- Users - lists.chirpmyradio.com

Re: [chirp_users] Thanks
by lasomrak 31 Aug '16

31 Aug '16

I don't find the word "port"when I go to device manager, using windows 7. KK4RC. -------- Original message -------- From: Paul Mills <ac0hy(a)wpmills.com> Date: 08/31/2016 6:15 AM (GMT-05:00) To: chirp_users(a)intrepid.danplanet.com Subject: Re: [chirp_users] Thanks You should not have to guess at port number. Go into device manager, and see what port Windows assigned. If using other operating system, there are other ways of finding. On 8/29/2016 17:00, lasomrak wrote: > How did you find the correct port. I went through 1-9 with no luck. KK4RCC > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to larry at lasomrak(a)bellsouth.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 2

[chirp_users] 857D
by godsgrace4ever1969＠yahoo.com 31 Aug '16

31 Aug '16

I have tried several times to upload a list of 48 repeaters and everytime I upload to the radio it only receives 20 memory lines of the 48. Any ideas why? Thank You, Wevone Hobbs

4 7

Re: [chirp_users] Thanks
by lasomrak 31 Aug '16

31 Aug '16

How did you find the correct port. I went through 1-9 with no luck. KK4RCC -------- Original message -------- From: Dick Smith <w4rss(a)radioclub.org> Date: 08/29/2016 5:50 PM (GMT-05:00) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: [chirp_users] Thanks Back on August 23, I had posted regarding a problem with a Valley Enterprises cable. I neglected to let all of you know how much I appreciated your replies. Evidently it was a com port issue and after making sure it was seeing the right com port, everything worked as advertised. Thanks to all of you who had responded. 73 Dick W4RSS _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to larry at lasomrak(a)bellsouth.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] D-Star Programming
by Dick Smith 30 Aug '16

30 Aug '16

I have an ID-880H and want to program some D-star repeaters. I've down the registration and have been okayed. I've read so many different posts about programming and watched so many videos, that I'm more or less completely confused about the operation. I downloaded what I have currently in the radio and noticed that in Chirp there seem to be fewer spots to put the D-star info. I feel like what is shown is all that's needed, but I want to make sure first. I do have the original programming I did with the Icom software saved so I can reload it if necessary. I've also looked through the last 6-8 months of list archives and didn't find anything that was to helpful regarding the programming aspect. Any 880H users who might be able to shed some light on the whole subject for me? 73 Dick W4RSS

3 3

[chirp_users] FTDI good - not FTDI bad
by Richard B. Emerson 30 Aug '16

30 Aug '16

Following the traffic here, I think the following should be (if it isn't) a FAQ item. Nonetheless it bears repeating here: FTDI conversion chips and drivers are extremely stable. Anything else, including Prolific, is a gamble with poor odds. It's that simple. Background: On our sailboat, I do a number of serial/USB conversions. This converts (admittedly ancient) NMEA 183 serial data from instrumentation for a USB port on a laptop running a navigation program (Coastal Explorer - don't leave port without it). Initially I used Prolific-based convertes (what did I know?). Simply put, it became one non-stop headache. Data wouldn't come through, drivers stopped functioning, etc., etc. I switched to an FTDI-based 10-port serial/USB converter. The only changes to the system was to plug the DB-9 pigtails into the new converter and load the FTDI driver. End of problems, no crashes, full functionality. To clarify, one port services the full NMEA 183 data stream from the autopilot computer (speed through the water, depth, wind direction and speed, full GPS data stream [position, speed over the bottom, direction, GPS status, time of day)) and the port sends steering information to the autopilot, waypoint location data, and more. Another port sends data to the VHF and SSB radios (position, time of day) and receives data from the VHF (Digital Selective Calling data including emergency data received). Another port sends position, time of day, waypoint location data and receives target data from the radar including Modified Automatic Radar Plotting Aid data. The last active port receives data from the Automatic Identification System and an auxiliary GPS receiver (part of the AIS system). (full translation of "NMEA 183", "waypoint", etc. available off-list) This is a long and probably very boring summary of what goes through FTDI devices at a mix of data rates (4800 baud for all but the AIS, which works at 38400 baud). If the FTDI part fails, life gets ugly fast (yes, there are backups). I bet a lot on FTDI and have no cause to regret it. Prolific devices were... my wife wore earplugs when the converters failed. Again, FTDI good - not FTDI bad. 73 de KC3DOO Rick

9 11

[chirp_users] Thanks
by Dick Smith 29 Aug '16

29 Aug '16

Back on August 23, I had posted regarding a problem with a Valley Enterprises cable. I neglected to let all of you know how much I appreciated your replies. Evidently it was a com port issue and after making sure it was seeing the right com port, everything worked as advertised. Thanks to all of you who had responded. 73 Dick W4RSS

1 0

[chirp_users] Downloading
by lasomrak 29 Aug '16

29 Aug '16

Trying to download from UV82 radio to chirp but computer or chirp won't recognize a port screen shows error 2,any suggestions. Thanks.

3 2

[chirp_users] Baofeng UV5R hack
by Glenn 28 Aug '16

28 Aug '16

I have been reading on-line that Chirp will open up my Baofeng for listening to frequencies outside the current bands. Is this true? And if so, How do I do this? Thanks Glenn

5 11

[chirp_users] Yes Btech
by Paul Harris 28 Aug '16

28 Aug '16

Use the right name and it works like a charm. Used BTECH instead of Bao. and programed in seconds all my local repeaters. Thank you .Paul KB2VEC

1 0

[chirp_users] Baojie bj-218 programming?
by Ivano 28 Aug '16

28 Aug '16

Anyone use Chirp for programming the BJ-218 (or TM-218, same thing).? Thanks for any info Ivano i4ifl

1 0

[chirp_users] Radio did not respond error
by Paul Harris 27 Aug '16

27 Aug '16

Baofeng UV-5X3Cable PCO3 Had to get drivers to get to this stage but radio does not respond. Do the red and green lights on cable usb end have to remain on or just flash on when you plug in. Computers is a HP windows 7.Paul KB2VEC

6 6

[chirp_users] UV-5x3
by Robert Stelmock 27 Aug '16

27 Aug '16

I can chirp download with my uv5r and Uv82x but I can not get the uv-5x3 to download... Same comuter program and cable....but the uv5x3 will not work,any ideas? Robert Stelmock bobdotfla(a)verizon.net

2 2

[chirp_users] uv5x3
by Robert Stelmock 27 Aug '16

27 Aug '16

OOOPS did some reading...now working as btech Thanks list...got it Bob Robert Stelmock bobdotfla(a)verizon.net

1 0

[chirp_users] Unable to read UV-2501
by john bryant 26 Aug '16

26 Aug '16

Just got a new Btech UV-2501 and unable to read from radio. Error message "radio did not enter clone mode". Then the radio restarts? Anticipating a request for logging files, I downloaded the manufacturer's programming software and installed. Whenever I try to read from radio, the radio repeatedly cycles on and off until I shut down the software. Any thoughts? Thanks, John, N5SU

5 15

[chirp_users] New Model #2761: Baofeng/Pofung UV-6R
by David Chatterton 25 Aug '16

25 Aug '16

This works for me. Thank you very much. David, 2E0FNY

2 1

[chirp_users] Chirp and the volume control
by Ken 24 Aug '16

24 Aug '16

I'm curious, why does Chirp advise you on Baofengs "(volume may need to be set at 100%)"? Ken

6 9

[chirp_users] Not working with new Baofeng UV-5X3
by chirp＠ish.net 24 Aug '16

24 Aug '16

My new Baofeng UV-5X3 tri-band HT -- https://baofengtech.com/uv-5x3 -- just arrived and CHIRP does not even communicate with it. I have a fair amount of experience with other Baofeng models and the software, and I confirmed that exactly the same configuration and cabling is still working with my UV-5R. I have the 20160819 release of CHIRP. I tried using the UV-5X setting first, and then after than didn't work tried a number of other settings including UV-5R, BF-F8HP, and so on. The "Clone progress" dialogue is shown but the progress bar remains unmoved, an error dialogue pops up that reads "An error has occurred" and "Radio did not respond", followed by a delay before the radio lights up its LED green and then red. This is on Windows 10 and I could try on Ubuntu 16.04 if requested, but as I said this is a working system for other radios. -- Mike

5 5

[chirp_users] ID-880H
by Dick Smith 24 Aug '16

24 Aug '16

I received the programming cable from Valley Ent. Plugged it in to the pc and to the 880h, but Chirp does not see it. I downloaded the Icom clonging software and it works perfectly. Any thoughts? Dick W4RSS

7 7

[chirp_users] (no subject)
by Everette Prosise 22 Aug '16

22 Aug '16

I am using CHIRP to change the settings, Power ON Message, but it does not save it. When I upload to the radio, the original message is displayed and not the change. How do I get the changes saved? Sent from Windows Mail

6 5

[chirp_users] Wouxun KG-UV8E
by D.J.J. Ring, Jr. 21 Aug '16

21 Aug '16

Hi guys, A friend has a new Wouxun KG-UV8E. Someone said it would work with the Wouxun KG-UV8D selection of the daily build of CHIRP. dmesg tail reveals that the Wouxun programmiing cable is using /dev/tty/USB0 which is owned by root and group uucp. So I added uucp to my user's groups. ls /dev/ttyUSB0 -l crw-rw---- 1 root uucp 188, 0 Aug 19 14:09 /dev/ttyUSB0 [djringjr@laptop ~]$ groups sys adm wheel uucp audio users Daily Build - chirpw --version CHIRP daily-20160802 on Linux laptop 4.7.0-1-ARCH #1 SMP PREEMPT Mon Aug 8 22:24:23 CEST 2016 i686 (Python 2.7.12) Here's what happens. [djringjr@laptop ~]$ chirpw (process:2492): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/chirp/ui/clone.py", line 249, in run self.__radio.sync_in() File "/usr/lib/python2.7/site-packages/chirp/drivers/kguv8d.py", line 375, in sync_in self._mmap = self._download() File "/usr/lib/python2.7/site-packages/chirp/drivers/kguv8d.py", line 391, in _download self._identify() File "/usr/lib/python2.7/site-packages/chirp/drivers/kguv8d.py", line 353, in _identify _chksum_err, _resp = self._read_record() File "/usr/lib/python2.7/site-packages/chirp/drivers/kguv8d.py", line 315, in _read_record raise errors.RadioError('Radio did not respond') RadioError: Radio did not respond ERROR: ---------------- ERROR: Clone failed: Radio did not respond ERROR: --- Exception Dialog: Radio did not respond --- ERROR: None ERROR: ---------------------------- I tried the same cable and radio on Windows 10 using the CHIRP latest daily build Same error - could not communicate with radio. Using the Wouxun software with correct driver on Win10, same error. Any suggestions? David N1EA

3 3

[chirp_users] Wouxun KG-UV8E
by D.J.J. Ring, Jr. 21 Aug '16

21 Aug '16

Hi guys, A friend has a new Wouxun KG-UV8E. Someone said it would work with the Wouxun KG-UV8D selection of the daily build of CHIRP. dmesg tail reveals that the Wouxun programmiing cable is using /dev/tty/USB0 which is owned by root and group uucp. So I added uucp to my user's groups. ls /dev/ttyUSB0 -l crw-rw---- 1 root uucp 188, 0 Aug 19 14:09 /dev/ttyUSB0 [djringjr@laptop ~]$ groups sys adm wheel uucp audio users Daily Build - chirpw --version CHIRP daily-20160802 on Linux laptop 4.7.0-1-ARCH #1 SMP PREEMPT Mon Aug 8 22:24:23 CEST 2016 i686 (Python 2.7.12) Here's what happens. [djringjr@laptop ~]$ chirpw (process:2492): Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale. ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/site-packages/chirp/ui/clone.py", line 249, in run self.__radio.sync_in() File "/usr/lib/python2.7/site-packages/chirp/drivers/kguv8d.py", line 375, in sync_in self._mmap = self._download() File "/usr/lib/python2.7/site-packages/chirp/drivers/kguv8d.py", line 391, in _download self._identify() File "/usr/lib/python2.7/site-packages/chirp/drivers/kguv8d.py", line 353, in _identify _chksum_err, _resp = self._read_record() File "/usr/lib/python2.7/site-packages/chirp/drivers/kguv8d.py", line 315, in _read_record raise errors.RadioError('Radio did not respond') RadioError: Radio did not respond ERROR: ---------------- ERROR: Clone failed: Radio did not respond ERROR: --- Exception Dialog: Radio did not respond --- ERROR: None ERROR: ---------------------------- I tried the same cable and radio on Windows 10 using the CHIRP latest daily build Same error - could not communicate with radio. Using the Wouxun software with correct driver on Win10, same error. Any suggestions? David N1EA

2 2

[chirp_users] New Daily Build
by Build System 19 Aug '16

19 Aug '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160819 A list of the changes included in this build (since the last daily) follows: Changes for Build #426 [Dan Smith <dsmith(a)danplanet.com>] Add test image for BTECH UV-5X3 Related to #3931 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-6X3] Add Support for BTech UV-5X3 This driver adds support for the BTech UV-5X3 tri-band handheld radio. related to #3931

1 0

[chirp_users] 2M operating info needed
by Richard B. Emerson 19 Aug '16

19 Aug '16

I need some general advice on 2m and repeater use. Since this is off-topic for this list/forum, please contact me directly. 73 de KC3DOO Rick

2 2

[chirp_users] ReReRe: UV-6R driver issue
by stephen johnston 19 Aug '16

19 Aug '16

yes, did some more tests if you type it on the keypad and store it, when you go back into the menu's it's just displaying the previously entered data - maybe from a buffer somewhere. so it looks like it's just the inverted power levels need fixing. -- stephen johnston

1 0

[chirp_users] ReRe: UV-6R driver issue
by stephen johnston 19 Aug '16

19 Aug '16

i'll try again. in chip you set the base frequency, offset & shift direction. how that gets into the radio i supose depends on the radio, but i have it set in chip and it's not making it into the radio. as for the radio itself, i can tell you now - because i have done it last week. unlike older baofeng stuff with direct-entry bugs and stupid work arounds from places like Miklor, you can enter the frequency, offset and shift-direction from the keypad - and it works - and you can save it!! so i suppose later, i will reset the radio, put a channel in by keypad - then read it with chip. if it's right, i will reset the radio again and upload the downloaded data to see if it's still o.k.. -- stephen johnston

2 1

[chirp_users] more UV-6R issues
by stephen johnston 19 Aug '16

19 Aug '16

when uploading to the radio, the power level is being inverted. -- stephen johnston

2 2

[chirp_users] UV-6R driver issue
by stephen johnston 19 Aug '16

19 Aug '16

i just tried the latest "daily", i imported some channels from my UV82 - most stuff seems o.k. but it does not appear to be uploading the shift direction, or frequency offsets to the radio. i see them in the tab i imported them into (and saved) but they are not showing in the radio after upload. also, maybe not a bug, but is the alpha-tag on the UV-6R supposed to be 6 characters instead 7? if not then it's also not uploading the complete channel name field - only the first 6 characters.

2 1

[chirp_users] Programming cables
by w4rss＠radioclub.org 18 Aug '16

18 Aug '16

Anyone have a source for a programming cable for the Icom IC-880h? Thanks, Dick W4RSS

5 4

[chirp_users] Chirp not included in Ubuntu 16.04 updates
by Wenlock Burton 18 Aug '16

18 Aug '16

Hi Seems Chirp updates are not being included in Ubuntu 16.04 LTS. I've had no updates to Chirp since upgrading to 16.04 two weeks ago Wenlock Sent from my iPhone

2 2

[chirp_users] New Daily Build
by Build System 18 Aug '16

18 Aug '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160818 A list of the changes included in this build (since the last daily) follows: Changes for Build #425 [Dan Smith <dsmith(a)danplanet.com>] Add test image for Baofeng UV-6R Related to #2761 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-6R] Add Support for Baofeng UV-6R This driver adds support for the Baofeng UV-6R handheld radio. related to #2761 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-6R] Add Baofeng Common Driver This driver is being added in preparaton for adding Baofeng UV-6R support. It contains common functions that will be used for new Baofeng (and similar) handheld radios. related to #2761

1 0

Re: [chirp_users] Programming cables
by kc6iih 18 Aug '16

18 Aug '16

Try RTSystems.com Sent from my Samsung Galaxy Tab®|PRO -------- Original message -------- From: Jardy via chirp_users <chirp_users(a)intrepid.danplanet.com> Date:08/17/2016 2:22 PM (GMT-08:00) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] Programming cables Try EBay. Jardy Dawson WA7JRD Sent from the Death Star for Darth Vader's eyes only. Any other reception will be severely punished. 💀 > On Aug 17, 2016, at 13:40, w4rss(a)radioclub.org wrote: > > > Anyone have a source for a programming cable for the Icom IC-880h? > > Thanks, > Dick > W4RSS > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jardy72(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

4 4

Re: [chirp_users] Programming cables
by John 18 Aug '16

18 Aug '16

On 8/17/2016 7:04 PM, Richard B. Emerson wrote: > As with anything, know who you're buying from. I met Valley Enterprises > via eBay, where they have a virtual store. I'm pleased with the FTDI > cable they sold me via eBay. > > 73 de KC3DOO > Rick I, too, am a satisfied Valley Enterprises customer. After buying a Chinese cable from eBay to program my Kenwood HT and having it not work, I bought the Valley Enterprises cable and it worked just fine... -- 73 K2LRA - John

1 0

[chirp_users] Kenwood NX329
by beachwoodpeter＠gmail.com 17 Aug '16

17 Aug '16

Any chance someone will add the Kenwood NX series radios? Like the NX320. Peter Wilcox Beachwood Productions Beachwoodproductions.com > On Jul 7, 2016, at 12:16 PM, William Thompson via chirp_users <chirp_users(a)intrepid.danplanet.com> wrote: > > I'm helping a friend program his new Baofeng BF-F0V2+ and n we're receiving a "experimental firmware error". Has a version been released for this radio? > > 73, > Bill > KK4ZIU > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Peter at beachwoodpeter(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] New Daily Build
by Build System 16 Aug '16

16 Aug '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160816 A list of the changes included in this build (since the last daily) follows: Changes for Build #424 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Add Support for UV-6 with Longer 12 byte Ident The currently shipping Baofeng UV-6 responds to the clone request by returning a 12 byte "ident". The original model replies with an 8 byte "ident" (the same as all other radios currently supported by the uv5r.py driver). The current CHIRP driver appends the radio's memory image after the "ident" so the settings structures are all offset by 8 bytes to accomodate these extra bytes at the beginning of the image. So there must alway be exactly 8 bytes prepended to the actual memory map data. Original UV-6 ident: AA 36 74 04 00 05 20 DD New UV-6 ident: AA 01 01 36 01 74 01 04 00 05 20 DD This patch works around the issue by doing the following... 1. The "ident" is now read one byte at a time until the last byte ("\xdd") is received. This make it compatible with an 8 byte and 12 byte "ident". 2. The 4 bytes of the ident containing "\x01" are discarded to shorten the ident to the standard 8 byte length and to put the "ident" in the same format as the "ident" of the other radio models. Related to Bug #3063

1 0

[chirp_users] New member with a couple questions
by Glenn 16 Aug '16

16 Aug '16

Hi, My name is Glenn, I live in Nebraska. I have a UV-5R, and my son has a BF 8HP by Baofeng. I should mention that I am using Chirp on computers with a screenreader for the visually impaired. One computer is running Windows 7, and the other is running Ubuntu 16.04. I tried to connect the BF8HHP to my Ubuntu with the hopes of uploading all my programming from my 5R to it, and I keep getting the message: an error has occurred failure to communicate with radio serial object has no attribute 'setTimeout' I am using USB0 with a Baofeng cable. So with this issue, I switched to doing this on my Windows computer, but I don't like that much, because it is quite difficult using the program with a screenreader in Windows. But I successfully exported my 5R to a CSV file. Then I connected the 8HP and imported the 5R file, and then tried to upload it to the 8HP, and in the radio list, the make and model selections are grayed out, and it only shows the UV-5R. I tried to proceed with the upload anyway, but it would not let me. This is the steps for this procedure in the on-line help, even for two different radios. Maybe I missed something? Thanks for any assistance. Glenn

4 6

Re: [chirp_users] UV-82, Ubuntu 16.04 LTS, can't connect...
by Angus Ainslie 13 Aug '16

13 Aug '16

On 2016-08-06 08:09, David McGuire wrote: > python-serial: > Installed: 3.0.1-1 > Candidate: 3.0.1-1 > Version table: > *** 3.0.1-1 500 > 500 http://us.archive.ubuntu.com/ubuntu xenial/main amd64 > Packages > 500 http://us.archive.ubuntu.com/ubuntu xenial/main i386 > Packages > 100 /var/lib/dpkg/status > Please reply all when asking questions in the list That looks correct as well but chirp had an issue with pySerial v3 http://chirp.danplanet.com/issues/3167 So it looks like you need to update chirp

2 3

[chirp_users] New Daily Build
by Build System 13 Aug '16

13 Aug '16

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20160813 A list of the changes included in this build (since the last daily) follows: Changes for Build #423 [Tom Hayward <tom(a)tomh.us>] [RadioReference] Fix Chirp crash on empty scName attribute. #881

1 0

[chirp_users] Kenwood TK-762H
by Tim Billingsley 12 Aug '16

12 Aug '16

I have a couple of old Kenwood TK-762H transceivers. I see the issue on http://chirp.danplanet.com/issues/3139 but I seem to be having troubles. When I attempt to read from the radio using TK-762G it appears to read from the radio then dumps the error dialog *"An error has occurred: The radio doesn't accept program mode"* ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 884, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 517, in do_download _open_radio(radio, status) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760g.py", line 478, in _open_radio raise errors.RadioError("The radio doesn't accept program mode") RadioError: The radio doesn't accept program mode ERROR: ---------------- ERROR: Clone failed: The radio doesn't accept program mode ERROR: --- Exception Dialog: The radio doesn't accept program mode --- ERROR: None ERROR: ---------------------------- If I attempt using TK-760 chirp attmpts to read and almost immediately dumps the error dialog saying *"An error has occurred Radio refuse to enter into program mode after a few tries"* ERROR: ---------------------------- ERROR: -- Exception: -- ERROR: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/chirp/ui/clone.py", line 238, in run self.__radio.sync_in() File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 411, in sync_in self._mmap = do_download(self) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 255, in do_download open_radio(radio) File "/usr/lib/python2.7/dist-packages/chirp/drivers/tk760.py", line 227, in open_radio raise errors.RadioError(msg) RadioError: Radio refuse to enter into program mode after a few tries ERROR: ---------------- ERROR: Clone failed: Radio refuse to enter into program mode after a few tries ERROR: --- Exception Dialog: Radio refuse to enter into program mode after a few tries --- ERROR: None ERROR: ---------------------------- FWIW I am running CPU~Dual core AMD E2-1800 APU with Radeon HD Graphics (-MCP-) speed~1700 MHz (max) Kernel~4.2.0-34-generic i686 Mem~2035.9/3635.1MB HDD~750.2GB(35.9% used) Ubuntu 15.10 CHIRP daily-20160513 GTK 2.24.28 PyGTK 2.24.0 Python 2.7.10 I am also having issues with a QTY KT8900 I have tried to follow all this has been discussed on http://chirp.danplanet.com/issues/2673 but to no avail. any assistance is appreciated

8 18

[chirp_users] General: Updating CHIRP
by Richard B. Emerson 11 Aug '16

11 Aug '16

How are non-alpha/beta updates handled? That is, given all the daily releases (i.e., alpha testing), is there ever a "looks pretty stable to me" release? What I've got now does what I need done (very well - good on ya!). OTOH, a new release might do something useful that I don't have in the release I use. But I prefer not to do alpha or beta testing if I can avoid it. So... how often does a stable release come out? 73 de KC3DOO Rick

4 5

[chirp_users] yaesu ft 2800m
by fergy1 11 Aug '16

11 Aug '16

chirp just will not read header or communicate with radio tried ftdi cables plus serial cables chines cables 3 xp computers plus win 7 run chip check cables show up good radio goes to clone then comes up error chirp says cant read header error cables all work with ft 1802 all other radios program fine must be a weird ft 2800 been trying to program this radio for over 10 years tired of programming manually ill send the bug attachment if any one can figure out whats going on thanks --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

1 0

[chirp_users] removel of Plan
by bernard.dowley＠sky.com 11 Aug '16

11 Aug '16

Hi Using Chirp with either a Baofeng UV-5R or Intek KT 980HP is it possible to remove the 2 metre and 70 centimetre facility so that only the user programmed frequencies are available for use. Any help appreciated Regards BernieBernard Dowley

4 9

[chirp_users] Baofeng data to Yaesu
by djkwasny＠aol.com 11 Aug '16

11 Aug '16

Hi, I am trying to move Baofeng data to a Yaesu ft-7900R. If I load the Baofeng data into Chirp It selects Baofeng in the upload box and I cannot change it as it is grayed out. Any help anyone can provide will be appreciated. Thanks, Joe - K5WAS

5 5

Re: [chirp_users] General: Updating CHIRP
by Kc6iih＠aol.com 11 Aug '16

11 Aug '16

sometimes every day at other times it might be a week or more. they don't seem to have a set schedule. before I use CHIRP I check for any updates. Jock KC6IIH In a message dated 8/10/2016 6:20:17 P.M. Pacific Daylight Time, pavilion(a)pinefields.com writes: How are non-alpha/beta updates handled? That is, given all the daily releases (i.e., alpha testing), is there ever a "looks pretty stable to me" release? What I've got now does what I need done (very well - good on ya!). OTOH, a new release might do something useful that I don't have in the release I use. But I prefer not to do alpha or beta testing if I can avoid it. So... how often does a stable release come out? 73 de KC3DOO Rick _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] Baofeng to Yaesu
by djkwasny＠aol.com 10 Aug '16

10 Aug '16

I have tried to copy and paste, the copy goes fine but the paste doesn't. Without importing a file there is no grid to paste to. What am I missing. Thanks, Joe - K5WAS

2 1

Re: [chirp_users] B to Y
by Aubrey Turner 10 Aug '16

10 Aug '16

Doesn't really matter what's in the Yaesu but you have to download from it so that CHIRP understands its memory and settings layout. Once you have a tab with the Yaesu download data you can paste the data from the Baofeng into it. Then you can upload from the Yaesu tab to the Yaesu radio. On Aug 10, 2016 1:12 PM, "Kwas via chirp_users" < chirp_users(a)intrepid.danplanet.com> wrote: I have nothing in the Yaesu now. When I import a Baofeng the proplem is as explained in my first post. Joe _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Aubrey Turner at aubrey.c.turner(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

1 0

[chirp_users] B to Y
by djkwasny＠aol.com 10 Aug '16

10 Aug '16

I have nothing in the Yaesu now. When I import a Baofeng the proplem is as explained in my first post. Joe

1 0

[chirp_users] Yaesu FT-8900 Not Accepting File
by Deane Bouvier 09 Aug '16

09 Aug '16

The FT-8900 returns an error message that it doesn't ack block 0 when I try to write to it. That is after a successful read. The USB to serial device is operating properly and Chirp is pointed to the correct Com Port. OS is Windows 7. I have been successful before so this seems to be a new problem. Any help would be appreciated. Thanks. N5DQ

1 0

[chirp_users] ft 2800m
by Richard 09 Aug '16

09 Aug '16

radio keeps coming up failed to read header cable and everything works on my ft 1802 so cant be setup is their a bug or something wrong with the program it never did work for this radio fine with all my others thanks --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

2 1

[chirp_users] Baofeng UV-6R
by stephen johnston 09 Aug '16

09 Aug '16

i know this radio is not supported yet, i have some info to help driver writers. the "magic string" is: "\x50\xBB\xFF\x20\x14\x11\x22" and the firmware is: ["HDBF230"] i have put these into the driver, but i am now stuck with this: -------------------------- [2016-08-08 14:12:07,872] chirp.ui.mainapp - DEBUG: User selected Baofeng UV-6R on port /dev/ttyUSB0 [2016-08-08 14:12:07,912] chirp.ui.clone - DEBUG: Clone thread started [2016-08-08 14:12:07,916] chirp.drivers.uv5r - INFO: Sending Magic: 000: 50 bb ff 20 14 11 22 00 P.....". [2016-08-08 14:12:09,045] chirp.drivers.uv5r - INFO: Ident: 000: aa 36 74 04 00 05 20 dd .6t..... [2016-08-08 14:12:09,296] chirp.ui.reporting - INFO: Reporting disabled [2016-08-08 14:12:09,297] chirp.ui.reporting - DEBUG: Reporting is disabled [2016-08-08 14:12:09,297] chirp.ui.common - ERROR: -- Exception: -- [2016-08-08 14:12:09,297] chirp.ui.common - ERROR: Traceback (most recent call last): File "/home/user/Downloads/radio/chirp/chirp-daily-20160802/chirp/ui/clone.py", line 249, in run self.__radio.sync_in() File "/home/user/Downloads/radio/chirp/chirp-daily-20160802/chirp/drivers/uv5r.py", line 675, in sync_in self._mmap = _do_download(self) File "/home/user/Downloads/radio/chirp/chirp-daily-20160802/chirp/drivers/uv5r.py", line 491, in _do_download radio_version = _get_radio_firmware_version(radio) File "/home/user/Downloads/radio/chirp/chirp-daily-20160802/chirp/drivers/uv5r.py", line 467, in _get_radio_firmware_version block2 = _read_block(radio, 0x1F00, 0x40, False) File "/home/user/Downloads/radio/chirp/chirp-daily-20160802/chirp/drivers/uv5r.py", line 436, in _read_block "Radio refused to send second block 0x%04x" % start) RadioError: Radio refused to send second block 0x1f00 --------------------------- does anybody have any idea's what to try next? i dont know python and cant really follow the code in the driver anyway! -- stephen johnston

2 1

[chirp_users] Introduction & Question
by Richard B. Emerson 09 Aug '16

09 Aug '16

Hello - I'm new to 2m and just started groping my way into what I need to know. I've held a General ticket for a couple of years. However, my main interest is PACTOR comms via Winlink while aboard our sailboat (/MM or /C6A). We've been to the Bahamas few times; having Winlink to back up other options is great. I inherited a Baofeng UV-5RE Plus from a friend, sadly SK. At this point I'm able to program the radio, etc. My biggest concern is a way to organize the entries. That is, being NW of Philadelphia, I want the 2m repeaters for the counties/areas I'm most likely to be in. So far, so good. Repeater Book is my friend. But! Is there some way to tag a cluster of calls with at least the country name in some form? I guess I could add a two letter code to the back of each call, but if I'm missing a useful option...? 73 de KC3DOO Rick Emerson

6 8