- Users - lists.chirpmyradio.com

[chirp_users] missing libxml2 Debian MX
by Galen Thurber 11 Jun '19

11 Jun '19

# python chirpw Traceback (most recent call last): File "chirpw", line 24, in <module> from chirp.drivers import * File "/home/galen/chirp-daily/chirp/drivers/generic_xml.py", line 17, in <module> import libxml2 ImportError: No module named libxml2 libxml2 is installed what am I missing? -- Hi I've been on-line since late 1992. I'm a: Skeptic, Secular Humanist, Bright R.I.P. Reject Identity Politics My computer recommendations: MX Linux <https://mxlinux.org/i> operating system, Passwordsafe <https://www.pwsafe.org/>, Pidgin Internet Messenger, tor anonymous browsing bundle. ALERTS: Fact or fiction <http://snopes.com>? SCAM <http://quackwatch.com> Supplements Complimentary Alternative Medicine These companies have unjustly life-banned me: Eastlink, Facebook,Yahoo!, Microsoft Chat XMPP: galen(a)jabber.at

2 5

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 8 Message: 4
by Christopher F. Beesley 10 Jun '19

10 Jun '19

That's not right John. You can hear FAX data if you know where to look, you can hear Packet Radio, and you can hear computer programs if you've still got a home computer from the 80's. They, and others, are all serial data and as you can hear them then they must be in the audio spectrum. Closer to our homes as Radio Amateurs, even Morse Code is a form of serial data. Most of it can be controlled by a volume control as fitted to cassette players, CW receivers, and Packet Radio transmitters and receivers. If the volume control was turned down to zero, you wouldn't hear anything from any of them. Nor would the computer, the TNC or the FAX machine. Which is all very well, but I'm inclined to believe the people who say that the data in/out connectors on hand-helds don't use the audio channels (speaker and microphone) because a) its an obvious way to ensure data coms reliability, and b) its the way I would do it. But... The accountants would argue that the two extra terminals fitted to each of several million radio sets would amount to millions of yen in lost profit. So the early versions might be as designed by the engineers, i.e. two distinct interfaces (audio and data) but the later versions might be made to the lower specification as defined by the accountants. I can therefore see a case where, if you've got a later version, you would need to adjust the volume control when programming the memories. Two solutions: a) make sure your manual applies EXACTLY to the model you've got, especially if bought second-hand, and b) experiment. I'm sure other solutions are available from a variety of sources. Message: 4 Date: Sat, 8 Jun 2019 20:53:01 -0400 From: John Kemker <kemkerj3(a)gmail.com> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CA+r6kYQu-CNcRGVpdJ0AYbF1rtFhfUx+CxG8ft4bN4FRvORe0g(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" exactly The data is serial data, which is not in the audio spectrum. There's no "modem" on either end of the cable. It's straight RS-232C data as might come out of the back of an older PC. Volume has nothing to do with it, as it's either "on" or "off." ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: 10 June 2019 19:00 To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 126, Issue 8 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: chirp_users Digest, Vol 126, Issue 7 (jeff riddlebaugh) 2. Re: chirp_users Digest, Vol 126, Issue 7 (Glenn At Home) 3. Re: chirp_users Digest, Vol 126, Issue 7 Chirp (Gary Craig) 4. missing libxml2 Debian MX (Galen Thurber) 5. Re: missing libxml2 Debian MX (Barry Jackson) 6. Re: chirp_users Digest, Vol 126, Issue 7 (Jim Unroe) 7. Re: missing libxml2 Debian MX (Barry Jackson) 8. Re: BF888 Settings tab items not saved (George Reywer) ---------------------------------------------------------------------- Message: 1 Date: Sun, 9 Jun 2019 19:22:56 +0000 From: jeff riddlebaugh <jeff630(a)live.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <DM6PR19MB3339D1A03CAEB4EBD031E86799120(a)DM6PR19MB3339.namprd19.prod.outlook.com> Content-Type: text/plain; charset="windows-1252" I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don?t know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R. Thanks jeff Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: Sunday, June 9, 2019 3:00:03 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 126, Issue 7 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: UV-5R and volume. (JD Morrow) 2. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 3. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 4. Re: UV-5R and volume. (John Kemker) 5. Adding 2m and 70cm repeaters (David) 6. Re: Adding 2m and 70cm repeaters (Jim Unroe) 7. Re: Adding 2m and 70cm repeaters (David) 8. Re: Adding 2m and 70cm repeaters (Amnon Zohar) 9. BF888 Settings tab items not saved (Barry Jackson) 10. Yaesu ft-2dr programming cable (Rodney D. Myers) ---------------------------------------------------------------------- Message: 1 Date: Sat, 8 Jun 2019 16:16:55 -0400 From: "JD Morrow" <ngauge75(a)verizon.net> Subject: Re: [chirp_users] UV-5R and volume. To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <62FFB68360F84463A8D8FFCE40A3C5D4@Laptop15> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original All, Have been programming multiple (15+/-) UV-5's, for our group, for several years. Never have had to mess with the volume. Versions of hardware at the beginning was the worst. Cables and drivers, were a pain for a while to, but not the radio controls. 73's JD k2txv -----Original Message----- From: Jim Unroe Sent: Saturday, June 8, 2019 1:22 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV-5R and volume. On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data > is being communicated to/from the radio over the external radio audio > port, the radio volume control needs to be set midrange for the cable to > "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG The digital data is proviced on connections that have nothing to do with the connections for the analog speaker audio or the analog microphone audio. In addition to the audio wires (that aren't included in the programming cable since they are not necessary to have for programming) and the data wires, there is even a connection that provides DC voltage (5V or 3.3V depending on the radio) to power external devices. http://www.miklor.com/COM/UV_Technical.php#spkrmic Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at ngauge75(a)verizon.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com ------------------------------ Message: 2 Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Don Goodrich <don.goodrich(a)cheerful.com> Message-ID: <2139978547.224644.1560028246453(a)email.ionos.com> Content-Type: text/plain; charset="utf-8" Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode. > On 08 June 2019 at 12:48 Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG > > > > > Sent: Saturday, June 08, 2019 at 7:12 AM > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com>, "Dennis Wage" <dwage(a)dwage.com> > Subject: Re: [chirp_users] UV-5R and volume. > > True. The setting of the volume control has NOTHING to do with programming. > > If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it. > > > > > > On 08 June 2019 at 06:54 Dennis Wage <dwage(a)dwage.com> wrote: > > > > Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. > > > > Let's once and for all dispel or confirm this. > > > > I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. > > > > Please confirm or deny. > > > > Thanks, > > > > Dennis M. Wage (W9BOQ) > > > > 245 Corum Hill Road > > Castalian Springs, TN 37031 > > (615) 310-4242 Cell > > (615) 562-5128 Home > > http://hammondb3organ.net/ > > http://overdubs.net > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > > > > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich(a)cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net

1 0

Re: [chirp_users] BF888 Settings tab items not saved
by George Reywer 10 Jun '19

10 Jun '19

Hi Barry, A change in the firmware of the BF-888S has resulted in the contents of the settings tab not being correctly saved to the radio. (It also resulted in the voice prompt language changing to Chinese on the newer radios I programmed.) The work around is to change these settings manually on the radio as follows: * On channel 10, Press and Hold the PTT and MONI buttons while switching ON the transceiver to activate/deactivate Voice Prompts. * On channel 15, Press and Hold the PTT and MONI buttons while switching ON the transceiver to change Voice Prompt Language George M0IAS ------------------------------------------------------------- Hi, Has anyone had an issue with Baofeng 888 items on the settings tab (not memories) not being saved on upload? I am primarily trying to disable voice prompts, however after editing the downloaded image and uploading it, the next time I download it, the setting has reverted (or was never saved).

1 0

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7
by jeff riddlebaugh 10 Jun '19

10 Jun '19

I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don’t know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R. Thanks jeff Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: Sunday, June 9, 2019 3:00:03 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 126, Issue 7 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: UV-5R and volume. (JD Morrow) 2. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 3. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 4. Re: UV-5R and volume. (John Kemker) 5. Adding 2m and 70cm repeaters (David) 6. Re: Adding 2m and 70cm repeaters (Jim Unroe) 7. Re: Adding 2m and 70cm repeaters (David) 8. Re: Adding 2m and 70cm repeaters (Amnon Zohar) 9. BF888 Settings tab items not saved (Barry Jackson) 10. Yaesu ft-2dr programming cable (Rodney D. Myers) ---------------------------------------------------------------------- Message: 1 Date: Sat, 8 Jun 2019 16:16:55 -0400 From: "JD Morrow" <ngauge75(a)verizon.net> Subject: Re: [chirp_users] UV-5R and volume. To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <62FFB68360F84463A8D8FFCE40A3C5D4@Laptop15> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original All, Have been programming multiple (15+/-) UV-5's, for our group, for several years. Never have had to mess with the volume. Versions of hardware at the beginning was the worst. Cables and drivers, were a pain for a while to, but not the radio controls. 73's JD k2txv -----Original Message----- From: Jim Unroe Sent: Saturday, June 8, 2019 1:22 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV-5R and volume. On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data > is being communicated to/from the radio over the external radio audio > port, the radio volume control needs to be set midrange for the cable to > "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG The digital data is proviced on connections that have nothing to do with the connections for the analog speaker audio or the analog microphone audio. In addition to the audio wires (that aren't included in the programming cable since they are not necessary to have for programming) and the data wires, there is even a connection that provides DC voltage (5V or 3.3V depending on the radio) to power external devices. http://www.miklor.com/COM/UV_Technical.php#spkrmic Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at ngauge75(a)verizon.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com ------------------------------ Message: 2 Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Don Goodrich <don.goodrich(a)cheerful.com> Message-ID: <2139978547.224644.1560028246453(a)email.ionos.com> Content-Type: text/plain; charset="utf-8" Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode. > On 08 June 2019 at 12:48 Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG > > > > > Sent: Saturday, June 08, 2019 at 7:12 AM > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com>, "Dennis Wage" <dwage(a)dwage.com> > Subject: Re: [chirp_users] UV-5R and volume. > > True. The setting of the volume control has NOTHING to do with programming. > > If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it. > > > > > > On 08 June 2019 at 06:54 Dennis Wage <dwage(a)dwage.com> wrote: > > > > Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. > > > > Let's once and for all dispel or confirm this. > > > > I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. > > > > Please confirm or deny. > > > > Thanks, > > > > Dennis M. Wage (W9BOQ) > > > > 245 Corum Hill Road > > Castalian Springs, TN 37031 > > (615) 310-4242 Cell > > (615) 562-5128 Home > > http://hammondb3organ.net/ > > http://overdubs.net > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > > > > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich(a)cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net

3 2

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7 Chirp
by Gary Craig 10 Jun '19

10 Jun '19

Jeff, Instead of using the Baofeng software, use Chirp which is the program this list is designed for. Go to: https://chirp.danplanet.com/projects/chirp/wiki/Download and choose the version for the operating system used on your computer. Read thru the info on the Chirp website that will help you use the program and also check out http://www.miklor.com/ which supports Chirp use and has lots of good info. I have used Chirp to program the UV-5R, UV-82C, and UV-82HP. In fact just this weekend programmed 15 of the UV-82C's. Had to do some wiggling of the connector on a couple to get them to communicate. It has to be fully seated and make good contact in the sockets. There is an article and picture on the Miklor site about having to trim a little on some programming cables to get that to happen. Welcome to the list and have fun! 73 Gary Craig KI5CCD Maintenance Webco Distribution Texas 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext.107 Fax 918-246-7045 gcraig(a)webcoindustries.com<mailto:gcraig@webcoindustries.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of jeff riddlebaugh Sent: Sunday, June 9, 2019 2:23 PM To: chirp_users(a)intrepid.danplanet.com Subject: Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7 This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don't know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R. Thanks jeff Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com<mailto:chirp_users-bounces@intrepid.danplanet.com> <chirp_users-bounces(a)intrepid.danplanet.com<mailto:chirp_users-bounces@intrepid.danplanet.com>> on behalf of chirp_users-request(a)intrepid.danplanet.com<mailto:chirp_users-request@intrepid.danplanet.com> <chirp_users-request(a)intrepid.danplanet.com<mailto:chirp_users-request@intrepid.danplanet.com>> Sent: Sunday, June 9, 2019 3:00:03 PM To: chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Subject: chirp_users Digest, Vol 126, Issue 7 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com<mailto:chirp_users-request@intrepid.danplanet.com> You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com<mailto:chirp_users-owner@intrepid.danplanet.com> When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: UV-5R and volume. (JD Morrow) 2. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 3. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 4. Re: UV-5R and volume. (John Kemker) 5. Adding 2m and 70cm repeaters (David) 6. Re: Adding 2m and 70cm repeaters (Jim Unroe) 7. Re: Adding 2m and 70cm repeaters (David) 8. Re: Adding 2m and 70cm repeaters (Amnon Zohar) 9. BF888 Settings tab items not saved (Barry Jackson) 10. Yaesu ft-2dr programming cable (Rodney D. Myers) ---------------------------------------------------------------------- Message: 1 Date: Sat, 8 Jun 2019 16:16:55 -0400 From: "JD Morrow" <ngauge75(a)verizon.net<mailto:ngauge75@verizon.net>> Subject: Re: [chirp_users] UV-5R and volume. To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>> Message-ID: <62FFB68360F84463A8D8FFCE40A3C5D4@Laptop15> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original All, Have been programming multiple (15+/-) UV-5's, for our group, for several years. Never have had to mess with the volume. Versions of hardware at the beginning was the worst. Cables and drivers, were a pain for a while to, but not the radio controls. 73's JD k2txv -----Original Message----- From: Jim Unroe Sent: Saturday, June 8, 2019 1:22 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV-5R and volume. On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich(a)cheerful.com<mailto:don.goodrich@cheerful.com>> wrote: > > Certainly the computer volume control has no influence but since the data > is being communicated to/from the radio over the external radio audio > port, the radio volume control needs to be set midrange for the cable to > "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com<mailto:don.goodrich@Cheerful.com> > AF7DG The digital data is proviced on connections that have nothing to do with the connections for the analog speaker audio or the analog microphone audio. In addition to the audio wires (that aren't included in the programming cable since they are not necessary to have for programming) and the data wires, there is even a connection that provides DC voltage (5V or 3.3V depending on the radio) to power external devices. http://www.miklor.com/COM/UV_Technical.php#spkrmic Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at ngauge75(a)verizon.net<mailto:ngauge75@verizon.net> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> ------------------------------ Message: 2 Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net<mailto:nigel@ngunn.net>> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>>, Don Goodrich <don.goodrich(a)cheerful.com<mailto:don.goodrich@cheerful.com>> Message-ID: <2139978547.224644.1560028246453(a)email.ionos.com<mailto:2139978547.224644.1560028246453@email.ionos.com>> Content-Type: text/plain; charset="utf-8" Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode. > On 08 June 2019 at 12:48 Don Goodrich <don.goodrich(a)cheerful.com<mailto:don.goodrich@cheerful.com>> wrote: > > Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com<mailto:don.goodrich@Cheerful.com> > AF7DG > > > > > Sent: Saturday, June 08, 2019 at 7:12 AM > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net<mailto:nigel@ngunn.net>> > To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>>, "Dennis Wage" <dwage(a)dwage.com<mailto:dwage@dwage.com>> > Subject: Re: [chirp_users] UV-5R and volume. > > True. The setting of the volume control has NOTHING to do with programming. > > If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it. > > > > > > On 08 June 2019 at 06:54 Dennis Wage <dwage(a)dwage.com<mailto:dwage@dwage.com>> wrote: > > > > Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. > > > > Let's once and for all dispel or confirm this. > > > > I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. > > > > Please confirm or deny. > > > > Thanks, > > > > Dennis M. Wage (W9BOQ) > > > > 245 Corum Hill Road > > Castalian Springs, TN 37031 > > (615) 310-4242 Cell > > (615) 562-5128 Home > > http://hammondb3organ.net/ > > http://overdubs.net > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net<mailto:nigel@ngunn.net> > > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > > > > > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net<mailto:nigel@ngunn.net> www http://www.ngunn.net > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich(a)cheerful.com<mailto:don.goodrich@cheerful.com> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net<mailto:nigel@ngunn.net> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net<mailto:nigel@ngunn.net> www http://www.ngunn.net

1 0

[chirp_users] Yaesu ft-2dr programming cable
by Rodney D. Myers 09 Jun '19

09 Jun '19

Just bought a Yaesu ft-2dr. I thought I purchased a programming cable. I grabbed a cloning cable instead. Which cable is the correct to use? Main programming computer is a debian (linux) laptop. Thanks -- Rodney D. Myers <RodneyMyers60(a)yahoo.com> - kg6anx They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Ben Franklin - 1759

1 0

[chirp_users] BF888 Settings tab items not saved
by Barry Jackson 09 Jun '19

09 Jun '19

Hi, Has anyone had an issue with Baofeng 888 items on the settings tab (not memories) not being saved on upload? I am primarily trying to disable voice prompts, however after editing the downloaded image and uploading it, the next time I download it, the setting has reverted (or was never saved). Editing the hex in the browser produces the same result. Does anyone know the significance of the red highlighted values? Chirp version is CHIRP daily-20190412 and I see nothing in the change log since then related to the BF888. One thing I notice is that the progress bar on upload moves very quickly after about half way, whereas the download is at a steady rate, which makes me wonder if it skips part of the upload. Cable is a marked up as Baofeng and is regularly used with the UV5R without problems. OS is Mageia Linux using our official package which is maintained by me. Any ideas welcome. Cheers, Barry

1 0

[chirp_users] Adding 2m and 70cm repeaters
by David 09 Jun '19

09 Jun '19

Hi everyone, You guys were incredibly helpful recently in getting me started. I've now successfully uploaded marine VHF, 2m and 70cm simplex channels to my Baofeng UV-5R III, thanks again. I'm now having a few problems in adding repeaters and I hope you can similarly help. I have a CHIRP file for relevant UK repeaters. I'm guessing that they are from an older version of CHIRP as some of the column headings are different. I'm manually entering the info. All ok except these. The (old) file of repeaters shows these columns: Tone. rToneFreq. cToneFreq. DtcsCode. DtcsPolarity. Tstep I'm trying to enter:- Tone, always Tone rToneFreq, either 110.9, 82.5 or 103.5. cToneFreq, always 88.5 DtcsCode, always 23 DtcsPolarity, always NN My version of CHIRP isn't quite the same. Here are my issues. In CHIRP, I populate Tone Mode to Tone. My next 2 columns are Tone and Tone Sql. I seem only able to enter one of these columns as when I enter the second it automatically changes the previous Tone Mode to another preset. Simialrly, the Tone Mode autochanges when I try to populate any of the DTCS Code, DTC Rx Code and Cross Mode. Hopefully, I've explained the issue clearly. Any ideas what I'm doing wrong. Thanks in advance Kind regards David G4PYH

3 3

[chirp_users] UV-5R and volume.
by Dennis Wage 08 Jun '19

08 Jun '19

Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. Let's once and for all dispel or confirm this. I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. Please confirm or deny. Thanks, Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net

7 8

Re: [chirp_users] UV-5R and volume.
by Tom Consodine, ND5Y 08 Jun '19

08 Jun '19

What directions? Tom ND5Y > Then why is doing that explicitly stated in the directions? >

3 2

[chirp_users] baofeng uv5r
by Don Morgan 08 Jun '19

08 Jun '19

I have 2 of these radios and can't seem to get a good rec signal on them. I get the local sheriff dispatch but do not get the patrol car return. When the bad weather was coming in I tuned to 162.55 which is the weather service for my area. I got a very noisy signal and got in car and drove around to see if it changed. It did come in better in several places but no way acceptable in an emergency. Is their a better antenna available for these? Any other suggestions would be appreciated. DON

6 5

[chirp_users] Second Attempt cant program my radio
by gearjam＠ken-tennwireless.com 08 Jun '19

08 Jun '19

I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime

9 8

Re: [chirp_users] Second Attempt cant program my radio Uv82S35
by Gary Craig 07 Jun '19

07 Jun '19

Steve Prime, Uv82S35 is a different program than Chirp. It is the Baofeng software, available on Btech and other sites. Go to https://chirp.danplanet.com/projects/chirp/wiki/Download and download the version of Chirp that works with your operating system. Gary Craig KI5CCD Maintenance Webco Distribution Texas 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext.107 Fax 918-246-7045 gcraig(a)webcoindustries.com<mailto:gcraig@webcoindustries.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of D.J.J. Ring, Jr. Sent: Friday, June 7, 2019 7:42 AM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] Second Attempt cant program my radio This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious What radio do you have? Is it supported? What Operating System are you using? What USB port have you selected? 73 David N1EA On Wed, Jun 5, 2019, 20:53 <gearjam(a)ken-tennwireless.com<mailto:gearjam@ken-tennwireless.com>> wrote: I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea(a)arrl.net<mailto:n1ea@arrl.net> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com>

1 0

[chirp_users] Help for newb continued”Checksum
by Karen Chancellor 06 Jun '19

06 Jun '19

I got rid of chirp pkg from Ubuntu and installed daily via ppa as per instructions. I get “Checksum Failed [0000-1FB9 (@1FBA)]” Same every time. I am using cable from Mirkit. Help appreciated.

1 0

[chirp_users] Help for newb, Linux, Yaesu vx-5r
by Karen Chancellor 06 Jun '19

06 Jun '19

I couldn’t get chirp to work on Mac and am now trying to with Linux. I am using the latest version on Ubuntu 18.04-1. When I attempt download from Yaesu vx-5r, the progress bar indicates downloading, but at the end I get “Failed to communicate with the radio: Recieved incomplete image from radio”. There is also a CLONE ERROR on the radio. Your assistance will be much appreciated. If there is output you would like to see, please let me know. Thank you.

1 0

Re: [chirp_users] Second Attempt cant program my radio
by JOCK SOUTAR 05 Jun '19

05 Jun '19

I use cables from rt systems. Never had one not work. On your cable bake sure it is seating all the way in . I have seen this problem on a friend's trying to help him get his Baeofeng UV - 5 R programed. Luckily I had my cable out in my vehicle in his driveway. Rather than getting stressed we used my cable and it worked first time we tried. On Wednesday, June 5, 2019 gearjam <chirp_users(a)intrepid.danplanet.com> wrote: I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 2

[chirp_users] Elementary help for novice requested!
by David 05 Jun '19

05 Jun '19

I've just bought a Baofeng UV-5R III and I'd like to use it for marine vhf and 2m and 70cm amateur bands. I've held a ham license since the 1980s but have been inactive for many years. I've succeeded with "Download from radio". I've also opened a new page to "Import from stock config" to open FR marine vhf. I can't seem to be able to "File; save" or "File; save as"? When I'm on the marine vhf page, I can not "upload to radio" The text is greyed out? All help gratefully received! Many thanks David, G4PYH Cheshire, UK

7 11

[chirp_users] no daily for Uubutu 19.04 Disco Dingo
by WILLIAM PALMER 01 Jun '19

01 Jun '19

Hello, I can not find the daily update for Ubuntu 19.04 "Disco Dingo" any where, and PPA returns error message that there is no release for this version. Help Please, Billy

2 1

[chirp_users] Ok
by dean duncan 01 Jun '19

01 Jun '19

Sent from my iPad

1 0

[chirp_users] New Daily Build
by Build System 01 Jun '19

01 Jun '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190601 A list of the changes included in this build (since the last daily) follows: Changes for Build #582 [Jim Unroe <rock.unroe(a)gmail.com>] [GMRS-50X1] Fix TX Power Level Setting Issue This patch updates the "memory" structure to support 3 TX power levels. #6821

1 0

Re: [chirp_users] chirp_users Digest, Vol 125, Issue 22
by Gary Schelske 31 May '19

31 May '19

Are the frequency’s your down loading activated in the 5R ? Make sure it is opened up to allow the frequency’s your installing. Check coverage activation..

1 0

Re: [chirp_users] Elementary help for novice requested! youtube video
by Gary Craig 31 May '19

31 May '19

David, I checked out the video and there are a couple of caveats. First when he gets to the part where he is using Chirp the sound level drops drastically. Hope you have some amplified speakers... He is also running on a Mac not Windows. You will see when he goes to choose the connection for the radio it shows a usb device. That doesn't happen on the Windows version of Chirp. You only see the choices for Comm ports. Since you were able to download from the radio you had to have gotten that right. Device Manager will show you it you ever have problems. There may be others but i quit watching after that point because of the poor audio. There may be other videos out there. From my past experiences, you need to make sure you have a fairly new version of Chirp. I could never cut, copy, or paste in the memory areas on my Win 7 laptop until they upgraded the windows install months back. Then finally i could start using it. You will have to play around with it to get the hang of it. Once you get that first one under your belt you will look forward to working with it. Have fun and 73. Be blessed! May 2019 be our year of change & growth! Gary Craig KI5CCD Maintenance Webco Industries Texas Distribution 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext. 107 Fax 918-246-7045 gcraig(a)webcotube.com<mailto:gcraig@webcotube.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of David Sent: Friday, May 31, 2019 10:40 AM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] Elementary help for novice requested! This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious Jim and Tom, Thank you for your helpful, informative and welcoming responses. I’m pretty sure that I understand everything you’ve written. I’m using an HP laptop running W7. I have a second HP laptop running W10 but I prefer the other machine. I’ve already tried to copy and paste the marine vhf stock configuration but I highlighted all rows, select all, copy, paste into a file, new. It didn’t work but I’ll try again one row at a time. I’m still having issues with file/save and file/save as. As I click on either action, the screen simply reverts to the open page. Sounds pretty simple but I haven’t yet found a way to save/change name as save! Hopefully. The YouTube video will help. I’m now away from home for the weekend but based upon your feedback I’ll be enthusiastically trying again on Monday! Kind regards David Sent from my iPhone On 31 May 2019, at 12:48, Tom Henderson <Tom(a)henderson4.us<mailto:Tom@henderson4.us>> wrote: Look at the tab for the file you have open that you're trying to write to the radio. If it says something like "Generic CSV" a the beginning, you can't write that to a radio. The problem is that you're opening a new file, or at least that's what you said you were doing in your original email. The only files you can write to a radio are files that were created by reading from a radio. The name on the tab should be the model of the radio you pulled it from. Save an unmodified version, then import the stock config into the file you got from the radio, save it again with a new name, then write it to the radio. If "Upload to radio" is blank, it's most likely the tab you have open didn't come from a radio. Check out this youtube video - https://www.youtube.com/watch?v=0l_kdktZAkI At 4:40, he has just pulled the config from the radio. At 7:00, he starts importing VHF channels At 11:00, he uploads the file he just finished downloading and modifying back to the radio. Tom Henderson On 5/31/19 6:08 AM, David wrote: Thanks for the response, Tom, much appreciated. Your description is pretty much what I’m trying, unsuccessfully, to achieve. I don’t seem able to either “file, save” or “file, save as”. Clicking on either doesn’t appear to work. When I’m on the page with “stock configuration” the “send to radio” option is greyed out. I’ve tried a few times but always the same result. My next step is probably to download the chirp software and try again. Otherwise, I’m stuck! Regards David Sent from my iPhone On 31 May 2019, at 11:52, Tom Henderson <Tom(a)henderson4.us<mailto:Tom@henderson4.us>> wrote: Sounds like you're missing a step. Once you've downloaded successfully from the radio, save that file and keep it in case you ever want to go back to the settings it came out of the box with. Next, with that file still open, select "radio" from the top menu, "Import from stock config," and then select the UHF channels you need. Now save the modofied file under a new name, and with that file still open, try writingback to the radio. Hope that helps! KW4TOM Tom Henderson On 5/31/19 2:16 AM, David wrote: I've just bought a Baofeng UV-5R III and I'd like to use it for marine vhf and 2m and 70cm amateur bands. I've held a ham license since the 1980s but have been inactive for many years. I've succeeded with "Download from radio". I've also opened a new page to "Import from stock config" to open FR marine vhf. I can't seem to be able to "File; save" or "File; save as"? When I'm on the marine vhf page, I can not "upload to radio" The text is greyed out? All help gratefully received! Many thanks David, G4PYH Cheshire, UK _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom(a)henderson4.us<mailto:tom@henderson4.us> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to davidp.jackson(a)hotmail.co.uk<mailto:davidp.jackson@hotmail.co.uk> at davidp.jackson(a)hotmail.co.uk<mailto:davidp.jackson@hotmail.co.uk> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom(a)henderson4.us<mailto:tom@henderson4.us> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to davidp.jackson(a)hotmail.co.uk<mailto:davidp.jackson@hotmail.co.uk> at davidp.jackson(a)hotmail.co.uk<mailto:davidp.jackson@hotmail.co.uk> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com>

1 0

[chirp_users] First time user (help)
by Graham S 29 May '19

29 May '19

Hello chirp folk My first time using chirpw - not yet totally working yet. The mission was to program a Baofeg Radio ---------------------------------------------------------- Platform is Linux (Mint - Ubuntu based) chirpw does install OK in /usr/bin It also runs from $HOME/bin if I put a copy there. I check with "lsusb" to see that the USB device is seen OK, and all is well. 1. Firstly, I get a permissions refusal on attempting the communication. "An error has occurred [Errno 13] could not open port /dev/ttyS0" 2. If I run chirpw from a terminal, I get message: (process:5560): Gtk-WARNING **: 10:09:24.416: Locale not supported by C library. Using the fallback 'C' locale. Gtk-Message: 10:09:24.418: Failed to load module "atk-bridge" I check to see libatk-bridge2.0-0 is present - and all is well Also libatk-bridge2.0-dev is there I do not understand why the module is not loaded. The messages seem to come from a process that is named like a LAN network address which keeps changing except for the first number "10". It might some GTK process -------------------------------------------------------------- Have I done something catastrophic? Maybe missed out something essential? Thanks if you can help My regards all

2 2

Re: [chirp_users] Truth or Fiction Kenwood radios
by Gary Craig 28 May '19

28 May '19

Pavel, Thanks for the info on the Kenwood TK series. I was given a TK-762HG and saw it was supported in Chirp. Looking forward to programming it. Is the hack for the 12 channels included in the driver? Mine has 8. Be blessed! May 2019 be our year of change & growth! Gary Craig KI5CCD Maintenance Webco Industries Texas Distribution 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext. 107 Fax 918-246-7045 gcraig(a)webcotube.com -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Pavel Milanes Costa Sent: Tuesday, May 28, 2019 8:36 AM To: chirp_users(a)intrepid.danplanet.com Subject: Re: [chirp_users] Truth or Fiction This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious El 24/5/19 a las 18:27, John Kemker escribió: > I find it hard to believe that they don't have as good a software > standard as less-expensive brands. I was not eager to take a side here, but... I'm developing a driver (CHIRP) for an old Yaesu/Vertex Radio family right now (FTL 1011/2011/7011) and there a BUG in the firmware, they DON'T Validate the radio info once I pass to the program space... I can program a 2011 like if a 7011 and vice versa... there is an old hack to convert any of them from 4 to 8 to 12 channels on SOFTWARE, etc.. "less-expensive brands?" I developed the driver for Commercial Grade Kenwood TK-x60/x70 & TK-x60G/x70G families (for CHIRP) and there is a lack of validation out there in the same aspect... In fact for YEARS fleet/ham operators knows that ANY of the in that familly can be programed like a x78 and you will get features that ONLY that radio has... yes I can program a TK-760G and get all the features of a TK-768G (A key for low power, true reverse, etc...) and the radios are happy with that... [The OEM software HIDE the key features for particular radios but the functions are there, I have given ACCESS to that functions in CHIRP, once you know that all of them uses the same firmware, literally: the same firmware...] The TK-790 is another monster [never completed the driver for it...], better programmed, locks on the important things, a separate mode for firmware, but has a quirk or two also... As many of the previous OM said: Fast, Reliable, Cheap; pick just two of them. Cheers, Pavel CO7WT. _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Gary at gcraig(a)webcotube.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

Re: [chirp_users] Truth or Fiction
by JOCK SOUTAR 28 May '19

28 May '19

Never bricked any of mine. Could it be the operator rather than the radio? On Tuesday, May 21, 2019 Dennis Wage <chirp_users(a)intrepid.danplanet.com> wrote: Chirp has bricked Yeasu radios? I know what I think. What's the real truth? Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

15 26

[chirp_users] Truth or Fiction
by Dennis Wage 28 May '19

28 May '19

Chirp has bricked Yeasu radios? I know what I think. What's the real truth? Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net

5 5

Re: [chirp_users] Truth or Fiction
by Dave B 26 May '19

26 May '19

On 25/05/2019 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: <Snipped> > They say they've seen bricked radios caused by CHIRP.? Said it's > because CHIRP wrote to areas they're not supposed to write to.? Said > that RT Systems "works with Yaesu" and that's why they support RT > Systems.? *Who would write the internal software for a radio where the > programming software could brick it?* ------------------------------------------------------------------------ Hi. Probably so they can load/update the entire firmware via the programming port during production with minimal effort on their part. However... Any "Sensible" designer would have put procedures in place in the final "User Release" firmware (as opposed to Production Test firmware) so that someone has to put the radio in a firmware load mode, perhaps like some other gadgets, by holding particular keys while it is powered up. Otherwise, leave it able to have memory data pulled and pushed, but other areas protected, perhaps flagging a warning on any display, of beeping, if anything tries to push data where it's not supposed to go, but otherwise ignoring it. But, these are products built down to a price, software/firmware development is expensive in time, and time costs money, due to the team of people involved. Plus, they are probably working on a host of other products too, so rightly or wrongly, only the bare minimum is done to meet the project's specified needs, and that's all. At the expense of "sanitisation" code for any remote memory read/write functions over any I/O port. Remember, just one bit flipped in the wrong place could cause mayhem or utterly brick a product. Or cause no issue, if the internal code does not use that location. But, a later updated firmware might use that location for something critical! The RT systems people have probably paid Yaesu for the needed information to do it the right way, or even purchased a software library from them, so they are understandably trying to protect their investment, in this case by (allegedly) perhaps spreading untruths about competing software. It's sadly not uncommon in the professional/industrial world too. Regarding CHIRP. It's good, very good. But by the nature of things that are built as a result of reverse engineering someone else's protocol without sight of any makers documentation, mistakes can be made, or features/methods that are default if not touched are fine on one product, but on another outwardly similar product, is the wrong way to do things. Heck, in my life where I've created code for products and customers, where documentation DOES exist, there are often errors and omission in the doc's that turn out to be a tripping point! And that's for products that cost many times more than any Ikensu radio! Reverse engineering is not trivial either, lots of testing is needed, with access to examples of (in this case) the particular make/model of radio in question, and known working software (all at a cost.) All that takes time, LOTS of time, plus at a guess, I expect the developers working on this are volunteers who as such are unpaid and have lives to get on with too. I have to say, they do a great job all things considered. I myself have a HH radio I'd like to use with CHIRP (A Puxing PX-2R) that CHIRP doesn't understand correctly, at this time. A Bug has been filed, with log files etc (January this year.) But I'm not expecting a rapid fix as other issues affect a lot more people. I have the hardware, some Python knowledge, but I'm not up at the level needed to do much with it, sadly. I also don't get enough of "the right sort of contiguous time" to dive in, learn, and have a go myself, but I might re-visit the code, and see if I can learn what's going on, or not. But as always, that takes time, and I have many many other things I need to be doing in the domestic and work world too. Regards to All. Dave B G0WBX -- Created on and sent from a Unix like PC running and using free and open source software:

1 0

Re: [chirp_users] Homebrew formula and daily builds
by Dave B 24 May '19

24 May '19

Date: Thu, 23 May 2019 14:26:58 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> Subject: Re: [chirp_users] Homebrew formula and daily builds To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Brian McCaffrey <brian(a)w1bp.net> Message-ID: <693315801.787648.1558636018565(a)email.ionos.com> Content-Type: text/plain; charset=UTF-8 For those Linux users who feel neglected, you can install Homebrew with: sh -c "$(curl -fsSL https://raw.githubusercontent.com/Linuxbrew/install/master/install.sh)" ------------------------------------------------------------------------ No thank you! I've seen what that can do, and anyway, that fails miserably if Ruby is not installed. #!/bin/sh set -e umask 022 if test -n "$HOMEBREW_FORCE_VENDOR_RUBY" || ! command -v ruby >/dev/null; then eval "`curl -fsSL https://raw.githubusercontent.com/Linuxbrew/install/master/install-ruby`" fi exec ruby -e "`curl -fsSL https://raw.githubusercontent.com/Linuxbrew/install/master/install`" "$@" (I've removed what it put there, cleaned and sterilised the brewery!) Mac's are an odd case, as they are curated by Apple, who vehemently do not want anyone "polluting" the system with unknown software. However, as we all know, there are ways... Best stick to the instructions on the chirp website I think. 73. Dave G0WBX. -- Created on and sent from a Unix like PC running and using free and open source software. ::

1 0

[chirp_users] New Daily Build
by Build System 24 May '19

24 May '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190524 A list of the changes included in this build (since the last daily) follows: Changes for Build #581 [Ray Cielencki <rayslinky(a)gmail.com>] [VX-6] Add settings support for Yaesu VX-6 #1289

1 0

[chirp_users] Homebrew formula and daily builds
by Brian McCaffrey 23 May '19

23 May '19

I installed Chirp on macOS using Homebrew, but it seems to have installed the daily build from 20190206. What would be the best way to install the daily build using Homebrew? Should I re-write the formula to get the daily build? Suggestions? 73, Brian

4 7

[chirp_users] CHIRP and HP Chromebook
by O O 22 May '19

22 May '19

Hello, I purchased a Baofeng BF-F8HP, cable, and HP Chromebook. I have no experience with either program. The software CHIRP lists doesnt download on the laptop. The laptop has Linux capability, but I don't have any idea how to execute the program. Any assistance would be appreciated. Thanks. Jim

4 3

[chirp_users] PPA and auto CHIRP update/upgrade 'issue'
by Mike Parks 19 May '19

19 May '19

Hi, I'm having a problem with the automatic update of CHIRP since I upgraded Ubuntu from 16.xx to 19.04 64 bit. I get various error messages when entering the three lines of instruction on the dansmith site. I then see: Unable to download updates: failed to refresh cache E:The repository 'http://ppa.launchpad.net/dansmith/ chirp-snapshots/ubuntu <http://ppa.launchpad.net/dansmith/chirp-snapshots/ubuntu?fbclid=IwAR1bQXquR…> disco Release' does not have a release file. Everything worked fine until the upgrade to 19.04. So now I have to manually update CHIRP. Any thoughts for a Linux/Ubuntu novice? Thanks. Mike - G4UPD

3 2

Re: [chirp_users] UV-82HP display question
by Tom Balaban 18 May '19

18 May '19

Hi Dan, See if this helps. Press the Menu button then press the down arrow or the up arrow until you get the item 21 - MDF-A Channel Display, Hit menu again the the up or down arrow until you see Channel Name then press Menu again then Exit. Do the same thing for item 22 - MDF-B Channel Display only this time select Frequency. Now if you have both A & B set to the same channel the A display will show the name and the B display the frequency. Good luck, Tom ------ Original Message ------ From: "Dan Jolley" <danjolley(a)hotmail.com> To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Sent: 5/17/2019 3:24:20 PM Subject: Re: [chirp_users] UV-82HP display question >No problem Tom. I watched a guy do something like that on the keypad on >a YouTube video, but it wasn't the display I had in mind. Plus he >didn't explain a lot, especially which keys he pressed on the keyboard. > >Dan > >This Hotmail is a pain!!!! It's nothing like Yahoo! >-------------------------------------------------------------------------------- >From:chirp_users-bounces@intrepid.danplanet.com ><chirp_users-bounces(a)intrepid.danplanet.com> on behalf of Tom Balaban ><mototom800(a)gmail.com> >Sent: Friday, May 17, 2019 2:13 PM >To: Discussion of CHIRP >Subject: Re: [chirp_users] UV-82HP display question > >Hi Dan, > >I may have mildly misspoke. I know it can be done manually but I think >it would be very difficult, if not impossible to get CHIRP to do it. >Sorry for any confusion. > >Tom > >------ Original Message ------ >From: "Dan Jolley" <danjolley(a)hotmail.com> >To: "chirp_users(a)intrepid.danplanet.com" ><chirp_users(a)intrepid.danplanet.com> >Sent: 5/17/2019 3:01:42 PM >Subject: Re: [chirp_users] UV-82HP display question > >>Thanks Charles & Tom, I have tried so many combinations in Chirp and >>I've also watched some YouTube videos, none of them have shown that >>capability. I couldn't get it to do it in Chirp either. >> >>It sure would be nice to have that feature! Anyway, if I knew someone >>that knew how to do that it would be ya'll! >> >>Thanks again, >>Dan Jolley >>-------------------------------------------------------------------------------- >>From: Dan Jolley >>Sent: Friday, May 17, 2019 1:13 PM >>To:chirp_users@intrepid.danplanet.com >>Subject: UV-82HP display question >> >>I have a UV-82HP, and I would like the top line to say the channel >>name, and on the bottom line I would like it to show the correct >>frequency of the channel I am on. Example: If I am on NOAA on the top >>line I would like it to show 162.525 on the bottom line. Which is the >>NOAA frequency in our area. >> >>I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same >>thing to (if possible). >> >>Is this possible? I have done so many google searches and read a bunch >>of articles. One man said he had his radio this way, but did not say >>how he did it. >> >>I have been playing around with the Settings in Chirp and I have the >>Name on the top line, but can't get the correct frequency on the >>bottom line. >> >>Thank you in advance, >>Dan Jolley

7 9

[chirp_users] Programming New BTECH GMRS-50X1
by David C. Jenner 18 May '19

18 May '19

I successfully programmed a new BTECH GMRS-50X1 using my older BTECH GMRS-V1 as a basis. However, it took 4 min and 30 sec to upload to the radio. The first thing I did was read out the 50X1 and write back to it. That upload and all since, with new entries, have taken about the same time, which seems excessively long? I don't see this with other radios. Latest version of CHIRP on Windows 10 running on Parallels on a MacBook Pro using both BTECH and RT Systems cables. Comm port says it's 9600 baud. Dave

4 7

Re: [chirp_users] UV-82HP display question
by Tom Balaban 17 May '19

17 May '19

Hi Dan, I may have mildly misspoke. I know it can be done manually but I think it would be very difficult, if not impossible to get CHIRP to do it. Sorry for any confusion. Tom ------ Original Message ------ From: "Dan Jolley" <danjolley(a)hotmail.com> To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Sent: 5/17/2019 3:01:42 PM Subject: Re: [chirp_users] UV-82HP display question >Thanks Charles & Tom, I have tried so many combinations in Chirp and >I've also watched some YouTube videos, none of them have shown that >capability. I couldn't get it to do it in Chirp either. > >It sure would be nice to have that feature! Anyway, if I knew someone >that knew how to do that it would be ya'll! > >Thanks again, >Dan Jolley >-------------------------------------------------------------------------------- >From: Dan Jolley >Sent: Friday, May 17, 2019 1:13 PM >To:chirp_users@intrepid.danplanet.com >Subject: UV-82HP display question > >I have a UV-82HP, and I would like the top line to say the channel >name, and on the bottom line I would like it to show the correct >frequency of the channel I am on. Example: If I am on NOAA on the top >line I would like it to show 162.525 on the bottom line. Which is the >NOAA frequency in our area. > >I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same >thing to (if possible). > >Is this possible? I have done so many google searches and read a bunch >of articles. One man said he had his radio this way, but did not say >how he did it. > >I have been playing around with the Settings in Chirp and I have the >Name on the top line, but can't get the correct frequency on the bottom >line. > >Thank you in advance, >Dan Jolley

2 2

[chirp_users] UV-82HP display question
by Dan Jolley 17 May '19

17 May '19

I have a UV-82HP, and I would like the top line to say the channel name, and on the bottom line I would like it to show the correct frequency of the channel I am on. Example: If I am on NOAA on the top line I would like it to show 162.525 on the bottom line. Which is the NOAA frequency in our area. I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same thing to (if possible). Is this possible? I have done so many google searches and read a bunch of articles. One man said he had his radio this way, but did not say how he did it. I have been playing around with the Settings in Chirp and I have the Name on the top line, but can't get the correct frequency on the bottom line. Thank you in advance, Dan Jolley

2 2

Re: [chirp_users] UV-82HP display question
by Tom Balaban 17 May '19

17 May '19

I know that can be done by setting the display mode as you would prefer in the "A" and the "B" displays. However you must set both displays to the same channel manually. I'm not aware of an automatic sync capability. Tom ------ Original Message ------ From: "Dan Jolley" <danjolley(a)hotmail.com> To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Sent: 5/17/2019 2:13:20 PM Subject: [chirp_users] UV-82HP display question >I have a UV-82HP, and I would like the top line to say the channel >name, and on the bottom line I would like it to show the correct >frequency of the channel I am on. Example: If I am on NOAA on the top >line I would like it to show 162.525 on the bottom line. Which is the >NOAA frequency in our area. > >I also have a UV-82C, UV-5R and a UV-5RTP I would like to do the same >thing to (if possible). > >Is this possible? I have done so many google searches and read a bunch >of articles. One man said he had his radio this way, but did not say >how he did it. > >I have been playing around with the Settings in Chirp and I have the >Name on the top line, but can't get the correct frequency on the bottom >line. > >Thank you in advance, >Dan Jolley

1 0

[chirp_users] Alinco DJ-G7T FW 5.1000
by Phil Freeman 17 May '19

17 May '19

Howdy List! just got my new Alinco DJ-G7T today. I'm guessing that it's not the same as the DJ-G7EG. Its firmware version is 5.1. I tried both the debian buster packaged version and the following version from the default branch in Mercurial: > changeset: 3229:7f46b0213c16 > tag: tip > user: Pavel Milanes (CO7WT) <pavelmc(a)gmail.com> > date: Sun May 12 00:35:53 2019 -0400 > summary: [KG-UV8E] Fix the missing step declarations, fixes #6785 Attached is a log from the last attempt. $ ./chirpw --log-level debug --log /tmp/chirpw-$(date +%s)-alinco-DJ-G7.log (both versions worked fine with my Yaesu FT-70D...) -- ⛵ - 🏴☠️

1 3

[chirp_users] danjolley@hotmail.com
by Dan Jolley 17 May '19

17 May '19

1 1

[chirp_users] Programming Yaesu Radios using CHIRP
by Larry Lovell 16 May '19

16 May '19

Has anyone had a problem programming a Yaesu radio with CHIRP? Someone mentioned that their Yaesu was damaged and had to be sent to the factory because CHIRP had overwritten some code controlling the processor. It also had to be re-flashed. Since I don't fully understand how CHIRP works this doesn't make sense to me, but knowing manufacturing companies, they may share Channel Memory with processor memory and not think much about it. Thanks for your information. -- Larry Lovell 73's N7RGW http://QRVTronics.com <http://qrvtronics.com> Cell: 214-697-1729

10 14

[chirp_users] New Daily Build
by Build System 16 May '19

16 May '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190516 A list of the changes included in this build (since the last daily) follows: Changes for Build #580 [Pavel Milanes (CO7WT) <pavelmc(a)gmail.com>] [KG-UV8E] Fix the missing step declarations, fixes #6785 STEP var was declared but not used, now it's passed via rf.valid_tuning_steps

1 0

[chirp_users] Baofeng-uv82
by Billy Shirer 15 May '19

15 May '19

I downloaded Chirp for my baofeng-uv82 and I can't get it Programmed

16 52

[chirp_users] Baofeng UV-82HP and iMac
by ALAN BARKER 15 May '19

15 May '19

Sorry to be so dense but I need some help. I used to be able to have some fun with chirp but I've not been able to interact with my radios (baofeng UV-5RE Plus and UV-82HP) since getting a new computer. On an older computer and with an older cable I could access my UV-5RE fine but now I can’t get it to recognize anything. So, I’ve got the latest build of chirp (20190511) I’m running on an iMac with OS 10.14.4 Mojave When start up Chirp and try to download from radio (with the cable (newly purchased as I thought that might be the problem), turn the radio on max volume and hit the “OK” button, I immediately get an error message that reads: “An error has occurred could not open port /dev/cu.Bluetooth-PDA-Sync: [Errno 2] No such file or directory: '/dev/cu.Bluetooth-PDA-Sync’” Where am I going wrong? Alan KB1IJB

4 6

Re: [chirp_users] chirp_users Digest, Vol 125, Issue 9
by Jerome Mueller 15 May '19

15 May '19

We really need to save this thread someplace as a computer support experience. We couldn't make up a better example of how not to request help and how not to respond to a request. General questions with no information and specific suggestions assuming a problem but based upon no information. Jerry On 5/15/19 3:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > 1. Baofeng-uv82 (Billy Shirer) > 2. Re: Baofeng-uv82 (Glenn At Home) > 3. Re: Baofeng-uv82 (Amnon Zohar) > 4. Re: Baofeng-uv82 (Nigel A. Gunn G8IFF/W8IFF) > 5. Re: Baofeng-uv82 (Billy Shirer) > 6. Re: Baofeng-uv82 (Glenn At Home) > 7. Re: Baofeng-uv82 (Billy Shirer) > 8. Re: Baofeng-uv82 (Steve Thomas) > 9. Re: Baofeng-uv82 (al(a)aljones.us) > 10. Re: Baofeng-uv82 (Billy Shirer) > 11. Re: Baofeng-uv82 (Jardy) > 12. Re: Baofeng-uv82 (Dan Jolley) > 13. Re: Baofeng-uv82 (Billy Shirer) > 14. Re: Baofeng-uv82 (Dan Jolley) > 15. Re: Baofeng-uv82 (Billy Shirer) > 16. Re: Baofeng-uv82 (Glenn At Home) > 17. Re: Baofeng-uv82 (Dan Jolley) > 18. Re: Baofeng-uv82 (Billy Shirer) > 19. Re: Baofeng-uv82 (Billy Shirer) > 20. Re: Baofeng-uv82 (Dan Jolley) > 21. Re: Baofeng-uv82 (Dan Jolley) > 22. Re: Baofeng-uv82 (Jardy) > 23. Re: Baofeng-uv82 (Glenn At Home) > 24. Re: Baofeng-uv82 (Billy Shirer) > 25. Re: Baofeng-uv82 (Billy Shirer) > 26. Re: Baofeng-uv82 (Glenn At Home) > 27. Re: Baofeng-uv82 (Nigel A. Gunn G8IFF/W8IFF) > 28. Re: Baofeng-uv82 (Chuck Hast) > 29. Re: Baofeng-uv82 (Jardy) > 30. Re: Baofeng-uv82 (Billy Shirer) > 31. Re: Baofeng-uv82 (Billy Shirer) > 32. Re: Baofeng-uv82 (Billy Shirer) > 33. Re: Baofeng-uv82 (Dan Jolley) > 34. Re: Baofeng-uv82 (Billy Shirer) > 35. Re: Baofeng-uv82 (Dan Jolley) > 36. Re: Baofeng-uv82 (Scott Raines) > 37. Re: Baofeng-uv82 (Jardy) > 38. Re: Baofeng-uv82 (Reza Rahgozar) > 39. Re: Baofeng-uv82 (D.J.J. Ring, Jr.) > 40. Re: Baofeng-uv82 (Ernesto Xload) > 41. Re: Baofeng-uv82 (Dennis Wage) > 42. Re: Baofeng-uv82 (Michael E. Jaggers) > > >

1 0

Re: [chirp_users] Baofeng-uv82
by Michael E. Jaggers 15 May '19

15 May '19

1 0

[chirp_users] Help wanted for the support of the KG-UV8T...
by Pavel Milanes Costa 11 May '19

11 May '19

Call for users of the Wuoxun KG-UV8T to test compatibility with the new KG-UV8E driver. If you are a user of the Wuoxun KG-UV8T your help is needed to fully support this radio with the Wuoxun KG-UV8E model. All evidence points that the 8E & 8T are clones, but logs and images are needed to test that. We need you to try to download the information from a Wuoxun KG-UV8T using the settings of the Wuoxun KG-UV8E in Chirp, if you success we need the debug.log and the image saved of your radio. Here you can find how to get the debug.log: https://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues#Gettin… You can send your log & image attached in a mail to me via pavelmc @ gmail . com, or via the chirp site link (needs a registered user) https://chirp.danplanet.com/issues/5481#note-37 Cheers Pavel CO7WT.

1 0

Re: [chirp_users] [CHIRP - New Model #5481] (In Progress) Wouxun KG-UV8E KG-UV8T KG-UV8D Plus
by D.J.J. Ring, Jr. 11 May '19

11 May '19

Call for users of the Wuoxun KG-UV8T to test compatibility with the new KG-UV8E driver. Thanks, Pavel. I'm sending to the CHIRP users list, too. Regards, David N1EA On Sun, May 12, 2019, 01:09 <donotreply(a)chirp.danplanet.com> wrote: > Issue #5481 has been updated by Pavel Milanes. > > - Status changed from Closed to In Progress > > Call for users of the Wuoxun KG-UV8T to test compatibility with the new > KG-UV8E driver. > > If you are a user of the Wuoxun KG-UV8T your help is needed to fully > support this radio with the Wuoxun KG-UV8E model. All evidence points that > the 8E & 8T are clones, but logs and images are needed to test that. > > We need you to try to download the information from a Wuoxun KG-UV8T using > the settings of the Wuoxun KG-UV8E in Chirp, if you success we need the > debug.log and the image saved of your radio. > > Here you can find how to get the debug.log: > https://chirp.danplanet.com/projects/chirp/wiki/How_To_Report_Issues#Gettin… > > Cheers Pavel CO7WT. > ------------------------------ > New Model #5481: Wouxun KG-UV8E KG-UV8T KG-UV8D Plus > <https://chirp.danplanet.com/issues/5481#change-17821> > > - Author: David J Ring Jr > - Status: In Progress > - Priority: Normal > - Assignee: Pavel Milanes > - Category: > - Target version: > - Chirp Version: daily > - Equipment Loan Offered: No > > Wouxun KG-UV8E KG-UV8T are triband V/UHF transceivers. > > This replaces page: > New Model #3943: WOUXUN KG-UV8E > > Which had to be deleted. > ------------------------------ > > You have received this notification because you have either subscribed to > it, or are involved in it. > To change your notification preferences, please click here: > http://chirp.danplanet.com/my/account >

1 0

[chirp_users] Questions about Wouxun driver.
by Mermaid 11 May '19

11 May '19

Hey everyone. And hats off to Pavel Milanes, and Bob Wickline . Quite happy that the Wouxun driver came out for the KG-UV8E / KG-UV8T. A much needed driver as those radios are getting quite popular. I have a question regarding the new driver as as well the old one that is based from. Even before this build, I’e seen using the KG-UV9D Plus driver, and have noticed the settings tab exists but empty, I notice this new version does the same for the KG-UV8E as well. Is having an empty settings tab normal or am I doing something weird?

2 1

[chirp_users] BF-888s
by Dan Jolley 11 May '19

11 May '19

I was up late last night working on this radio problem and I've been at it all morning. I've spent 20 minutes trying to figure out why my COM port quit working. Well, I forgot to turn the radio on.... I need a break and had a good laugh!

2 1

[chirp_users] Updated - In reference to Bug # 5027 - New Baofeng BF-888s started in English, but after being programmed they got stuck on Chinese and couldn't change back to English.
by Dan Jolley 11 May '19

11 May '19

Update May 11, 2019 - I got in touch with Amazon Product Support and they had a new BF-888s PDF Manual to download. I got to the part that said "ON CHANNEL 15, PRESS AND HOLD THE PTT AND MONI BUTTONS WHILE SWITCHING ON THE TRANSEIVER TO CHANGE THE VOICE PROMPT LANGUAGE (CHI / ENG)". I loaded the original Chinese image in English, then I loaded an image that I knew was already in English, but it was in Chinese. After doing the instructions, the image went back to English. So all the things I tried were in vain. I went back and read the BF-888s manual from 2016 and those instructions were there too, but I missed it. But I figured you guys already knew about it. I just thought I'd pass this along to others who did not know about it. Dan Jolley

2 2