories, also known as "Programmable Memory Scan" channels, labeled "L0/U0" through "L9/U9". Does anyone out there have an FTM-3100R and can let me know if I'm doing something wrong? I'm wondering if there's some issue with the FTM-3200D R template WRT the FTM-3100R. Thanks from a first-time poster! 73 Andy Zaayenga KD2SME Yaesu FT-60R, Yaesu FTM-3100R

2 5

[chirp_users] Developer mode browser has become R/O?
by Ron 10 Aug '23

10 Aug '23

In the past I was able to change things in the developer mode browser to work around bugs but now it won't let me enter/change anything? This happened after I recovered from a disk corruption and had to re-install CHIRP (possibly a newer build). Everything else works normally as before. Thanks, Ron

1 0

Re: [chirp_users] FTM-3100R
by Andy Zaayenga 08 Aug '23

08 Aug '23

Sorry, Dick. That file is my CHIRP file, and I renamed it with a bak extension because most servers do not allow img files due to security protocol. As Danny points out, you can delete the .bak part to make it an img file that can be read into CHIRP. Tonight I installed the CHIRP Legacy edition and went through the same exercise. No difference from the current version. The operative question is – Does anyone on this list use CHIRP successfully for their Yaesu FTM-3100R? Then I would know if it’s something about my configuration or CHIRP itself. Thanks all. Andy From: Danny Siminiuk <danny(a)siminiuk.com> Sent: Monday, August 7, 2023 5:22 PM To: chirp users <chirp_users(a)intrepid.danplanet.com> Cc: peter.fontneau <peter.fontneau(a)icloud.com>; Andy Zaayenga <andy(a)zaayenga.net> Subject: Re: [chirp_users] FTM-3100R "I’ve attached the img file, renamed to a bak extension" Rename <https://z8.zimbrahostedemail.com/service/home/~/?auth=co&loc=en_US&id=13351…> Yaesu_FTM-3100R.img.bak to <https://z8.zimbrahostedemail.com/service/home/~/?auth=co&loc=en_US&id=13351…> Yaesu_FTM-3100R.img Get it? _____ From: "w4rss" <w4rss(a)radioclub.org <mailto:w4rss@radioclub.org> > To: "peter.fontneau" <peter.fontneau(a)icloud.com <mailto:peter.fontneau@icloud.com> >, "chirp users" <chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >, "Andy Zaayenga" <andy(a)zaayenga.net <mailto:andy@zaayenga.net> > Sent: Monday, August 7, 2023 4:18:25 PM Subject: Re: [chirp_users] FTM-3100R Andy, that img.bak file will not open on my tablet. I get a message that .bak files are not recognized. Dick On Aug 7, 2023 at 2:12 PM, Andy Zaayenga via chirp_users <chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > wrote: Thanks Peter. None of the locations are marked Skip. For reference, I’ve attached the img file, renamed to a bak extension so the servers don’t block it. The Skip field only accepts S (Skip) or blank, there is no dropdown for Priority. The manual references that there is only one Priority channel, kept in memory location 0. No memory location 0 shows in the CHIRP file. 73 Andy From: peter.fontneau(a)icloud.com <mailto:peter.fontneau@icloud.com> <peter.fontneau(a)icloud.com <mailto:peter.fontneau@icloud.com> > Sent: Monday, August 7, 2023 12:58 PM To: Andy Zaayenga <andy(a)zaayenga.net <mailto:andy@zaayenga.net> >; chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> Subject: Re: [chirp_users] FTM-3100R Check to see if you have something entered in the Skip column of Chirp. https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns Skip The scan skip mode for the channel. The values and their meanings are: * S: Skip this channel during scan * P: This channel is a priority On Aug 6, 2023, at 9:40 PM, Andy Zaayenga via chirp_users <chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > wrote: Hi folks, I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to run with CHIRP. I downloaded the radio using the FTM-3200D R template as per the CHIRP home page. Downloading and uploading works fine. I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor that are covered by the FTM-3100R. Uploading those to the radio works fine and downloading shows them all in memory. However, I notice that when I scan all 63 frequencies the radio only scans the first 14. The display just stops on the 14th location while the numbers under MR keep counting up to 63. Then it cycles back to location 1. I have the radios side by side and the FT-60R scans all the locations while the FTM-3100R only the first 14. The specs say the radio has 199 memory locations which is consistent with the CHIRP img * 199 "basic" memory channels, numbered "1" through "199". But the CHIRP image doesn't show the home channel or any of the L or U locations. * A "Home" channel, providing storage and quick recall of one prime frequency. * 10 sets of band-edge memories, also known as "Programmable Memory Scan" channels, labeled "L0/U0" through "L9/U9". Does anyone out there have an FTM-3100R and can let me know if I'm doing something wrong? I'm wondering if there's some issue with the FTM-3200D R template WRT the FTM-3100R. Thanks from a first-time poster! 73 Andy Zaayenga KD2SME Yaesu FT-60R, Yaesu FTM-3100R <Yaesu_FTM-3100R_2023-08-06.csv>_______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Pete at peter.jay12(a)icloud.com <mailto:peter.jay12@icloud.com> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> To report this email as off-topic, please email chirp_users-owner(a)intrepid.danplanet.com <mailto:chirp_users-owner@intrepid.danplanet.com> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dick Smith at w4rss(a)radioclub.org <mailto:w4rss@radioclub.org> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner(a)intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Danny at k5cg(a)hamoperator.org <mailto:k5cg@hamoperator.org> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> To report this email as off-topic, please email chirp_users-owner(a)intrepid.danplanet.com <mailto:chirp_users-owner@intrepid.danplanet.com> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

1 0

Re: [chirp_users] FTM-3100R
by Andy Zaayenga 08 Aug '23

08 Aug '23

Thanks Peter. None of the locations are marked Skip. For reference, I've attached the img file, renamed to a bak extension so the servers don't block it. The Skip field only accepts S (Skip) or blank, there is no dropdown for Priority. The manual references that there is only one Priority channel, kept in memory location 0. No memory location 0 shows in the CHIRP file. 73 Andy From: peter.fontneau(a)icloud.com <peter.fontneau(a)icloud.com> Sent: Monday, August 7, 2023 12:58 PM To: Andy Zaayenga <andy(a)zaayenga.net>; chirp_users(a)intrepid.danplanet.com Subject: Re: [chirp_users] FTM-3100R Check to see if you have something entered in the Skip column of Chirp. https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns Skip The scan skip mode for the channel. The values and their meanings are: * S: Skip this channel during scan * P: This channel is a priority On Aug 6, 2023, at 9:40 PM, Andy Zaayenga via chirp_users <chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > wrote: Hi folks, I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to run with CHIRP. I downloaded the radio using the FTM-3200D R template as per the CHIRP home page. Downloading and uploading works fine. I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor that are covered by the FTM-3100R. Uploading those to the radio works fine and downloading shows them all in memory. However, I notice that when I scan all 63 frequencies the radio only scans the first 14. The display just stops on the 14th location while the numbers under MR keep counting up to 63. Then it cycles back to location 1. I have the radios side by side and the FT-60R scans all the locations while the FTM-3100R only the first 14. The specs say the radio has 199 memory locations which is consistent with the CHIRP img * 199 "basic" memory channels, numbered "1" through "199". But the CHIRP image doesn't show the home channel or any of the L or U locations. * A "Home" channel, providing storage and quick recall of one prime frequency. * 10 sets of band-edge memories, also known as "Programmable Memory Scan" channels, labeled "L0/U0" through "L9/U9". Does anyone out there have an FTM-3100R and can let me know if I'm doing something wrong? I'm wondering if there's some issue with the FTM-3200D R template WRT the FTM-3100R. Thanks from a first-time poster! 73 Andy Zaayenga KD2SME Yaesu FT-60R, Yaesu FTM-3100R <Yaesu_FTM-3100R_2023-08-06.csv>____________________________________________ ___ chirp_users mailing list chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Pete at peter.jay12(a)icloud.com <mailto:peter.jay12@icloud.com> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> To report this email as off-topic, please email chirp_users-owner(a)intrepid.danplanet.com <mailto:chirp_users-owner@intrepid.danplanet.com> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

3 2

[chirp_users] Legacy support question--Programming Talkpod A36+
by Jim Pruitt 08 Aug '23

08 Aug '23

I am still using the last legacy version of Chirp. I just acquired a Talkpod A36+ but can't find how to program it manually and hooking it up to Chirp can not talk to the radio but Talkpod is not in the list. I tried Baofeng UV5R but that did not work. Has anyone else programmed the Talkpod A36+ using Chirp? I tried searching for programming instructions to do it manually but all hits were to a youtube video and used Chirp. Thank you. Jim Pruitt

3 3

Re: [chirp_users] TYT TH-8600 driver available for testing
by Mike 06 Aug '23

06 Aug '23

Does anyone know why upload is grayed out when I try to upload selected frequencies from radio reference? Thanks. On August 5, 2023, at 11:43 AM, Andy Knitt <andyknitt(a)gmail.com> wrote: A driver for the TYT TH-8600 is available for beta testing. It can be found attached to Issue 4851 and can be tested via the "Load Module From Issue" option in the Help menu. Support for 2 Tone, 5 Tone, and DTMF signalling is not yet fully implemented, but CTCSS and DTCS should be working. Please report issues found during testing (or positive results) via the Issue or directly to me via email. Thanks, Andy

3 2

[chirp_users] Programming ICOM IC-7100
by Michael Nadler KI7QIB 06 Aug '23

06 Aug '23

I cannot get CHIRP to properly program an ICOM 7100. Can someone provide the explicit steps they use to program their ICOM IC-7100? Computer, running Windows 10, is connected to the 7100's Remote port via USB cable. CHIRP works fine programming a Kenwood D710G in live mode. I'm following the same steps: - Download from the radio - use "help me" to find the com port - set Vendor/model to ICOM/IC-7100 - tab opens with a copy of what's programmed in the radio - Import from file... - select the CSV file with several hundred entries - click Import - random channels are programmed; others show red numbers, which is an error indication Can no longer download from radio -- the program reports "permission error". I have to restart CHIRP in order to download from the radio. After the restart and download, if I use cut/paste to update say 20 entries -- entries are programmed randomly -- same result as with import. I've searched the mail archives -- some people report problems, tentative solutions are proposed (without documenting specific steps), but no one posts any resolution. This radio programs perfectly with RT Systems software. But their software uses clone mode, not live mode. -- Michael Nadler KI7QIB

1 0

[chirp_users] TYT TH-8600 driver available for testing
by Andy Knitt 05 Aug '23

05 Aug '23

A driver for the TYT TH-8600 is available for beta testing. It can be found attached to Issue 4851 <https://chirp.danplanet.com/issues/4851> and can be tested via the "Load Module From Issue <https://chirp.danplanet.com/projects/chirp/wiki/LoadingTestModules>" option in the Help menu. Support for 2 Tone, 5 Tone, and DTMF signalling is not yet fully implemented, but CTCSS and DTCS should be working. Please report issues found during testing (or positive results) via the Issue or directly to me via email. Thanks, Andy

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 03 Aug '23

03 Aug '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 79fefeb7 FT818: Add PMS as possible scan mode. 96004c2e Clean up ga510 exit handling 6ded5e07 ga510.py: add 'reset' v2 --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 31 Jul '23

31 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 732e1c1a Fix import DVMemory to D74 4dfd5e03 retevis_rt21.py: Add Retevis RT21V - fixes #9579 62223f70 Fix spelling 50af596f Mark three radios as tested in -next 46870a14 ft4: Fix multiple issues, clone, out of range --

1 0

[chirp_users] Interesting item with Baofeng GT-5R, others? Duplex setting
by Ken Hansen 30 Jul '23

30 Jul '23

Hello all, I programmed my GT-5R with CHIRP-Next and all was fine, except when I tried to program a simplex channel in my radio to access my SHARI AllstarLink node. In the memory tab, I set "Duplex" to "off", as the logical choice among "+", "-", "split", and "off". But when I tried to transmit after loading that channel into my radio, it would not transmit (no RF, display color didn't change). So I went in, looked hard at the settings, and discovered there was another option lurking in plain sight - " " (blank). When I selected (blank) and loaded the radio with the modified channel, it worked fine (TX as expected, in simplex). If I look at the (actually pretty good) GT-5R manual that shipped with the radio, it says I have three choices for that field, menu item 25, SFT-D: "OFF [0]" TX = RX (simplex) "+ [1]" TX higher than RX freq "- [2]" TX lower than RX freq There's no mention of "split" or "off". In short, the only valid options appear to be "-", "+", and "off", which I guess could be set to " " (blanks). I just thought I'd share this here, I'll open an issue on the chirp-next website to get this fixed. Ken, N2VIP

2 1

[chirp_users] Yaesu FT-65 No upload, not a CSV tab issue - Download OK
by Peter.jay12 30 Jul '23

30 Jul '23

I’ve scanned several monthly archives for "FT-65" and separately for “upload”. The only reports I can find is that users are trying to upload a CSV tab (a common problem) and not the tab downloaded from the radio. I’ve added my channels to the FT-65 download tab and still no joy uploading. Im using a Mac OS Ventura 13.5 and an RTsystems (ZRT-USB-55) with current drivers (verified with tech support) working in the Mac. Chirp downloads from the radio without any issue. I see both TX and RX displayed on the radio and CLONE OK but no changes are made to the memory locations. I’ve reset the radio to factory defaults and made only a single change to a memory channel in Chirp to limit any input error without success. Probably something simple but I just don’t see it. Any thoughts?

3 4

[chirp_users] BTECH GMRS-V2 won't read
by Barry Evans 29 Jul '23

29 Jul '23

I am getting an error "Error reading data from radio: not the amount of data we want." Has anyone else seen this? I checked the FAQ's and looked through issues and the archives but didn't find anything. Maybe I missed something? Any help would be appreciated. Thanks in advance, Barry <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free.www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

2 3

[chirp_users] Pofung P8UV programming
by eric.fort＠fortconsulting.org 27 Jul '23

27 Jul '23

A friend of mine, not knowing any better acquired 2 pofung P8UV radios, FCC ID: 2AJGM-P51UV. The fact that the FCC's own website ( https://www.fcc.gov/oet/ea/fccid ) shows no record of this ID (though interestingly https://fcc.io does?!!!!!, now who owns FCC.io?) leaves me a bit concerned..... But that's another topic. I'm trying to figure out how to program these to at least listen to other things than the channels they came with. The supported radio's list says P8UV _(use Radioddity UV-5G)_ but that does not work. I get "Error communicating with radio, Radio did not respond.". That said, I have verified the correct serial port being used and followed the directions about turning the radio on and off, etc. The radio is on and everything plugged in as far as I can tell properly but I still get the above error after repeated attempts. Chirp works fine programming my ANYTONE UV5888UVIII. Ideas, Thanks, Eric

3 3

[chirp_users] Using The Keyboard On Radio List
by K0LNY 25 Jul '23

25 Jul '23

Hey Group, I'm sure most folks here use Chirp with the computer's mouse or touchpad, but there is an annoying thing with the keyboard, and I'm hoping those who develop Chirp might be able to address this, and I wonder if it is annoying to others. I wouldn't call it a bug, because I'm guessing most users haven't experienced it. But in the radio model list, when I'm down arrowing to find my model, a dialog pops for every model, and reads: Experimental driver Tested and mostly works, but may give you issues when using lesser common radio variants. Proceed at your own risk, and let us know about issues! Do not prompt again for Yaesu FT-25R OK * So this dialog is okay, but in prior Chirps, it only popped up once you selected your model and clicked okay. I'm guessing that most people typically just roll their pointer to the model and then get that message just one time. But when your model is 10 models down the list, it is quite annoying to have to uncheck the box and then okay. Can this dialog be moved to after the okay is clicked on a model, like it was before? What do others think? Thanks. Glenn A man with a clock always knows what time it is. A man with two clocks is never sure. -- A derivative of Segal's law

3 6

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 25 Jul '23

25 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 51bb1e93 Report FT-270 as working with the VX-170 driver 7ebfef62 Fix Find accelerator key e6de5355 Fix leaving live radio serial port open --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 22 Jul '23

22 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: c5e4b861 Allow copying memory extra settings in some cases ef38376d Make RadioSettingValue pickle-able 8ef3f131 Avoid copying FrozenMemory internal state 1e552c37 Update snapcraft.yaml 334cf6fc Remove clean files from tools/cpep8.manifest f4d80b31 Remove unreachable code found by vulture --

1 0

[chirp_users] Chirp adds content to anytone5888uviii datafile
by Rich Gilbertson 20 Jul '23

20 Jul '23

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 19 Jul '23

19 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 848e37b7 Update ft2800.py - Add support for extended TX version of radio --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 18 Jul '23

18 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 102191e3 Model Alias Map Update: RB27B, RB27V and RB627B eb22067b Update es.po 529a609c Retevis RT-470: Expand Supported Frequency Ranges - fixes #10731 1e31e497 ga510.py: add 'reset' after clone error and upload 4f39ef14 Fix export to CSV from D-STAR radios 39531729 icv86: Fix power level ordering 087e4e90 Update locale for UI changes f76873da Fix spelling 0338c1bb ga510.py: Retevis RA85 and RA685 full band support - fixes #10726 --

1 0

[chirp_users] Can't connect to BTECH UV-25X2-Gen2
by John Oliver 18 Jul '23

18 Jul '23

I get "Error reading data from radio" I'm using this cable: https://www.amazon.com/dp/B017MT7IFG It is plugged in all the way! I cannot find a debug.log There is no option for one in my CHIRP (CHIRP next-20230712 on Python 3.8.10 wxPython 4.0.7 gtk3 (phoenix) wxWidgets 3.0.4) And none is created in ~/.chirp While CHIRP is still running: joliver@blinky:~$ ls .chirp/ chirp.config stock_configs In the terminal I launched CHIRP: joliver@blinky:~$ ./.local/bin/chirp 02:52:04 PM: Debug: Unrecognized accel key 'backspace', accel string ignored. ERROR: Failed to clone: Error reading data from radio Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 369, in _rawrecv raise errors.RadioError("No data received from radio") chirp.errors.RadioError: No data received from radio During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/home/joliver/.local/lib/python3.8/site-packages/chirp/wxui/clone.py", line 68, in run self._fn() File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 758, in sync_in data = _download(self) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 533, in _download _do_ident(radio, status) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 447, in _do_ident ident = _rawrecv(radio, 50) File "/home/joliver/.local/lib/python3.8/site-packages/chirp/drivers/btech.py", line 377, in _rawrecv raise errors.RadioError("Error reading data from radio") chirp.errors.RadioError: Error reading data from radio

10 29

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 14 Jul '23

14 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: cc822d81 Update es.po 7aeeffc8 UV-5R: fine tune Aux block upload restrictions - related to #10505 249a7a3d uv5r: Warn about other settings not being honored e5a4292f tk3140: Add battery save settings 382443ec icv86: Fix missing power level c5d91ec6 Translation fixes 96d912c5 Updated file names for consistency e8f3bc10 Updated SP/PL (Polish) stock config --

1 0

Re: [chirp_users] Can't print data
by Nick 12 Jul '23

12 Jul '23

One thing or another fixed it? That's how I fix stuff. It often solves the problem. ---------- Original Message ---------- From: Rich Gilbertson <na7rg(a)email.com> To: dsmith(a)danplanet.com, chirp_users(a)intrepid.danplanet.com Cc: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] Can't print data Date: Wed, 12 Jul 2023 18:21:53 +0200 Well, Went to duplicate the problem, but first loaded the latests version of Chirp_Next.Also Microsoft update was waiting so ran the update too.Now all is good. Printed for both my Baofeng and my Anytone tri band mobile.I dont know which but one thing or another fixed it.Guess I dont need the log now, Thanks all for the help. 73Rich Sent: Tuesday, July 11, 2023 at 3:15 PM From: "Dan Smith via chirp_users" <chirp_users(a)intrepid.danplanet.com> To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] Can't print data> I completely re programmed all my channels. I want to print the list. I can get the page preview just fine. But when it goes to print, an image flashes on screen and disappeared. I can't see what the image is. Sounds like a bug, but it's hard to say why. Can you open a bug and attach your debug log from after the print fails, and include whatever file you're working from as well? https://chirp.danplanet.com/projects/chirp/wiki/How_to_report_issues Thanks! --Dan _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Rich at na7rg(a)email.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner(a)intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

1 0

[chirp_users] Can't print data
by Rich Gilbertson 12 Jul '23

12 Jul '23

3 3

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 12 Jul '23

12 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 705d000a tdh8 add only ch mode de610538 Baofeng UV-6R: Fix broken download/upload - fixes #10690 --

1 0

[chirp_users] Question About Chirp and Baofeng
by Michael A Prater 12 Jul '23

12 Jul '23

Hi I am trying to figure out how to configure the Baofeng using Chirp. I see that the preloaded lists have a Tuning Step, but I do not see this column in the image for the Baofeng. I programed a lot of channels, but I still am not sure how to get this to scan all the frequencies, or if I am missing a config, or checking for an accurate config. Any help would be appreciated. Thanks Michael

4 5

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 11 Jul '23

11 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 2c1d5802 Update es.po 9e79e7ba General translation fixes 5aaf7730 Update locale for UI changes 9852c30b Fix disabling OK button in dialog while querying eb40ff89 Allow editing/fixing failed-to-load memories d1187909 Show memory fetch errors in row header tooltip 6f7f2dd5 Fetch user information when loading modules 6607e77d Update es.po 9675fdeb PL Translation 700198c5 [UV-K5] add UV-K5(8) as an alias for UV-K5 4ca19d12 [UV-K5] add option to disable tx on a channel --

3 2

[chirp_users] CSV Uploading Issues
by Benjamin Lent 11 Jul '23

11 Jul '23

Hi, Don't know what I am doing wrong. Radio: Baofeng UV-5R Platform: Mac OS Ventura 13.4.1, Macbook M1 Chirp: Recently updated Using Microsoft Excel I have downloaded my memory from my radio, exported to csv, cut and copied the frequencies and names to the correct column and save the file. However, when I upload the file to CHIRP, it only shows the previously existing memories, none of the new. I have tried every which way to save the files, uploading them, re-downloading software. Can't seem to figure it out. Any help out all is appreciated. Thanks -- Benjamin Lent *BEL Inspection Services Ltd.* Cell: 780-977-0439 Disclaimer: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error, please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee, you should not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited.

3 5

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 10 Jul '23

10 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 3b292782 Add Maverick RA-100 & RA-425 radios b849f96f Fix commit 1d1df46a (Fix two instances of "E722 do not use bare 'except'") c8831b32 Przemienniki.net updates --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 06 Jul '23

06 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: bf5117a2 Polish (PL) translation update 24219aed Update es.po --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 05 Jul '23

05 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: aacf7952 Fix th7800 for chirp-next 11f6285b Support CSV files with BOM signatures 37081bef Re-add przemienniki.net query source 966fc664 Add Baofeng BF-1902 and BF-1903 to alias map 8af56094 Updates scan mode options and fixes settings2 struct 4b7f349e Set alarm function as ValueList for Baofeng 1900 series 474b1915 Add subclasses for BF1901 and BF1904 1e324830 Improve dragging multiple memories e20d4454 Update check_patch to look for similar drivers cede9a79 Restore selected view in settings edit on refresh d84b3f64 Created stock config file for SP 7d7336c4 Update es.po --

1 0

Re: [chirp_users] CHIRP Tips Videos
by Rich NE1EE 04 Jul '23

04 Jul '23

On 2023-06-28 17:47:-0700, you wrote: >Adding the CI with the default path to the config file that could then be edited, would be a perfectly acceptable solution and still no need for a config dialog. :)I I missed what CI means, but I like the idea of an editable config file in APPDATA.

3 3

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 03 Jul '23

03 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: d9a8f481 Amend check_commit and PR template 597b986c Save backup images after every download b257795c Add warnings and volatile flag to settings 885590d6 uv5r.py: skip Aux block when cloning to some radios - related to #10505 --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 01 Jul '23

01 Jul '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 35061331 Overhaul of Kenwood D7 Driver --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 30 Jun '23

30 Jun '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 634249a5 Retevis RB27: support full band TX/RX - fixes #10686 500a7aa1 Update es.po 3eced33f Retevis RB627B/RB27B/RB27V: Update Time-Out-Timer list - fixes #10670 --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 29 Jun '23

29 Jun '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: b970ba31 iradio_uv_5118plus.py: use space padding for channel names 64974a75 Fix some issues copy/pasting between specials 7faaf836 Make fake driver support specials for testing 7dde4a4b ic2820: Fix invalid immutable fields 7f5178a1 Update es.po 3c037da9 Update locale for stock configs menu changes 6bdf063c Clean up legacy stock config files fa37b750 Add menu option to open stock configs directory 193485d6 Allow overriding stock_configs directory 6c04f338 Add backspace as keyboard shortcut for delete --

1 0

[chirp_users] CHIRP Tips Videos
by Dan Smith 29 Jun '23

29 Jun '23

Hi all, There is a lot of useful content out on youtube that provides step-by-step instructions for some general workflows with CHIRP. However, there are a lot of other things you can do with CHIRP that never seem to get covered. Lately as I have helped people adjust to some of the things that are different in CHIRP next, I've been thinking that it might be nice to have a set of very short to-the-point videos that cover some of the more obscure features. Things you may or may not know about, or that you feel you don't quite understand enough to use properly, or things that have been added and gone unnoticed. Videos covering how to do something in CHIRP legacy may no longer be accurate or helpful today. Now, I'm not an influencer and I never will be. I'm not a cinematographer, narrator, or artist. Videos I make will never have the pizzaz of HRCC or some of the other people in the business. I'm an engineer and I'm only good at drawing straight lines and right angles. I don't want to make movies, I want to work on CHIRP. But, I can make short low-budget demonstration videos with dry voiceovers and probably help explain things better, so I figured I might give it a go. I've published the first video on custom stock configurations here: https://youtu.be/U3s5cT3IAco It's a little rough and I promise the next one will be better. If these are useful to you, please let me know here and subscribe to the channel so I can gauge interest. I have at least a few other topics that I think are not often well understood that I can cover in future videos, and let me know if you have other ideas. I want to keep these mostly radio-neutral, meaning they should be about how to use CHIRP in general, and not how to program a UV-5R. Josh already has that sort of thing covered. If it seems like making more of these is worth the trouble, I'll do that. Be gentle! :) --Dan

6 9

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 28 Jun '23

28 Jun '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 266d21ad Update window title after save-as ad915d27 Fix drag-and-drop of memories 43143db7 Update es.po 1c8ffb60 Fix radioreference query with subcat missing name bc1824ae uv-5r.py: add 'direction' to cloning status ef2b563b [uvk5]: Fix missing space in instructions --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 27 Jun '23

27 Jun '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 9c668647 Constrain port box width 5b47866d Auto-size row labels for long strings 7f0026a2 Don't override special names on UV-K5 c60ece13 Remove UV-K5 development version string 0344c833 Allow relaxing UV-K5 band limits for modified FW f81e1977 Add Quansheng UV-K5 driver 11e6bcb2 dupe() memory in set_memory() for memcache d7b82e41 Remove unused bandplan_na import from wp970i 177436f7 Remove unused variable and unneeded seek() c23be2be Fix typo 0af12dd0 Remove clean files from tools/cpep8.manifest 1d1df46a Fix two instances of "E722 do not use bare 'except'" 170b3164 Remove duplicate methods 5725c2cd Remove duplicate imports 525db7fd Remove unused variable in except clauses eb1eca18 Remove unused imports 72aae7de Remove unused dictionary SETTING_LISTS 353bcec0 Fix W605 invalid escape sequence 90cdd61b Fix undefined names 7113480a Ignore false positive "F821 undefined name '_'" b66b6247 Properly indent sub-groups in RadioSettingGroup.__str__ 3a9e9ee4 Fix spelling be00c4eb Update es.po efa07626 Retevis RB75: Support full band TX/RX - fixes #10663 55625b41 Retevis H777S/RT24: Support full band TX/RX - fixes #10454 65da68ae Baofeng GMRS-9R: Support full band TX/RX - fixes #10388 --

1 0

[chirp_users] Anyone using the new Wouxun Q332 6/2/70 HT?
by Francis Sedgemore 26 Jun '23

26 Jun '23

Greetings. This is my first post to the list. Do any of you have experience of the newish Wouxun Q332 6m/2m/70cm HT, and programming with Chirp? I'm aware that the radio is not in the list of supported devices, but wonder if it's compatible with another of the Wouxun profiles. Francis m0xbq *Dr Francis Sedgemore* physicist | journalist | writer | editor telephone: +44 7840 191336 <tel:00447840191336> website: www.hesgen.com <http://www.hesgen.com> radio: m0xbq <https://www.qrz.com/db/m0xbq>

3 3

[chirp_users] CHIRP Next
by Otis Nunn 26 Jun '23

26 Jun '23

In the old version of chirp after you searched repeaterbook for your specified repeaters and the list came up you could scroll to the bottom of the page and check a box that said de-select all then scroll thru the list and check only the ones you wanted. That feature is no longer present in the CHIRP next version and I can not figure out how to only kee p the ones I want and do away with the rest. Is there something I am missing? I have nearly pulled out all my hair trying to figure this out and, I would really rather use it than Odmaster. Sent from my iPad

2 1

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 22 Jun '23

22 Jun '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 24ea4cc2 Split TH-D7, TH-D7G, and TH-D700 into a separate file 6bebf900 Avoid leaving port helper selected on failure a60023d8 Update locale for simple import support 2c6d1093 Make radio browser read-only in frozen builds 79570785 Implement simple import function 23044ab9 Limit paste error dialog to 20 lines b94588d6 Add memory edit ops to the right-click menu 4527f666 Refactor copy/paste callbacks for easier re-use ebd57701 btech.py: fix 'Illegal set on attribute name' --

1 0

[chirp_users] can't upload to radio (Anytone 5888UVIII)
by eric.fort＠fortconsulting.org 20 Jun '23

20 Jun '23

I'm trying to upload a CSV file to my radio. ubfortunately the upload to radio option is greyed out. Why? what gives? I can download from the radio, which produces a saveable .img file and allows me to export a .csv with all the channels. I am unable however to either paste into chirp from another source or write the radio using the .csv file I exported. what gives? how do I import a .csv and output a .img file to the radio? Eric

3 3

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 19 Jun '23

19 Jun '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 8aa0fcc9 Improve IC9x driver c403e688 Allow interacting with sub-device radios 84e06c6b Allow interacting with live drivers a8dd75da Bump new version warning interval fb7982b3 Add PR check for added driver with no added image 4b7cee5a Make fast-driver fall back to all drivers b7dd6c79 Make fast-driver look for dependencies 2c96335b RT29: Add Extra DTCS Codes - fixes #10654 --

1 0

Re: [chirp_users] Errors when trying to read from Icom IC-92AD
by Joe Martine 18 Jun '23

18 Jun '23

Today I received a cable for my Kenwood TH-F6A and find it has the same problem as the Icom. These two are the only "live mode" radios I've tried, perhaps my issue is more generally with live mode? The TH-F6A cable is a USB version, branded Maxton Data. When connecting to the radio most memory channels are red, a few actually show up correctly. This time I tried adding some data to an empty memory that was successfully read. Surprisingly, this does *usually* work. A couple of times the frequency would show up in the radio, but when I added an offset or tone the software seemed to indicate it was sent (green highlight then back to white) but the radio never showed the change. On one entry I made another change (change step size or something) and BOTH changes finally showed up on the radio. While Chirp was trying to read the memories the console showed many repeats of "Unexpected result returned from radio" and "Not sure what to do with this:" followed by either a '0' or a line of gibberish. Anyone have thoughts or suggestions to try? Thanks, Joe > > I have recently gotten back to playing with my radios after a few years (too many hobbies!) and was pleased to find Chirp can work with all of them. At this point I've successfully read and reprogrammed several radios but my IC-92AD is not cooperating. > > I have the Icom programming cable and have tried reading its memory on Mac, Win and Linux with roughly the same result. Chirp reads data, but with lots of errors. Mac/Linux seem most successful, with just a few memory channels marked in red, Windows fails on almost all. But even the channels that do get read aren't quite right. There may be duplicated channel numbers, one blank the other with a frequency in it. The channel numbers may be out of order. Or some have incorrect data. > > A screenshot of one read attempt (this morning): > http://www.n5usr.net/images/230615_chirp/92ADLive_230615.png > > Note for memories 21-27, that block is actually all FRS frequencies. The ham repeater entries are valid entries but they are NOT in memory locations 21 / 23 / 25 / 27. > > I also made a log file for one run (not this morning's, but similar results): > http://www.n5usr.net/images/230615_chirp/IC92AD.log > > Am I doing something wrong? Perhaps a setting in the radio that needs to be changed? I've looked through the options and nothing strikes me as likely but you never know... > > Chirp version is: CHIRP next-20230608 on all three platforms. >

3 4