- Users - lists.chirpmyradio.com

[chirp_users] new Baofeng radio & th-f6a -- linux issues
by Rodney D. Myers 23 Jan '16

23 Jan '16

Debian jessie chirp-daily-20160110.tar.gz 2 added python packages attached is the log file I've downloaded the archives of the mail list and searched those phrases with no luck I believe I followed the instructions on the web page TH-F6a -- Start chirp; port: ttyUSB0 manuf: Kenwood radio: auto detect I get the error message; 'serial' object has no attribute 'setbaud' ========================================= UV-5R V2 -- Start chirp; port: ttyUSB0 manuf: Baofeng radio: uv5r I get the error message; failed to communicate with radio 'serial' object has no attribute 'setTimeOut' -- Rodney D. Myers <rod_dmyers(a)fastmail.fm> - kg6anx They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Ben Franklin - 1759

3 10

[chirp_users] Linux usb port in Ubuntu and Mint
by jon 23 Jan '16

23 Jan '16

I spent a lot of time trying to get my Linux computers to read from my Wouxun radio using both the Wouxun programming cable and an Ftdi1232 board and got a serial port error message. My mistake was selecting dev/ttyS0. You need to select dev/ttyUSB0 way down at the end of the tty list.

4 3

[chirp_users] how connect Icom IC-2730 to CHIRP ?
by IW2GJV 23 Jan '16

23 Jan '16

Hi, i see the table in CHIRP but i see that the new radio icom IC-2730 is not supported by CHIRP ? you tested if not work or ? how help me to assemble a cable to connect this radio at the computer to used CHIRP ? help me , best 73

1 0

[chirp_users] FT7900r programmer
by Jon GrosJean 23 Jan '16

23 Jan '16

I am going to make a FT7900r programmer using an FTDI-1232 board which can be set for 3.3V or 5V logic level. The FT7900r uses 5V logic. There is an internal 4.7k pull up resistor on the PTT line, so an external pull-up is not needed. My question is about the data polarity. The DL8WA board inverts the RS-232 data on both receive and transmit. Maybe the person writing the program wrote it to work this way. Should I invert the outputs of the FTDI board when used with CHIRP? If not, a simple diode could be used on the TX data output to pull down the PTT input. If everything should be inverted, then a couple of transistors could be used. I will make my circuit available when finished.

1 0

[chirp_users] Icom IC706Mk2G
by Dave Hartman 23 Jan '16

23 Jan '16

Anyone ever try Chirp on an Icom 706Mk2G? What was the result? -- Dave - AC2GL

1 0

[chirp_users] Error importing to VV-898
by Marc Fuller 22 Jan '16

22 Jan '16

Hi All, Just purchased a Leixen VV-898. Downloaded the base image from the radio no problem. Went to import a CSV file of my channels and getting the following error.. [cid:image001.png@01D15536.B2DD7D70] The same CSV file is OK for all my other radio's, but not to Leixen. Once you press OK, the whole program hangs. Any help appreciated. Marc

2 3

[chirp_users] Ubuntu PPA version not up to date?
by Derek Tombrello 22 Jan '16

22 Jan '16

I have installed CHIRP on my Ubuntu 14.04LTS laptop using the PPA method as described here - http://chirp.danplanet.com/projects/chirp/wiki/Download I kept getting "radio refused to send block xxx" errors, although it worked fine using the Windows under VirtualBox. After reading the bug reports, I tried using the "manual install" found here - http://chirp.danplanet.com/projects/chirp/wiki/Running_Under_Linux That worked perfectly. Looking at the About page, I see that the PPA version installed is 0.4.1 while the source version is daily-20160116. I'm just curious as to why the PPA version is not (or does not appear to be) up to date? Thanks. -- ✞ Derek Tombrello (KM4JAG) www.RobotsAndComputers.com/blog Southern Pride "First they came for the Communists, but I was not a Communist so I did not speak out. Then they came for the Socialists and the Trade Unionists, but I was neither, so I did not speak out. Then they came for the Jews, but I was not a Jew so I did not speak out. And when they came for me, there was no one left to speak out for me."

3 8

[chirp_users] Cable adapter baofeng to icom ic-2730 ?
by IW2GJV 22 Jan '16

22 Jan '16

hi, i see that is possibile to adapter the baofeng usb cable to the ICOM ic- 2730 ? in how mode i buit this adapter ? PS work CHIRP with ICOM ic-2730 radio to programm the memory ? best 73

1 0

[chirp_users] Pofun UVTEN-4
by Jose Martinez 21 Jan '16

21 Jan '16

Hey guys, I recently Purchased a Pofung UVTEN-4 dual-band handheld. I had thought that chirp would support it when I purchased it, but found out after the fact that it does not (should have made sure first:-( ). In any event are there any plans to support this radio in the near future? -- Que te vaya bien JM

2 3

[chirp_users] Support for BTECH, Juentai & Luiton radios
by raymond reese 20 Jan '16

20 Jan '16

A friend of mine has purchased the first two radios in the list below and I have compared them as well. With regards to the following radios: BTECH: UV-2501 & UV-5001 Juentai: JT-6188 Luiton: LT-898UV Will CHIRP be supporting these radios in the near future? I intend to buy the BTECH unit, whether it is supported by CHIRP or not. Anyone else out there have their own opinions of these radios and similar cousins? 73's Ray

9 14

[chirp_users] Baofeng uv-66
by Randy Elliott 20 Jan '16

20 Jan '16

Greetings to the chirp guru's Just wondering if any development has been done for Baofeng UV-66? Randy VE3JPU(a)me.com

5 13

[chirp_users] Wrong version being reported under Ubuntu
by David Chatterton 19 Jan '16

19 Jan '16

Despite having accepted the latest update to Chirp via the Software Updater and verified under Synaptic Package Manager that the version of Chirp-daily installed is 20160116~wily~1, the About menu item reports CHIRP daily-20151023 and has done so for the most recent updates. I have completely removed and re-installed chirp-daily but still get the same old version on the About CHIRP pane. Is there an image file on Ubuntu that I need to remove manually or is the updated version deficient in some way? David

4 3

[chirp_users] Icom ID-880H
by David Etheridge 18 Jan '16

18 Jan '16

I have a new iMac I can get chirp to read my radio but it will not write to it I keep getting an error saying that chirp can’t see the radio but it just cloned it. I have tried two different cables down loaded the drivers and reinstalled chirp.Thanks for any help. Michael

6 8

Re: [chirp_users] Radio Shack HTX-242
by kc6iih 18 Jan '16

18 Jan '16

I don't think any Radio Shack gear was ever computer programming capably. Jock A. Soutar KC6IIH Sent via the Samsung Galaxy S™ III, an AT&T 4G LTE smartphone <div>-------- Original message --------</div><div>From: Willis <wd4chp(a)embarqmail.com> </div><div>Date:01/17/2016 1:44 PM (GMT-08:00) </div><div>To: William Thompson <wthom1(a)aol.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> </div><div>Subject: Re: [chirp_users] Radio Shack HTX-242 </div><div> </div>NO ----- Original Message ----- From: William Thompson via chirp_users To: chirp_users(a)intrepid.danplanet.com Sent: Sunday, January 17, 2016 4:34 PM Subject: [chirp_users] Radio Shack HTX-242 Dos Chirp support Radio Shack ham equipment? 73, Bill KK4ZIU _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 3

[chirp_users] Baofeng UV-5R won't program
by lofty don 18 Jan '16

18 Jan '16

Sir, I recently purchased two of these radios, but am having trouble programming them using the purchased cable that interfaces with the radio and ends in a USB cable. I have tried with both a Windows 10 and a Windows 7 Home pc. I checked the firmware version and saw that it read: BFB297 I check the devices in Windows 10 and it shows com3 or com4, depending on the USB port and it looks good. I click on new and then click on the radio tab and put in com1 or com2 or com3 or com4 and always get an error (vendor is Baofeng and UV-5R). Thanks for any help you can give. Don in sunny Florida

7 8

[chirp_users] Is the ID-880H data protocol documented somewhere?
by John Babrick 18 Jan '16

18 Jan '16

Hello all - I just got an ID-880H and am getting started with D-STAR. I would like to try writing my own applications for programming and controlling the radio, but I cannot find anything that documents what the programming protocol is for the radio. Can someone tell me where it might be documented? I'd like to do things with the radio that CHIRP and the other programs do not do. Any guidance? Thanks in advance John Babrick, N9CNM, Frederick MD

2 3

[chirp_users] Radio Shack HTX-242
by William Thompson 17 Jan '16

17 Jan '16

Dos Chirp support Radio Shack ham equipment? 73, Bill KK4ZIU

2 1

[chirp_users] Thanks to Jim KC9HI
by Robert Morningstar 16 Jan '16

16 Jan '16

I followed your advice and uploaded the rescue image per your instructions and my KG-UV3D is now back in operation. Thanks!

1 0

[chirp_users] Wouxun KG-UV3D CHIRP support and a question on the memory chip replacement
by Robert Morningstar 16 Jan '16

16 Jan '16

Hi, I am a bit confused about CHIRP support for this radio. It is listed on the home page, but the software does not present this model in the dropdown list when I attempt to download from it and I do not see it in the model_supported.html file on the download page. Can someone clarify this for me? I need to write a new img to my radio I think. I was successful in replacing the nvram chip (I had the infamous Wouxun radio losing it settings and memory issue) by following the process listed at http://tim-yvonne.com/ham/wouxun-memory/index.htm but the radio reverted to some other band than what I purchased it for (this problem also documented at the site listed above) after I completed the memory replacement procedure. I'm stuck, I fixed the memory issue and tested it by manually programming two channels and those settings were retained after removing the battery and reinstalling it. But now I am getting the Channel Freq Out of Range issue for channels that previously worked just fine before the chip transplant. Any thoughts on this issue?

3 2

[chirp_users] Yaesu FT-2900r Driver willnot load?
by Al Cohan 16 Jan '16

16 Jan '16

Hello. I have had driver problems before but the ft-2900 loaded on my laptop. I have a new Win 7 Home Premium desktop and the driver fails to load. I've tried plugging the usb cable (FTDI From Valley Ent.) and it won't load even if the radio is turned on and is in the cloning mode. It errs every time. Appreciate any thoughts are appreciated. Al

3 2

[chirp_users] New Daily Build
by Build System 16 Jan '16

16 Jan '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160116 A list of the changes included in this build (since the last daily) follows: Changes for Build #379 [Dan Smith <dsmith(a)danplanet.com>] Fix setTimeout() -> .timeout for pyserial >=3.0 Bug #3167

1 0

[chirp_users] removal confirmation notice for mailing list chirp_users
by Andy Neal 15 Jan '16

15 Jan '16

-- * Andy* *D.A.S.S Trading & D.B.C Events.* *National Road,* *Nr Barangay Hall,* *Culis, Hermosa,* *Bataan. Philippines.* https://www.facebook.com/dasstrading *Smart **+63 (0) Andy *English Please** *Email ** andy.dasstrading(a)gmail.com <andy.dasstrading(a)gmail.com>* *Email ** andy.dbcevents(a)gmail.com <andy.dbcevents(a)gmail.com>* ** D.A.S.S Trading* Provides All CCTV & Security Radio Systems to Rent or Install for Corporate & Private use. We also bring are own UK Trained Health & Safety Consultant for Public Events & Construction. With Government Certifications in Electrical Installs,CATV,Fire & Burglar Alarms, CAT5 Data Systems. * *D.B.C Events* Provides top of the line Sound & Lighting Systems & Technical Services that match any Event Stage Building Sound & Light Systems Audio & Visual Entertainment Systems. Rigger, UK HSE Advisor & Public Safety for Events *DISCLAIMER: *The information contained in this message is legally privileged And confidential information intended only for the use of the individual or The entity named above. If the reader of this message is not the intended Recipient, you are hereby notified that any use, dissemination, Distribution or copying of this message is strictly prohibited. If you have Received this message in error, please notify me immediately and return to andy.dbcevents(a)gmail.com or andy.dasstrading(a)gmail.com <andy.ranevents(a)gmail.com> Sent with MailTrack <https://mailtrack.io/install?source=signature&lang=en&referral=andy.dasstra…>

1 0

[chirp_users] Receive noise while moving
by Tom Consodine ND5Y 12 Jan '16

12 Jan '16

I found two YouTube videos that show JT-6188 and UV-5R noise while moving. It doesn't appear to be the same thing happening on both radios as I thought it might be. https://www.youtube.com/watch?v=HBwk0M79DYU https://www.youtube.com/watch?v=jl40YU3Jsc4 Tom

6 6

[chirp_users] Help with Importing
by michael haynes 12 Jan '16

12 Jan '16

After downloading from BF-F8HP to create image and then move to Import from data source, selecting RepeaterBook is when everything stops. Little blue circle icon is motionless.. Appears not connecting to RepeaterBook. This is my first experience with Chirp.. I downloaded Chirp 12/25/15 version and Latest build 1/10/16 version on two different computers with same results.. Any help? Thanks

1 0

[chirp_users] Help with Importing
by michael haynes 12 Jan '16

12 Jan '16

After downloading from BF-F8HP to create image and then move to Import from data source, selecting RepeaterBook is when everything stops. Little blue circle icon is motionless.. Appears not connecting to RepeaterBook. This is my first experience with Chirp.. I downloaded Chirp 12/25/15 version and Latest build 1/10/16 version on two different computers with same results.. Any help? Thanks

1 0

[chirp_users] IC-92AD not downloading all memories.
by Wenlock Burton 11 Jan '16

11 Jan '16

Hi, Just tried the latest build, still not reading all memories, Like to loan my 92AD to get the code fixed but international postage would be a big issue. i found my old bug report from a couple of years ago when I was using the Windows build to transfer the memories from my 91AD to my new 92AD and it did work with both radios the only issue being the wrong code identifying the 92AD in the file. Curious as to what went wrong since then. Wenlock VK3YWB

1 0

[chirp_users] New Daily Build
by Build System 10 Jan '16

10 Jan '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160110 A list of the changes included in this build (since the last daily) follows: Changes for Build #378 [Dan Smith <dsmith(a)danplanet.com>] Add test images for #3119 [<Joseph.P.Scanlan(a)n7xsd.us>] [IC-7000] Minor LOG.debug changes fixes #3149 Swapped source and destination addresses in one debug statement to reflect the direction of the arrow; added extd_number to another LOG.debug; and added a third LOG.debug. [Pavel Milanes (CO7WT) <co7wt(a)frcuba.co.cu>] [New Model] Support for the Kenwood TK-76x/86x non G models, fixes issue #3139 This patch add support for the Kenwood Mobile part of the old "Serie/Family 60", including this radios. VHF: TK-760/762, all versions, including H models UHF: TK-860/862, all versions, including H models Only basic common ham settings support by now. [Marco Filippi <iz3gme.marco(a)gmail.com>] [IC-W32E] support for E version of IC-W32 The only real difference from IC-W32A is _model id but to distinguish the images an extra byte at the end is added implement #280 [<Joseph.P.Scanlan(a)n7xsd.us>] [IC-7000] Fix Show Raw Memory #3127 Method “get_raw_memory” was overlooked when bank support was added to the IC-7000 (an Icom CI-V radio). This patch corrects that oversight. [<Joseph.P.Scanlan(a)n7xsd.us>] [IC-7000] Add Split Duplex fixes #3101 Independent receive and transmit frequencies can be set for each IC-7000 memory channel. This is enabled when Duplex is set to split. The transmit frequency is entered in the Offset field. This patch exposes the Offset field for all memories. Offset changes to memories with plus, minus, or no split are silently ignored; the IC-7000 does not support per channel offset. [Pavel Milanes (CO7WT) <co7wt(a)frcuba.co.cu>] [TK-760G] New Model, support the VHF part of the Kenwood 60G family, fix #2999 This patch is the support to the VHF part of the Kenwood 60G family, and must be appplied after the patch for the issue #3119 [Pavel Milanes (CO7WT) <co7wt(a)frcuba.co.cu>] [run_tests] support for bank models with channels always tied to a bank, fix #3119 The run_test script has no support for bank models in which a channel must allways be tied to a bank. I found this in the development of a new driver in issue 2999, that driver is ready but can't go to the daily build until this is fixed. This patch fix this, all you have to do is add a variable named channelAlwaysHasBank to your model class and make it True. Cheers, Pavel. [Tyler Tidman <tyler.tidman(a)draak.ca>] Fix minor typo in TS-2000 CW-R mode. Fixes #3103. [Tyler Tidman <tyler.tidman(a)draak.ca>] Improve pep8 compliance in TS-2000 driver. Fixes #3093. [Tyler Tidman <tyler.tidman(a)draak.ca>] Correct headers and number of trailing commas in stock configs. Fixes #3089. [Tyler Tidman <tyler.tidman(a)draak.ca>] Add DE Freenet and UK Business Radio Simple Light stock configs. Fixes #2755.

1 0

[chirp_users] Is this official site?
by Pedja YT9TP 10 Jan '16

10 Jan '16

Is this official? http://chirpsoftware.com --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

2 1

[chirp_users] Baofeng UV5R Radio Did not Respond error
by Michael Mullett 09 Jan '16

09 Jan '16

I am new to the radio and the Chirp software. I downloaded the latest build, but when I try to download from radio I get error "Radio Did Not Respond"error. Any suggestions? Thanks, Mike

4 4

[chirp_users] Programming Baofeng UVr5
by mazby 09 Jan '16

09 Jan '16

Trying to program a partial frequencies range to scan (not channel scan!). Apart of making the receiver range narrow no other idea. Any suggestions welcome. Mazby

4 3

[chirp_users] Boefeng UV-5R V2+
by Matt Wachala 08 Jan '16

08 Jan '16

I am still having trouble downloading from my brand new radio I got. It says "Radio did not respond" when I try to download the base so I can add my frequencies into the radio. Please help. I downloaded the new version of Chirp. Did I not need to do so... If not can I get an older version of it. When my radio actually worked. Please help. Thanks Sincerely, Matthew Wachala

5 4

[chirp_users] Wouxun KG-UV950P?
by Roger Stenning 07 Jan '16

07 Jan '16

Hi. I note that the Wouxun KG-UV950P still isn't on the list, despite it being out for a while, now; given that the TYT equivalent, the TH-9800 is already provided for in daily builds, what's the current state of play regarding CHIRP and the Wouxun KG-UV950P? Thanks in advance, 73, Roger de G1LIW

1 0

[chirp_users] Yaesu FT-991
by Jay Rowe 07 Jan '16

07 Jan '16

Will the Yaesu FT-991 be supported by the Chirp software? <http://www.rkvideo.tv/> RK Pro Logo Horz <http://www.easttexasautos.com/> etalogo Jay Rowe Office: 903-758-4336 Cell: 903-452-0387 --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

1 0

[chirp_users] TYT TH-UVF8D ???
by Paul K. 07 Jan '16

07 Jan '16

Will CHIRP program a TYT TH-UVF8D Dual Band HT? -- Paul K. WA0BAG

2 1

[chirp_users] Anyone with Baofeng BF-UVB2 Plus?
by Darkman900＠libero.it 05 Jan '16

05 Jan '16

Hi everybody! I'd like to know if anybody here is using Chirp with the last Baofeng (or so it seems to be) the BF-UVB2 Plus. Although it doesn't show in the list, I have tried all the radios present but haven't been able to make Chirp working with it. Any advice will be very appreciated. Thanks and Happy new Radio-Year! :) Jack

3 2

[chirp_users] R: Re: Anyone with Baofeng BF-UVB2 Plus?
by Darkman900＠libero.it 05 Jan '16

05 Jan '16

I'm using the 3.2.0.0 version and all I have is "Radio did not ack programming mode" Using the UV-B5 Profile in "download from radio" mode. ----Messaggio originale---- Da: kd9ebr(a)gmail.com Data: 05/01/2016 16.33 A: "Darkman900(a)libero.it"<Darkman900(a)libero.it>, "Discussion of CHIRP"<chirp_users(a)intrepid.danplanet.com> Ogg: Re: [chirp_users] Anyone with Baofeng BF-UVB2 Plus? First thing, check your USB to serial adapter, if it's a prolific clone it needs to be driver version 3.2.02 I believe. Anything newer doesn't talk to the radio. After that, make sure you upload from the radio to your computer, that will be your base file that you will modify. Look at the chirp faq page for more info, they also have the working driver for the USB cable. -----Original Message----- From: Darkman900--- via chirp_users <chirp_users(a)intrepid.danplanet.com> To: chirp_users(a)intrepid.danplanet.com Sent: Tue, 05 Jan 2016 9:29 Subject: [chirp_users] Anyone with Baofeng BF-UVB2 Plus? Hi everybody! I'd like to know if anybody here is using Chirp with the last Baofeng (or so it seems to be) the BF-UVB2 Plus. Although it doesn't show in the list, I have tried all the radios present but haven't been able to make Chirp working with it. Any advice will be very appreciated. Thanks and Happy new Radio-Year! :) Jack

2 1

[chirp_users] - character no supporting in Name field anymore?
by Nick Ellson 04 Jan '16

04 Jan '16

Just imported my Kenwood D72A radio to make some mods after downloading the CHIRP daily-20151225 build, chirp shows all my previously added channels with the - character in them, but if I touch any of them it coughs errors says the - is not a supported character? Is that a change based on model? My Radio supports it and it makes the display of multiple repeater channels nice to visually separate. W7AIA-1 W7AIA-2 (etc) N7CKY Nick

3 9

[chirp_users] Baofeng GT-3 Mark-II
by John Benson 02 Jan '16

02 Jan '16

I have all frequencies saved in a CHIRP file. I can't figure out how to export to the Radio. The icon for upload to Radio will not become active.Suggestions? Thanks, John

4 7

[chirp_users] Private line problems
by Swan, Nicholas D 01 Jan '16

01 Jan '16

When I bring up CHIRP for my BAOFENG UV-B5, all of the tone pls shoe 88.5, and all the digitals show 023 (both are the lowest tone digits). All of the tone tags are off. I can NOT clear this up, even if I change Rx and Tx tone, one will always go back to it's origonal lowest setting. There seems no way to to clear them all. HELP! Nick Swan

4 4

[chirp_users] HELP with Chirp Daily 20151225 and Baofeng UV-5R V2+
by Starr Center 31 Dec '15

31 Dec '15

Same basic issue, the Chirp program does not recognize the radio. ALSO - when I clicked to open the 1225 Daily nothing happens - for macOS. Your assistance would be appreciated. Thank you. Starr

1 0

[chirp_users] Help with Baofeng UV-5R V2+
by Matt Wachala 31 Dec '15

31 Dec '15

I am trying to clone my new Baofeng UV-5R V2+ and my programming cable is up to date and I just so happened to download the newest version of chirp today and now I can download or upload anything from or to my radio. Even from my old radio it won't do either. It worked about a week ago. Now it won't do anything. Please help... Thanks. Sincerely, Matthew Wachala

3 2

[chirp_users] Daily Build ID51A Linux error
by Ryan Collier 30 Dec '15

30 Dec '15

Greetings, I am trying to edit ur call lines. It lets you change the ur call but not the description. Also I am getting this error. ERROR: 'NoneType' object has no attribute 'split' Exception in thread Thread-5: Traceback (most recent call last): File "/usr/lib/python2.7/threading.py", line 810, in __bootstrap_inner self.run() File "/home/riggs498/Downloads/chirp-daily-20151225/chirp/ui/common.py", line 261, in run job.execute(self.radio) File "/home/riggs498/Downloads/chirp-daily-20151225/chirp/ui/bankedit.py", line 138, in execute mappings = self.__model.get_memory_mappings(mem) File "/home/riggs498/Downloads/chirp-daily-20151225/chirp/drivers/icf.py", line 548, in get_memory_mappings return [self.get_mappings()[index]] IndexError: list index out of range Thanks, Ryan (KB8PMY) KD8TUZ Hamilton Wireless Radio Club

1 0

[chirp_users] 'help' unsuscribe
by guilhem chiron 26 Dec '15

26 Dec '15

'help' unsuscribe Le 25/12/2015 21:00, chirp_users-request(a)intrepid.danplanet.com a écrit : > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. New Daily Build (Build System) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 25 Dec 2015 00:08:17 -0800 (PST) > From: Build System <donotreply(a)danplanet.com> > Subject: [chirp_users] New Daily Build > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <974395857.81.1451030897149.JavaMail.jenkins(a)eagle.danplanet.com> > Content-Type: text/plain; charset="utf-8" > > Greetings, > > A new daily build of CHIRP is available. This includes changes made > directly to the tree yesterday, and may include additional features, > bug fixes, and/or bugs. If you are interested in trying it, grab it > from the following location: > > http://trac.chirp.danplanet.com/chirp_daily/daily-20151225 > > > A list of the changes included in this build (since the last daily) > follows: > > Changes for Build #377 > [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Update for New Broadcast FM Preset Method > > Add support for new station frequency storage method. The latest > firmware no longer subtracts 650 before storing the frequency. > > related to #2765 > > [Pavel Milanes (CO7WT) <co7wt(a)frcuba.co.cu>] [PATCH][FD-268] Improved detection + new models, PEP8, fixes #2169 > > Please note the updated images, detection has been improved and > old img on the tree can make the test fail. > > Feidaxin driver is now PEP8 compatible. > > Minor changes in the structure, typos cleaning, fix some sentences > with bad/confuse syntax (sorry native Spanish speaking here) > > Add support to the following new feidaxin radios: > FD-150A > FD-160A > FD-460A > FD-450A > FD-288A > > This radios was tested hacking a FD-268A with the factory software, > so maybe there is some bug in there, please report if so. > > > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > End of chirp_users Digest, Vol 84, Issue 22 > *******************************************

2 2

[chirp_users] New Daily Build
by Build System 25 Dec '15

25 Dec '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20151225 A list of the changes included in this build (since the last daily) follows: Changes for Build #377 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Update for New Broadcast FM Preset Method Add support for new station frequency storage method. The latest firmware no longer subtracts 650 before storing the frequency. related to #2765 [Pavel Milanes (CO7WT) <co7wt(a)frcuba.co.cu>] [PATCH][FD-268] Improved detection + new models, PEP8, fixes #2169 Please note the updated images, detection has been improved and old img on the tree can make the test fail. Feidaxin driver is now PEP8 compatible. Minor changes in the structure, typos cleaning, fix some sentences with bad/confuse syntax (sorry native Spanish speaking here) Add support to the following new feidaxin radios: FD-150A FD-160A FD-460A FD-450A FD-288A This radios was tested hacking a FD-268A with the factory software, so maybe there is some bug in there, please report if so.

1 0

[chirp_users] North American bandplan errors in Australia
by Wenlock Burton 24 Dec '15

24 Dec '15

I live in Australia so why does Chirp keep reporting North American Bandplan has duplicates? Thanks WenlockVK3YWB

1 0

Re: [chirp_users] Yaesu VX-8DR user
by Michael E. Jaggers 23 Dec '15

23 Dec '15

2 1

[chirp_users] Yaesu VX-8DR user
by David Wilson 23 Dec '15

23 Dec '15

Do not see the VX-8DR listed, is the VX-8DR workable under VX-8R? David Wilson

1 0

Re: [chirp_users] New Daily Build
by gerry＠lifetime.net.au 23 Dec '15

23 Dec '15

Sorry - we are on our Xmas Break - we will respond to your email on our return - 11 January 2016 Hope you have/had a great Festive Season!

1 0

Re: [chirp_users] New Daily Build
by gerry＠lifetime.net.au 23 Dec '15

23 Dec '15

Sorry - we are on our Xmas Break - we will respond to your email on our return - 11 January 2016 Hope you have/had a great Festive Season!

1 0

[chirp_users] New Daily Build
by Build System 23 Dec '15

23 Dec '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20151223 A list of the changes included in this build (since the last daily) follows: Changes for Build #376 [<Joseph.P.Scanlan(a)n7xsd.us>] [IC-7000] Add Scan Skip Memory fixes #3085

1 0