- Users - lists.chirpmyradio.com

[chirp_users] Run VIP factory software v12.07.25
by William Thompson 16 Feb '17

16 Feb '17

I found this link chasing down a no transmit issue. Is it still a valid link? Run VIP factory softwarev12.07.25. 73, Bill KK4ZIU

2 1

[chirp_users] GMRS Brodcasting
by Donie Allen 14 Feb '17

14 Feb '17

I would like to use my Boafeng UV-5RA at work. We use the frequency. I can receive transmissions but I cannot transmit. I imported the GMRS frequencies from the Import from stock config menu item in CHIRP, and did not make Any changes to them. Any ideas on what setting I need to change? Sent from my Samsung Galaxy smartphone.

9 9

[chirp_users] Yaesu FT-270R (Eric Chopin)
by Eric Chopin 14 Feb '17

14 Feb '17

Thanks for the info Todd, I will give g4hfg a shot. 73's Eric

1 0

Re: [chirp_users] GMRS Brodcasting
by Jardy Dawson 14 Feb '17

14 Feb '17

Baofengs are not Part 95, most are not even Part 90 legal. The Boafengs MUST be used with a license of some sort, Part 97 Amateur or Part 90 Public Safety or business use. On February 13, 2017, at 4:33 PM, Chance Fulton <chance.fulton(a)gmail.com> wrote: Removable antennas are an frs thing. As long as they are part 95? type accepted and you are licensed, you are good. On Feb 13, 2017 7:19 PM, "kc6iih via chirp_users" <chirp_users(a)intrepid.danplanet.com> wrote: The Baeofeng radios are not legal for GMRS. One reason is they have remove able antennas. Jock KC6IIH Sent from my Samsung Galaxy Tab®|PRO -------- Original message -------- From: Donie Allen via chirp_users Date:02/13/2017 3:32 PM (GMT-08:00) To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] GMRS Brodcasting I would like to use my Boafeng UV-5RA at work. We use the frequency. I can receive transmissions but I cannot transmit. I imported the GMRS frequencies from the Import from stock config menu item in CHIRP, and did not make Any changes to them. Any ideas on what setting I need to change? Sent from my Samsung Galaxy smartphone. _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chance at chance.fulton(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 2

Re: [chirp_users] GMRS Brodcasting
by kc6iih 14 Feb '17

14 Feb '17

The Baeofeng radios are not legal for GMRS. One reason is they have remove able antennas. Jock KC6IIH Sent from my Samsung Galaxy Tab®|PRO -------- Original message -------- From: Donie Allen via chirp_users <chirp_users(a)intrepid.danplanet.com> Date:02/13/2017 3:32 PM (GMT-08:00) To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] GMRS Brodcasting I would like to use my Boafeng UV-5RA at work. We use the frequency. I can receive transmissions but I cannot transmit. I imported the GMRS frequencies from the Import from stock config menu item in CHIRP, and did not make Any changes to them. Any ideas on what setting I need to change? Sent from my Samsung Galaxy smartphone.

3 2

Re: [chirp_users] GMRS Brodcasting
by Jardy Dawson 14 Feb '17

14 Feb '17

In the US, yes. Check the FCC website for more info or go to www.miklor.com and check the FAQs. On February 13, 2017, at 4:11 PM, "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> wrote: Do you need a license for GMRS? > On 13 February 2017 at 18:32 Donie Allen via chirp_users <chirp_users(a)intrepid.danplanet.com> wrote: > > > I would like to use my Boafeng UV-5RA at work. We use the frequency. I can receive transmissions but I cannot transmit. I imported the GMRS frequencies from the Import from stock config menu item in CHIRP, and did not make Any changes to them. Any ideas on what setting I need to change? > > Sent from my Samsung Galaxy smartphone._______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

Re: [chirp_users] GMRS Brodcasting
by kc6iih 14 Feb '17

14 Feb '17

Yes to use GM you do need a license. Sent from my Samsung Galaxy Tab®|PRO -------- Original message -------- From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> Date:02/13/2017 4:09 PM (GMT-08:00) To: Donie Allen <donieallen1971(a)yahoo.com>,Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] GMRS Brodcasting Do you need a license for GMRS? > On 13 February 2017 at 18:32 Donie Allen via chirp_users <chirp_users(a)intrepid.danplanet.com> wrote: > > > I would like to use my Boafeng UV-5RA at work. We use the frequency. I can receive transmissions but I cannot transmit. I imported the GMRS frequencies from the Import from stock config menu item in CHIRP, and did not make Any changes to them. Any ideas on what setting I need to change? > > Sent from my Samsung Galaxy smartphone._______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Yaesu FT-270R
by Eric Chopin 13 Feb '17

13 Feb '17

Greetings Chirpers, I have a Yaesu FT-270R hand held and would like to program it either via CHIRP or another piece of software. I noticed in the CHIRP list of equipment, the FT-270R is not featured....does anyone know if another model would also communicate with this HH in the CHIRP archive? Thanks E

4 3

[chirp_users] New Daily Build
by Build System 12 Feb '17

12 Feb '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170212 A list of the changes included in this build (since the last daily) follows: Changes for Build #463 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-B5] Address "Radio NAK'd block at address 0x0f10" Error This patch works around the no ACK issue caused by the Baofeng UV-B5 and UV-B6 radios with 27 menus that do not support the Service Menu settings. related to #2109 and others.

1 0

[chirp_users] CB Freq. With Baofeng
by donieallen1971＠yahoo.com 12 Feb '17

12 Feb '17

Can Chirp be used to program the Baofeng UV-5RA with CB frequencies such as the popular channel 19? Sent from my U.S.Cellular© Tablet

8 9

[chirp_users] Help with Baofeng BF-F9V2+
by Todd Nine 12 Feb '17

12 Feb '17

Hi all, I've been using Chirp with my Baofeng UV-5R+, and it works great. I recently purchased a pair of BF-F9V2+ radios. I've attempted to perform Radio -> Download from radio, and select a Baofeng BF-F8HP. This seems to work. However, according to this issue, this specific type of radio should be supported. http://chirp.danplanet.com/issues/2511 I have the latest nightly, specifically revision 20170210, but this radio is not in my list. I'm using an OS X distribution. Is this the radio option I should be using, or is this radio type missing? Thanks, Todd

3 3

[chirp_users] Subject: Re: Trying to program a Yaesu FT60R with Mac OS 10.12.2
by Rick Rottman 11 Feb '17

11 Feb '17

Just a follow-up… I took the suggestions offered, tried them without success, then ordered the ~$20 “official” cable for the Yaesu line. Yesterday I hooked everything up and was able to successfully download my FT60R to Chirp, add frequencies and parameters, and then save and upload the file back to my HT. Worked great, the FT60R works like a charm. Thanks to everyone who took the time to respond and assist me! Rick R

1 0

[chirp_users] New Daily Build
by Build System 10 Feb '17

10 Feb '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170210 A list of the changes included in this build (since the last daily) follows: Changes for Build #462 [Tim Smith <hg(a)tds.xyz>] Fix app launching on OS X #4479 Running chirp .app bundles from ~/Downloads was observed to fail on recent versions of OS X. This is because a OS X security feature called App Translocation is actually executing the .app bundle from a temporary read-only disk image, and the chirp launch script attempts to modify the contents of the app bundle. This patch avoids modifying the .app bundle when App Translocation is active.

1 0

[chirp_users] BF 888S - side key function - Transmit Power
by BRIAN OXENHAM 09 Feb '17

09 Feb '17

Message: 3 Date: Wed, 8 Feb 2017 15:17:27 -0700 From: Trevor Holyoak <trevor(a)holyoak.com> Subject: Re: [chirp_users] BF 888S - side key function - Transmit Power To: r norris <rkmr15203(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <3fbb7e41-1ea0-389f-ae75-325d2bd1c768(a)holyoak.com> Content-Type: text/plain; charset=utf-8; format=flowed The BF-888S radios only have something like 16 channels, so that technique may not be as useful. On 2/8/2017 2:49 PM, r norris via chirp_users wrote: > Since I never see myself using 128 or however many memories these radio have, if I want different power or tone settings, > > I just put the same frequency in multiple memories, with different settings. > > ch 6 - 146.52 high power > ch 7 - 146.52 low power > ch 8 - 146.52 high power - tone on. > > Keep the same sequence for each frequency. > > Lot easier to change channels than remembering menu buttons. > > Same with scanning. If there is a channel that?s important, put it in the list every six or eight slots. > > The priority function on my UV2501 makes a ?click? in the speaker, every time it is checking the channel. Thanks Gents. Doubling up on the channels as described is the work around I have already adopted. The point is that there is a feature described both in the Chinglish manual and supported through CHIRP that just isn't working for the 12 handsets I have on the floor in front of me. For me a work around is adequate - others might have a different operating scenario where it is not possible. The engineer in me always wants to see things work as they should ! Regs Brian

1 0

[chirp_users] BF 888S - side key function - Transmit Power
by BRIAN OXENHAM 08 Feb '17

08 Feb '17

I am using daily build 2017126 to programme a standard baofeng BF888S. I can change the individual channel power settings through the Power column in the tabular Memories screen which is great. I have verified this actually works with a power meter. However I can't re-designate the Side Key Function as Transmit Power via the Settings screen. It does re-designate that key to the other functions when selected. Is that a software bug or operator error on my part ?

6 5

[chirp_users] BF 888S - side key function - Transmit Power
by BRIAN OXENHAM 08 Feb '17

08 Feb '17

On Tue, Feb 7, 2017 at 11:13 AM, BRIAN OXENHAM <brian.oxenham(a)btopenworld.com> wrote: > I am using daily build 2017126 to programme a standard baofeng BF888S. > > I can change the individual channel power settings through the Power column > in the tabular Memories screen which is great. I have verified this actually > works with a power meter. However I can't re-designate the Side Key Function > as Transmit Power via the Settings screen. It does re-designate that key to > the other functions when selected. > > Is that a software bug or operator error on my part ? > I just changed the setting of the side key using CHIRP and then read the radio using the factory software to confirm that the side key value was properly set. It was. Also after setting the side key function to Transmit Power, it is evident that the factory default Monitor setting is no longer available. Pressing the the side key now either causes the radio to emit 1 beep or 2 beeps. I assume the beeps tell the user what the power level was just switched to. I've checked this on 2 BF-888S radios. Jim KC9HI Thanks for the feedback Tom/Jim. Checked mine out again and my error is repeatable. Setting the side Key to Transmit Power just switches it off - no beeps, nothing. Perhaps I should just be grateful that I can actually change the power settings in the tabular memories screen. Too much to hope that there is a serial number on these handsets but they have a small white sticker with the number 8. B

1 0

[chirp_users] FM broadcast reception and Chirp
by Jim Pruitt 08 Feb '17

08 Feb '17

The current discussion brings up questions for me. I like to insert one or more FM broadcast stations in the 88-108mhz US FM band. The times I have inserted one of the station in a Chirp image it gets removed when uploaded to the radio. Am I making the entry wrong or will it not store it in one of the 128 memories? Thank you. Jim Pruitt

3 6

[chirp_users] Dongles ?
by Sarge ex 7thAF 08 Feb '17

08 Feb '17

I hope this is an acceptable question for this list. I don't know any other place to ask for this help. A local county emergency manager has told me about an inexpensive magic ( to me ) dongle type rf reciever that plugs into a usb port. It has a jack for an external antenna. Supposedly this device can recieve a huge amount of frequency spectrum AND trunked systems that also uses p25 digital signals. If anyone has links to this device that would give me the complete info on this thing, I would greatly appreciate you. Thanks In Advance. -- Sarge KE5YPB, Lickskillet, Texas "All it takes for evil to triumph is for good men to do nothing." " Lets Roll " ---- Todd Beemer--- 9/11/01 --- American Hero Are you going to take a stand to help America in 2016 ?

9 9

[chirp_users] AM RX on Chinese HTs
by Tim Billingsley 07 Feb '17

07 Feb '17

Does anyone know of one of the disposable Chinese radios that will handle airband AM receive 118-136 MHz ??

6 9

Re: [chirp_users] Dongles ?
by Bob Boehme 07 Feb '17

07 Feb '17

Yes there is one on the market that was originally intended for use as a European TV receiver but with free software it becomes a very wide band VHF/UHF receiver . There is also a add on board that you can purchase that adds HF capability.. interestingly enough it will work as a spectrum analyzer on a smart phone.. Nice little device. Bob W2IRI From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Sarge ex 7thAF Sent: Tuesday, February 7, 2017 6:24 AM To: Discussion of CHIRP Subject: [chirp_users] Dongles ? I hope this is an acceptable question for this list. I don't know any other place to ask for this help. A local county emergency manager has told me about an inexpensive magic ( to me ) dongle type rf reciever that plugs into a usb port. It has a jack for an external antenna. Supposedly this device can recieve a huge amount of frequency spectrum AND trunked systems that also uses p25 digital signals. If anyone has links to this device that would give me the complete info on this thing, I would greatly appreciate you. Thanks In Advance. -- Sarge KE5YPB, Lickskillet, Texas "All it takes for evil to triumph is for good men to do nothing." " Lets Roll " ---- Todd Beemer--- 9/11/01 --- American Hero Are you going to take a stand to help America in 2016 ?

2 1

[chirp_users] New Daily Build
by Build System 07 Feb '17

07 Feb '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170207 A list of the changes included in this build (since the last daily) follows: Changes for Build #461 [Tom Hayward <tom(a)tomh.us>] Use FM instead of NFM in North American bandplan. Fixes #4497 [Tim Smith <hg(a)tds.xyz>] Try harder to find resources. #4487 Search sys.prefix for data_files for compatibility with virtualenv installations and consolidate some of the resource-finding logic. [Tim Smith <hg(a)tds.xyz>] Set dock icon #4491 Set the dock icon when running from the command line. Depends on earlier patch for #4487. This isn't needed for the application bundle but is needed for other deployments. [Tim Smith <hg(a)tds.xyz>] Fix gtk-mac-integration module import #4489 The name of the Python module changed in 2011; https://github.com/jralls/gtk-mac-integration/commit/6788f82 The KK7DS runtime has an older version so both should be supported.

1 0

[chirp_users] FM radio reception for WOUXUN KG-UV8D
by Dallas W. Coffman 06 Feb '17

06 Feb '17

I'm told this radio will receive FM radio stations, but I cannot locate programming instructions. Can anyone help? Thanks! Dallas W. Coffman

2 1

Re: [chirp_users] Chirp incorrectly defaults to Narrow band on 220 mhz amateur band.
by Jardy Dawson 06 Feb '17

06 Feb '17

You are incorrect. Ham bands are wide band, 25 hz width compared to 12.5 wide narrow band for public safety/business use. We are not talking audio width, but frequency band width. Jardy Dawson WA7JRD Ham Radio Sent by hurling dead pigeons over the wall by trebuchet. -------------------------------------------- On Mon, 2/6/17, Nigel A. Gunn G8IFF/W8IFF <nigel(a)ngunn.net> wrote: Subject: Re: [chirp_users] Chirp incorrectly defaults to Narrow band on 220 mhz amateur band. To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Date: Monday, February 6, 2017, 11:59 AM All VHF/UHF amateur frequencies SHOULD be narrow band. The repeaters are. > On 06 February 2017 at 14:26 John Wilkerson <jl_wilkerson(a)att.net> wrote: > > > 1.25 M (220 Mhz) Amateur band incorrectly defaults to Narrow band. All > amateur frequencies are Wide band. Please correct. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] Chirp incorrectly defaults to Narrow band on 220 mhz amateur band.
by John Wilkerson 06 Feb '17

06 Feb '17

1.25 M (220 Mhz) Amateur band incorrectly defaults to Narrow band. All amateur frequencies are Wide band. Please correct.

7 18

[chirp_users] A digitized audio link called Chirp
by David Ranch 06 Feb '17

06 Feb '17

Just a heads up but I just saw this on the Fldigi group. No doubt, naming a product is difficult and an available name can be hard but these guys obviously didn't even try. A Google search for "chip" yields four of the top ten listings. --David KI6ZHD -------- Forwarded Message -------- Subject: [linuxham] A digitized audio link called Chirp Date: Sat, 4 Feb 2017 13:23:13 -0500 From: Reply-To: linuxham(a)groups.io To: linuxham(a)groups.io Not to confuse anyone but in addition to the free rig control app "Chirp" here now comes a digital audio link by the same name. https://www.newark.com/chirp-io-interview-internet-of-sound?COM=referral-ha… This looks interesting and it triggered the wanna-be Ham-MacGuyver in me. What if you could set any rig into vox mode and via mic & speaker hands-free QSO digi-mode from your Smartphone? (Or CW via Smartphone of Chirp-connected keyboard, or text-to-voice from the same?) What if you wanted to use the PA system in a park, stadium, function hall, EOC, field command post, Field Day, Hamfest, etc. to deliver digitized info to Smartphones (or other properly equipped devices with a microphone) - without the hassle of Bluetooth or Wifi linking? Interesting possibilities ... 73, DavidC KD4E

3 2

[chirp_users] Has anyone successfully programmed a Kenwood TM-D700 with Chirp?
by Rich Holtman 06 Feb '17

06 Feb '17

1) Has anyone successfully programmed a Kenwood TM-D700 with Chirp? 2) What cable did you use? 3) Does that cable connect to the 9-pin RS-232 on the radio, or the 6-pin mini DIN connector? Thank you, Rich Holtman KD9ANU

6 9

[chirp_users] Continued Trouble with Baofeng
by donieallen1971＠yahoo.com 06 Feb '17

06 Feb '17

I appreciate the advice from evetyone. I have tried making the programming changes to my UV-5RA. Unfortunately for me, I still have not been able to pick up anything. First, I setup channel 1 with the following settings for my local First Responders. Freq = 453.575000Tone Mode = TotalTone = 233.6Mode = NFM Second, I tried to setup channel 2 to our local repeater freq., which is 224.8000 with a "-" setting. But I receive the following error message: Error settingmemory: Frequency 224.800000 is out of supported range.Tx Freq 223.200000 is out of supported range As I have stated, I am new to programming scanners and I'm not sure what to do from here.

3 2

Re: [chirp_users] chirp_users Digest, Vol 98, Issue 5 reply to receptiion
by P² 05 Feb '17

05 Feb '17

Many ideas here that could solve your problem. Also, check to see if you enabled a tone squelch option that would not pass the audio unless the proper tone/code is set. For just plain reception, you would not need this.. From: "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> To: chirp_users(a)intrepid.danplanet.com Sent: Sunday, February 5, 2017 1:00 PM Subject: chirp_users Digest, Vol 98, Issue 5 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Baofeng Radio Help (Bill Gabbard) 2. Re: Baofeng Radio Help (George Cossey K5GOC) 3. Re: Baofeng Radio Help (bernard.dowley(a)sky.com) 4. Re: Baofeng Radio Help (Sarge ex 7thAF) ---------------------------------------------------------------------- Message: 1 Date: Sat, 4 Feb 2017 15:37:03 -0500 From: "Bill Gabbard" <wcgabbard1(a)windstream.net> Subject: Re: [chirp_users] Baofeng Radio Help To: "Donie Allen" <donieallen1971(a)yahoo.com>, "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <F835210907CF4459A447AAE867E90486@BillLTPC> Content-Type: text/plain; charset="utf-8" Donie, Had same happen here on my UV5R & finally found out that they either changed frequencies or went digital (P25, NAM, Etc. Tones). If they went Digital but stayed on same freq. all I'd hear was garbled audio................Bill ----- Original Message ----- From: Donie Allen via chirp_users To: chirp_users(a)intrepid.danplanet.com Sent: Saturday, February 04, 2017 2:41 PM Subject: [chirp_users] Baofeng Radio Help I have used CHIRP to program Baofeng UV5R with my local First Responder frequencies. However, I still cannot pick them up. Does anyone have any advice on what I am doing wrong or suggestions for me to try? ------------------------------------------------------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BillG226 at wcgabbard1(a)windstream.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Baofeng Radio Help
by Donie Allen 04 Feb '17

04 Feb '17

I have used CHIRP to program Baofeng UV5R with my localFirst Responder frequencies. However, I still cannot pick them up. Does anyonehave any advice on what I am doing wrong or suggestions for me to try?

6 5

Re: [chirp_users] Older Yaesu Radios
by Kenneth Strom VA3KRS 04 Feb '17

04 Feb '17

Just to let everyone know, if you do find an older Yaesu without the FTS-17A CTCSS Tone Board (long unavailable) they are being remanufactured in China, for around $25.00 USD shipped. The same one used in Mobiles and HTs, it was an (expensive) option as few Repeaters used it at the time 20 years ago, most having just switched over from AM to FM Mode and most Ham radios were converted single-channel Crystal radios. Rather expensive to change Channels at around $30.00/pair. No 1.000-channel radios existed then... Kenneth Strom VA3KRS ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: February 3, 2017 3:00 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 98, Issue 3 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: chirp_users Digest, Vol 98, Issue 2 (Steve Forcier) 2. Re: chirp_users Digest, Vol 98, Issue 2 (dbarlow_2000(a)yahoo.com) 3. Advice? (Hans White) 4. Re: Advice? (Douglas Haviland) 5. Re: Advice? (John Wilkerson) 6. Re: Advice? (Tom Hayward) 7. difference between FT-1802 and FT-1802M???? (clowery(a)va.net) 8. Re: difference between FT-1802 and FT-1802M???? (nigel(a)forges.ca) 9. Re: difference between FT-1802 and FT-1802M???? (Tom Hayward) 10. Re: difference between FT-1802 and FT-1802M???? (clowery) 11. Re: difference between FT-1802 and FT-1802M???? (Tom Hayward) ---------------------------------------------------------------------- Message: 1 Date: Thu, 2 Feb 2017 14:20:03 -0700 From: "Steve Forcier" <steve4cr(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 98, Issue 2 To: <chirp_users(a)intrepid.danplanet.com> Message-ID: <000901d27d9a$1fc8bad0$5f5a3070$@com> Content-Type: text/plain; charset="us-ascii" Rugged 5R & Baofeng 5R are identical. I have exported the memories to a csv and pasted and uploaded to a uv5r with no issues Steve -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of chirp_users-request(a)intrepid.danplanet.com Sent: Thursday, February 2, 2017 1:00 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 98, Issue 2 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Rugged vs Baoffeng (Jim Unroe) 2. Re: Rugged vs Baoffeng (Mark H. Harris) 3. Re: Rugged vs Baofeng (Dave Sunde) 4. Re: Rugged vs. Baofeng (John LaMartina) 5. Re: Rugged vs Baoffeng (Jim Unroe) 6. Re: help importing file (Jeff Widen) 7. Re: Rugged vs Baoffeng (John Wilkerson) 8. Re: help importing file (Benton) 9. Re: Rugged vs Baoffeng (Mark H. Harris) 10. Re: help importing file (Jeff Widen) 11. Re: help importing file (Jim Unroe) ---------------------------------------------------------------------- Message: 1 Date: Wed, 1 Feb 2017 15:02:56 -0500 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Rugged vs Baoffeng To: dbarlow_2000(a)yahoo.com, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U5GkDMwA=tASTcR9RFvShgybzFXnJtiD-LMdMKZqo1xmA(a)mail.gmail.com> Content-Type: text/plain; charset=UTF-8 On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users <chirp_users(a)intrepid.danplanet.com> wrote: > I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3. > What I would like to know are they the same? and and if so can I use > chirp on my Rugged? as it is not listed on the support list. > > Thanks Do you know where I can get a copy of the "factory" programming software? Jim ------------------------------ Message: 2 Date: Wed, 1 Feb 2017 14:14:37 -0600 From: "Mark H. Harris" <harrismh777(a)gmail.com> Subject: Re: [chirp_users] Rugged vs Baoffeng To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAFq9LpkArusrohmRDaho0gKso8_u0M6zvx8XnioTg-EsEtFuAw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" The thing about clones is that you can never be sure how "cloned" they are. On Wed, Feb 1, 2017 at 2:02 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users > <chirp_users(a)intrepid.danplanet.com> wrote: > > I have a Rugged RH-5R that looks to be the same radio as a Baoffeng > UV-5X3. > > What I would like to know are they the same? and and if so can I use > chirp > > on my Rugged? as it is not listed on the support list. > > > > Thanks > > Do you know where I can get a copy of the "factory" programming software? > > Jim > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to marcus at harrismh777(a)gmail.com To > unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- Kind regards, Mark H. Harris

1 0

Re: [chirp_users] Yaesu FT-1802M Mobile Radio
by Kenneth Strom VA3KRS 04 Feb '17

04 Feb '17

Regarding the Yaesu FT-1802M, the "M" merely stands for Mobile radio. There may be a difference in the Euro version to the North American one, although usually there is a "E" after the Model name (for European Version). The "A" versions are for the Americas as we have a wider VHF section, same as UHF. I own a FT-3000M which is slightly different in specifications, both being High-Power VHF radios, yours is 50W, mine 65W output. The Euro versions will only TX 144-146 MHz, ours to 148 MHz, and the wide-band modification is quite simple. If you live out in the Countryside, the higher TX output you will really appreciate, just make sure your antenna will handle it and use a 5/8, and please due to the power wire it directly to your Battery or PS. The Official Yaesu Website has all the details on this Radio. Kenneth Strom VA3KRS C3023593 ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: February 3, 2017 3:00 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 98, Issue 3 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: chirp_users Digest, Vol 98, Issue 2 (Steve Forcier) 2. Re: chirp_users Digest, Vol 98, Issue 2 (dbarlow_2000(a)yahoo.com) 3. Advice? (Hans White) 4. Re: Advice? (Douglas Haviland) 5. Re: Advice? (John Wilkerson) 6. Re: Advice? (Tom Hayward) 7. difference between FT-1802 and FT-1802M???? (clowery(a)va.net) 8. Re: difference between FT-1802 and FT-1802M???? (nigel(a)forges.ca) 9. Re: difference between FT-1802 and FT-1802M???? (Tom Hayward) 10. Re: difference between FT-1802 and FT-1802M???? (clowery) 11. Re: difference between FT-1802 and FT-1802M???? (Tom Hayward) ---------------------------------------------------------------------- Message: 1 Date: Thu, 2 Feb 2017 14:20:03 -0700 From: "Steve Forcier" <steve4cr(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 98, Issue 2 To: <chirp_users(a)intrepid.danplanet.com> Message-ID: <000901d27d9a$1fc8bad0$5f5a3070$@com> Content-Type: text/plain; charset="us-ascii" Rugged 5R & Baofeng 5R are identical. I have exported the memories to a csv and pasted and uploaded to a uv5r with no issues Steve -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of chirp_users-request(a)intrepid.danplanet.com Sent: Thursday, February 2, 2017 1:00 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 98, Issue 2 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Rugged vs Baoffeng (Jim Unroe) 2. Re: Rugged vs Baoffeng (Mark H. Harris) 3. Re: Rugged vs Baofeng (Dave Sunde) 4. Re: Rugged vs. Baofeng (John LaMartina) 5. Re: Rugged vs Baoffeng (Jim Unroe) 6. Re: help importing file (Jeff Widen) 7. Re: Rugged vs Baoffeng (John Wilkerson) 8. Re: help importing file (Benton) 9. Re: Rugged vs Baoffeng (Mark H. Harris) 10. Re: help importing file (Jeff Widen) 11. Re: help importing file (Jim Unroe) ---------------------------------------------------------------------- Message: 1 Date: Wed, 1 Feb 2017 15:02:56 -0500 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Rugged vs Baoffeng To: dbarlow_2000(a)yahoo.com, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U5GkDMwA=tASTcR9RFvShgybzFXnJtiD-LMdMKZqo1xmA(a)mail.gmail.com> Content-Type: text/plain; charset=UTF-8 On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users <chirp_users(a)intrepid.danplanet.com> wrote: > I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3. > What I would like to know are they the same? and and if so can I use > chirp on my Rugged? as it is not listed on the support list. > > Thanks Do you know where I can get a copy of the "factory" programming software? Jim ------------------------------ Message: 2 Date: Wed, 1 Feb 2017 14:14:37 -0600 From: "Mark H. Harris" <harrismh777(a)gmail.com> Subject: Re: [chirp_users] Rugged vs Baoffeng To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAFq9LpkArusrohmRDaho0gKso8_u0M6zvx8XnioTg-EsEtFuAw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" The thing about clones is that you can never be sure how "cloned" they are. On Wed, Feb 1, 2017 at 2:02 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users > <chirp_users(a)intrepid.danplanet.com> wrote: > > I have a Rugged RH-5R that looks to be the same radio as a Baoffeng > UV-5X3. > > What I would like to know are they the same? and and if so can I use > chirp > > on my Rugged? as it is not listed on the support list. > > > > Thanks > > Do you know where I can get a copy of the "factory" programming software? > > Jim > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to marcus at harrismh777(a)gmail.com To > unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- Kind regards, Mark H. Harris

1 0

[chirp_users] difference between FT-1802 and FT-1802M????
by clowery＠va.net 04 Feb '17

04 Feb '17

can not get chirp to read my FT-1802 is there a difference between it and a 1802M? NM4V

4 3

Re: [chirp_users] difference between FT-1802 and FT-1802M????
by clowery 03 Feb '17

03 Feb '17

When I try to read the radio it does not identify the model number correctly. It sees that the radio is a Yaesu but the wrong one. Sent from my Verizon Wireless 4G LTE smartphone -------- Original message -------- From: Tom Hayward <tom(a)tomh.us> Date: 02/03/2017 1:18 AM (GMT-05:00) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] difference between FT-1802 and FT-1802M???? If you have an FT-1802, give it a try with Chirp's FT-1802M driver. I wrote it and I only had an FT-1802M to test it with. I can't tell you if the FT-1802 is any different because I've never touched one. They could be exactly the same. What I would do to test it is manually enter a few memory channels in the FT-1802. Then download into Chirp and make sure those channels are where they're supposed to be (channel 1 is channel 1, etc.) and that all the frequencies and tones are correct. If it all looks good then there's probably no change to the memory layout between FT-1802 and FT-1802M. Tom KD7LXL On Thu, Feb 2, 2017 at 6:00 PM, clowery(a)va.net <clowery(a)va.net> wrote: > can not get chirp to read my FT-1802 is there a difference between it > and a 1802M? > > NM4V > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Tom KD7LXL at esarfl(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Charles Lowery at clowery(a)va.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] Advice?
by Hans White 02 Feb '17

02 Feb '17

Looking for some advice I work for a small private security company that is just starting up. For some of our jobs we need radios, so I purchased some Baofeng UV- 5R to use mainly because the price. What is the best way to get the most range from these radios? Thanks Hans

4 3

Re: [chirp_users] chirp_users Digest, Vol 98, Issue 2
by Steve Forcier 02 Feb '17

02 Feb '17

Rugged 5R & Baofeng 5R are identical. I have exported the memories to a csv and pasted and uploaded to a uv5r with no issues Steve -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of chirp_users-request(a)intrepid.danplanet.com Sent: Thursday, February 2, 2017 1:00 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 98, Issue 2 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Rugged vs Baoffeng (Jim Unroe) 2. Re: Rugged vs Baoffeng (Mark H. Harris) 3. Re: Rugged vs Baofeng (Dave Sunde) 4. Re: Rugged vs. Baofeng (John LaMartina) 5. Re: Rugged vs Baoffeng (Jim Unroe) 6. Re: help importing file (Jeff Widen) 7. Re: Rugged vs Baoffeng (John Wilkerson) 8. Re: help importing file (Benton) 9. Re: Rugged vs Baoffeng (Mark H. Harris) 10. Re: help importing file (Jeff Widen) 11. Re: help importing file (Jim Unroe) ---------------------------------------------------------------------- Message: 1 Date: Wed, 1 Feb 2017 15:02:56 -0500 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Rugged vs Baoffeng To: dbarlow_2000(a)yahoo.com, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U5GkDMwA=tASTcR9RFvShgybzFXnJtiD-LMdMKZqo1xmA(a)mail.gmail.com> Content-Type: text/plain; charset=UTF-8 On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users <chirp_users(a)intrepid.danplanet.com> wrote: > I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3. > What I would like to know are they the same? and and if so can I use > chirp on my Rugged? as it is not listed on the support list. > > Thanks Do you know where I can get a copy of the "factory" programming software? Jim ------------------------------ Message: 2 Date: Wed, 1 Feb 2017 14:14:37 -0600 From: "Mark H. Harris" <harrismh777(a)gmail.com> Subject: Re: [chirp_users] Rugged vs Baoffeng To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAFq9LpkArusrohmRDaho0gKso8_u0M6zvx8XnioTg-EsEtFuAw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" The thing about clones is that you can never be sure how "cloned" they are. On Wed, Feb 1, 2017 at 2:02 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Wed, Feb 1, 2017 at 1:07 PM, dbarlow_2000--- via chirp_users > <chirp_users(a)intrepid.danplanet.com> wrote: > > I have a Rugged RH-5R that looks to be the same radio as a Baoffeng > UV-5X3. > > What I would like to know are they the same? and and if so can I use > chirp > > on my Rugged? as it is not listed on the support list. > > > > Thanks > > Do you know where I can get a copy of the "factory" programming software? > > Jim > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to marcus at harrismh777(a)gmail.com To > unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- Kind regards, Mark H. Harris

2 1

Re: [chirp_users] help importing file
by Jeff Widen 02 Feb '17

02 Feb '17

I have tried changing the column headers to match those in the stock files. When I do it seems to recognize the file but it then says no channels found. If I change the location column back to channel it does not recognize the file. Why can't find any channels? Does the order of the column matter? Here are the column headers: Location Frequency Offset Duplex Mode Name Show Name Tone Mode Tone DCS Tx Power Skip Step Thanks for the help, Jeff -------------------------------------------- On Wed, 2/1/17, Benton <benton(a)siletzbay.com> wrote: Subject: Re: [chirp_users] help importing file To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Date: Wednesday, February 1, 2017, 7:28 PM On 2017-02-01 09:31, Tom Hayward wrote: > If you share the file, I can point out why it's unrecognized. It most > likely does not have the column header/labels Chirp is looking for, or > the data in those columns is of the wrong format. 'Back in the day' I thought one of the issues with using Excel to process csv file and Chirp was that Excel tended to truncate trailing commas for empty fields whereas Chirp was a stickler for those being in place to make the columns line up correctly. Am I misremembering or have either of those issues been improved? Benton 1feb17 -- KF7QLP benton(a)siletzbay.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to dftd3(a)yahoo.com at dftd3(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] Rugged vs Baoffeng
by dbarlow_2000＠yahoo.com 02 Feb '17

02 Feb '17

I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3. What I would like to know are they the same? and and if so can I use chirp on my Rugged? as it is not listed on the support list. Thanks

4 5

[chirp_users] help importing file
by Jeff Widen 02 Feb '17

02 Feb '17

I have saved a frequency list in excel as a csv file. When I try to import it into Chirp it says it does not recognize the file type. I just downloaded Chirp so I have the most current version for windows. Any help would be appreciated. Jeff

6 5

Re: [chirp_users] help importing file
by Jeff Widen 02 Feb '17

02 Feb '17

Bill I believe what you say is true, but you don't have to change the file you downloaded from the radio. You can upload a different file, one of the stock files in chirp or one you have created. Jeff -------------------------------------------- On Wed, 2/1/17, penningsbill(a)gmail.com <penningsbill(a)gmail.com> wrote: Subject: Re: [chirp_users] help importing file To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Date: Wednesday, February 1, 2017, 9:25 AM #yiv2332876555 v\00003a* { } I have not used it yet but I believe that you have to export first from your radio to your computer. That establish a contact between the computer and your radio. Then change the spreadsheet, that is a part of Chirp, enter all your frequencies and then import that spreadsheet into your radio. Please let me know if that works as I have ordered a beaufang from China and I will have to do that too. Bill VE7BMQ -------Original Message------- From: Judith Barrett Date: 01/02/2017 9:17:20 AM To: Discussion of CHIRP Subject: Re: [chirp_users] help importing file Just a clarification because I'm doing the same thing - after I copy/paste into the radio csv file, and save it as a csv file, then I import that csv file using Chirp. Am I importing to Chirp or using Chirp to import to the radio? On Wed, Feb 1, 2017 at 6:10 AM, Amnon Zohar <amnon.zohar(a)gmail.com> wrote: Do not create the frequency list in exel! Download the image from the radio export it to csv file , edit it using exel and import that file. בתאריך 1 בפבר' 2017 13:06,‏ "Jeff Widen via chirp_users" <chirp_users@intrepid. danplanet.com> כתב: I have saved a frequency list in excel as a csv file. When I try to import it into Chirp it says it does not recognize the file type. I just downloaded Chirp so I have the most current version for windows. Any help would be appreciated. Jeff ______________________________ _________________ chirp_users mailing list chirp_users(a)intrepid.danplanet .com http://intrepid.danplanet.com/ mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com ______________________________ _________________ chirp_users mailing list chirp_users@intrepid. danplanet.com http://intrepid.danplanet.com/ mailman/listinfo/chirp_users This message was sent to Judith at wcchick(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com -- Have I not commanded you? Be strong and courageous. Do not be afraid; do not be discouraged, for the Lord your God will be with you wherever you go. Joshua 1:9 My blog http://goodforthecorn.wordpress.com/ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to penningsbill(a)gmail.com at penningsbill(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com This email has been checked for viruses by Avast antivirus software. www.avast.com -----Inline Attachment Follows----- _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to dftd3(a)yahoo.com at dftd3(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

Re: [chirp_users] Rugged vs Baofeng
by Dave Sunde 01 Feb '17

01 Feb '17

The manual is here: https://www.ruggedradios.com/PDF/Rugged-RH-5R-manual.pdf Dave Sunde D&G Enterprises Senior Engineer 1-509-486-1547 Home Office 1-206-930-3887 Cell Phone From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of dbarlow_2000--- via chirp_users Sent: Wednesday, February 1, 2017 10:07 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Rugged vs Baoffeng I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3. What I would like to know are they the same? and and if so can I use chirp on my Rugged? as it is not listed on the support list. Thanks

2 1

Re: [chirp_users] Rugged vs Baofeng
by Dave Sunde 01 Feb '17

01 Feb '17

For around 30 bucks they work well. On eBay you can buy a battery eliminator and larger batteries. The larger batteries have a charging port on them but I’m not sure if you can run the radio and charge at the same time. You can get a battery case that holds 6 AA's if you want. I would pick up a programing cable for 10 bucks and use the free "chrip" programing software. Dave Sunde D&G Enterprises Senior Engineer 1-509-486-1547 Home Office 1-206-930-3887 Cell Phone From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of dbarlow_2000--- via chirp_users Sent: Wednesday, February 1, 2017 10:07 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Rugged vs Baoffeng I have a Rugged RH-5R that looks to be the same radio as a Baoffeng UV-5X3. What I would like to know are they the same? and and if so can I use chirp on my Rugged? as it is not listed on the support list. Thanks

1 0

[chirp_users] Need very basic help
by D PF 01 Feb '17

01 Feb '17

I have Baofeng BF-888S plus just bought H.R.G. PC03 FTDI USB Programming Cable for Jingtong, BaoFeng<https://www.amazon.com/gp/product/B01NAQBXK4/ref=oh_aui_detailpage_o01_s00?…>. I downloaded the chirp software and wouldlike to know how to program the devices so I don't mess with emergency systems, etc. Sadly, I need extremely straightforward step by step instructions. Thank you, Striver

2 1

Re: [chirp_users] chirp_users Digest, Vol 97, Issue 26
by Jim Self 31 Jan '17

31 Jan '17

Hell. Thanks for the help? DownloSding the .32 driver worked. Bf f9v2+ programmed just fine. Turn Social Media and TV News off and all of the pain in the world goes away. You're welcome. On Jan 31, 2017 3:00 PM, <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE) (Thomas James) > 2. Re: PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE) (TC) > 3. Re: PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE) > (Tom Balaban) > 4. Re: PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE) > (David Wilson) > 5. Re: PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE) (John) > 6. Re: PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE) > (Rich Messeder) > 7. Re: PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE) > (Trevor Holyoak) > 8. Re: PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE) > (Tom Hayward) > 9. Re: Trying to program a Yaesu FT60R with Mac OS 10.12.2 > (John Schubert) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 30 Jan 2017 12:10:15 -0800 > From: Thomas James <thomasjames.mail(a)gmail.com> > Subject: [chirp_users] PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH > NOTICE) > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <D2DD31D2-AD9D-4D8C-A245-D176876B457F(a)gmail.com> > Content-Type: text/plain; charset=us-ascii > > PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE)! > > Thank you, > > > Thomas James > thomasjames.mail(a)gmail.com > > > > > ------------------------------ > > Message: 2 > Date: Mon, 30 Jan 2017 20:16:42 +0000 > From: TC <imprtc(a)gmail.com> > Subject: Re: [chirp_users] PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH > NOTICE) > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAHcadyMFcqv8TuC2ee4Qne1TbkC_Qc-ikXcGsRWuro51fRMWtA@mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > Aside from this, I do not send any emails on/from here I too have made > multiple requests to be removed. Sorry I can't be of more help. > > On Mon, Jan 30, 2017 at 3:10 PM Thomas James <thomasjames.mail(a)gmail.com> > wrote: > > > PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE)! > > > > Thank you, > > > > > > Thomas James > > thomasjames.mail(a)gmail.com > > > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Tony at imprtc(a)gmail.com > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > -- > Tony C >

1 0

Re: [chirp_users] Trying to program a Yaesu FT60R with Mac OS 10.12.2
by John Schubert 31 Jan '17

31 Jan '17

I have read numerous articles that say Apple did a total rewrite of the USB driver for El Capitan. :-/ For me, updating to El Capitan, definitely broke some USB devices, but not USB to chirp. You said "When I connect the programming cable to my powered USB hub...". Were you using the hub when trying to program? I would recommend connecting directly to the computer... John On 1/30/17 12:00 PM, Rick Rottman wrote: > Message: 1 > Date: Sun, 29 Jan 2017 15:04:41 -0800 > From: Rick Rottman <rottman.rick(a)gmail.com> > Subject: [chirp_users] Trying to program a Yaesu FT60R with Mac OS > 10.12.2 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <559FCA15-12C7-4543-8095-39296F6E1F83(a)gmail.com> > Content-Type: text/plain; charset=utf-8 > > Hi, > > I am new to this and trying to program my Yaesu FT60R. > I have an iMac running OS 10.12.2 (Sierra). > I purchased a 6 in 1 programming cable for the FT60R (among many other models) from Yihao Weiye Electronics Co. LTD, via Amazon. > I have installed KK7DS Python Runtime R10 on my Mac. > I have tried downloading a few FTDI drivers. > I can install and open Chirp-daily 2016-12-20, but not chirp-daily-20170126. > When I connect the programming cable to my powered USB hub, System Information recognizes it as: > USB Serial Controller > product ID: 0x2303 > vendor ID: 0x067b (Prolific Tech. Inc) > version 3.00 > plus other info? > > I connect radio to computer via cable, power up radio into clone mode, select ?download from radio? (both with and without opening new file), > then select Yaesu and FT60 from the popup menu, which lists the port as: /dev/cu.SLAB_USBtoUART. > I push the PTT key for a second until my radio shows ?tx? then release. > After a few seconds chirp gives me the message: ?An error has occurred, Failed to communicate with radio: Radio is not responding. > > I've tried this multiple times. Any suggestions or assistance would be much appreciated! > Thanks > Rick Rottman

1 0

[chirp_users] PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE)
by Thomas James 30 Jan '17

30 Jan '17

PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE)! Thank you, Thomas James thomasjames.mail(a)gmail.com

7 6

Re: [chirp_users] PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE)
by Rich Messeder 30 Jan '17

30 Jan '17

Though I have not tried it, I believe that following the instructions in the post below --- To unsubscribe --- and using the email that you wish to unsub as the sending email --- should do the trick. You can do it yourself in a few keystrokes. Unsub info is included with each original message. ~R~ On 2017-01-30 20:16:+0000, TC wrote: >Aside from this, I do not send any emails on/from here I too have made multiple requests to be removed. Sorry I can't be of more help. > >On Mon, Jan 30, 2017 at 3:10 PM Thomas James <<mailto:thomasjames.mail@gmail.com>thomasjames.mail(a)gmail.com> wrote: >PLEASE REMOVE ME FROM YOUR E-MAIL LIST (4TH NOTICE)! > >Thank you, > > >Thomas James ><mailto:thomasjames.mail@gmail.com>thomasjames.mail(a)gmail.com > > >_______________________________________________ >chirp_users mailing list ><mailto:chirp_users@intrepid.danplanet.com>chirp_users(a)intrepid.danplanet.com >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Tony� at <mailto:imprtc@gmail.com>imprtc(a)gmail.com >To unsubscribe, send an email to <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>chirp_users-unsubscribe(a)intrepid.danplanet.com > >-- >Tony C >_______________________________________________ >chirp_users mailing list >chirp_users(a)intrepid.danplanet.com >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to WeatheredSoul at rich.messeder(a)gmail.com >To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Yaesu FT-891
by Jack 30 Jan '17

30 Jan '17

Will Chirp program the FT-891? Tnx, Jack W4GRJ

2 1

[chirp_users] Trying to program a Yaesu FT60R with Mac OS 10.12.2
by Rick Rottman 30 Jan '17

30 Jan '17

Hi, I am new to this and trying to program my Yaesu FT60R. I have an iMac running OS 10.12.2 (Sierra). I purchased a 6 in 1 programming cable for the FT60R (among many other models) from Yihao Weiye Electronics Co. LTD, via Amazon. I have installed KK7DS Python Runtime R10 on my Mac. I have tried downloading a few FTDI drivers. I can install and open Chirp-daily 2016-12-20, but not chirp-daily-20170126. When I connect the programming cable to my powered USB hub, System Information recognizes it as: USB Serial Controller product ID: 0x2303 vendor ID: 0x067b (Prolific Tech. Inc) version 3.00 plus other info… I connect radio to computer via cable, power up radio into clone mode, select “download from radio” (both with and without opening new file), then select Yaesu and FT60 from the popup menu, which lists the port as: /dev/cu.SLAB_USBtoUART. I push the PTT key for a second until my radio shows “tx” then release. After a few seconds chirp gives me the message: “An error has occurred, Failed to communicate with radio: Radio is not responding. I've tried this multiple times. Any suggestions or assistance would be much appreciated! Thanks Rick Rottman

2 1

[chirp_users] Any tricks to programming Kenwood TM-D700 with Chirp?
by Rich Holtman 29 Jan '17

29 Jan '17

Hi Everyone, What does it take to get the DM-700 to cooperate? I have a new USB-63 cable from RT Systems, downloaded the driver first and successfully, but I cannot download any data from the DM-700. Com port is 8. When downloading from radio, when I click 'OK', nothing happens at all. I don't know if this is a clue, but the second time I try to download, I get an error message "could not open port COM8: [Error 5] Access is denied." I have previously used Chirp on a Kenwood TM-V71A, and for a couple of Baofengs. Thanks, Rich Holtman

2 1

Re: [chirp_users] chirp_users Digest, Vol 97, Issue 23
by P² 28 Jan '17

28 Jan '17

I have a TYT TH-9800 which does quad band (10, 6, 2, 440) FM that also has AM RX on 118-136 and 27 (but TX FM). It is mobile sized. From: "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> To: chirp_users(a)intrepid.danplanet.com Sent: Saturday, January 28, 2017 1:00 PM Subject: chirp_users Digest, Vol 97, Issue 23 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. AM RX on Chinese HTs (Tim Billingsley) 2. Re: AM RX on Chinese HTs (Jardy) 3. Re: AM RX on Chinese HTs (Eddie Pike) 4. Re: AM RX on Chinese HTs (Stan M) ---------------------------------------------------------------------- Message: 1 Date: Sat, 28 Jan 2017 02:26:42 +0000 From: Tim Billingsley <kd5ckp(a)gmail.com> Subject: [chirp_users] AM RX on Chinese HTs To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAG82UfDDWsP6Vk0j7=TgfsJvBeyaEEaLFbF7hD8DiSjBLv+_CA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" ?Does anyone know of one of the disposable Chinese radios that will handle airband AM receive 118-136 MHz ??

1 0