- Users - lists.chirpmyradio.com

[chirp_users] New Daily Build
by Build System 29 Mar '17

29 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170329 A list of the changes included in this build (since the last daily) follows: Changes for Build #472 [Tom Hayward <tom(a)tomh.us>] Wait until typing is complete to save RadioSettingValueString. Fixes #4675

1 0

[chirp_users] Yaesu FT50R
by Lamar Brown 28 Mar '17

28 Mar '17

I have a Yaesu FT-50R and I can't program because the Chirp program I have that is the latest download (daily 2017324) doesn't show the FT-50R. I have been told that it is on the latest download but I haven't found it. Also I have try downloading Chirp on my new computer that has Window's 10 on it. It goes to the download file but it don't fully load up on the computer. Any suggestions will be greatly appreciated. Lamar

3 3

Re: [chirp_users] chirp_users Digest, Vol 99, Issue 21
by tom 28 Mar '17

28 Mar '17

Hello Ladies and Gentlemen: Our local dollar store had a very robust 3.5 mm 4 contact extension about 4 ft long ( $2.00 only ). Just cut in half and connect to CP2102 USB to Serial converter and it works like a charm. Beware of the thinner cables, cause the individual wires inside are too thin and flimsy Best regards, Tom VE3KZJ On 03/28/2017 03:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > Message: 2 > Date: Mon, 27 Mar 2017 16:02:20 -0400 (EDT) > From: "Nigel A. Gunn G8IFF/W8IFF"<nigel(a)ngunn.net> > Subject: Re: [chirp_users] (no subject) > To: Discussion of CHIRP<chirp_users(a)intrepid.danplanet.com> > Message-ID:<497589491.304928.1490644941354(a)email.1and1.com> > Content-Type: text/plain; charset=UTF-8 > > Needs a 3.5mm 4 contact jack plug in the mic/ear socket. > Use the outermost ring and sleeve. -- It's always easier to order from a short menu than a long one

1 0

[chirp_users] (no subject)
by Lamar Brown 27 Mar '17

27 Mar '17

Have a Yaesu FT-50R but I see chirp doesn't cover it. But I see it on the list. What do I need to get to work for me. Lamar

6 5

[chirp_users] 3 Issues - BTech UV-50X2
by Doc Stevens 27 Mar '17

27 Mar '17

This new rig is excellent but a few quirks remain. I am using the latest build of CHIRP. 1.. CHIRP Settings Tab, Basic Settings, allows selection of Display Mode for A, B, C, & D. Options are frequency, channel, or name. This works once uploaded to radio. However, when radio powered down and restarted the display defaults to what ever is in the first channel programmed in CHIRP (memory channel zero or one as shown in CHIRP). Display A is always what CHIRP shows in Basic Settings tab but display B, C, & D are what is in the first channel programmed in CHIRP. Is this a radio issue or CHIRP issue? If CHIRP, does anyone know the fix? 2.. Under Settings Tab, Work Mode Settings, menu item Display, you can select A, B, C, or D. I have selected A. If I choose another display does not seem to make a difference. Any one know what this does? 3.. Under Settings Tab, Work Mode Settings, there are menu items VFO/MR mode, MR channel, & VFO frequency. You can choose options for each. Any one know what these options do? How are they different from the Display options in Basic Settings tab? When I change these don't see a change on radio. I bet I'm missing something on each of these. The learning curve on this rig is short but there are some odd things to decode. My thanks to all. 73 KW4DOC

2 1

[chirp_users] Password issues and CW/SSB cross-mode issue
by David A. Behar 27 Mar '17

27 Mar '17

*Password issues.* I used the "lost password" feature to change my password... but I still can't log in with the new password. Any ideas? *Issue re Yaesu FT-857 and FT-857D.* I'm using a Yaesu FT-857D w/MARS mod, so I (successfully) use the FT-857 radio option. On a few channels I programmed the radio for split mode -- i.e., transmit on CW on a carrier about 2 KHz lower than the suppressed LSB carrier for the channel I'm receiving. CHIRP handles the frequency split, but I can't specify the mode split. Any ideas? David / K7DB

2 1

Re: [chirp_users] Bf-888s
by Nate Alvin 24 Mar '17

24 Mar '17

2nd question. I originally got it working on my very old personal laptop running Vista. I was able to save a cloning image to do the rest of the work radios. Today i got it operational on my work laptop (Windows 7). I read a radio and went to save the image for future use. Nothing happened when i clicked save or save as. I went to close the program intending to restart chirp and it asked if i wanted to save i said yes and the dialog box closed and chirp remained open. I have looked through the settings, but i am sure i am missing something. Thanks for any help ! On Mar 22, 2017 2:56 PM, "Nate Alvin" <mypersonalspamfilternc(a)gmail.com> wrote: It worked. Thank you! On Mar 22, 2017 11:19 AM, "Nate Alvin" <mypersonalspamfilternc(a)gmail.com> wrote: > Thank you sir. I was doing some reading up on that and printed > instructions to do it later. Much appreciated ! > > On Mar 22, 2017 11:17, "Jim Unroe" <rock.unroe(a)gmail.com> wrote: > >> If you are using a programming cable with a Prolific chip with Windows, >> then the auto installed driver is incompatible. You must downgrade it to >> v3.2.0.0. There are instructions on miklor.com >> >> On Mar 22, 2017 9:20 AM, "Nate Alvin" <mypersonalspamfilternc(a)gmail.com> >> wrote: >> >>> I am very new to radios and programming. I am trying to program a >>> BF-888S for my business using your software. The radio was purchased a >>> week ago along with Baofeng cable. I get an error message of "radio >>> refused to enter programming mode". I have tried all the Baofeng models >>> listed with similiar results on 2 different laptops. Any help wouldbe >>> appreciated. Thanks >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Jim at rock.unroe(a)gmail.com >>> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >>> id.danplanet.com >>> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to N.C. at mypersonalspamfilternc(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> >

2 3

[chirp_users] New Daily Build
by Build System 24 Mar '17

24 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170324 A list of the changes included in this build (since the last daily) follows: Changes for Build #471 [Tom Hayward <tom(a)tomh.us>] [THD72] Fix buggy memory initialization. #1611 Allows channels added by Chirp to transmit.

1 0

[chirp_users] New user advice please
by Phil Cooper 23 Mar '17

23 Mar '17

Hi all, Last year, I purchased a Baofeng UV-5R Plus and a programming lead with the intention of setting up the radio with Chirp. A long story cut short - the lead was one that contained a "dodgy" Prolific IC, so I recently purchased a CP2102 module, and replaced the USB part of the lead. The drivers loaded correctly, and I have set the Com port. But, try as I might, all I get is "Radio failed to respond" from Chirp. My guess is that I am doing something wrong. So, what is the secret? Chirp help says to choose a quiet frequency, but makes no mention of whether the squelch should be open, fully closed, partly closed or what. Do you connect the radio to the lead, turn it on, and then click the OK button when prompted to do so? Or do you leave the radio off, and only turn it on when prompted? Also, I don't see the UV-5R Plus listed. I have tried using UV-5R as the model, and also tried using BF-F8HP, but I get the same result from both. So, what am I doing wrong? Best 73 Phil GU0SUP --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

7 13

[chirp_users] Ftdx5000
by John Wayman 23 Mar '17

23 Mar '17

Hello, I know it isn't on the list, but is it possible to program the FTdx5000 using chirp? I wondered whether the useless 60m channels applied could be re-programmed to be multi mode, and maybe even a few more channels could be programmed. Any ideas? Thanks John G4DRS

1 0

[chirp_users] programing baofeng 82c
by Joe Bryan 23 Mar '17

23 Mar '17

1. When programming simplex frequencies or 2 meter frequencies on chirp when you type in the frequencies and then go to the set-up pages, are you changing parameters for only the frequencies you typed in or are you overriding all previous set-ups?

2 1

Re: [chirp_users] New user advice please
by Simon Rodda 22 Mar '17

22 Mar '17

Hi Phil, Stick with it; chirp is really great once it's up and running. Now, you said that you reversed txd and rxd, then your pc powered off ?? That's unusual. You sure that's what you did? I've done some crazy stuff in my time, but never has a pc powered off if TX and RX were reversed. Cheers, Simon R, G4PEM On 22 Mar 2017 17:49, "pcooper(a)suremail.gg" <pcooper(a)suremail.gg> wrote: Hi Jim and the group, I already tried reversing the TXD and RXD lines in the PCB, but when I plugged the cable into the radio, the PC immediately switched off, which makes me think that was wrong! I have correctly chosen the right COM port (Com12 in my case), and I have almost completely removed the surrounding plastic from the radio end of the cable so that it is a better fit. I have also buzzed out each line from plug to PCB, and all is good there. I am happy with the soldering, as that is what I do for employment. When i changed to the CP2102 board, then connected it to my PC, Windows found the drivers automatically - although it wasn't quick - and a red LED is lit on the CP2102 PCB. However, when I open Chirp and try to download the radio, neither of the two led's associated with TXD and RXD lights up. Although this is a UV-5R Plus, do I still use the UV-5R option, or should I be using the BF-F8HP as the model? The Miklor site implies the latter, but reading the Chirp FAQ's implies that the UV-5R Plus is now grouped into the UV-5R models. Oh well, plan B it is then - get 3 wires and one each of 3.5mm and 2.5mm stereo jacks! 73 de Phil GU0SUP _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

1 0

[chirp_users] Bf-888s
by Nate Alvin 22 Mar '17

22 Mar '17

I am very new to radios and programming. I am trying to program a BF-888S for my business using your software. The radio was purchased a week ago along with Baofeng cable. I get an error message of "radio refused to enter programming mode". I have tried all the Baofeng models listed with similiar results on 2 different laptops. Any help wouldbe appreciated. Thanks

2 3

[chirp_users] Deleting Chirp completely
by Mike Kartchner 21 Mar '17

21 Mar '17

Can any one tell me how to delet chrip completly. So I can reinstall it All so It is not letting me save any thing when one I hit the save function

6 10

[chirp_users] New Daily Build
by Build System 21 Mar '17

21 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170321 A list of the changes included in this build (since the last daily) follows: Changes for Build #470 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-25X2] Add Support for new BTech Color Display Mobile Radios This patch modifies the btech.py driver to support additional mobile radios that have an OLED color display. Additional radio models supported: BTech UV-25X4 (quad band) BTech UV-25X2 (dual band) BTech UV-50X2 (dual band) New Model #4269

1 0

[chirp_users] CVS field content
by George S Leaf Sr 19 Mar '17

19 Mar '17

Kenwood TM-V71A(e) Read radio no issue. Export to csv no issue. Write csv back to Kenwood with Import no problem Notrepad edit of csv shows that there are several fileds with place holder data not showing in the on screen data entry display. Appear to be default tone values in not used for the current option as "tone" and such. Trying to understand the actual visible V71A fields vs the .csv content. It appears that CHIRP places these default values such as DCS tone 023 value in unused columns as place holder and that data is not displayed in the V71A programming display. Can someone explain the csv the behavior in inserting these placeholder values? Many Thanks george K8MYN (ex KM4PAA)

4 4

[chirp_users] Chirp 20170311 IC W32A Upload hangs @ 7
by bob 19 Mar '17

19 Mar '17

Hi All, I am attempting to program my IC W32A as follows 1. MacBookPro 2009 running ElCapitan 2. ‘REAL” Prolific USB Serial pigtail using RT DB9 version of cable for IC W32A 3. Radio Responds and Download Works well 0-99 channels. I only have one or two hand programmed 4. When I Upload it seems to be working okay until the count goes to 7. At that point The spinning ball of hang appears. I can Force quit Chirp but cannot run another attempt without rebooting OS X El Capitan. It is 100% reproducible and consistent in stopping at sequence 7 on the Icom Display. Ico Serial Number is 0505209. I read all posts and found a similar report about 3 years ago with no resolution. Any thoughts or advice. 73 Bob k7au Lacey, Wa

2 2

[chirp_users] Baofeng UV-5R
by Michael W Scheel 18 Mar '17

18 Mar '17

I have a problem programming my Baofeng UV-5R. I downloaded the file and then uploaded the code-plug with changes. Afterwards the radio doesn't have the offsets. I can just transmit simplex even though it was programed with an offset for a repeater. Am I missing something? Uploaded it twice now. -- ================================ Michael W Scheel Davenport Iowa, USA K0QCS ARRL - www.arrl.org Davenport (IA) ARC Quad-City Scale Modeler Society D.A.G.O.B.A.H. USMC Corporal 2531 1972-1976 ===============================

7 10

[chirp_users] Yaesu FT270R
by Eric Chopin 18 Mar '17

18 Mar '17

Hello Chirpers, I have just acquired a Yaesu FT-270R and would like to program it via CHIRP. I noticed that in the dropdown menu there is no FT-270, was wondering if anyone out there has any success maybe with another model in the CHIRP program. 73's Eric V7ECJ

2 1

[chirp_users] Baofeng UV-5RTP
by Tycen Stafford 16 Mar '17

16 Mar '17

I just got a pair of Baofeng UV-5RTP tri-power (8/4/1W) HT's. I see on CHIRP's wiki page <http://chirp.danplanet.com/projects/chirp/wiki/Home> and elsewhere to use BF-F8HP when trying to program from CHIRP. However, when I select that I get "An error has occurred: Incorrect 'Model' selected" and the radio reboots. If I select UV-5R as the model then CHIRP is able to download from the radio - but in CHIRP the only available power settings are HIGH and LOW. I tried uploading to one of the radios when selecting UV-5R and it seemed to work fine. On the radio I was still able to switch the transmit power between HIGH, MEDIUM and LOW - I'm just not able to set that in CHIRP. Should I just keep using the UV-5R selection or will that have unforeseen consequences (beyond having to manually set transmit power if I want medium). The firmware for both (holding down #3 while starting up) is listed as BFP3-23. I'm on macOS 10.12.3 and using CHIRP daily-20170311 (latest build as of this morning). Thanks for any info, Tycen K7TYC

4 5

[chirp_users] Github
by M Noivad 16 Mar '17

16 Mar '17

From: Tom Hayward <tom(a)tomh.us <mailto:tom@tomh.us>> > Chirp has an established system for source code management (or file > exchange, as you call it). It is called Mercurial, and for the > discussed use case it works identically to Git. I am aware & have use of Mercurial. But you misunderstand my suggestion for its use. I did not suggest GitHub be used for Chrip development, bug tracking, revision control, branching, merges, etc. I meant to use a section for github as a repository for user shared overlays. > Chirp has an established templating and overlay system for band plans. > This is nearly the same as what's being discussed, except it doesn't > have a "transmit allowed" flag. If one were going to add this feature, > that's where I would start. You do not understand the suggestion: what I am talking about is the next level above a template. It is one that is ADDITIVE otherwise known as an TEMPLATE/OVERLAY, that would: 1) allow users to share sets between groups and easily add them to their csvs 1b) allowing users to chose when setting conflict with globals or translate codes sent 1c)in turn it would take some pressure of the solo dev to update the app for new radios*. *It decouples the program from its variable configuration making updates faster & they could few pushed out via secure config update, etc. Thanks. M

1 0

Re: [chirp_users] Template & MediaWiki
by M Noivad 15 Mar '17

15 Mar '17

From: Drew Einhorn <drew.einhorn(a)gmail.com <mailto:drew.einhorn@gmail.com>> > The point is to make it easier for licensed folks to avoid mistakes that > violate the law, not to make it impossible for folks who intend to violate > the law. > > It's easy to accidentally press the TX button. I would prefer to easily > configure the radio to limit the damages. Duplex off is nice. But, I'd > prefer to set my country to US and license to Amateur Technician and > automatically have Duplex set correctly for all frequencies outside the > amateur bands. From: John Wilkerson <jl_wilkerson(a)att.net <mailto:jl_wilkerson@att.net>> > The suggestions should be posted at the Chirp website, if you'd ever > want them considered. If sounds like you’re requesting more of an additive template system with importable sets of preference templates based on license/region/organization that only overwrite specified fields, or open a new document with those fields set. This would allow you to save different presets in groups for different use cases/clients as well as combine sets (with the latest template added taking precedence). For instance that would allow a person to start with a “Technician,” “Extra,” template overlay a “CARLA region set” of channels, and then import their groups sets. Numerical collisions could either automatically add to the end or give the user a remap to # option per channel or per group. That system could be group sourced, and maintain the flexibility for an infinite number of use cases. From: David <weather(a)lightingunlimited.com <mailto:weather@lightingunlimited.com>> > What is MediaWiki? From: Drew Einhorn <drew.einhorn(a)gmail.com <mailto:drew.einhorn@gmail.com>> > MediaWiki is the very powerful wiki software that runs the Wikipedia and > many other well-known wikis. It is not the easiest to work with, but it can > do just about anything wiki related, and do it well. Casual users are > frequently overwhelmed by its complexity. So, it is often not the best > choice. I’ve been running a MediaWiki installation for over 10 years now. While MediaWiki is great for crowdsource, for file exchange, security & safety can be problematic. Instead I would probably crowdsource templates, suggested above, on github. For crowdsourced information, MediaWiki is great. Setup complexity is dependent on your server environment. For some it’s as simple as downloading a package and running the setup wizard, while for others it’s compiling from source, etc. If you need advice, I’d be happy to help. Thanks for Chirp. Mike KF6FGE

7 10

[chirp_users] tk860h, chirp
by bill lee 15 Mar '17

15 Mar '17

has anyone to use chirp on xp for a tk860h an make it work, i tried an wont work for programn, thanks bill, ka7nqg

5 8

Re: [chirp_users] Template & MediaWiki
by M Noivad 14 Mar '17

14 Mar '17

CARLA is a California Amateur Radio Linking Association. They have a series of 20-smthing linked repeaters throughout the SF Bay Area. If you transmit at a local frequency only the repeater you hit relays the message, if you use another frequency, it repeats your message throughout the CARLA relay system. Sorry, I should have specified this as an example of a set of different frequencies that would only be useful to Bay Area HAMs. Github itself is shared repository that is much more suited for file exchange. Github doesn’t have any templates, but it will host any type of file. So, if your app could import and export sets (not complete files that only work on 1 radio as now) as files in whatever internal format you wish, having sets available as a file others could download from Github would allow for add security. But this wouldn’t be all on you.* As far as github, it can be used to share applications, documentation, bugs, etc. Github is free to use for open exchange and there is a paid tier for pro use. (Free should work fine though) *Users could make a file of their channel sets & defaults ( I’m calling it a templates—though technically they’re more like an overlay since you can add them together ) and then post them to Github where other Hams can look at sets, such as the examples previously mentioned. As far as the “infinite number” of possible combinations, that meant the community could take some of the burden off you simple by making sets for groups or regions, etc. and share them. That way if someone wants a repeater channel set with a + or - offset, they can define that for the whole set & tweak individual exceptions. M

2 1

[chirp_users] Memory bank programming?
by John Beaston 11 Mar '17

11 Mar '17

I'd like to IMPORT memory bank programming from Excel but don't see a way of getting the correct Columns or Sheet to start. I've tried doing a download from the radio (FT-7900 and FT-60) and then doing an EXPORT. I don't see the memory banks in the exported .csv file. Is memory bank programming something CHIRP supports? Thanks -John K7TY

3 7

[chirp_users] Duplex "off" option
by Richard B. Booth 11 Mar '17

11 Mar '17

For the Baofeng UV-5R and variants....when programming a simplex frequency channel.. will setting the Duplex option in CHIRP to "Off" result in suppressing the TX in simplex operations? The reason for asking is as follows: I have several police and fire freqs programmed into my radios, i.e., simplex. I want to make sure that even if I make a mistake and hit the TX key, I will not TX on these freqs. I have in the past programmed these memory channels using split mode and setting the TX on a dummy freq well away from the agency RX/TX freq. Thanks for any help !! Notice: This message content and attachments are intended for the sole use of the intended recipient(s). Any use by unauthorized persons is prohibited and may be unlawful. Forwarding of this email without the permission of the sender, original sender, or author is not authorized. Forwarding without permission negates all liability, stated or implied, as applicable to the sender, original sender, or author.

13 24

[chirp_users] New Daily Build
by Build System 11 Mar '17

11 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170311 A list of the changes included in this build (since the last daily) follows: Changes for Build #469 [Dan Smith <dsmith(a)danplanet.com>] Add some stuff to .hgignore for build system storage #0 [Jim Unroe <rock.unroe(a)gmail.com>] [TH-UV3R] DTCS Bug in TYT TH-UV3R Driver The typos in this driver were discovered when researching DTCS code being addressed in the Retevis RT22 and other radio models. Related to #4585 [Dan Smith <dsmith(a)danplanet.com>] Add test image for #4585 [Jim Unroe <rock.unroe(a)gmail.com>] [NC-630A] DTCS Bug in KYD NC-630A Driver This patch addresses the bug where the DTCS Tone value can't but updated when Tone Mode is set to DTCS. Related to #4585 [Dan Smith <dsmith(a)danplanet.com>] Fix unregistered TID TD-M8 model #4597

1 0

[chirp_users] memories copy paste error - tx power changes
by Neil B 10 Mar '17

10 Mar '17

Hi, when i select all lines and copy to clipboard, move to another tab(Leixen_VV-898S tester) , all the power levels have changed for the set of high, to low.

1 0

[chirp_users] OBLTR-8R
by Brian Harmon 10 Mar '17

10 Mar '17

First time on this site, trying to learn how to program the above listed radio using CHIRP. Thanks, Brian

2 2

[chirp_users] Yeasu Ft-60 download error
by Greg Gauthier 09 Mar '17

09 Mar '17

I’m trying to download from a new Yeasu FT-60R. It has two frequencies saved in memory. When the download (Tx) begins I receive the error message: Failed to communicate with radio: Reading block 0 was short (0). I’ve repeated the procedure several times. Each time I receive the same message but the block number and short number change. Is there a fix for this error? Greg

2 2

[chirp_users] No Support of Wouxon KG699E?
by Pat Anderson 09 Mar '17

09 Mar '17

I have mostly been using my Baofeng UV-5R with CHIRP, all good (actually great, running CHIRP under Ubuntu on a $160 Chromebook!). I just got my old Wouxon KG-699E out and tried it with CHIRP, no joy. The KG-699E is not listed among the supported Wouxon radios. I tried each of the supported radios, all resulted in an error message. I don't remember if I ever programmed this radio with CHIRP, but I have to think that I did because manual programming is such a B*TCH, although I might have used Wouxon's dedicated software on some long-gone computer. So, can I use CHIRP with this radio, and if so, how? Pat Anderson KD7OAC

2 1

[chirp_users] New Daily Build
by Build System 09 Mar '17

09 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170309 A list of the changes included in this build (since the last daily) follows: Changes for Build #468 [Jim Unroe <rock.unroe(a)gmail.com>] [IP-620] DTCS Bug in KYD IP-620 Driver This patch addresses the bug where the DTCS Tone value can't but updated when Tone Mode is set to DTCS. Related to #4585 [Jim Unroe <rock.unroe(a)gmail.com>] [KG-UV8D] DTCS Bug in Wouxun KG-UV8D Driver This patch addresses the bug where the DTCS Tone value can't but updated when Tone Mode is set to DTCS. Related to #4585 [Jim Unroe <rock.unroe(a)gmail.com>] [KG-UV6D] DTCS Bug in Wouxun Driver This patch addresses the bug where the DTCS Tone value can't but updated when Tone Mode is set to DTCS. Related to #4585 [Jim Unroe <rock.unroe(a)gmail.com>] [RT-21] DTCS Bug in Retevis RT-21 Driver This patch addresses the bug where the DTCS Tone value can't but updated when Tone Mode is set to DTCS. Related to #4585 [Dan Smith <dsmith(a)danplanet.com>] Fix RH5X alias The F8HP has an A58 ident string, but the actual radio that the RH5X is an alias of, is the BF-A58. #4597 [Jim Unroe <rock.unroe(a)gmail.com>] [KT7900D/KT8900D] Correct Typo This patch corrects a typo that incorrectly references the KT8900D model when it should be the KT7900D model. related to #4269

1 0

[chirp_users] RCA BR250
by Dan Grant 08 Mar '17

08 Mar '17

I have a couple of RCA BR250 and they are good little radios but there is a marked lack of ‘3rd party’ info on them. It seems that they may actually be rebranded from another manufacturer, possibly HYT. Can these radios be programmed by CHIRP (assuming I choose a different setting as RCA BR250 isn’t available)? Is there a cable available or do I make my own? The pin spacing is smaller than the cable for my Baofeng UV-5R. Thanks in advance! Dan

2 2

[chirp_users] Baofeng UV-5R
by Dan Grant 08 Mar '17

08 Mar '17

I'm VERY new at this so hope this question isn't off base! I have a new Baofeng UV-5R and have made my own cable to connect to it. The cable I've made is a DB9F to 3.5mm and 2.5mm plugs. The USB to serial adapter that I connect to is one that I've used with other things and works fine. With the connectors in the radio the display comes up with a solid black dot matrix in the top frequency display and most of the info icons across the top. When I try to read the radio with CHIRP, I can see some data communication on the lights of the USB/Serial interface and the radio display changes to almost normal but then goes in to transmit mode and everything stops. I get an error indicating that "An error has occurred - Radio did not respond". I'm hoping someone can suggest some things to look at to further troubleshoot this! Thanks Dan Grant

9 10

[chirp_users] Uniden SMU250 KTS
by Patrick Brown 08 Mar '17

08 Mar '17

I have 3 Uniden SMU250KTS UHF radios I am trying to find software for also if anyone would send it to me. I am sure Chirp will not do it . -- Patrick Brown YCSRT 3213 N7FHB Wilhoit 145.350 Wildflower SYCSRT TEAM Manager http://ycsrt.org T.E.A.M = Together Everyone Accomplishes More

1 0

[chirp_users] New Daily Build
by Build System 08 Mar '17

08 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170308 A list of the changes included in this build (since the last daily) follows: Changes for Build #467 [Dan Smith <dsmith(a)danplanet.com>] Add Rugged RH5R and RH5X aliases #4597 [Dan Smith <dsmith(a)danplanet.com>] Revert recent patch to alias-ify RT22 variants Aso make the new driver a proper subclass like the rest. Jim explained that the RT22 driver behaves differently from most, in that it appends the model used to download to the end of the image for detection reasons, and this broke that. related to bug #4551

1 0

[chirp_users] New Daily Build
by Build System 07 Mar '17

07 Mar '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170307 A list of the changes included in this build (since the last daily) follows: Changes for Build #466 [Jim Unroe <rock.unroe(a)gmail.com>] [RT-22] DTCS Bug in Retevis RT-22 Driver This patch addresses the bug where the DTCS Tone value can't but updated when Tone Mode is set to DTCS. Related to #4585 [Mathias Weyland <lt-betrieb(a)hb9uf.ch>] Alinco DJ-G7: Try slower baud rate if default rate fails (#4355) Alinco support is suggesting to use lower baud rates if the programming software fails to communicate with the radio reliably. This patch alters the code for the Alinco DJ-G7 radio such that if falls back to 19200 baud if the default of 57600 baud does not work. The user must set his radio to 19200 baud for this mechanism to kick in. Dialog boxes were added accordingly using the chirp_common.RadioPrompts() feature. [Dan Smith <dsmith(a)danplanet.com>] Images for #2107 [Jim Unroe <rock.unroe(a)gmail.com>] [New Model] TDXone TD-Q8A This patch adds support for the TDXone TD-Q8A radio. #2107 [Dan Smith <dsmith(a)danplanet.com>] Images for #4269 [Jim Unroe <rock.unroe(a)gmail.com>] [KT7900D] Add Support for QYT KT7900D and KT8900D Mobile Radios This patch modifies the btech.py driver to prepare it to support a new series of mobile radios that have an OLED color display. Radio models initially supported: QYT KT7900D (quad band) QYT KT8900D (dual band) New Model #4269

1 0

Re: [chirp_users] chirp_users Digest, Vol 99, Issue 1
by Bill, K5LK 04 Mar '17

04 Mar '17

help On Wed, Mar 1, 2017 at 2:00 PM, <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. FT 2900 Modded (Tom Barton) > 2. Re: FT 2900 Modded (Baji Panchumarti) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 28 Feb 2017 20:36:55 -0500 > From: Tom Barton <tbarton(a)hvc.rr.com> > Subject: [chirp_users] FT 2900 Modded > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: <f2ef20c6-f354-15c0-a1d0-4e5bd3848e81(a)hvc.rr.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > Asking again - does anyone know how to patch Chirp to recognize a TX > Modded FT 2900? There has got to be somewhere to edit in the response > header. > > Thanks, > > Tom B. > > > > ------------------------------ > > Message: 2 > Date: Wed, 1 Mar 2017 11:52:19 -0500 > From: Baji Panchumarti <ohiobaji(a)gmail.com> > Subject: Re: [chirp_users] FT 2900 Modded > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAM=xYAfM5T6HDq2dW0UTR-c5tMJT_4qQ45JVv4HGJ3U8X5UFQg@ > mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > http://chirp.danplanet.com/issues/925 > > > FT 2900 discussion in Yaesu group on yahoo: > > > http://groups.yahoo.com/neo/groups/yaesu-radios/ > conversations/messages/2826 > > > I don't know if either link above will address your modded radio question, > but you may be able to get a hand from other FT 2900 enthusiasts on those > posts. > > > -baji. > > ~~ > > ? ? > On Tue, Feb 28, 2017 at 8:36 PM, Tom Barton <tbarton(a)hvc.rr.com> wrote: > > Asking again - does anyone know how to patch Chirp to recognize a TX > > Modded FT 2900? There has got to be somewhere to edit in the response > > header. > > > > Thanks, > > > > Tom B. > > > > __ >

2 1

Re: [chirp_users] FT 2900 Modded
by Baji Panchumarti 01 Mar '17

01 Mar '17

http://chirp.danplanet.com/issues/925 FT 2900 discussion in Yaesu group on yahoo: http://groups.yahoo.com/neo/groups/yaesu-radios/conversations/messages/2826 I don't know if either link above will address your modded radio question, but you may be able to get a hand from other FT 2900 enthusiasts on those posts. -baji. ~~ On Tue, Feb 28, 2017 at 8:36 PM, Tom Barton <tbarton(a)hvc.rr.com> wrote: Asking again - does anyone know how to patch Chirp to recognize a TX > Modded FT 2900? There has got to be somewhere to edit in the response > header. > > Thanks, > > Tom B. > > __

1 0

[chirp_users] FT 2900 Modded
by Tom Barton 28 Feb '17

28 Feb '17

Asking again - does anyone know how to patch Chirp to recognize a TX Modded FT 2900? There has got to be somewhere to edit in the response header. Thanks, Tom B.

1 0

[chirp_users] WLN radios
by Patrick Brown 27 Feb '17

27 Feb '17

I have been trying to program 2 WLN radios supported by chirp and it don't seem to up load DCS tones and when saving the file it does not save the DCS tones ? This is one of those radios where a print out would help as it does not have a screen. -- Patrick Brown YCSRT 3213 N7FHB Wilhoit 145.350 Wildflower SYCSRT TEAM Manager http://ycsrt.org T.E.A.M = Together Everyone Accomplishes More

2 4

Re: [chirp_users] using two different radios together
by Baji Panchumarti 27 Feb '17

27 Feb '17

Max, Since you said that you are very new to programming radios, I would use a transitive method <https://en.wikipedia.org/wiki/Transitive_relation> of troubleshooting the issue you are having. I would get the frequency-tone-offset info on a local repeater that is open to the public, and program one of the two radios to tune into that repeater. Once I'm able to hear the repeater on the radio, I would see if I can key-up from the same radio and raise the repeater. Next I would do the same from the second radio. When radio-1 is able to send and receive from the repeater & radio-2 is also able to send & receive from the same repeater, then radio-1 & radio-2 will be able to talk to each other directly if you swap the send & receive frequencies on one of the radios, while making sure that you are using the same DCS <https://en.wikipedia.org/wiki/Squelch#DCS> or CTCSS <https://en.wikipedia.org/wiki/Continuous_Tone-Coded_Squelch_System> settings on both. Based on my limited experience, currently, when you transmit from the ATR-22 & the EVX-531's receive lights up, the receiver is expecting a specific DCS <https://en.wikipedia.org/wiki/Squelch#DCS> or CTCSS <https://en.wikipedia.org/wiki/Continuous_Tone-Coded_Squelch_System> tone that it is not seeing. The ATR-22 is either not transmitting any tone or not the one that the EVX is expecting. It will be interesting to hear what you find. ~~ Baji Panchumarti - OhioBaji(a)gmail.com K 8 I I T _ On Mon, Feb 27, 2017 at 11:01 AM, Max Hames <mfhames(a)gmail.com> wrote: Hello, > > I'm trying to get two different radios to talk to one another and I'm > running into an issue that I think is due to me never having programmed a > radio before! Specifically I'm trying to integrate an Amcrest ATR-22 radio > with a Vertex Standard EVX-531. I'm using the CE142 software for > programming the 531s and CHIRP for the ATR-22. When I transmit from the > ATR-22 the green receiving light comes on the EVX-531 but there's no > audio. When I transmit from the 531s there's no receiving light on the ATR. > > Does anyone have any idea what I'm missing here? I'd really appreciate the > help. > > Thank you! > > MFH > > > -- > MFH > > ___

1 0

[chirp_users] using two different radios together
by Max Hames 27 Feb '17

27 Feb '17

Hello, I'm trying to get two different radios to talk to one another and I'm running into an issue that I think is due to me never having programmed a radio before! Specifically I'm trying to integrate an Amcrest ATR-22 radio with a Vertex Standard EVX-531. I'm using the CE142 software for programming the 531s and CHIRP for the ATR-22. When I transmit from the ATR-22 the green receiving light comes on the EVX-531 but there's no audio. When I transmit from the 531s there's no receiving light on the ATR. Does anyone have any idea what I'm missing here? I'd really appreciate the help. Thank you! MFH -- MFH

1 0

Re: [chirp_users] Baofeng UV-5RM HP
by Baji Panchumarti 27 Feb '17

27 Feb '17

Per Jim's (KC9HI) suggestion, I would try BF-F8HP first; then I would all supported 3 power level model Baofengs. http://chirp.danplanet.com/projects/chirp/wiki/Home [image: Inline image 1] It also seems that only 2 power level variants of UV-5R are listed. http://chirp.danplanet.com/projects/chirp/wiki/Baofeng_UV5R_Variants ~~ Baji Panchumarti K 8 I I T _ On Sun, Feb 26, 2017 at 9:25 PM, L B <mech5(a)gt.rr.com> wrote: > Have tried UV-5R several times. Is theBF-F8HP the same? Have not found any > documentation to support that. > > On 2/26/2017 5:58 PM, Jim Unroe wrote: > > On Sun, Feb 26, 2017 at 6:50 PM, L B <mech5(a)gt.rr.com> <mech5(a)gt.rr.com> wrote: > > Have a new Baofeng UV-5RM HP. Cannot find support for this unit to program. > Any news on when CHirp will support this one? > -- > > > > L.B. Little > WB5YDA > > > It probably already does. Have you tried BF-F8HP or UV-5R? > > Jim KC9HI > ___________ > >

2 1

[chirp_users] Chrip
by Jeffery Burkhart 27 Feb '17

27 Feb '17

I want to unsubscribe.

4 3

[chirp_users] Baofeng UV-5RM HP
by L B 27 Feb '17

27 Feb '17

Have a new Baofeng UV-5RM HP. Cannot find support for this unit to program. Any news on when CHirp will support this one? -- Image result for WHere to get ARRL logo L.B. Little *WB5YDA *President *Beaumont Amateur Radio Club - W5RIN* Ph: 409-782-3115 Email:mech5@gt.rr.com http://www.qsl.net/w5rin/ <http://www.qsl.net/W5RIN>

2 4

[chirp_users] baofeng gt-3tp mk3
by Neil B 26 Feb '17

26 Feb '17

chirp_users(a)intrepid.danplanet.com HI i have a new gt-3tp (in addtion to my uv-r5) i tried using the bf-f8hp as used by others on this radio. but on download it errors with incorrect model selected. i tried reading all in the bf drop down menu and the venerable uv-5r mode was used to be able to read and suprisingly write back to the gt3tp. just lacking the medium power options and possibly more..... it seems to work with the memorys using 5r upload but would be better with the correct means of up/downlodaing. many thanks to you and chirp [😊] [2017-02-13 16:38:24,197] chirp.logger - DEBUG: CHIRP daily-20170212 on WinVista/7 (Python 2.7.10) [2017-02-13 16:38:24,267] chirp.directory - INFO: Registered Alinco_DR03T = DR03Radio [2017-02-13 16:38:24,267] chirp.directory - INFO: Registered Alinco_DR06T = DR06Radio [2017-02-13 16:38:24,267] chirp.directory - INFO: Registered Alinco_DR135T = DR135Radio [2017-02-13 16:38:24,267] chirp.directory - INFO: Registered Alinco_DR235T = DR235Radio [2017-02-13 16:38:24,267] chirp.directory - INFO: Registered Alinco_DR435T = DR435Radio [2017-02-13 16:38:24,267] chirp.directory - INFO: Registered Alinco_DJ596 = DJ596Radio [2017-02-13 16:38:24,267] chirp.directory - INFO: Registered Jetstream_JT220M = JT220MRadio [2017-02-13 16:38:24,269] chirp.directory - INFO: Registered Alinco_DJ175 = DJ175Radio [2017-02-13 16:38:24,269] chirp.directory - INFO: Registered Alinco_DJ-G7EG = AlincoDJG7EG [2017-02-13 16:38:24,269] chirp.directory - INFO: Registered AnyTone_5888UV = AnyTone5888UVRadio [2017-02-13 16:38:24,269] chirp.directory - INFO: Registered Intek_HR-2040 = IntekHR2040Radio [2017-02-13 16:38:24,269] chirp.directory - INFO: Registered Polmar_DB-50M = PolmarDB50MRadio [2017-02-13 16:38:24,269] chirp.directory - INFO: Registered Powerwerx_DB-750X = PowerwerxDB750XRadio [2017-02-13 16:38:24,270] chirp.directory - INFO: Registered AnyTone_TERMN-8R = AnyToneTERMN8RRadio [2017-02-13 16:38:24,270] chirp.directory - INFO: Registered AnyTone_OBLTR-8R = AnyToneOBLTR8RRadio [2017-02-13 16:38:24,273] chirp.directory - INFO: Registered Baofeng_UV-3R = UV3RRadio [2017-02-13 16:38:24,273] chirp.directory - INFO: Registered Baofeng_BF-A58 = BFA58 [2017-02-13 16:38:24,273] chirp.directory - INFO: Registered Baofeng_UV-82WP = UV82WP [2017-02-13 16:38:24,273] chirp.directory - INFO: Registered Baofeng_GT-3WP = GT3WP [2017-02-13 16:38:24,273] chirp.directory - INFO: Registered Retevis_RT6 = RT6 [2017-02-13 16:38:24,275] chirp.directory - INFO: Registered Baojie_BJ-9900 = BJ9900Radio [2017-02-13 16:38:24,276] chirp.directory - INFO: Registered Baofeng_UV-5R = BaofengUV5RGeneric [2017-02-13 16:38:24,276] chirp.directory - INFO: Registered Baofeng_F-11 = BaofengF11Radio [2017-02-13 16:38:24,276] chirp.directory - INFO: Registered Baofeng_UV-82 = BaofengUV82Radio [2017-02-13 16:38:24,276] chirp.directory - INFO: Registered Baofeng_UV-6 = BaofengUV6Radio [2017-02-13 16:38:24,276] chirp.directory - INFO: Registered Intek_KT-980HP = IntekKT980Radio [2017-02-13 16:38:24,276] chirp.directory - INFO: Registered Baofeng_BF-F8HP = BaofengBFF8HPRadio [2017-02-13 16:38:24,278] chirp.directory - INFO: Registered Baofeng_UV-82HP = BaofengUV82HPRadio [2017-02-13 16:38:24,278] chirp.directory - INFO: Registered Baojie_BJ-UV55 = BaojieBJUV55Radio [2017-02-13 16:38:24,279] chirp.directory - INFO: Registered BTECH_UV-2501 = UV2501 [2017-02-13 16:38:24,279] chirp.directory - INFO: Registered BTECH_UV-2501+220 = UV2501_220 [2017-02-13 16:38:24,279] chirp.directory - INFO: Registered BTECH_UV-5001 = UV5001 [2017-02-13 16:38:24,279] chirp.directory - INFO: Registered WACCOM_MINI-8900 = MINI8900 [2017-02-13 16:38:24,279] chirp.directory - INFO: Registered QYT_KT-UV980 = KTUV980 [2017-02-13 16:38:24,279] chirp.directory - INFO: Registered QYT_KT8900 = KT9800 [2017-02-13 16:38:24,279] chirp.directory - INFO: Registered QYT_KT8900R = KT9800R [2017-02-13 16:38:24,279] chirp.directory - INFO: Registered LUITON_LT-588UV = LT588UV [2017-02-13 16:38:24,280] chirp.directory - INFO: Registered Feidaxin_FD-268A = FD268ARadio [2017-02-13 16:38:24,280] chirp.directory - INFO: Registered Feidaxin_FD-268B = FD268BRadio [2017-02-13 16:38:24,280] chirp.directory - INFO: Registered Feidaxin_FD-288A = FD288ARadio [2017-02-13 16:38:24,282] chirp.directory - INFO: Registered Feidaxin_FD-288B = FD288BRadio [2017-02-13 16:38:24,282] chirp.directory - INFO: Registered Feidaxin_FD-150A = FD150ARadio [2017-02-13 16:38:24,282] chirp.directory - INFO: Registered Feidaxin_FD-160A = FD160ARadio [2017-02-13 16:38:24,282] chirp.directory - INFO: Registered Feidaxin_FD-450A = FD450ARadio [2017-02-13 16:38:24,282] chirp.directory - INFO: Registered Feidaxin_FD-460A = FD460ARadio [2017-02-13 16:38:24,282] chirp.directory - INFO: Registered Feidaxin_FD-460UH = FD460UHRadio [2017-02-13 16:38:24,282] chirp.directory - INFO: Registered Yaesu_FT-1802M = FT1802Radio [2017-02-13 16:38:24,285] chirp.directory - INFO: Registered Yaesu_FT-1D_R = FT1Radio [2017-02-13 16:38:24,285] chirp.directory - INFO: Registered Yaesu_FT-2800M = FT2800Radio [2017-02-13 16:38:24,286] chirp.directory - INFO: Registered Yaesu_FT-2900R_1900R = FT2900Radio [2017-02-13 16:38:24,286] chirp.directory - INFO: Registered Yaesu_FT-50 = FT50Radio [2017-02-13 16:38:24,288] chirp.directory - INFO: Registered Yaesu_FT-60 = FT60Radio [2017-02-13 16:38:24,289] chirp.directory - INFO: Registered Yaesu_FT-7800_7900 = FT7800Radio [2017-02-13 16:38:24,289] chirp.directory - INFO: Registered Yaesu_FT-8800 = FT8800Radio [2017-02-13 16:38:24,289] chirp.directory - INFO: Registered Yaesu_FT-8900 = FT8900Radio [2017-02-13 16:38:24,289] chirp.directory - INFO: Registered Yaesu_FT-8100 = FT8100Radio [2017-02-13 16:38:24,290] chirp.directory - INFO: Registered Yaesu_FT-817 = FT817Radio [2017-02-13 16:38:24,290] chirp.directory - INFO: Registered Yaesu_FT-817ND = FT817NDRadio [2017-02-13 16:38:24,290] chirp.directory - INFO: Registered Yaesu_FT-817ND_US = FT817NDUSRadio [2017-02-13 16:38:24,292] chirp.directory - INFO: Registered Yaesu_FT-857_897 = FT857Radio [2017-02-13 16:38:24,292] chirp.directory - INFO: Registered Yaesu_FT-857_897_US = FT857USRadio [2017-02-13 16:38:24,292] chirp.directory - INFO: Registered Yaesu_FT-90 = FT90Radio [2017-02-13 16:38:24,292] chirp.directory - INFO: Registered Yaesu_FTM-350 = FTM350Radio [2017-02-13 16:38:24,295] chirp.directory - INFO: Registered Generic_CSV = CSVRadio [2017-02-13 16:38:24,295] chirp.directory - INFO: Registered Commander_KG-UV = CommanderCSVRadio [2017-02-13 16:38:24,295] chirp.directory - INFO: Registered RT_Systems_CSV = RTCSVRadio [2017-02-13 16:38:24,295] chirp.directory - INFO: Registered ARRL_Travel_Plus = TpeRadio [2017-02-13 16:38:24,305] chirp.directory - INFO: Registered Generic_XML = XMLRadio [2017-02-13 16:38:24,305] chirp.directory - INFO: Registered BTECH_GMRS-V1 = GMRSV1 [2017-02-13 16:38:24,312] chirp.directory - INFO: Registered Baofeng_BF-888 = H777Radio [2017-02-13 16:38:24,312] chirp.directory - INFO: Registered HobbyPCB_RS-UV3 = HobbyPCBRSUV3Radio [2017-02-13 16:38:24,313] chirp.directory - INFO: Registered Icom_IC-208H = IC208Radio [2017-02-13 16:38:24,313] chirp.directory - INFO: Registered Icom_IC-2100H = IC2100Radio [2017-02-13 16:38:24,313] chirp.directory - INFO: Registered Icom_IC-2200H = IC2200Radio [2017-02-13 16:38:24,315] chirp.directory - INFO: Registered Icom_IC-2720H = IC2720Radio [2017-02-13 16:38:24,315] chirp.directory - INFO: Registered Icom_IC-2820H = IC2820Radio [2017-02-13 16:38:24,316] chirp.directory - INFO: Registered Icom_IC-91_92AD = IC9xRadio [2017-02-13 16:38:24,318] chirp.directory - INFO: Registered Icom_7200 = Icom7200Radio [2017-02-13 16:38:24,318] chirp.directory - INFO: Registered Icom_IC-7000 = Icom7000Radio [2017-02-13 16:38:24,318] chirp.directory - INFO: Registered Icom_IC-7100 = Icom7100Radio [2017-02-13 16:38:24,318] chirp.directory - INFO: Registered Icom_746 = Icom746Radio [2017-02-13 16:38:24,319] chirp.directory - INFO: Registered Icom_IC-Q7A = ICQ7Radio [2017-02-13 16:38:24,319] chirp.directory - INFO: Registered Icom_IC-T70 = ICT70Radio [2017-02-13 16:38:24,319] chirp.directory - INFO: Registered Icom_IC-T7H = ICT7HRadio [2017-02-13 16:38:24,319] chirp.directory - INFO: Registered Icom_IC-T8A = ICT8ARadio [2017-02-13 16:38:24,319] chirp.directory - INFO: Registered Icom_IC-W32A = ICW32ARadio [2017-02-13 16:38:24,321] chirp.directory - INFO: Registered Icom_IC-W32E = ICW32ERadio [2017-02-13 16:38:24,322] chirp.directory - INFO: Registered Icom_IC-V82_U82 = ICx8xRadio [2017-02-13 16:38:24,322] chirp.directory - INFO: Registered Icom_ID-31A = ID31Radio [2017-02-13 16:38:24,322] chirp.directory - INFO: Registered Icom_ID-51 = ID51Radio [2017-02-13 16:38:24,322] chirp.directory - INFO: Registered Icom_ID-51_Plus = ID51PLUSRadio [2017-02-13 16:38:24,322] chirp.directory - INFO: Registered Icom_ID-800H_v2 = ID800v2Radio [2017-02-13 16:38:24,323] chirp.directory - INFO: Registered Icom_ID-880H = ID880Radio [2017-02-13 16:38:24,323] chirp.directory - INFO: Registered Icom_ID-80H = ID80Radio [2017-02-13 16:38:24,323] chirp.directory - INFO: Registered Kenwood_HMK = HMKRadio [2017-02-13 16:38:24,325] chirp.directory - INFO: Registered Kenwood_ITM = ITMRadio [2017-02-13 16:38:24,325] chirp.directory - INFO: Registered Kenwood_TH-D7 = THD7Radio [2017-02-13 16:38:24,325] chirp.directory - INFO: Registered Kenwood_TH-D7G = THD7GRadio [2017-02-13 16:38:24,325] chirp.directory - INFO: Registered Kenwood_TM-D700 = TMD700Radio [2017-02-13 16:38:24,326] chirp.directory - INFO: Registered Kenwood_TM-V7 = TMV7Radio [2017-02-13 16:38:24,326] chirp.directory - INFO: Registered Kenwood_TM-G707 = TMG707Radio [2017-02-13 16:38:24,326] chirp.directory - INFO: Registered Kenwood_TH-G71 = THG71Radio [2017-02-13 16:38:24,326] chirp.directory - INFO: Registered Kenwood_TH-F6 = THF6ARadio [2017-02-13 16:38:24,326] chirp.directory - INFO: Registered Kenwood_TH-F7 = THF7ERadio [2017-02-13 16:38:24,326] chirp.directory - INFO: Registered Kenwood_TM-D710 = TMD710Radio [2017-02-13 16:38:24,328] chirp.directory - INFO: Registered Kenwood_TH-D72_live_mode = THD72Radio [2017-02-13 16:38:24,328] chirp.directory - INFO: Registered Kenwood_TM-V71 = TMV71Radio [2017-02-13 16:38:24,328] chirp.directory - INFO: Registered Kenwood_TM-D710G = TMD710GRadio [2017-02-13 16:38:24,328] chirp.directory - INFO: Registered Kenwood_TH-K2 = THK2Radio [2017-02-13 16:38:24,328] chirp.directory - INFO: Registered Kenwood_TM-271 = TM271Radio [2017-02-13 16:38:24,328] chirp.directory - INFO: Registered Kenwood_TM-281 = TM281Radio [2017-02-13 16:38:24,328] chirp.directory - INFO: Registered Kenwood_TM-471 = TM471Radio [2017-02-13 16:38:24,328] chirp.directory - INFO: Registered Wouxun_KG-UV8D = KGUV8DRadio [2017-02-13 16:38:24,329] chirp.directory - INFO: Registered KYD_NC-630A = NC630aRadio [2017-02-13 16:38:24,331] chirp.directory - INFO: Registered KYD_IP-620 = IP620Radio [2017-02-13 16:38:24,332] chirp.directory - INFO: Registered Leixen_VV-898 = LeixenVV898Radio [2017-02-13 16:38:24,332] chirp.directory - INFO: Registered Jetstream_JT270M = JetstreamJT270MRadio [2017-02-13 16:38:24,332] chirp.directory - INFO: Registered Jetstream_JT270MH = JetstreamJT270MHRadio [2017-02-13 16:38:24,332] chirp.directory - INFO: Registered Leixen_VV-898S = LeixenVV898SRadio [2017-02-13 16:38:24,332] chirp.directory - INFO: Registered LUITON_LT-725UV = LT725UV [2017-02-13 16:38:24,334] chirp.directory - INFO: Registered Wouxun_KG-UVD1P = KGUVD1PRadio [2017-02-13 16:38:24,334] chirp.directory - INFO: Registered Wouxun_KG-UV6 = KGUV6DRadio [2017-02-13 16:38:24,334] chirp.directory - INFO: Registered Wouxun_KG-816 = KG816Radio [2017-02-13 16:38:24,335] chirp.directory - INFO: Registered Wouxun_KG-818 = KG818Radio [2017-02-13 16:38:24,335] chirp.directory - INFO: Registered Puxing_PX-777 = Puxing777Radio [2017-02-13 16:38:24,335] chirp.directory - INFO: Registered Puxing_PX-2R = Puxing2RRadio [2017-02-13 16:38:24,335] chirp.directory - INFO: Registered Puxing_PX-888K = Puxing_PX888K_Radio [2017-02-13 16:38:24,336] chirp.directory - INFO: Registered Retevis_RT1 = RT1Radio [2017-02-13 16:38:24,338] chirp.directory - INFO: Registered Retevis_RT21 = RT21Radio [2017-02-13 16:38:24,338] chirp.directory - INFO: Registered Retevis_RT22 = RT22Radio [2017-02-13 16:38:24,338] chirp.directory - INFO: Registered WLN_KD-C1 = KDC1 [2017-02-13 16:38:24,338] chirp.directory - INFO: Registered Zastone_ZT-X6 = ZTX6 [2017-02-13 16:38:24,338] chirp.directory - INFO: Registered LUITON_LT-316 = LT316 [2017-02-13 16:38:24,339] chirp.directory - INFO: Registered TYT_TH-7800_File = TYTTH7800File [2017-02-13 16:38:24,339] chirp.directory - INFO: Registered TYT_TH-7800 = TYTTH7800Radio [2017-02-13 16:38:24,341] chirp.directory - INFO: Registered TYT_TH9000_220 = Th9000220Radio [2017-02-13 16:38:24,341] chirp.directory - INFO: Registered TYT_TH9000_144 = Th9000144Radio [2017-02-13 16:38:24,341] chirp.directory - INFO: Registered TYT_TH9000_440 = Th9000440Radio [2017-02-13 16:38:24,342] chirp.directory - INFO: Registered TYT_TH-9800_File = TYTTH9800File [2017-02-13 16:38:24,342] chirp.directory - INFO: Registered TYT_TH-9800 = TYTTH9800Radio [2017-02-13 16:38:24,344] chirp.directory - INFO: Registered TYT_TH-UV3R = TYTUV3RRadio [2017-02-13 16:38:24,344] chirp.directory - INFO: Registered TYT_TH-UV3R-25 = TYTUV3R25Radio [2017-02-13 16:38:24,345] chirp.directory - INFO: Registered TYT_TH-UVF8D = TYTUVF8DRadio [2017-02-13 16:38:24,345] chirp.directory - INFO: Registered Kenwood_TH-D72_clone_mode = THD72Radio [2017-02-13 16:38:24,345] chirp.directory - INFO: Registered TYT_TH-UVF1 = TYTTHUVF1Radio [2017-02-13 16:38:24,346] chirp.directory - INFO: Registered Kenwood_TK-260 = TK260_Radio [2017-02-13 16:38:24,346] chirp.directory - INFO: Registered Kenwood_TK-270 = TK270_Radio [2017-02-13 16:38:24,346] chirp.directory - INFO: Registered Kenwood_TK-272 = TK272_Radio [2017-02-13 16:38:24,346] chirp.directory - INFO: Registered Kenwood_TK-278 = TK278_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-360 = TK360_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-370 = TK370_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-372 = TK372_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-378 = TK378_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-760 = TK760_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-762 = TK762_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-768 = TK768_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-860 = TK860_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-862 = TK862_Radio [2017-02-13 16:38:24,348] chirp.directory - INFO: Registered Kenwood_TK-868 = TK868_Radio [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-868G = TK868G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-862G = TK862G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-860G = TK860G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-768G = TK768G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-762G = TK762G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-760G = TK760G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-388G = TK388G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-378G = TK378G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-372G = TK372G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-370G = TK370G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-360G = TK360G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-278G = TK278G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-272G = TK272G_Radios [2017-02-13 16:38:24,351] chirp.directory - INFO: Registered Kenwood_TK-270G = TK270G_Radios [2017-02-13 16:38:24,352] chirp.directory - INFO: Registered Kenwood_TK-260G = TK260G_Radios [2017-02-13 16:38:24,352] chirp.directory - INFO: Registered Kenwood_TK-7102 = KenwoodTK7102Radio [2017-02-13 16:38:24,352] chirp.directory - INFO: Registered Kenwood_TK-8102 = KenwoodTK8102Radio [2017-02-13 16:38:24,354] chirp.directory - INFO: Registered Kenwood_TK-7108 = KenwoodTK7108Radio [2017-02-13 16:38:24,354] chirp.directory - INFO: Registered Kenwood_TK-8108 = KenwoodTK8108Radio [2017-02-13 16:38:24,355] chirp.directory - INFO: Registered Kenwood_TS-2000 = TS2000Radio [2017-02-13 16:38:24,355] chirp.directory - INFO: Registered BTECH_UV-5X3 = UV5X3 [2017-02-13 16:38:24,355] chirp.directory - INFO: Registered Baofeng_UV-6R = UV6R [2017-02-13 16:38:24,357] chirp.directory - INFO: Registered Baofeng_UV-B5 = BaofengUVB5 [2017-02-13 16:38:24,358] chirp.directory - INFO: Registered BTECH_UV-50X3 = UV50X3 [2017-02-13 16:38:24,358] chirp.directory - INFO: Registered Yaesu_VX-170 = VX170Radio [2017-02-13 16:38:24,358] chirp.directory - INFO: Registered Yaesu_VX-2 = VX2Radio [2017-02-13 16:38:24,359] chirp.directory - INFO: Registered Yaesu_VX-3 = VX3Radio [2017-02-13 16:38:24,361] chirp.directory - INFO: Registered Yaesu_VX-5 = VX5Radio [2017-02-13 16:38:24,361] chirp.directory - INFO: Registered Yaesu_VX-6 = VX6Radio [2017-02-13 16:38:24,361] chirp.directory - INFO: Registered Yaesu_VX-7 = VX7Radio [2017-02-13 16:38:24,362] chirp.directory - INFO: Registered Yaesu_VX-8_R = VX8Radio [2017-02-13 16:38:24,364] chirp.directory - INFO: Registered Yaesu_VX-8_DR = VX8DRadio [2017-02-13 16:38:24,364] chirp.directory - INFO: Registered Yaesu_VX-8_GE = VX8GERadio [2017-02-13 16:38:24,364] chirp.directory - INFO: Registered Vertex_Standard_VXA-700 = VXA700Radio [2017-02-13 16:38:24,368] elib.intl - DEBUG: Set environment variable 'LANG' to 'en_GB' ('kernel32.SetEnvironmentVariableW') [2017-02-13 16:38:24,368] elib.intl - DEBUG: Set environment variable 'LANG' to 'en_GB' ('msvcrt._putenv') [2017-02-13 16:38:24,368] elib.intl - DEBUG: Set environment variable 'LANG' to 'en_GB' ('msvcr90._putenv') [2017-02-13 16:38:24,496] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,496] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,497] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,497] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,497] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,497] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,499] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,499] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,499] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,499] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,499] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,500] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,500] chirp.ui.mainapp - INFO: Skipping existing stock config [2017-02-13 16:38:24,502] chirp.ui.reporting - DEBUG: Checking for updates [2017-02-13 16:38:25,035] chirp.ui.reporting - DEBUG: Server reports version daily-20170212 is latest [2017-02-13 16:38:49,046] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [1800000-2000000 160 Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ] [2017-02-13 16:38:49,046] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [1800000-1810000 Digimodes simplex , 1800000-1810000 Digital Modes simplex ] [2017-02-13 16:38:49,049] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons simplex mode: CW , 1999000-2000000 Beacons simplex ] [2017-02-13 16:38:49,049] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [3500000-4000000 80 Meter Band simplex , 3500000-4000000 80 Meter Band simplex ] [2017-02-13 16:38:49,053] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [7000000-7300000 40 Meter Band simplex , 7000000-7300000 40 Meter Band simplex ] [2017-02-13 16:38:49,056] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [10100000-10150000 30 Meter Band simplex , 10100000-10150000 30 Meter Band simplex ] [2017-02-13 16:38:49,058] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [10130000-10140000 All narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ] [2017-02-13 16:38:49,059] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [10140000-10150000 All modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ] [2017-02-13 16:38:49,059] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [14000000-14350000 20 Meter Band simplex , 14000000-14350000 20 Meter Band simplex ] [2017-02-13 16:38:49,063] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [18068000-18168000 17 Meter Band simplex , 18068000-18168000 17 Meter Band simplex ] [2017-02-13 16:38:49,065] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [21000000-21450000 15 Meter Band simplex , 21000000-21450000 15 Meter Band simplex ] [2017-02-13 16:38:49,068] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [24890000-24990000 12 Meter Band simplex , 24890000-24990000 12 Meter Band simplex ] [2017-02-13 16:38:49,069] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [28000000-28070000 CW simplex mode: CW , 28000000-28070000 CW simplex mode: CW ] [2017-02-13 16:38:49,071] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [28150000-28190000 All narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode: CW ] [2017-02-13 16:38:49,072] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [29000000-29200000 All modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode: AM ] [2017-02-13 16:38:49,072] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [29300000-29510000 Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ] [2017-02-13 16:38:49,075] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [1800000-2000000 160 Meter Band simplex , 1800000-2000000 160 Meter Band simplex mode: CW ] [2017-02-13 16:38:49,075] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [1800000-1810000 Digimodes simplex , 1800000-1810000 Digital Modes simplex ] [2017-02-13 16:38:49,075] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [1999000-2000000 Beacons simplex mode: CW , 1999000-2000000 Beacons simplex ] [2017-02-13 16:38:49,075] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [3500000-4000000 80 Meter Band simplex , 3500000-4000000 80 Meter Band simplex ] [2017-02-13 16:38:49,076] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [7000000-7300000 40 Meter Band simplex , 7000000-7300000 40 Meter Band simplex ] [2017-02-13 16:38:49,078] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [10100000-10150000 30 Meter Band simplex , 10100000-10150000 30 Meter Band simplex ] [2017-02-13 16:38:49,078] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [10130000-10140000 All narrow band digimodes simplex , 10130000-10140000 RTTY simplex mode: RTTY ] [2017-02-13 16:38:49,078] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [10140000-10150000 All modes, digimodes, no phone simplex , 10140000-10150000 Packet simplex ] [2017-02-13 16:38:49,078] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [14000000-14350000 20 Meter Band simplex , 14000000-14350000 20 Meter Band simplex ] [2017-02-13 16:38:49,079] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [18068000-18168000 17 Meter Band simplex , 18068000-18168000 17 Meter Band simplex ] [2017-02-13 16:38:49,081] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [21000000-21450000 15 Meter Band simplex , 21000000-21450000 15 Meter Band simplex ] [2017-02-13 16:38:49,082] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [24890000-24990000 12 Meter Band simplex , 24890000-24990000 12 Meter Band simplex ] [2017-02-13 16:38:49,082] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [28000000-28070000 CW simplex mode: CW , 28000000-28070000 CW simplex mode: CW ] [2017-02-13 16:38:49,084] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [28150000-28190000 All narrow band modes, digimodes simplex , 28150000-28190000 CW simplex mode: CW ] [2017-02-13 16:38:49,085] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [29000000-29200000 All modes, AM preferred simplex mode: AM , 29000000-29200000 AM simplex mode: AM ] [2017-02-13 16:38:49,085] chirp.ui.bandplans - WARNING: Bandplan North American Band Plan has duplicates [29300000-29510000 Satellite downlink simplex , 29300000-29510000 Satellite Downlinks simplex ] [2017-02-13 16:39:03,822] chirp.ui.mainapp - DEBUG: User selected Baofeng BF-F8HP on port COM1 [2017-02-13 16:39:03,967] chirp.ui.clone - DEBUG: Clone thread started [2017-02-13 16:39:04,019] chirp.drivers.uv5r - INFO: Sending Magic: 000: 50 bb ff 20 12 07 25 00 P.....%. [2017-02-13 16:39:04,111] chirp.drivers.uv5r - INFO: Valid response, got this: [2017-02-13 16:39:04,111] chirp.drivers.uv5r - DEBUG: 000: aa 30 76 04 00 05 20 dd .0v..... [2017-02-13 16:39:04,456] chirp.drivers.uv5r - INFO: Radio Version is 'HN5RV011\xff\xff\xff\xff\xff\xff' [2017-02-13 16:39:04,457] chirp.ui.reporting - DEBUG: Reporting exception [2017-02-13 16:39:04,457] chirp.ui.common - ERROR: -- Exception: -- [2017-02-13 16:39:04,459] chirp.ui.common - ERROR: Traceback (most recent call last): File "chirp\ui\clone.pyo", line 249, in run File "chirp\drivers\uv5r.pyo", line 707, in sync_in File "chirp\drivers\uv5r.pyo", line 526, in _do_download RadioError: Incorrect 'Model' selected. [2017-02-13 16:39:04,460] chirp.ui.common - ERROR: ---------------- [2017-02-13 16:39:04,460] chirp.ui.clone - ERROR: Clone failed: Incorrect 'Model' selected. [2017-02-13 16:39:04,476] chirp.ui.clone - DEBUG: Clone thread ended [2017-02-13 16:39:04,484] chirp.ui.reporting - DEBUG: Reporting model usage: Baofeng_BF-F8HP,download,True [2017-02-13 16:39:04,487] chirp.ui.reporting - DEBUG: Reporting exception [2017-02-13 16:39:04,487] chirp.ui.inputdialog - ERROR: --- Exception Dialog: Incorrect 'Model' selected. --- [2017-02-13 16:39:04,489] chirp.ui.inputdialog - ERROR: Traceback (most recent call last): File "chirpw", line 64, in <module> AttributeError: 'NoneType' object has no attribute 'split' [2017-02-13 16:39:04,489] chirp.ui.inputdialog - ERROR: ---------------------------- [2017-02-13 16:42:12,138] chirp.ui.mainapp - DEBUG: User selected Baofeng BF-F8HP on port COM1 [2017-02-13 16:42:12,269] chirp.ui.clone - DEBUG: Clone thread started [2017-02-13 16:42:12,321] chirp.drivers.uv5r - INFO: Sending Magic: 000: 50 bb ff 20 12 07 25 00 P.....%. [2017-02-13 16:42:12,403] chirp.drivers.uv5r - INFO: Valid response, got this: [2017-02-13 16:42:12,403] chirp.drivers.uv5r - DEBUG: 000: aa 30 76 04 00 05 20 dd .0v..... [2017-02-13 16:42:12,747] chirp.drivers.uv5r - INFO: Radio Version is 'HN5RV011\xff\xff\xff\xff\xff\xff' [2017-02-13 16:42:12,749] chirp.ui.reporting - DEBUG: Reporting exception [2017-02-13 16:42:12,749] chirp.ui.common - ERROR: -- Exception: -- [2017-02-13 16:42:12,750] chirp.ui.common - ERROR: Traceback (most recent call last): File "chirp\ui\clone.pyo", line 249, in run File "chirp\drivers\uv5r.pyo", line 707, in sync_in File "chirp\drivers\uv5r.pyo", line 526, in _do_download RadioError: Incorrect 'Model' selected. [2017-02-13 16:42:12,752] chirp.ui.common - ERROR: ---------------- [2017-02-13 16:42:12,752] chirp.ui.clone - ERROR: Clone failed: Incorrect 'Model' selected. [2017-02-13 16:42:12,773] chirp.ui.clone - DEBUG: Clone thread ended [2017-02-13 16:42:12,775] chirp.ui.reporting - DEBUG: Reporting model usage: Baofeng_BF-F8HP,download,True [2017-02-13 16:42:12,779] chirp.ui.reporting - DEBUG: Reporting exception [2017-02-13 16:42:12,779] chirp.ui.inputdialog - ERROR: --- Exception Dialog: Incorrect 'Model' selected. --- [2017-02-13 16:42:12,779] chirp.ui.inputdialog - ERROR: Traceback (most recent call last): File "chirpw", line 64, in <module> AttributeError: 'NoneType' object has no attribute 'split' [2017-02-13 16:42:12,780] chirp.ui.inputdialog - ERROR: ---------------------------- [2017-02-13 16:45:33,704] chirp.ui.mainapp - DEBUG: User selected Baofeng BF-F8HP on port COM1 [2017-02-13 16:45:33,834] chirp.ui.clone - DEBUG: Clone thread started [2017-02-13 16:45:33,885] chirp.drivers.uv5r - INFO: Sending Magic: 000: 50 bb ff 20 12 07 25 00 P.....%. [2017-02-13 16:45:33,967] chirp.drivers.uv5r - INFO: Valid response, got this: [2017-02-13 16:45:33,967] chirp.drivers.uv5r - DEBUG: 000: aa 30 76 04 00 05 20 dd .0v..... [2017-02-13 16:45:34,312] chirp.drivers.uv5r - INFO: Radio Version is 'HN5RV011\xff\xff\xff\xff\xff\xff' [2017-02-13 16:45:34,312] chirp.ui.reporting - DEBUG: Reporting exception [2017-02-13 16:45:34,313] chirp.ui.common - ERROR: -- Exception: -- [2017-02-13 16:45:34,313] chirp.ui.common - ERROR: Traceback (most recent call last): File "chirp\ui\clone.pyo", line 249, in run File "chirp\drivers\uv5r.pyo", line 707, in sync_in File "chirp\drivers\uv5r.pyo", line 526, in _do_download RadioError: Incorrect 'Model' selected. [2017-02-13 16:45:34,313] chirp.ui.common - ERROR: ---------------- [2017-02-13 16:45:34,315] chirp.ui.clone - ERROR: Clone failed: Incorrect 'Model' selected. [2017-02-13 16:45:34,335] chirp.ui.clone - DEBUG: Clone thread ended [2017-02-13 16:45:34,335] chirp.ui.reporting - DEBUG: Reporting model usage: Baofeng_BF-F8HP,download,True [2017-02-13 16:45:34,339] chirp.ui.inputdialog - ERROR: --- Exception Dialog: Incorrect 'Model' selected. --- [2017-02-13 16:45:34,338] chirp.ui.reporting - DEBUG: Reporting exception [2017-02-13 16:45:34,339] chirp.ui.inputdialog - ERROR: Traceback (most recent call last): File "chirpw", line 64, in <module> AttributeError: 'NoneType' object has no attribute 'split' [2017-02-13 16:45:34,341] chirp.ui.inputdialog - ERROR: ----------------------------

2 2

[chirp_users] email
by L B 26 Feb '17

26 Feb '17

mech5(a)gt.rr.com -- Image result for WHere to get ARRL logo L.B. Little *WB5YDA *President *Beaumont Amateur Radio Club - W5RIN* Ph: 409-782-3115 Email:mech5@gt.rr.com http://www.qsl.net/w5rin/ <http://www.qsl.net/W5RIN>

1 0

[chirp_users] FT 2900
by Tom Barton 23 Feb '17

23 Feb '17

I've been reading bug reports and have not been able to determine if the "Failed to communicate with radio: Failed to read header." on a TX Modded radio has been fixed or not. Running Windows 7 and the latest chirp build. Any help or suggestions appreciated. Tom B.

2 2

[chirp_users] FTM-100DR
by Philip 23 Feb '17

23 Feb '17

Can the FTM-100Dr be programmed with CHIRP? Perhaps using the supplied cable and the FTM-250R that is listed? Thanks.

1 0