- Users - lists.chirpmyradio.com

[chirp_users] bojie bj-218 device
by Emre Emre 16 May '17

16 May '17

hi I am using your program.The device i am using baojie bj-218. There is no device on the chirp menu. I would like you to add this device to your program. I look forward to your good news thank you nice a days.

1 0

[chirp_users] Bunch of questions
by Al Jones 15 May '17

15 May '17

Let me first apologize, I don’t really know what I’m talking about. Working with a friend who has two new Retivis RT5 radios – not a major problem. One radio allow me to change information relating to a channel, the other requires that I delete the channel and re-add it – funky but workable. Other minor hassles are that one is ver 1FP3-25 and the other is ver 1FB297; since he wants both radios the same, that’s not a problem, cut and paste from one img to the other and it’s done Since I use Chirp to program my radios - and some friends – I suggested he get it on his computer. Now the fun begins. He runs UBUNTU and while I’m somewhat familiar with Linux I got stopped cold. First error: access to USB0 denied (or words to that effect) chmod 777 /dev/usb0 fixed that. Second error: Ubuntu failed to communicate with radio. 'serial' object has no attribute 'settimeout' Pretty much stopped dead, however he has two versions of python on that computer python 2.7.12 and a python 3 (sorry didn’t get the full version). If I’m reading this correctly, if he were running python3 the above wouldn’t be a problem <that’s a question>; if that’s the case, how does he tell ubuntu / chirp to use py3? … Remember, I said I don’t know what I’m talking about, can someone guide?? Thanks //al I set both his radios up with my Windows box – so for the nonce we’re okay but he’d like to put in a lot more freqs (mistake!) and it’ll be a lot easier on him to have chirp running.

2 2

[chirp_users] Bunch of questions - part two
by Al Jones 15 May '17

15 May '17

I should have noted this in my earlier post – mea culpa When he downloads from the Ubuntu repository he gets Chirp Daily 20160110 – well over a year old. When he downloads the tarball from danplanet using the directions there the first two commands complete, the third gives an error – I’m thinking that he doesn’t have python-serial (and possibly python-libxml2) can some kind soul tell me how to tell him that he needs then and how / where to get them? //al

1 0

[chirp_users] Aviation radio programming
by Stokes Smith 14 May '17

14 May '17

Has anyone used CHIRP to program aviation radios? I recently obtained a Yaesu VXA-200 and would like to use CHIRP as I use it for my Wouxon radio. The Yaesu software is not readily available. Thanks for all y'all do! Chirp is a fantastic program. Stokes

4 4

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 12
by John A Diefenbach 13 May '17

13 May '17

I have two laptops; both DELL. One is W-7, the other: W-10. CHIRP & Baofengs program nicely on the W-7; not the W-10, 'tho I'm not surprised. Thoughts? On Sat, May 13, 2017 at 3:00 PM, <chirp_users-request(a)intrepid.danplanet.com > wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: Alinco DJ-G7 "T" (Fred) > 2. QYT KT 8900 (Richard Whittaker) > 3. QYT KT 8900 (Richard Whittaker) > 4. Re: QYT KT 8900 (Tycen Stafford) > 5. Re: QYT KT 8900 (Larry Lovell) > 6. Re: Yaesu FT-8100R Question (John LaMartina) > 7. Re: QYT KT 8900 (Tycen Stafford) > 8. QYT KT8900 (??? (Kris) Francisco) > 9. Re: QYT KT8900 (Jim Unroe) > 10. Re: QYT KT8900 (Tycen Stafford) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 12 May 2017 11:06:00 -0800 > From: Fred <fredferickson(a)gmail.com> > Subject: Re: [chirp_users] Alinco DJ-G7 "T" > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <20170512110600.7369aeda@hp-a1710n> > Content-Type: text/plain; charset=US-ASCII > > On Fri, 12 May 2017 09:10:56 -0700 > Daniel Curry <dod1450(a)mindspring.com> wrote: > > > I am unable to connect to my Alinco DJ-GT "T" hand held. Alinco > > programming software works with no problem. > > > > I guess that you mean the above to be interpreted as a question and a > request for help in using Chirp. > > I'm no expert and won't attempt to answer but: > > If you wish someone on this list to help you use Chirp to connect to > your radio, it probably would be a good idea to give them a bit more > information. > > What did you try specifically to do? What operating system? What > responses did Chirp give you? Which version of Chirp are you trying to > use? Have you been successful with Chirp before? Etc. > > > ------------------------------ > > Message: 2 > Date: Fri, 12 May 2017 16:39:01 -0700 > From: Richard Whittaker <richard(a)avits.ca> > Subject: [chirp_users] QYT KT 8900 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <05d3520f-38d9-4daa-a550-121a1aa9659b(a)avits.ca> > Content-Type: text/plain; charset="utf-8" > > Hi all. I bought a KT8900 at the beginning of the year, and my FTDI cable > showed up about a week ago. Eager to get more than 2 channels programmed in > (the programming interface sucks!), I plugged my cable in to the BACK of > the radio like all the sites say, and.... Nothing... Fiddle, fiddle, > fiddle, nothing. Different radio models, the whole works, radio would not > respond.? > > > My model has what the manual calls a data terminal jack on the front. > > > I tried it, the cable fit perfectly, and the radio responded just fine. I > don't know if this is true if all KT8900s, but if yours has a front jack, > it's a good idea to try it. > > > Cheers > > > Richard > > > VA7RHW. > > > > > ?Sent from BlueMail ? >

3 2

[chirp_users] QYT KT8900
by "クリス (Kris) Francisco" 13 May '17

13 May '17

Hi i buy KT8900 last month only my problem this morning is no TRansmit i try to program in chirp and reset all still the same they have recieve only no transmit, any body can help me? Im new in this Radio. Thank you KH0VL Sent from my iPhone

3 2

[chirp_users] Yaesu FT-8100R Question
by Alan 12 May '17

12 May '17

I do not see the Yaesu FT-8100R listed as a supported radio. Will Chirp work with my FT-8100R ? Thank you. Alan AA6DW

2 1

[chirp_users] Alinco DJ-G7 "T"
by Daniel Curry 12 May '17

12 May '17

I am unable to connect to my Alinco DJ-GT "T" hand held. Alinco programming software works with no problem.

2 1

[chirp_users] Programming a BTECH UV-50X2
by Bob DeFranco 12 May '17

12 May '17

I just ordered a BTECH UV-50X2 and was going to download the latest version of ChiRP to program it. Looking at the list of supported radios, however, I see the UV-50X3 and the UV-5001 (the predecessor to the UV-50X2) but not my radio. Which model should I select? I suppose I could just try different ones and see which works, but I worry about bricking the radio. Any advice? Bob DeFranco

5 8

[chirp_users] DJ-G7
by Daniel Curry 10 May '17

10 May '17

I am unable to program my DJ-G7 hand held. I get no response from the radio. But when I start it sees the com port and DJ-G7EG. -- Daniel Curry California American Legion Amateur Radio Area 2 Commission and Chairman. US Air Force Veteran IPV6 Sage Certified PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92 San Francisco/Silicon Valley AmprNet Co-coordinator [44.4.0.0/16]

1 0

[chirp_users] New Daily Build
by Build System 10 May '17

10 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170510 A list of the changes included in this build (since the last daily) follows: Changes for Build #480 [Dan Smith <dsmith(a)danplanet.com>] Add Rugged RH5R-V2 #4803

1 0

[chirp_users] Jingtong JT-5988HP support
by Shon Edwards 08 May '17

08 May '17

I'm patient and I don't need the support myself any more, but this would be a wonderful radio to get CHIRP working with. I know a lot of people would appreciate it very much. I bought the radio from Amazon a couple of months ago. I had the cable and software. I tried everything. Nothing worked. To give you an idea of what is necessary to program this radio correctly, I'll outline the steps below even this may not be directly on topic. I'm hoping to show just how difficult this radio is to program, so hopefully we can get some CHIRP support soon.. It's the only 12/10W (no one is sure which it really is) radio (HT) I know of. Anyway, here's how I stumbled on a way to program it: 1. I searched google until I found: http://prepari.org/?page= 5988HP#review-JT5988HP.html. 2. Get the disc out that comes with the radio or click here: htpps:// amazon.com/jt-5988/JT-5988+High+Mid+Low.rar and get ready to copy a driver from it to your HDD. 3. Install the s/w. (it's better than the Chinese s/w for programming) 4. Watch the video on how to set up a com port: JT-5988HP-com-port-setup_ HTML-video.mp4. 5. Click on setup. 6. Click on communication port. 7. Select an available com port and number one will be deselected, then OK. 8. Put the Chinese disc in your drive that came with the radio. 9. Click on the subdirectory (folder): USB驱动. Then click on the folder labeled CH340. Find the executable file CH341SRE.exe. You can not run it from its current position because of all the Chinese characters in the path. Copy it to your hard drive and then run it. Install the driver. Click on OK. If you want to see that it's there, I'm tired of writing steps, but you get the picture. 73 de Shon K6QT Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA Home phone: (801) 444-3445 E-mail: sre.1966(a)gmail.com or Shon Edwards 715 Strawberry Creek Private Rd. Bedford, WY 83112 Cell: (307) 248-2104

1 0

[chirp_users] UV-82HP settings question
by Tom Norris 08 May '17

08 May '17

In CHIRP I have Settings > Basic Settings > Display Mode A: 'Name' and Settings > Basic Settings > Display Mode B: 'Frequency' Is there a setting that will allow the Display Mode B: frequencies to stay in sync with Display Mode A: 'Name' when the unit is in Scan mode? Thanks, Tom NB5Q

2 1

[chirp_users] Help
by Brewster 08 May '17

08 May '17

I recently purchased a QYT KT 7900D radio and uploaded frequencies to it using the latest version of CHIRP. The problem is that all the frequencies go into all of the four different bands. The radio as described has four "channels", A-D. What I am trying to do is assign the 2 meter band to channel A, the 220 Mhz band to channel B, the FRS/MURS/GMRS frequencies to channel C, and the 440 Mhz band to channel D. Has anyone had any experience with this radio and frequency allotments such as I describe? Thanks, Bruce AD8K

7 13

[chirp_users] Icom ID-5100, any work on it?
by Chuck Hast 08 May '17

08 May '17

I have one and sure would like to be able to put channels into the SD card that stores the channels (actually sort of a backup to the on board storage) I can send someone files that the Windows program generates which you then copy to the SD card, and then place the SD card in the radio and read it. I can even send you a copy of the original Windows program if you want, (It is free anyhow) I have programmed the radio with the software but find it easier just to pull out the SD card, load it and be done. Would rather do it under Linux rather than have to deal with Windows stupidity. I sure wish I knew how to code as I would have tried my hand at it but I do not.

1 0

[chirp_users] CHRIP and Icom ID-51A Plus - Out of sync with radio
by Noah B 08 May '17

08 May '17

Hi there, I've been trying to connect to my Icom ID-51A Plus with CHIRP and I'm getting this message in Windows 7, MacOS, and Linux: "An error has occurred Failed to communicate with the radio: Out of sync with radio" I'm using a Valley Enterprises Icom OPC-2218LU USB FTDI Chipset cable which works under Windows 7 with the Icom CS51-PLUS software that came with the radio. I've tried connectin in clone mode and not in clone mode, and I'm using CHIRP version daily-20170501. After some poking around on the website, mailing list, and issue tracker, I'm not certain if CHIRP is supposed to be working with this radio. Any suggestions? I'm really hoping that I can get CHIRP working so I can avoid using the Icom software... Thanks! Noah

1 0

[chirp_users] Baofeng GT3-DMR
by David Stapp 08 May '17

08 May '17

Hello, I am trying to use Chirp to configure a Baofeng GT3-DMR radio, but was not able to establish communications. Does Chirp support the radio? If yes, what model should I use for the upload? Thank you for your assistance. Dave Stapp dstapp(a)att.net Phone: 973.723.3422

4 4

[chirp_users] Kenwood TH-D74
by Nigel Johnson MIEEE 07 May '17

07 May '17

Is anybody working on it? I am on vacation now and could help. I have a D74 but am not a python programmer. It's C for me. If someone could give me a few pointers I could play with it myself, or I could let somebody ssh into my system and read/write to ACM0 I have tried the Windows MCP-D74 software from Kenwood but can only run it under Virtual Box and it is mediocre at best from day to day. I have 22 nodes n my network and not a single windows! I live in Canada so shipping it to a volunteer would be a pain. 73 de Nigel ve3id -- Nigel Johnson MSc., MIEEE VE3ID/G4AJQ/VA3MCU Amateur Radio, the origin of the open-source concept! You can reach me by voice on Skype: TILBURY2591 If time travel ever will be possible, it already is. Ask me again yesterday This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way. Please consider the environment when deciding if you really need to print this message

2 1

[chirp_users] Raspberry pi
by Patrick Brown 07 May '17

07 May '17

Does anyone use Chirp on Raspberry pi ? -- Patrick Brown YCSRT 3213 N7FHB Wilhoit 145.350 Wildflower SYCSRT TEAM Manager http://ycsrt.org T.E.A.M = Together Everyone Accomplishes More

3 7

Re: [chirp_users] off topic hardware question
by Thom LaCosta 07 May '17

07 May '17

At 09:49 AM 5/6/2017, you wrote: >After digging mine out, they are all labeled as to the frequency >range. The ones with the white ring are 220, the ones with the black >ring are 144/440. Thanks! Thom

1 0

Re: [chirp_users] off topic hardware question
by Steve Bosshard (NU5D) 06 May '17

06 May '17

Easiest way would be to use a cheap field strength meter - kinda like the $20 CB SWR meters with a short whip to get a relative strength indication - the correct antenna will have a noticeably greater field strength - in a pinch I once used a Simpson 260 in the AC range setting and the test leads for an antenna - crude but useful. nu5d -- *✞ ΙΧΘΥΣ* <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

1 0

[chirp_users] off topic hardware question
by Thom LaCosta 06 May '17

06 May '17

Sorry for the off topic...I just purchased a UV-5X3. How do I identify which antenna is for 220? There are two unlabeled whips, one has a black inner core at the connector,,,the other is white, and I can't read the label. thanks Thom k3hrn

5 6

[chirp_users] DM 5R
by Sarge ex 7thAF 06 May '17

06 May '17

Is this radio programmable by Chirp ? Thanks -- Sarge KE5YPB, Lickskillet, Texas "All it takes for evil to triumph is for good men to do nothing." " Lets Roll " ---- Todd Beemer--- 9/11/01 --- American Hero Are you going to take a stand to help America?

3 2

[chirp_users] CHIRP VHF / UHF band "low / high" band limits ?
by Constable John Vith 06 May '17

06 May '17

We are a state law enforcement office using CHIRP to program "QYT - KT 8900 D" units for use in our prisoner transport and patrol vehicles. Our area (Greater Pittsburgh, PA) is one of the few areas nationwide where due to congestion the "T-Band" UHF (480 - 520 Mhz) is in use. Under the "Settings - Other Setting" tabs on CHIRP the band limits are "grayed out", preset to 136 - 174 Mhz VHF and 400 - 480 Mhz UHF. How can we change the "high" (upper) band limit for UHF from 480 Mhz to 520 Mhz ?

6 9

[chirp_users] Can't upload to FT-60R
by John Perry 03 May '17

03 May '17

Hello Everyone! I have an issue with CHIRP not being able to upload to my FT-60R. It will download just fine but I get an error when I try to upload to the radio. I also have the FT-60 Commander software that works fine but I had to change it to the "Alternate Upload Method" Any thoughts or suggestions? -- John Perry - WX5JP

6 17

[chirp_users] BF 888s and UV5R
by Nate Alvin 03 May '17

03 May '17

About 6 weeks ago, i purchased the 2 radios listed in the subject line to test them out for work. I programmed them both to the frequencies assigned to our license. We were assigned a corporate license recently, with different frequencies, vs our stand alone site license which is going to expire. Using the same computer, same "fake prolific" Baofeng cloning cable and the updated daily CHIRP software i was able to reprogram the UV5R, but when i went to read the BD888S i received the error message "radio refused to enter programming mode". Any help would be appreciated. Thanks

7 16

Re: [chirp_users] BF-F8HP
by Baji Panchumarti 02 May '17

02 May '17

Chere, to whom are you trying to transmit ? Directly to another radio via simplex, or to a repeater ? Have you checked the following: - Correct Receive & Transmit freq settings - Correct CTCSS / DCS tones for Transmit / Receive ? Did you program your radio manually or using CHIRP ? -baji. ~~ K 8 I I T _ On Tue, May 2, 2017 at 1:40 PM, Chere McCoy <agedog1(a)hotmail.com> wrote: I have a Baofeng BF-F8HP I can receive but not transmit > What settings have I messed up and how do I fix it > > 73. Km4Uuq > --

1 0

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 1
by Chere McCoy 02 May '17

02 May '17

I have a Baofeng BF-F8HP I can receive but not transmit What settings have I messed up and how do I fix it 73. Km4Uuq chirp_users-request(a)intrepid.danplanet.com wrote: Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Unable to Install CHIRP software to Windows 10 (Torbj?rn Darre) 2. Re: Unable to Install CHIRP software to Windows 10 (Jim Unroe) 3. Re: Unable to Install CHIRP software to Windows 10 (Jim Unroe) 4. Transmit Problems (DonieAllen1971(a)Yahoo.com) 5. Re: Transmit Problems (Glenn At Home) 6. Re: Transmit Problems (Mike McRoberts) 7. Re: Transmit Problems (Daniel Humphries) 8. Re: Transmit Problems (Jardy) 9. Re: Transmit Problems (Jardy) 10. Re: Transmit Problems (Carrie Jackson) 11. Re: Transmit Problems (kc6iih(a)aol.com) 12. Re: Transmit Problems (Jardy) 13. New Daily Build (Build System) 14. Re: Transmit Problems (Jim Unroe) 15. Re: Transmit Problems (Bill KA8VIT) 16. BF 888s and UV5R (Nate Alvin) 17. Re: BF 888s and UV5R (Neil B) 18. Re: Transmit Problems (Baji Panchumarti) 19. Re: BF 888s and UV5R (Nate Alvin) 20. Re: BF 888s and UV5R (Neil B) ---------------------------------------------------------------------- Message: 1 Date: Sun, 30 Apr 2017 21:02:59 +0200 From: Torbj?rn Darre <torbjorn.darre(a)lyse.net> Subject: Re: [chirp_users] Unable to Install CHIRP software to Windows 10 To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <203c-59063500-1-47a73600@189506587> Content-Type: text/plain; charset="utf-8" Hei, The error is Error reporting is enabled and it does does not open the software. Yes my Windows user does contain ?.? My e-mail adresses does not contain ? and my CHIRP user does not contain ?.? I will try to make a new windows account user with out ? and see if that works. 73, Torbj?rn LA8TP S?ndag 30. April 2017 16:20 CEST skrev Jim Unroe <rock.unroe(a)gmail.com>: ?On Sun, Apr 30, 2017 at 8:21 AM, Torbj?rn Darre <torbjorn.darre(a)lyse.net> wrote: > Hei, > > I am new to CHIRP web site and CHIRP software. > I got an error when I down loaded the CHIRP software to my Windows10 PC. I > am not able to open the software when I have done a succefull and complete > installation. > What do I need to do? > > 73, > Torbj?rn, > LA8TP So what is the error? Does you Windows user name have the "?" character in it? If yes, try another user with only standard characters. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Torbjoern Darre at torbjorn.darre(a)lyse.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- hilsen Torbj?rn

1 0

Re: [chirp_users] Transmit Problems
by Baji Panchumarti 01 May '17

01 May '17

You may find the two links below helpful: http://www.hamuniverse.com/w7dtguv5rprogramming.html I haven't seen the entire video below, but it seems to be on the right track: https://www.youtube.com/watch?v=ml6cyOjBTHY -baji. ~~ On Mon, May 1, 2017 at 7:32 AM, Bill KA8VIT wrote: Not sure what your friend's radio is but it sounds like they may have CTCSS > or PL turned on. > > 73 - Bill KA8VIT > > > > On April 30, 2017 at 9:21 PM Jake via chirp_users wrote: > > > > In a few weeks some friends and I are going on a 10 day camping trip. We > will be several miles back into a wooded area. I would like to use my use > my Baofeng UV-5RA during this trip to communicate with my buddies radio he > picked up from a surplus store. I can receive his transmissions but he > cannot receive my transmissions. I am not sure what setting to adjust in > chirp. > > > > Below is a list of the settings I set in CHIRP for this channel. > > > > Name = TripFreq > > > > Frequency = 462.562500 > > > > Mode = NFM > > > > Power = Low > > > > > > ___

1 0

[chirp_users] Transmit Problems
by DonieAllen1971＠Yahoo.com 01 May '17

01 May '17

In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp. Below is a list of the settings I set in CHIRP for this channel. Name = TripFreq Frequency = 462.562500 Mode = NFM Power = Low

9 10

[chirp_users] New Daily Build
by Build System 01 May '17

01 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170501 A list of the changes included in this build (since the last daily) follows: Changes for Build #479 [SASANO Takayoshi <uaa(a)mx5.nisiq.net>] previous patch for bug #4687 causes PEP8 regression problem, "E261 at least two spaces before inline comment". Replace a tab character to two spaces to fix the problem. [Dan Smith <dsmith(a)danplanet.com>] Revert accidental commit #0 Backed out changeset f9a81de5297b

1 0

[chirp_users] Unable to Install CHIRP software to Windows 10
by Torbjørn Darre 30 Apr '17

30 Apr '17

Hei, I am new to CHIRP web site and CHIRP software. I got an error when I down loaded the CHIRP software to my Windows10 PC. I am not able to open the software when I have done a succefull and complete installation. What do I need to do? 73, Torbjørn, LA8TP

3 5

[chirp_users] New Daily Build
by Build System 30 Apr '17

30 Apr '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170430 A list of the changes included in this build (since the last daily) follows: Changes for Build #478 [Ray Cielencki <rayslinky(a)gmail.com>] [VX-3] fix bank_used issue #1203 This patch works around #1203 -- where banks are not properly marked as used. Additionally, it corrects how bank_used values are calculated. [SASANO Takayoshi <uaa(a)mx5.nisiq.net>] Bug#4771, add high-speed (38400bps) cloning to IC-P7 [SASANO Takayoshi <uaa(a)mx5.nisiq.net>] Bug #4769 remove meaningless _mem.set_raw("\x00" * (_mem.size() / 8)) line, all elements are filled when setting/emptying entry. [Richard Birch <n7uoa.birch(a)gmail.com>] [vx5] Corrected checksum and added prompts Fixes #4749 [Dan Smith <dsmith(a)danplanet.com>] Add Rugged RH5R G2 #0

1 0

Re: [chirp_users] Programming ICOM V80 HT.
by Baji Panchumarti 28 Apr '17

28 Apr '17

4 year old email from Dan-the-man ! http://intrepid.danplanet.com/pipermail/chirp_users/2013-May/003719.html You should look around and see if someone got around testing it, or perhaps you could offer to test it. Good luck ! -baji. ~~ K 8 I I T _ On Fri, Apr 28, 2017 at 6:02 AM, John Mehl <ke4egc(a)gmail.com> wrote: The ICOM V80 is not listed as a supported model. Is it programmable using > some other model ID. > > Thanks John .M. > > _______________________________________________

1 0

[chirp_users] Programming ICOM V80 HT.
by John Mehl 28 Apr '17

28 Apr '17

The ICOM V80 is not listed as a supported model. Is it programmable using some other model ID. Thanks John .M.

1 0

[chirp_users] Oh Happy Day !!!!
by Bruce LeGrande 27 Apr '17

27 Apr '17

⁣ Finally got the Ubuntu mini.iso to d/l without error, got a FULL INSTALL of Ubuntu v16.04 on a USB Thumb, got Dans ppa set in the repository, and got 'chirp-daily' to d/l and install..... (thanks to the wifi at Buddha Thai Kitchen in Middletown - best Thai food in the area) Yippee !!!!! Looks like my radios shall finally get programmed... Checked the BTech UV-5X3, the UV-82HP, and have spent the remainder of the afternoon researching freqs and programming the Leixen VV-898S... Need to order the cable for the VX-8DR (Yaesu), and the UV-50x3 (BTech) in the truck, but I see those in the list in Chirp, so I'm very hopeful at this point... Perhaps it's time for good things to start happening here... FINALLY !!! Thanks for putting up with my rants over the last year+... Thanks to all that offered input. And those that silently prayed. 73 - Bruce Sent from BlueMail

4 3

[chirp_users] FT2900
by Eric Chopin 26 Apr '17

26 Apr '17

Greetings again CHIRP'rs I now have a Yaesu FT2900 that I would like to program with CHIRP. I have a Prolific cable and found the 'pin out' on the mike socket ( #4 GRD - #6 CLONE) I go through the sequence to get the radio into 'CLONE' mode and then to 'TX' but the response I get from CHIRP is "The radio is not responding" and "ERROR" on the radio LCD readout. Any offers? 73's Eric

2 2

[chirp_users] FT 270
by Eric Chopin 26 Apr '17

26 Apr '17

Hello Jardy & Todd thank you for the info, I found the pinout diagram and have used a RTSystem cable and their software which all works well. Did not have any luck with CHIRP :-( 73's Eric P.S. I am about to present you all with another request in my next emaail!

1 0

[chirp_users] FT270 programming
by Eric Chopin 25 Apr '17

25 Apr '17

Thanks Baji for the link.... I checked it out and could not locate the file that is mentioned in the 'reddit url.' using CMD prompt in Windows XP... Windows could not locate the file anywhere. I have a couple of Prolific usb dongles that I can wire to usb... but would need the 'pin-outs' for the FT270 Jack plug (TX-RX-GND). Maybe someone out there can help out with a diagram? 73's Eric VE7ECJ

3 2

Re: [chirp_users] Yaesu FT-270
by Baji Panchumarti 25 Apr '17

25 Apr '17

The post at the link below refers to FT-270R & not FT-270, but you may be able to find some additional info: https://www.reddit.com/r/amateurradio/comments/3c49vf/chirp_with_the_yaesu_… -baji. _ On Tue, Apr 25, 2017 at 11:50 AM, Eric Chopin <echopin27(a)gmail.com> wrote: Yeap, i tried with Prolific and FDI and no luck with CHIRP....I have a RT > USB cable and was lent the programming CD by a friend and it all worked > ok...but only with the RT cable & software. > > I would still rather use CHIRP as all my other radios are programmed with > it and also to show my appreciation to all the great CHIRP guy's & girls > out there :-) > > On Mon, Apr 24, 2017 at 12:00 PM, <chirp_users-request@intrepid. > danplanet.com> wrote: > >> >> >> Today's Topics: >> >> 1. FT270R (Eric Chopin) >> 2. Re: FT270R (Todd Bloomingdale) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Sun, 23 Apr 2017 17:53:26 -0700 >> From: Eric Chopin <echopin27(a)gmail.com> >> Subject: [chirp_users] FT270R >> To: chirp_users(a)intrepid.danplanet.com >> Message-ID: >> <CAFe93E1QkcC7y1sFFXbG7XwNqVAadKSj7FOjQgVriGr9sLPgbA(a)mail.gm >> ail.com> >> Content-Type: text/plain; charset="utf-8" >> >> Greetings Don, >> >> You mention that you are able to program your FT270 by selecting 160 in >> CHIRP; what cable are you using? I have an RTSystems USB cable but have no >> success using CHIRP to connect by selecting the FT 160. >> The message I get is either 'Radio did not respond' or 'Unable to load >> header' >> >> Any suggestions? >> >> 73's >> Eric >> VE7ECJ >>

1 0

Re: [chirp_users] chirp_users Digest, Vol 100, Issue 20
by Eric Chopin 25 Apr '17

25 Apr '17

Yeap, i tried with Prolific and FDI and no luck with CHIRP....I have a RT USB cable and was lent the programming CD by a friend and it all worked ok...but only with the RT cable & software. I would still rather use CHIRP as all my other radios are programmed with it and also to show my appreciation to all the great CHIRP guy's & girls out there :-) On Mon, Apr 24, 2017 at 12:00 PM, < chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. FT270R (Eric Chopin) > 2. Re: FT270R (Todd Bloomingdale) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 23 Apr 2017 17:53:26 -0700 > From: Eric Chopin <echopin27(a)gmail.com> > Subject: [chirp_users] FT270R > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CAFe93E1QkcC7y1sFFXbG7XwNqVAadKSj7FOjQgVriGr9sLPgbA@mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > Greetings Don, > > You mention that you are able to program your FT270 by selecting 160 in > CHIRP; what cable are you using? I have an RTSystems USB cable but have no > success using CHIRP to connect by selecting the FT 160. > The message I get is either 'Radio did not respond' or 'Unable to load > header' > > Any suggestions? > > 73's > Eric > VE7ECJ >

1 0

[chirp_users] FT270R
by Eric Chopin 23 Apr '17

23 Apr '17

Greetings Don, You mention that you are able to program your FT270 by selecting 160 in CHIRP; what cable are you using? I have an RTSystems USB cable but have no success using CHIRP to connect by selecting the FT 160. The message I get is either 'Radio did not respond' or 'Unable to load header' Any suggestions? 73's Eric VE7ECJ

2 1

[chirp_users] Kg uv8d plus
by danilo piovan 20 Apr '17

20 Apr '17

Hi I tried to connect chirp with wouxun uv8d plus version without success. ...is this version of uv8d programmable with chirp ? Thanks

2 2

[chirp_users] New User of Chirp
by KEVIN HILLMAN 20 Apr '17

20 Apr '17

Hello to the Group: I just rec'd a Baofeng UV-5R from China, and would like to request information on what the best programming software to use for it. I am hoping to find a program that is not too complex to install and get running. Thanks for your help. Kevin VE7WD

6 5

[chirp_users] No support for UV-82c in most recent versions?
by Daniel Humphries 20 Apr '17

20 Apr '17

I downloaded the daily build of CHIRP 20170414 and proceeded to connect my uv-82c, I didn't think much about the radio list only showing uv-82 and uv-82hp, but when I couldn't get my radio to connect I started to suspect I have a problem. I won't entirely discount the programming cable, but it's not a prolific chipset, it's a CP2102 and I've used it for programming other devices so I know it works, but I have not used this cable with CHIRP so I'm not sure if I have a communication issue, or a model support issue. I looked at the model support page and I can't find the C version as a supported radio. I looked through several of the old versions and couldn't find one that supports the UV-82C anywhere. What version do I need to install to program a UV-82C and where do I find it? Thanks, Daniel

2 1

[chirp_users] New Daily Build
by Build System 20 Apr '17

20 Apr '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170420 A list of the changes included in this build (since the last daily) follows: Changes for Build #477 [Tom Hayward <tom(a)tomh.us>] [TK-270] Refactor for simplicity and readability. #4731 - Rename radio ID function of obviousness. - Use standard string reversal trick instead of for loop. [Tom Hayward <tom(a)tomh.us>] [TK-760G] Unobfuscate valid character filter. #4731

1 0

[chirp_users] Yaesu FT 270R
by Eric Chopin 19 Apr '17

19 Apr '17

Hello CHIRPers I have a Yaesu FT 270R and tried to program it via CHIRP...but it looks like this model is not covered. Any wizards out there that will be adding this model to the programming list in CHIRP in the not too distant future? 73's Eric

4 4

[chirp_users] Wouxun KG-UV8E
by D.J.J. Ring, Jr. 19 Apr '17

19 Apr '17

Hello CHIRPers. This Wouxun KG-UV8E is a wonderful radio. It's tri-band, nice. I've tried through two former radio officer friends who live in Hong Kong to get in touch with the engineer at Wouxun to see if he would provide CHIRP devs some info on their software control scheme. No luck, despite continued tries. I still have mine up for offer to loan and I have the programming software and cable. I'm almost going to either sell this or buy R/T software just so I can import from other radios. Anyone interested? 73 David N1EA

1 0

[chirp_users] sub-channel using chirp
by Jim McIver 19 Apr '17

19 Apr '17

I saw a video on how to put a sub channel(for lack of a better word) on and FRS channel using the keypad, and wondered if there was a way to do it with chirp. See attached. thx in advance, -jm

2 1

[chirp_users] Ubuntu Zesty
by terry＠mylakeroyale.com 19 Apr '17

19 Apr '17

Hi, Looking for some guidance from the Linux gurus. Linux newbie here. I have zesty installed and I added the chirp repository from the install page. During updates I get a failed to fetch error. My chirp is from 1/24/2017. Of course my radio template is one of the newer ones so not in this version. It is in the latest windows build. How can I get an ubuntu update? Thanks Terry Sent from my iPhone

3 2