- Users - lists.chirpmyradio.com

[chirp_users] New Daily Build
by Build System 13 Jul '19

13 Jul '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190713 A list of the changes included in this build (since the last daily) follows: Changes for Build #586 [Dan Smith <dsmith(a)danplanet.com>] Additional settings support for TK8180 Also, avoid registering if we are unable to import the future module. A gross hack for now, which will make this driver unavailable in the MacOS build currently, but this is the easiest solution to the much larger problem of not being runnable at all. Related to #743 Fixes #6095

1 0

[chirp_users] TYT UV8000D marked closed but not in daily
by Jeff 10 Jul '19

10 Jul '19

I saw on 7/3 the UV8000D/E drivers were marked completed and a daily build was made the same day however no drivers were pushed to source control. Possible mix up on status? Or code not pushed?

1 0

[chirp_users] [Ticket #8] chirp_users Digest, Vol 127, Issue 4
by howard＠small.com.au 09 Jul '19

09 Jul '19

This is a notification from the Help Desk. On Jul 10, 2019 @ 07:18 am, chirp_users-request(a)intrepid.danplanet.com wrote: Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Error setting memory - out of supported range [Baofeng] (Adam Nielsen) 2. Re: Error setting memory - out of supported range[Baofeng] (Neil B) 3. Re: Error setting memory - out of supported range [Baofeng] (Jim Unroe) ---------------------------------------------------------------------- Message: 1 Date: Wed, 10 Jul 2019 00:42:47 +1000 From: Adam Nielsen <a.nielsen(a)shikadi.net> Subject: [chirp_users] Error setting memory - out of supported range [Baofeng] To: chirp_users(a)intrepid.danplanet.com Message-ID: <20190710004247.7a2f8982(a)vorticon.teln.shikadi.net> Content-Type: text/plain; charset=US-ASCII Hi all, I'm new to Chirp and testing it with a Baofeng F8+III (supposedly an update on the UV-5R). I have successfully downloaded all the programmed frequencies (as both BF-F8HP and UV-5R models). I named some of the channels and uploaded them, and now the radio shows the names I entered instead of the frequencies - great! However I am unable to name some of the channels as I get an error when I attempt to do so: Error setting memory: Tx freq 0.000500 is out of supported range When I programmed in this frequency, I wanted to disable transmission so that I didn't accidentally transmit by mistake. I found some instructions online that suggested setting the split such that the transmission frequency ends up in a band that the radio cannot transmit on, and this indeed works - should I try to transmit the radio beeps with an error (if beeps are enabled) and no transmission occurs. I have now successfully downloaded all my programmed channels into Chirp, including those with invalid splits, and I can upload them back to the device as well, with the invalid splits being left unchanged. However it won't let me assign names to the channels having these out of range splits because the above error comes up. Is there any way I can tell Chirp that this isn't an error, and the frequency is intentionally out of range to prevent accidental transmission, and to accept the name of the channel I am trying to set? Many thanks, Adam. ------------------------------ Message: 2 Date: Tue, 9 Jul 2019 14:59:25 +0000 From: Neil B <ne.b(a)hotmail.co.uk> Subject: Re: [chirp_users] Error setting memory - out of supported range[Baofeng] To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CWLP123MB1827FFCB77ED1B4FE8CE5385D5F10(a)CWLP123MB1827.GBRP123.PROD.OUTLOOK.COM> Content-Type: text/plain; charset="iso-8859-1" if i recall correctly, in the duplex colum, select off. that stops tx. 73's ----- Original Message ----- From: "Adam Nielsen" <a.nielsen(a)shikadi.net> To: <chirp_users(a)intrepid.danplanet.com> Sent: Tuesday, July 09, 2019 3:42 PM Subject: [chirp_users] Error setting memory - out of supported range[Baofeng] > Hi all, > > I'm new to Chirp and testing it with a Baofeng F8+III (supposedly an > update on the UV-5R). I have successfully downloaded all the > programmed frequencies (as both BF-F8HP and UV-5R models). I named > some of the channels and uploaded them, and now the radio shows the > names I entered instead of the frequencies - great! > > However I am unable to name some of the channels as I get an error > when I attempt to do so: > > Error setting memory: Tx freq 0.000500 is out of supported range > > When I programmed in this frequency, I wanted to disable transmission > so that I didn't accidentally transmit by mistake. I found some > instructions online that suggested setting the split such that the > transmission frequency ends up in a band that the radio cannot transmit > on, and this indeed works - should I try to transmit the radio beeps > with an error (if beeps are enabled) and no transmission occurs. > > I have now successfully downloaded all my programmed channels into > Chirp, including those with invalid splits, and I can upload them back > to the device as well, with the invalid splits being left unchanged. > However it won't let me assign names to the channels having these out > of range splits because the above error comes up. > > Is there any way I can tell Chirp that this isn't an error, and the > frequency is intentionally out of range to prevent accidental > transmission, and to accept the name of the channel I am trying to set? > > Many thanks, > Adam. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to m1cfk at ne.b(a)hotmail.co.uk > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > ------------------------------ Message: 3 Date: Tue, 9 Jul 2019 12:32:10 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Error setting memory - out of supported range [Baofeng] To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U69SWY9PVYmY_gOzRuTMv_gU4-197njLutPPLqZT88R-Q(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" > When I programmed in this frequency, I wanted to disable transmission > so that I didn't accidentally transmit by mistake. I found some > instructions online that suggested setting the split such that the > transmission frequency ends up in a band that the radio cannot transmit > on, and this indeed works - should I try to transmit the radio beeps > with an error (if beeps are enabled) and no transmission occurs. This is only valid if you are only going to manual program your radio. CHIRP checks to make sure that both the RX frequency and TX frequency are within the capability of the radio. > I have now successfully downloaded all my programmed channels into > Chirp, including those with invalid splits, and I can upload them back > to the device as well, with the invalid splits being left unchanged. > However it won't let me assign names to the channels having these out > of range splits because the above error comes up. You can't edit invalidly programmed channels. You have to "fix" the errors. > Is there any way I can tell Chirp that this isn't an error, and the > frequency is intentionally out of range to prevent accidental > transmission, and to accept the name of the channel I am trying to set? No. What you have to do is switch to the method that CHIRP uses to inhibit TX on a memory channel of these radios. That would be to set the Duplex field to "off". After doing this, you should then be able to edit the Names as desired. Jim KC9HI ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 127, Issue 4 ******************************************* ------ This is an automated response. Your issue has been noted. We'll be in touch soon. Please reply to this email or visit the URL below with any additional details. http://SIS/portal/view-help-request/8

1 0

[chirp_users] Error setting memory - out of supported range [Baofeng]
by Adam Nielsen 09 Jul '19

09 Jul '19

Hi all, I'm new to Chirp and testing it with a Baofeng F8+III (supposedly an update on the UV-5R). I have successfully downloaded all the programmed frequencies (as both BF-F8HP and UV-5R models). I named some of the channels and uploaded them, and now the radio shows the names I entered instead of the frequencies - great! However I am unable to name some of the channels as I get an error when I attempt to do so: Error setting memory: Tx freq 0.000500 is out of supported range When I programmed in this frequency, I wanted to disable transmission so that I didn't accidentally transmit by mistake. I found some instructions online that suggested setting the split such that the transmission frequency ends up in a band that the radio cannot transmit on, and this indeed works - should I try to transmit the radio beeps with an error (if beeps are enabled) and no transmission occurs. I have now successfully downloaded all my programmed channels into Chirp, including those with invalid splits, and I can upload them back to the device as well, with the invalid splits being left unchanged. However it won't let me assign names to the channels having these out of range splits because the above error comes up. Is there any way I can tell Chirp that this isn't an error, and the frequency is intentionally out of range to prevent accidental transmission, and to accept the name of the channel I am trying to set? Many thanks, Adam.

3 2

[chirp_users] DMR CHIRP suggestions
by Michael MacLeod 04 Jul '19

04 Jul '19

Want to purchase a DMR radio that is supported by CHIRP. All my machines run OS X, so most OEM programming apps will not work. So I’m basically looking for CHIRP supported DMR handheld suggestions. Thanks! .\\

6 6

[chirp_users] chirp on CentOS 7
by Tracy Reed 04 Jul '19

04 Jul '19

I've had chirp running previously but that was a couple of years ago and I think I had CentOS 6 then. When I download the latest version OR run the version from the epel repo I get the following error: $ chirpw Traceback (most recent call last): File "/usr/bin/chirpw", line 24, in <module> from chirp.drivers import * File "/usr/lib/python2.7/site-packages/chirp/drivers/idrp.py", line 16, in <module> import serial File "/usr/lib/python2.7/site-packages/serial-0.0.97-py2.7.egg/serial/__init__.py", line 10, in <module> from . import utilities, abc, model, marshal, errors, properties, meta, hooks, test, request File "/usr/lib/python2.7/site-packages/serial-0.0.97-py2.7.egg/serial/model.py", line 1291 exec(source, namespace) SyntaxError: unqualified exec is not allowed in function 'from_meta' it contains a nested function with free variables I'm running the python 2.7.5 which came with CentOS 7. I've googled this and can't find anything related to chirp. There are some who claim it's a python bug but that seems unlikely as this is a very well used and tested version of python. Any ideas? I'm looking forward to getting my FT-60 which somehow lost all of its memory reloaded with my repeaters. Thanks! -- Tracy Reed

7 8

[chirp_users] New Daily Build
by Build System 03 Jul '19

03 Jul '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190703 A list of the changes included in this build (since the last daily) follows: Changes for Build #584 [Rick DeWitt <aa0rd(a)yahoo.com>] [IC-2730a] Update to Icom IC-2730A Issue #6711 Adding settings and fixing special channels.Issue #6711

1 0

Re: [chirp_users] Anytone 5888 Gets Frequency Step Error
by Charles Hargrove 02 Jul '19

02 Jul '19

Is there a way to get a copy of the source code for the Anytone 5888 so that I can help figure out where the bug is regarding step size errors? This is related to Bug #6851 on June 8, 2019 by Matt Kubiak. -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets 449.025/123.0 PL ARnewsline Broadcast Mon. @ 8:00PM NYC-ARECS Weekly Net Mon. @ 8:30PM http://www.nyc-arecs.org NY-NBEMS Net Saturdays @ 10AM & USeast-NBEMS Net Wednesdays @ 7PM on 7.036 Mhz USB (alt 3.536)/1500 hz waterfall spot; MFSK-16 or 32 "Information is the oxygen of the modern age. It seeps through the walls topped by barbed wire, it wafts across the electrified borders." - Ronald Reagan "The more corrupt the state, the more it legislates." - Tacitus "Molann an obair an fear" - Irish Saying (The work praises the man.) "No matter how big and powerful government gets, and the many services it provides, it can never take the place of volunteers." - Ronald Reagan

2 3

[chirp_users] UV-5R programming
by John Ulrich 29 Jun '19

29 Jun '19

Hi, I haven’t used my UV-5R or the old PC used for it’s programming in some time. I decided to download CHIRP to my Windows 10 PC and bring the UV-5R back to life. After connection, CHIRP asks you to fill in the empty box with a port number. I thought it would be something like Com3 or Com4. Nope. I get error message 3, saying no such location. I’m sure this is a newbie issue but I can’t find a solution. Anything to do with Windows 10? Thanks, John W6LRM

7 6

Re: [chirp_users] RS/GRE Pro93 Scanner
by Edwin W Luke 27 Jun '19

27 Jun '19

Chrissy is right on! Skip KL7IXX. On June 27, 2019, at 11:00 AM, Chrissy Hart <chris(a)engravedimage.com> wrote: I would think any radio that could theoretically be supported by CHIRP would be appreciated by someone, even if it's an RX only radio such as the Pro93. Chrissy KC8UFV On 2019-06-17 13:22, James Keener wrote: > I've been working on a small set of programs to work with a > RadioShack/GRE > Pro93 Scanner (https://github.com/jimktrains/pro93-talk). I was playing > around with creating a CHIRP driver last night and I think it would be > within my abilities. > > Would a driver for a scanner be something the project would be > interested > in? > > Thanks! > Jim > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Chris Hart at chris(a)engravedimage.com > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Skip KL7IXX at salty4568(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] RS/GRE Pro93 Scanner
by James Keener 27 Jun '19

27 Jun '19

I've been working on a small set of programs to work with a RadioShack/GRE Pro93 Scanner (https://github.com/jimktrains/pro93-talk). I was playing around with creating a CHIRP driver last night and I think it would be within my abilities. Would a driver for a scanner be something the project would be interested in? Thanks! Jim

4 3

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 19
by Eric Reed 25 Jun '19

25 Jun '19

* Please add device.* AnyTone AT-778UV and/or the Retevis RT95 to the supported device list. These two are the same radio. Thank you. On Mon, Jun 24, 2019 at 1:02 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: Transmit UV5r to FRS (Chef Todd) > 2. Re: Transmit UV5r to FRS (Paul Duer) > 3. Re: Transmit UV5r to FRS (Ed Sherlock) > 4. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Fred Erickson) > 5. Re: Transmit UV5r to FRS (Anthony Crespo) > 6. Rules, Radio capabilities, and CHIRP capabilities (Dan Clemmensen) > 7. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Dan Clemmensen) > 8. Re: Rules, Radio capabilities, and CHIRP capabilities > (Christopher Knowles) > 9. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (D.J.J. Ring, Jr.) > 10. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Christopher Knowles) > 11. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (David Evans) > 12. Re: Rules, Radio capabilities, and CHIRP capabilities > (Todd J. Unkefer) > 13. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Dave Gomberg) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 23 Jun 2019 22:20:26 -0400 > From: Chef Todd <tunkefer(a)gmail.com> > Subject: Re: [chirp_users] Transmit UV5r to FRS > To: JOCK SOUTAR <kc6iih(a)aol.com>, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CADb43z4vN1K= > ZMP7MnNf20LUv2zR6NyfzOo7WOiJ2MdSBf7VqA(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > A ha! Thank you. > > On Fri, Jun 21, 2019, 1:58 AM JOCK SOUTAR via chirp_users < > chirp_users(a)intrepid.danplanet.com> wrote: > > > The UV5R is illegal on FRS. > > The reason is because they are not type accepted. > > Main reason is because the antenna can be removed and replaced with other > > antennas. > > FRS radios have fixed antennas. > > > > Jock > > > > ------------------------------ > > On Thursday, June 20, 2019 Glenn At Home < > > chirp_users(a)intrepid.danplanet.com> wrote: > > Let's not play police here. > > I do believe that the FCC has allowed some of the FRS frequencies, now up > > to 2 watts. > > To answer the question, make sure the same frequencies are in the column > > next to the receive column. > > I don't recall if they are labeled RX and TX or what. > > Glenn > > > > *From:* John Wuest <jhwuest(a)gmail.com> > > *Sent:* Thursday, June 20, 2019 3:42 PM > > *To:* Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > > *Subject:* Re: [chirp_users] Transmit UV5r to FRS > > > > Using your UV-5R on FRS frequencies will be a violation of Federal Law. > > That radio is not, nor can not be, type accepted for that service. > > > > On Thu, Jun 20, 2019 at 4:25 PM Todd J. Unkefer <tunkefer(a)gmail.com> > > wrote: > > > > I can hear the FRS radios on their respective channels, I cannot transmit > > on those respective channels. How can I enable the transmit on chirp? > > > > Thanks, in advance. > > > > Todd > > > > > > > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to John Wuest at jhwuest(a)gmail.com > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > ------------------------------ > > > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Glenn at glennervin(a)cableone.net > > > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Jock at kc6iih(a)aol.com > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Todd J Unkefer at tunkefer(a)gmail.com > > To unsubscribe, send an email to > > chirp_users-unsubscribe(a)intrepid.danplanet.com >

1 0

[chirp_users] How can I use Chirp to re-use One Master File for multiple Radio Brands & Models?
by Bill Stewman 24 Jun '19

24 Jun '19

How can I use Chirp to re-use One Master File for multiple Radio Brands & Models? Our Church in Northeast Texas has over 400 licensed hams with various brands & models of Ham Radios. Is there some way for me to build One Master file of Repeaters that everyone can use to put all of us on the same ones? Thanks Bill Stewman - W5RQR The Church of Jesus Christ of Latter-day Saints Carrollton Storehouse Volunteer and Ham Radio Station Operator -- * IF you forward ANY emails --* * Please delete all of the OTHER recipients * * BEFORE hitting ENTER.* *ONward & UPward* *Bill Stewman - W5RQR **Cell Phone **678-414-2500* *8048 Cool River Dive **Home Phone **469-731-5144 * *Frisco, Texas 75036* *“If ye are prepared, ye shall not fear.”* * “When the time to act arrives, **the time to prepare has passed”* *"Hard work spotlights the character of people: * * some turn up their sleeves, * * some turn up their noses, and * * some don't turn up at all" - Sam Ewing*

12 15

[chirp_users] Rules, Radio capabilities, and CHIRP capabilities
by Dan Clemmensen 24 Jun '19

24 Jun '19

Colleagues: Our community is interested in three different things, and I feel we need to do a better job of separating them, because different folks have different situations. Rules: we are not all US Hams. Some are not US and some are not Hams. the rules and regulations differ by jurisdiction and depend on both the hardware you are using and the licences you hold. It may (or may not) be useful to comment on the rules, but when you do, please make sure you mention which jurisdiction, licence, and hardware. Radio capabilities: Each radio has its own hardware capabilities. Some of these capabilities interact with the rules in some jurisdictions, and sometimes rules change. There is no reason we cannot discuss hardware capabilities independently of the rules, since those capabilities are still usable in some jurisdictions and/or to some users under some circumstances. CHIRP capabilities: Hey, this is the CHIRP user group! We can and should discuss any CHIRP capabilities that may be usable by some CHIRP users in some situations. It is the responsibility of each user to understand the governing rules. It is not the responsibility of the CHIRP software or the CHIRP user community to attempt to enforce these rules, especially since the rules you are trying to enforce may not be applicable to the users you are addressing. A brief sentence to note that a particular capability may violate a rule in a particular situation may be acceptable if it becomes obvious that the user might need the reminder. (Thanks for your attention. I will get down off of my soapbox now.)

3 2

[chirp_users] Transmit UV5r to FRS
by Todd J. Unkefer 24 Jun '19

24 Jun '19

I can hear the FRS radios on their respective channels, I cannot transmit on those respective channels. How can I enable the transmit on chirp? Thanks, in advance. Todd

14 18

Re: [chirp_users] Transmit UV5r to FRS
by JOCK SOUTAR 24 Jun '19

24 Jun '19

The UV5R is illegal on FRS. The reason is because they are not type accepted. Main reason is because the antenna can be removed and replaced with other antennas. FRS radios have fixed antennas. Jock On Thursday, June 20, 2019 Glenn At Home <chirp_users(a)intrepid.danplanet.com> wrote: Let's not play police here.I do believe that the FCC has allowed some of the FRS frequencies, now up to 2 watts.To answer the question, make sure the same frequencies are in the column next to the receive column.I don't recall if they are labeled RX and TX or what.Glenn From: John Wuest Sent: Thursday, June 20, 2019 3:42 PMTo: Discussion of CHIRP Subject: Re: [chirp_users] Transmit UV5r to FRS Using your UV-5R on FRS frequencies will be a violation of Federal Law. That radio is not, nor can not be, type accepted for that service. On Thu, Jun 20, 2019 at 4:25 PM Todd J. Unkefer <tunkefer(a)gmail.com> wrote: I can hear the FRS radios on their respective channels, I cannot transmit on those respective channels. How can I enable the transmit on chirp? Thanks, in advance. Todd _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com_______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] UV5R "Variant" Programming Question
by N8GLS 21 Jun '19

21 Jun '19

Bought this UV5R (UV5R7W) at the Hamvention this past May. So, aside from this HT having a receiver front end that's susceptible to harmonics from DC to Daylight (yes have played with the squelch, wish it had a harmonic elimination button.hi hi), programming with Chirp is relatively easy. However, the Chirp programmer only seems to support a High or Low power level setting but this radio has three, High (7w or 8w depending on what document your looking at), Mid (4w or 5w), and Low (1w). In researching the UV5R I find this radio is steeped in a hodge-podge of variations, many un-documented, that seem to make it impossible to determine what I have. So, what I know is this is a UV5R7W, the 7w (or is it 8 ??) with three power levels High, Mid, Low. The firmware (holding #3 while powering on) is BFB298, Chirp Daily in "Other Settings" is returning for Firmware Msg 1, HN5RV01, and 1 for Firmware Msg 2. Don't understand why the two firmware numbers but makes me question which witch is which, especially when I search and find different spec's and documentation for each. So, is the UV5R model in Chirp the one to use ?? I think there is a VP programmer on the CD that came with the radio, is that a better choice, although there are a bunch of programs on that CD that appear to me to have nothing to do with this particular model..again a mystery with the lack of any supporting documentation, not even a readme. Any advice or sharing of knowledge would be appreciated !! Started searching the archives but thought since this radio was relatively new (I assume anyways) that someone else may have already been down this path. I know you get what you pay for, just want to give this a fair shot before repurposing this to be a service band and NWS monitor. Thanks, 73 de Brad, N8GLS

4 5

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 15
by Bill Stewman 20 Jun '19

20 Jun '19

Jim KC9HI and all other jenerous responders, Thank you All for your inputs... Jim seems to have the most practical solution to my situation. THANK YOU VERY MUCH! I plan to pursue this recommended path and hopefully be able to accomplish my goal of sharing details about a large spreadsheet file of 2,000+ lines with hundreds of my fellow North Texas Church Hams. 73 Bill Stewman - W5RQR -- * IF you forward ANY emails --* * Please delete all of the OTHER recipients * * BEFORE hitting ENTER.* *ONward & UPward* *Bill Stewman - W5RQR **Cell Phone **678-414-2500* *8048 Cool River Dive **Home Phone **469-731-5144 * *Frisco, Texas 75036* *“If ye are prepared, ye shall not fear.”* * “When the time to act arrives, **the time to prepare has passed”* *"Hard work spotlights the character of people: * * some turn up their sleeves, * * some turn up their noses, and * * some don't turn up at all" - Sam Ewing* On Thu, Jun 20, 2019 at 2:04 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. How can I use Chirp to re-use One Master File for multiple > Radio Brands & Models? (Bill Stewman) > 2. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (James Keener) > 3. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Christopher Knowles) > 4. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Christopher Knowles) > 5. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Amnon Zohar) > 6. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Christopher Knowles) > 7. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Jim Unroe) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 20 Jun 2019 09:30:58 -0500 > From: Bill Stewman <bill.stewman(a)gmail.com> > Subject: [chirp_users] How can I use Chirp to re-use One Master File > for multiple Radio Brands & Models? > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CAKfvv_msKJZ5_EOXujys=ANsV0hhFAvXEeeOC8O4= > TSxmKLzuA(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > How can I use Chirp to re-use One Master File for multiple Radio Brands & > Models? > > Our Church in Northeast Texas has over 400 licensed hams with various > brands & models of Ham Radios. > Is there some way for me to build One Master file of Repeaters that > everyone can use to put all of us on the same ones? > > Thanks > Bill Stewman - W5RQR > The Church of Jesus Christ of Latter-day Saints > Carrollton Storehouse Volunteer and Ham Radio Station Operator > > -- > * IF you forward ANY emails --* > * Please delete all of the OTHER recipients * > * BEFORE hitting ENTER.* > > *ONward & UPward* > > *Bill Stewman - W5RQR **Cell Phone **678-414-2500* > *8048 Cool River Dive **Home Phone **469-731-5144 * > *Frisco, Texas 75036* > > *?If ye are prepared, ye shall not fear.?* > * ?When the time to act arrives, **the time to prepare has passed?* > *"Hard work spotlights the character of people: * > * some turn up their sleeves, * > * some turn up their noses, and * > * some don't turn up at all" - Sam Ewing* >

1 0

[chirp_users] new update causes saved frequency 1 to populate all frequency windows
by Todd J. Unkefer 16 Jun '19

16 Jun '19

I just updated to the new version of chirp today, 16JUN2019. I download saved from radio, edit saved, upload to radio, as I have done 100 times or more. I have 20 saved. I deleted #1, then all frequencies changed to match my 2nd saved frequency. No matter what my first saved frequency is, it overrides all other frequencies in saved and changes ALL frequencies to match what is in the first saved frequency box. The name label fields don’t change at all, but the frequency field does. What can I do to stop this override so all boxes don’t populate with the same frequency? This is maddening.

2 1

[chirp_users] Anytone 5888 Gets Frequency Step Error
by Charles Hargrove 14 Jun '19

14 Jun '19

I am reprogramming my 5888 after two years. I have been able to use CHIRP in the past, but now the last few versions (6/1 and prior) throws up an error whenever I try to edit a frequency with 4 digits after the decimal. "Error setting memory: Frequency requires 12.50kHz step" I know that a bug report was filed by someone recently, but I would like to know if the issue is being looked at. I can not tell you what version did work as I update as soon as the new one is released. The last time that I programmed the 4 digit frequency was in the summer of 2017. -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets 449.025/123.0 PL ARnewsline Broadcast Mon. @ 8:00PM NYC-ARECS Weekly Net Mon. @ 8:30PM http://www.nyc-arecs.org NY-NBEMS Net Saturdays @ 10AM & USeast-NBEMS Net Wednesdays @ 7PM on 7.036 Mhz USB (alt 3.536)/1500 hz waterfall spot; MFSK-16 or 32 "Information is the oxygen of the modern age. It seeps through the walls topped by barbed wire, it wafts across the electrified borders." - Ronald Reagan "The more corrupt the state, the more it legislates." - Tacitus "Molann an obair an fear" - Irish Saying (The work praises the man.) "No matter how big and powerful government gets, and the many services it provides, it can never take the place of volunteers." - Ronald Reagan

1 0

[chirp_users] Yaesu FTM-400
by Fugawee 14 Jun '19

14 Jun '19

So I finally found a need to subscribe to the list. Excellent program working fine on most of my radios. Question is now,Is there any way to open Yaesu's FTM-400 .dat file and edit it? (MEMFTM400D.dat) I have copied the file from the SD card to the computer and tried various radios to open file, of course none worked. Any hints here or an I relegated to buying the RT software? Thanks Much! /John <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

4 4

[chirp_users] Mac IC80AD RTSytems Cable
by Chip Griffin 12 Jun '19

12 Jun '19

I’m getting an "AttributeError: 'Serial' object has no attribute ‘get_payload’” error when I try to read from my Icom IC-80AD. It’s instantaneous to when I start. I’ve looked at drivers and can’t find the alleged Apple FTDI driver. When I look in the directory IOUSBFamily.ktext I only see the following options: AppleLegacyUSBAudio.kext/ IOUSBCompositeDriver.kext/ IOUSBHIDDriverSafeBoot.kext/ AppleUSBLegacyHub.kext/ IOUSBHIDDriver.kext/ IOUSBLib.bundle/ AppleUSBMergeNub.kext/ IOUSBHIDDriverPM.kext/ IOUSBUserClient.kext/ When I do a $ ls /dev/cu* I see: /dev/cu.Bluetooth-Incoming-Port /dev/cu.usbserial-RT3P07W9 I’ve tried both. Bluetooth doesn’t even come close to happiness and the RT3P07W9 one gives me the above error. I do have the KK7DS stuff installed, even tried installing it a second time to be sure. I also tried on my Vista machine with even more pathetic results. -- Chip

3 2

[chirp_users] missing libxml2 Debian MX
by Galen Thurber 11 Jun '19

11 Jun '19

# python chirpw Traceback (most recent call last): File "chirpw", line 24, in <module> from chirp.drivers import * File "/home/galen/chirp-daily/chirp/drivers/generic_xml.py", line 17, in <module> import libxml2 ImportError: No module named libxml2 libxml2 is installed what am I missing? -- Hi I've been on-line since late 1992. I'm a: Skeptic, Secular Humanist, Bright R.I.P. Reject Identity Politics My computer recommendations: MX Linux <https://mxlinux.org/i> operating system, Passwordsafe <https://www.pwsafe.org/>, Pidgin Internet Messenger, tor anonymous browsing bundle. ALERTS: Fact or fiction <http://snopes.com>? SCAM <http://quackwatch.com> Supplements Complimentary Alternative Medicine These companies have unjustly life-banned me: Eastlink, Facebook,Yahoo!, Microsoft Chat XMPP: galen(a)jabber.at

2 5

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 8 Message: 4
by Christopher F. Beesley 10 Jun '19

10 Jun '19

That's not right John. You can hear FAX data if you know where to look, you can hear Packet Radio, and you can hear computer programs if you've still got a home computer from the 80's. They, and others, are all serial data and as you can hear them then they must be in the audio spectrum. Closer to our homes as Radio Amateurs, even Morse Code is a form of serial data. Most of it can be controlled by a volume control as fitted to cassette players, CW receivers, and Packet Radio transmitters and receivers. If the volume control was turned down to zero, you wouldn't hear anything from any of them. Nor would the computer, the TNC or the FAX machine. Which is all very well, but I'm inclined to believe the people who say that the data in/out connectors on hand-helds don't use the audio channels (speaker and microphone) because a) its an obvious way to ensure data coms reliability, and b) its the way I would do it. But... The accountants would argue that the two extra terminals fitted to each of several million radio sets would amount to millions of yen in lost profit. So the early versions might be as designed by the engineers, i.e. two distinct interfaces (audio and data) but the later versions might be made to the lower specification as defined by the accountants. I can therefore see a case where, if you've got a later version, you would need to adjust the volume control when programming the memories. Two solutions: a) make sure your manual applies EXACTLY to the model you've got, especially if bought second-hand, and b) experiment. I'm sure other solutions are available from a variety of sources. Message: 4 Date: Sat, 8 Jun 2019 20:53:01 -0400 From: John Kemker <kemkerj3(a)gmail.com> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CA+r6kYQu-CNcRGVpdJ0AYbF1rtFhfUx+CxG8ft4bN4FRvORe0g(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" exactly The data is serial data, which is not in the audio spectrum. There's no "modem" on either end of the cable. It's straight RS-232C data as might come out of the back of an older PC. Volume has nothing to do with it, as it's either "on" or "off." ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: 10 June 2019 19:00 To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 126, Issue 8 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: chirp_users Digest, Vol 126, Issue 7 (jeff riddlebaugh) 2. Re: chirp_users Digest, Vol 126, Issue 7 (Glenn At Home) 3. Re: chirp_users Digest, Vol 126, Issue 7 Chirp (Gary Craig) 4. missing libxml2 Debian MX (Galen Thurber) 5. Re: missing libxml2 Debian MX (Barry Jackson) 6. Re: chirp_users Digest, Vol 126, Issue 7 (Jim Unroe) 7. Re: missing libxml2 Debian MX (Barry Jackson) 8. Re: BF888 Settings tab items not saved (George Reywer) ---------------------------------------------------------------------- Message: 1 Date: Sun, 9 Jun 2019 19:22:56 +0000 From: jeff riddlebaugh <jeff630(a)live.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <DM6PR19MB3339D1A03CAEB4EBD031E86799120(a)DM6PR19MB3339.namprd19.prod.outlook.com> Content-Type: text/plain; charset="windows-1252" I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don?t know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R. Thanks jeff Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: Sunday, June 9, 2019 3:00:03 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 126, Issue 7 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: UV-5R and volume. (JD Morrow) 2. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 3. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 4. Re: UV-5R and volume. (John Kemker) 5. Adding 2m and 70cm repeaters (David) 6. Re: Adding 2m and 70cm repeaters (Jim Unroe) 7. Re: Adding 2m and 70cm repeaters (David) 8. Re: Adding 2m and 70cm repeaters (Amnon Zohar) 9. BF888 Settings tab items not saved (Barry Jackson) 10. Yaesu ft-2dr programming cable (Rodney D. Myers) ---------------------------------------------------------------------- Message: 1 Date: Sat, 8 Jun 2019 16:16:55 -0400 From: "JD Morrow" <ngauge75(a)verizon.net> Subject: Re: [chirp_users] UV-5R and volume. To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <62FFB68360F84463A8D8FFCE40A3C5D4@Laptop15> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original All, Have been programming multiple (15+/-) UV-5's, for our group, for several years. Never have had to mess with the volume. Versions of hardware at the beginning was the worst. Cables and drivers, were a pain for a while to, but not the radio controls. 73's JD k2txv -----Original Message----- From: Jim Unroe Sent: Saturday, June 8, 2019 1:22 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV-5R and volume. On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data > is being communicated to/from the radio over the external radio audio > port, the radio volume control needs to be set midrange for the cable to > "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG The digital data is proviced on connections that have nothing to do with the connections for the analog speaker audio or the analog microphone audio. In addition to the audio wires (that aren't included in the programming cable since they are not necessary to have for programming) and the data wires, there is even a connection that provides DC voltage (5V or 3.3V depending on the radio) to power external devices. http://www.miklor.com/COM/UV_Technical.php#spkrmic Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at ngauge75(a)verizon.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com ------------------------------ Message: 2 Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Don Goodrich <don.goodrich(a)cheerful.com> Message-ID: <2139978547.224644.1560028246453(a)email.ionos.com> Content-Type: text/plain; charset="utf-8" Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode. > On 08 June 2019 at 12:48 Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG > > > > > Sent: Saturday, June 08, 2019 at 7:12 AM > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com>, "Dennis Wage" <dwage(a)dwage.com> > Subject: Re: [chirp_users] UV-5R and volume. > > True. The setting of the volume control has NOTHING to do with programming. > > If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it. > > > > > > On 08 June 2019 at 06:54 Dennis Wage <dwage(a)dwage.com> wrote: > > > > Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. > > > > Let's once and for all dispel or confirm this. > > > > I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. > > > > Please confirm or deny. > > > > Thanks, > > > > Dennis M. Wage (W9BOQ) > > > > 245 Corum Hill Road > > Castalian Springs, TN 37031 > > (615) 310-4242 Cell > > (615) 562-5128 Home > > http://hammondb3organ.net/ > > http://overdubs.net > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > > > > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich(a)cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net

1 0

Re: [chirp_users] BF888 Settings tab items not saved
by George Reywer 10 Jun '19

10 Jun '19

Hi Barry, A change in the firmware of the BF-888S has resulted in the contents of the settings tab not being correctly saved to the radio. (It also resulted in the voice prompt language changing to Chinese on the newer radios I programmed.) The work around is to change these settings manually on the radio as follows: * On channel 10, Press and Hold the PTT and MONI buttons while switching ON the transceiver to activate/deactivate Voice Prompts. * On channel 15, Press and Hold the PTT and MONI buttons while switching ON the transceiver to change Voice Prompt Language George M0IAS ------------------------------------------------------------- Hi, Has anyone had an issue with Baofeng 888 items on the settings tab (not memories) not being saved on upload? I am primarily trying to disable voice prompts, however after editing the downloaded image and uploading it, the next time I download it, the setting has reverted (or was never saved).

1 0

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7
by jeff riddlebaugh 10 Jun '19

10 Jun '19

I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don’t know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R. Thanks jeff Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: Sunday, June 9, 2019 3:00:03 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 126, Issue 7 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: UV-5R and volume. (JD Morrow) 2. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 3. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 4. Re: UV-5R and volume. (John Kemker) 5. Adding 2m and 70cm repeaters (David) 6. Re: Adding 2m and 70cm repeaters (Jim Unroe) 7. Re: Adding 2m and 70cm repeaters (David) 8. Re: Adding 2m and 70cm repeaters (Amnon Zohar) 9. BF888 Settings tab items not saved (Barry Jackson) 10. Yaesu ft-2dr programming cable (Rodney D. Myers) ---------------------------------------------------------------------- Message: 1 Date: Sat, 8 Jun 2019 16:16:55 -0400 From: "JD Morrow" <ngauge75(a)verizon.net> Subject: Re: [chirp_users] UV-5R and volume. To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <62FFB68360F84463A8D8FFCE40A3C5D4@Laptop15> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original All, Have been programming multiple (15+/-) UV-5's, for our group, for several years. Never have had to mess with the volume. Versions of hardware at the beginning was the worst. Cables and drivers, were a pain for a while to, but not the radio controls. 73's JD k2txv -----Original Message----- From: Jim Unroe Sent: Saturday, June 8, 2019 1:22 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV-5R and volume. On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data > is being communicated to/from the radio over the external radio audio > port, the radio volume control needs to be set midrange for the cable to > "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG The digital data is proviced on connections that have nothing to do with the connections for the analog speaker audio or the analog microphone audio. In addition to the audio wires (that aren't included in the programming cable since they are not necessary to have for programming) and the data wires, there is even a connection that provides DC voltage (5V or 3.3V depending on the radio) to power external devices. http://www.miklor.com/COM/UV_Technical.php#spkrmic Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at ngauge75(a)verizon.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com ------------------------------ Message: 2 Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Don Goodrich <don.goodrich(a)cheerful.com> Message-ID: <2139978547.224644.1560028246453(a)email.ionos.com> Content-Type: text/plain; charset="utf-8" Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode. > On 08 June 2019 at 12:48 Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG > > > > > Sent: Saturday, June 08, 2019 at 7:12 AM > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com>, "Dennis Wage" <dwage(a)dwage.com> > Subject: Re: [chirp_users] UV-5R and volume. > > True. The setting of the volume control has NOTHING to do with programming. > > If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it. > > > > > > On 08 June 2019 at 06:54 Dennis Wage <dwage(a)dwage.com> wrote: > > > > Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. > > > > Let's once and for all dispel or confirm this. > > > > I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. > > > > Please confirm or deny. > > > > Thanks, > > > > Dennis M. Wage (W9BOQ) > > > > 245 Corum Hill Road > > Castalian Springs, TN 37031 > > (615) 310-4242 Cell > > (615) 562-5128 Home > > http://hammondb3organ.net/ > > http://overdubs.net > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > > > > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich(a)cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net

3 2

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7 Chirp
by Gary Craig 10 Jun '19

10 Jun '19

Jeff, Instead of using the Baofeng software, use Chirp which is the program this list is designed for. Go to: https://chirp.danplanet.com/projects/chirp/wiki/Download and choose the version for the operating system used on your computer. Read thru the info on the Chirp website that will help you use the program and also check out http://www.miklor.com/ which supports Chirp use and has lots of good info. I have used Chirp to program the UV-5R, UV-82C, and UV-82HP. In fact just this weekend programmed 15 of the UV-82C's. Had to do some wiggling of the connector on a couple to get them to communicate. It has to be fully seated and make good contact in the sockets. There is an article and picture on the Miklor site about having to trim a little on some programming cables to get that to happen. Welcome to the list and have fun! 73 Gary Craig KI5CCD Maintenance Webco Distribution Texas 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext.107 Fax 918-246-7045 gcraig(a)webcoindustries.com<mailto:gcraig@webcoindustries.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of jeff riddlebaugh Sent: Sunday, June 9, 2019 2:23 PM To: chirp_users(a)intrepid.danplanet.com Subject: Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7 This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don't know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R. Thanks jeff Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com<mailto:chirp_users-bounces@intrepid.danplanet.com> <chirp_users-bounces(a)intrepid.danplanet.com<mailto:chirp_users-bounces@intrepid.danplanet.com>> on behalf of chirp_users-request(a)intrepid.danplanet.com<mailto:chirp_users-request@intrepid.danplanet.com> <chirp_users-request(a)intrepid.danplanet.com<mailto:chirp_users-request@intrepid.danplanet.com>> Sent: Sunday, June 9, 2019 3:00:03 PM To: chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Subject: chirp_users Digest, Vol 126, Issue 7 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com<mailto:chirp_users-request@intrepid.danplanet.com> You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com<mailto:chirp_users-owner@intrepid.danplanet.com> When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: UV-5R and volume. (JD Morrow) 2. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 3. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 4. Re: UV-5R and volume. (John Kemker) 5. Adding 2m and 70cm repeaters (David) 6. Re: Adding 2m and 70cm repeaters (Jim Unroe) 7. Re: Adding 2m and 70cm repeaters (David) 8. Re: Adding 2m and 70cm repeaters (Amnon Zohar) 9. BF888 Settings tab items not saved (Barry Jackson) 10. Yaesu ft-2dr programming cable (Rodney D. Myers) ---------------------------------------------------------------------- Message: 1 Date: Sat, 8 Jun 2019 16:16:55 -0400 From: "JD Morrow" <ngauge75(a)verizon.net<mailto:ngauge75@verizon.net>> Subject: Re: [chirp_users] UV-5R and volume. To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>> Message-ID: <62FFB68360F84463A8D8FFCE40A3C5D4@Laptop15> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original All, Have been programming multiple (15+/-) UV-5's, for our group, for several years. Never have had to mess with the volume. Versions of hardware at the beginning was the worst. Cables and drivers, were a pain for a while to, but not the radio controls. 73's JD k2txv -----Original Message----- From: Jim Unroe Sent: Saturday, June 8, 2019 1:22 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV-5R and volume. On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich(a)cheerful.com<mailto:don.goodrich@cheerful.com>> wrote: > > Certainly the computer volume control has no influence but since the data > is being communicated to/from the radio over the external radio audio > port, the radio volume control needs to be set midrange for the cable to > "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com<mailto:don.goodrich@Cheerful.com> > AF7DG The digital data is proviced on connections that have nothing to do with the connections for the analog speaker audio or the analog microphone audio. In addition to the audio wires (that aren't included in the programming cable since they are not necessary to have for programming) and the data wires, there is even a connection that provides DC voltage (5V or 3.3V depending on the radio) to power external devices. http://www.miklor.com/COM/UV_Technical.php#spkrmic Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at ngauge75(a)verizon.net<mailto:ngauge75@verizon.net> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> ------------------------------ Message: 2 Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net<mailto:nigel@ngunn.net>> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>>, Don Goodrich <don.goodrich(a)cheerful.com<mailto:don.goodrich@cheerful.com>> Message-ID: <2139978547.224644.1560028246453(a)email.ionos.com<mailto:2139978547.224644.1560028246453@email.ionos.com>> Content-Type: text/plain; charset="utf-8" Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode. > On 08 June 2019 at 12:48 Don Goodrich <don.goodrich(a)cheerful.com<mailto:don.goodrich@cheerful.com>> wrote: > > Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com<mailto:don.goodrich@Cheerful.com> > AF7DG > > > > > Sent: Saturday, June 08, 2019 at 7:12 AM > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net<mailto:nigel@ngunn.net>> > To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>>, "Dennis Wage" <dwage(a)dwage.com<mailto:dwage@dwage.com>> > Subject: Re: [chirp_users] UV-5R and volume. > > True. The setting of the volume control has NOTHING to do with programming. > > If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it. > > > > > > On 08 June 2019 at 06:54 Dennis Wage <dwage(a)dwage.com<mailto:dwage@dwage.com>> wrote: > > > > Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. > > > > Let's once and for all dispel or confirm this. > > > > I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. > > > > Please confirm or deny. > > > > Thanks, > > > > Dennis M. Wage (W9BOQ) > > > > 245 Corum Hill Road > > Castalian Springs, TN 37031 > > (615) 310-4242 Cell > > (615) 562-5128 Home > > http://hammondb3organ.net/ > > http://overdubs.net > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net<mailto:nigel@ngunn.net> > > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > > > > > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net<mailto:nigel@ngunn.net> www http://www.ngunn.net > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich(a)cheerful.com<mailto:don.goodrich@cheerful.com> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net<mailto:nigel@ngunn.net> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net<mailto:nigel@ngunn.net> www http://www.ngunn.net

1 0

[chirp_users] Yaesu ft-2dr programming cable
by Rodney D. Myers 09 Jun '19

09 Jun '19

Just bought a Yaesu ft-2dr. I thought I purchased a programming cable. I grabbed a cloning cable instead. Which cable is the correct to use? Main programming computer is a debian (linux) laptop. Thanks -- Rodney D. Myers <RodneyMyers60(a)yahoo.com> - kg6anx They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Ben Franklin - 1759

1 0

[chirp_users] BF888 Settings tab items not saved
by Barry Jackson 09 Jun '19

09 Jun '19

Hi, Has anyone had an issue with Baofeng 888 items on the settings tab (not memories) not being saved on upload? I am primarily trying to disable voice prompts, however after editing the downloaded image and uploading it, the next time I download it, the setting has reverted (or was never saved). Editing the hex in the browser produces the same result. Does anyone know the significance of the red highlighted values? Chirp version is CHIRP daily-20190412 and I see nothing in the change log since then related to the BF888. One thing I notice is that the progress bar on upload moves very quickly after about half way, whereas the download is at a steady rate, which makes me wonder if it skips part of the upload. Cable is a marked up as Baofeng and is regularly used with the UV5R without problems. OS is Mageia Linux using our official package which is maintained by me. Any ideas welcome. Cheers, Barry

1 0

[chirp_users] Adding 2m and 70cm repeaters
by David 09 Jun '19

09 Jun '19

Hi everyone, You guys were incredibly helpful recently in getting me started. I've now successfully uploaded marine VHF, 2m and 70cm simplex channels to my Baofeng UV-5R III, thanks again. I'm now having a few problems in adding repeaters and I hope you can similarly help. I have a CHIRP file for relevant UK repeaters. I'm guessing that they are from an older version of CHIRP as some of the column headings are different. I'm manually entering the info. All ok except these. The (old) file of repeaters shows these columns: Tone. rToneFreq. cToneFreq. DtcsCode. DtcsPolarity. Tstep I'm trying to enter:- Tone, always Tone rToneFreq, either 110.9, 82.5 or 103.5. cToneFreq, always 88.5 DtcsCode, always 23 DtcsPolarity, always NN My version of CHIRP isn't quite the same. Here are my issues. In CHIRP, I populate Tone Mode to Tone. My next 2 columns are Tone and Tone Sql. I seem only able to enter one of these columns as when I enter the second it automatically changes the previous Tone Mode to another preset. Simialrly, the Tone Mode autochanges when I try to populate any of the DTCS Code, DTC Rx Code and Cross Mode. Hopefully, I've explained the issue clearly. Any ideas what I'm doing wrong. Thanks in advance Kind regards David G4PYH

3 3

[chirp_users] UV-5R and volume.
by Dennis Wage 09 Jun '19

09 Jun '19

Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. Let's once and for all dispel or confirm this. I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. Please confirm or deny. Thanks, Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net

7 8

Re: [chirp_users] UV-5R and volume.
by Tom Consodine, ND5Y 08 Jun '19

08 Jun '19

What directions? Tom ND5Y > Then why is doing that explicitly stated in the directions? >

3 2

[chirp_users] baofeng uv5r
by Don Morgan 08 Jun '19

08 Jun '19

I have 2 of these radios and can't seem to get a good rec signal on them. I get the local sheriff dispatch but do not get the patrol car return. When the bad weather was coming in I tuned to 162.55 which is the weather service for my area. I got a very noisy signal and got in car and drove around to see if it changed. It did come in better in several places but no way acceptable in an emergency. Is their a better antenna available for these? Any other suggestions would be appreciated. DON

6 5

[chirp_users] Second Attempt cant program my radio
by gearjam＠ken-tennwireless.com 08 Jun '19

08 Jun '19

I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime

9 8

Re: [chirp_users] Second Attempt cant program my radio Uv82S35
by Gary Craig 07 Jun '19

07 Jun '19

Steve Prime, Uv82S35 is a different program than Chirp. It is the Baofeng software, available on Btech and other sites. Go to https://chirp.danplanet.com/projects/chirp/wiki/Download and download the version of Chirp that works with your operating system. Gary Craig KI5CCD Maintenance Webco Distribution Texas 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext.107 Fax 918-246-7045 gcraig(a)webcoindustries.com<mailto:gcraig@webcoindustries.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of D.J.J. Ring, Jr. Sent: Friday, June 7, 2019 7:42 AM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] Second Attempt cant program my radio This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious What radio do you have? Is it supported? What Operating System are you using? What USB port have you selected? 73 David N1EA On Wed, Jun 5, 2019, 20:53 <gearjam(a)ken-tennwireless.com<mailto:gearjam@ken-tennwireless.com>> wrote: I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea(a)arrl.net<mailto:n1ea@arrl.net> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com>

1 0

[chirp_users] Help for newb continued”Checksum
by Karen Chancellor 06 Jun '19

06 Jun '19

I got rid of chirp pkg from Ubuntu and installed daily via ppa as per instructions. I get “Checksum Failed [0000-1FB9 (@1FBA)]” Same every time. I am using cable from Mirkit. Help appreciated.

1 0

[chirp_users] Help for newb, Linux, Yaesu vx-5r
by Karen Chancellor 06 Jun '19

06 Jun '19

I couldn’t get chirp to work on Mac and am now trying to with Linux. I am using the latest version on Ubuntu 18.04-1. When I attempt download from Yaesu vx-5r, the progress bar indicates downloading, but at the end I get “Failed to communicate with the radio: Recieved incomplete image from radio”. There is also a CLONE ERROR on the radio. Your assistance will be much appreciated. If there is output you would like to see, please let me know. Thank you.

1 0

Re: [chirp_users] Second Attempt cant program my radio
by JOCK SOUTAR 06 Jun '19

06 Jun '19

I use cables from rt systems. Never had one not work. On your cable bake sure it is seating all the way in . I have seen this problem on a friend's trying to help him get his Baeofeng UV - 5 R programed. Luckily I had my cable out in my vehicle in his driveway. Rather than getting stressed we used my cable and it worked first time we tried. On Wednesday, June 5, 2019 gearjam <chirp_users(a)intrepid.danplanet.com> wrote: I bought $20.00 program cable from Amazon. Had to download driver CDM v2.12.28 WHQL Certified. Downloaded CHIRP UV82S35. When I click on "Read data from radio" a small window opens that says "Read data from radio" with three tabs, "Read", "Cancel" and "Help". When I click on Read I get another small window that says "Operation Prompt" with the message "! Fail connect with transceiver". When I click on Help nothing happens. Cable is firmly plugged into radio to the second click. Tried dampening the pins for a better connection as per the Baofeng instructions. I've also tried the radio on both channel mode and frequency mode. Checked Miklor.com to no avail. I accidently keyed the PPT button and heard a buzz from my computer speakers so I believe I have a connection with the cable. Any advice??????? Steve Prime _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 2

[chirp_users] Elementary help for novice requested!
by David 05 Jun '19

05 Jun '19

I've just bought a Baofeng UV-5R III and I'd like to use it for marine vhf and 2m and 70cm amateur bands. I've held a ham license since the 1980s but have been inactive for many years. I've succeeded with "Download from radio". I've also opened a new page to "Import from stock config" to open FR marine vhf. I can't seem to be able to "File; save" or "File; save as"? When I'm on the marine vhf page, I can not "upload to radio" The text is greyed out? All help gratefully received! Many thanks David, G4PYH Cheshire, UK

7 11

[chirp_users] no daily for Uubutu 19.04 Disco Dingo
by WILLIAM PALMER 02 Jun '19

02 Jun '19

Hello, I can not find the daily update for Ubuntu 19.04 "Disco Dingo" any where, and PPA returns error message that there is no release for this version. Help Please, Billy

2 1

[chirp_users] Ok
by dean duncan 01 Jun '19

01 Jun '19

Sent from my iPad

1 0

[chirp_users] New Daily Build
by Build System 01 Jun '19

01 Jun '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190601 A list of the changes included in this build (since the last daily) follows: Changes for Build #582 [Jim Unroe <rock.unroe(a)gmail.com>] [GMRS-50X1] Fix TX Power Level Setting Issue This patch updates the "memory" structure to support 3 TX power levels. #6821

1 0

Re: [chirp_users] chirp_users Digest, Vol 125, Issue 22
by Gary Schelske 01 Jun '19

01 Jun '19

Are the frequency’s your down loading activated in the 5R ? Make sure it is opened up to allow the frequency’s your installing. Check coverage activation..

1 0

Re: [chirp_users] Elementary help for novice requested! youtube video
by Gary Craig 31 May '19

31 May '19

David, I checked out the video and there are a couple of caveats. First when he gets to the part where he is using Chirp the sound level drops drastically. Hope you have some amplified speakers... He is also running on a Mac not Windows. You will see when he goes to choose the connection for the radio it shows a usb device. That doesn't happen on the Windows version of Chirp. You only see the choices for Comm ports. Since you were able to download from the radio you had to have gotten that right. Device Manager will show you it you ever have problems. There may be others but i quit watching after that point because of the poor audio. There may be other videos out there. From my past experiences, you need to make sure you have a fairly new version of Chirp. I could never cut, copy, or paste in the memory areas on my Win 7 laptop until they upgraded the windows install months back. Then finally i could start using it. You will have to play around with it to get the hang of it. Once you get that first one under your belt you will look forward to working with it. Have fun and 73. Be blessed! May 2019 be our year of change & growth! Gary Craig KI5CCD Maintenance Webco Industries Texas Distribution 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext. 107 Fax 918-246-7045 gcraig(a)webcotube.com<mailto:gcraig@webcotube.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of David Sent: Friday, May 31, 2019 10:40 AM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] Elementary help for novice requested! This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious Jim and Tom, Thank you for your helpful, informative and welcoming responses. I’m pretty sure that I understand everything you’ve written. I’m using an HP laptop running W7. I have a second HP laptop running W10 but I prefer the other machine. I’ve already tried to copy and paste the marine vhf stock configuration but I highlighted all rows, select all, copy, paste into a file, new. It didn’t work but I’ll try again one row at a time. I’m still having issues with file/save and file/save as. As I click on either action, the screen simply reverts to the open page. Sounds pretty simple but I haven’t yet found a way to save/change name as save! Hopefully. The YouTube video will help. I’m now away from home for the weekend but based upon your feedback I’ll be enthusiastically trying again on Monday! Kind regards David Sent from my iPhone On 31 May 2019, at 12:48, Tom Henderson <Tom(a)henderson4.us<mailto:Tom@henderson4.us>> wrote: Look at the tab for the file you have open that you're trying to write to the radio. If it says something like "Generic CSV" a the beginning, you can't write that to a radio. The problem is that you're opening a new file, or at least that's what you said you were doing in your original email. The only files you can write to a radio are files that were created by reading from a radio. The name on the tab should be the model of the radio you pulled it from. Save an unmodified version, then import the stock config into the file you got from the radio, save it again with a new name, then write it to the radio. If "Upload to radio" is blank, it's most likely the tab you have open didn't come from a radio. Check out this youtube video - https://www.youtube.com/watch?v=0l_kdktZAkI At 4:40, he has just pulled the config from the radio. At 7:00, he starts importing VHF channels At 11:00, he uploads the file he just finished downloading and modifying back to the radio. Tom Henderson On 5/31/19 6:08 AM, David wrote: Thanks for the response, Tom, much appreciated. Your description is pretty much what I’m trying, unsuccessfully, to achieve. I don’t seem able to either “file, save” or “file, save as”. Clicking on either doesn’t appear to work. When I’m on the page with “stock configuration” the “send to radio” option is greyed out. I’ve tried a few times but always the same result. My next step is probably to download the chirp software and try again. Otherwise, I’m stuck! Regards David Sent from my iPhone On 31 May 2019, at 11:52, Tom Henderson <Tom(a)henderson4.us<mailto:Tom@henderson4.us>> wrote: Sounds like you're missing a step. Once you've downloaded successfully from the radio, save that file and keep it in case you ever want to go back to the settings it came out of the box with. Next, with that file still open, select "radio" from the top menu, "Import from stock config," and then select the UHF channels you need. Now save the modofied file under a new name, and with that file still open, try writingback to the radio. Hope that helps! KW4TOM Tom Henderson On 5/31/19 2:16 AM, David wrote: I've just bought a Baofeng UV-5R III and I'd like to use it for marine vhf and 2m and 70cm amateur bands. I've held a ham license since the 1980s but have been inactive for many years. I've succeeded with "Download from radio". I've also opened a new page to "Import from stock config" to open FR marine vhf. I can't seem to be able to "File; save" or "File; save as"? When I'm on the marine vhf page, I can not "upload to radio" The text is greyed out? All help gratefully received! Many thanks David, G4PYH Cheshire, UK _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom(a)henderson4.us<mailto:tom@henderson4.us> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to davidp.jackson(a)hotmail.co.uk<mailto:davidp.jackson@hotmail.co.uk> at davidp.jackson(a)hotmail.co.uk<mailto:davidp.jackson@hotmail.co.uk> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom(a)henderson4.us<mailto:tom@henderson4.us> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to davidp.jackson(a)hotmail.co.uk<mailto:davidp.jackson@hotmail.co.uk> at davidp.jackson(a)hotmail.co.uk<mailto:davidp.jackson@hotmail.co.uk> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com>

1 0

[chirp_users] First time user (help)
by Graham S 29 May '19

29 May '19

Hello chirp folk My first time using chirpw - not yet totally working yet. The mission was to program a Baofeg Radio ---------------------------------------------------------- Platform is Linux (Mint - Ubuntu based) chirpw does install OK in /usr/bin It also runs from $HOME/bin if I put a copy there. I check with "lsusb" to see that the USB device is seen OK, and all is well. 1. Firstly, I get a permissions refusal on attempting the communication. "An error has occurred [Errno 13] could not open port /dev/ttyS0" 2. If I run chirpw from a terminal, I get message: (process:5560): Gtk-WARNING **: 10:09:24.416: Locale not supported by C library. Using the fallback 'C' locale. Gtk-Message: 10:09:24.418: Failed to load module "atk-bridge" I check to see libatk-bridge2.0-0 is present - and all is well Also libatk-bridge2.0-dev is there I do not understand why the module is not loaded. The messages seem to come from a process that is named like a LAN network address which keeps changing except for the first number "10". It might some GTK process -------------------------------------------------------------- Have I done something catastrophic? Maybe missed out something essential? Thanks if you can help My regards all

2 2

Re: [chirp_users] Truth or Fiction Kenwood radios
by Gary Craig 28 May '19

28 May '19

Pavel, Thanks for the info on the Kenwood TK series. I was given a TK-762HG and saw it was supported in Chirp. Looking forward to programming it. Is the hack for the 12 channels included in the driver? Mine has 8. Be blessed! May 2019 be our year of change & growth! Gary Craig KI5CCD Maintenance Webco Industries Texas Distribution 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext. 107 Fax 918-246-7045 gcraig(a)webcotube.com -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Pavel Milanes Costa Sent: Tuesday, May 28, 2019 8:36 AM To: chirp_users(a)intrepid.danplanet.com Subject: Re: [chirp_users] Truth or Fiction This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious El 24/5/19 a las 18:27, John Kemker escribió: > I find it hard to believe that they don't have as good a software > standard as less-expensive brands. I was not eager to take a side here, but... I'm developing a driver (CHIRP) for an old Yaesu/Vertex Radio family right now (FTL 1011/2011/7011) and there a BUG in the firmware, they DON'T Validate the radio info once I pass to the program space... I can program a 2011 like if a 7011 and vice versa... there is an old hack to convert any of them from 4 to 8 to 12 channels on SOFTWARE, etc.. "less-expensive brands?" I developed the driver for Commercial Grade Kenwood TK-x60/x70 & TK-x60G/x70G families (for CHIRP) and there is a lack of validation out there in the same aspect... In fact for YEARS fleet/ham operators knows that ANY of the in that familly can be programed like a x78 and you will get features that ONLY that radio has... yes I can program a TK-760G and get all the features of a TK-768G (A key for low power, true reverse, etc...) and the radios are happy with that... [The OEM software HIDE the key features for particular radios but the functions are there, I have given ACCESS to that functions in CHIRP, once you know that all of them uses the same firmware, literally: the same firmware...] The TK-790 is another monster [never completed the driver for it...], better programmed, locks on the important things, a separate mode for firmware, but has a quirk or two also... As many of the previous OM said: Fast, Reliable, Cheap; pick just two of them. Cheers, Pavel CO7WT. _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Gary at gcraig(a)webcotube.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

Re: [chirp_users] Truth or Fiction
by JOCK SOUTAR 28 May '19

28 May '19

Never bricked any of mine. Could it be the operator rather than the radio? On Tuesday, May 21, 2019 Dennis Wage <chirp_users(a)intrepid.danplanet.com> wrote: Chirp has bricked Yeasu radios? I know what I think. What's the real truth? Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

15 26

[chirp_users] Truth or Fiction
by Dennis Wage 28 May '19

28 May '19

Chirp has bricked Yeasu radios? I know what I think. What's the real truth? Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net

5 5

Re: [chirp_users] Truth or Fiction
by Dave B 26 May '19

26 May '19

On 25/05/2019 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: <Snipped> > They say they've seen bricked radios caused by CHIRP.? Said it's > because CHIRP wrote to areas they're not supposed to write to.? Said > that RT Systems "works with Yaesu" and that's why they support RT > Systems.? *Who would write the internal software for a radio where the > programming software could brick it?* ------------------------------------------------------------------------ Hi. Probably so they can load/update the entire firmware via the programming port during production with minimal effort on their part. However... Any "Sensible" designer would have put procedures in place in the final "User Release" firmware (as opposed to Production Test firmware) so that someone has to put the radio in a firmware load mode, perhaps like some other gadgets, by holding particular keys while it is powered up. Otherwise, leave it able to have memory data pulled and pushed, but other areas protected, perhaps flagging a warning on any display, of beeping, if anything tries to push data where it's not supposed to go, but otherwise ignoring it. But, these are products built down to a price, software/firmware development is expensive in time, and time costs money, due to the team of people involved. Plus, they are probably working on a host of other products too, so rightly or wrongly, only the bare minimum is done to meet the project's specified needs, and that's all. At the expense of "sanitisation" code for any remote memory read/write functions over any I/O port. Remember, just one bit flipped in the wrong place could cause mayhem or utterly brick a product. Or cause no issue, if the internal code does not use that location. But, a later updated firmware might use that location for something critical! The RT systems people have probably paid Yaesu for the needed information to do it the right way, or even purchased a software library from them, so they are understandably trying to protect their investment, in this case by (allegedly) perhaps spreading untruths about competing software. It's sadly not uncommon in the professional/industrial world too. Regarding CHIRP. It's good, very good. But by the nature of things that are built as a result of reverse engineering someone else's protocol without sight of any makers documentation, mistakes can be made, or features/methods that are default if not touched are fine on one product, but on another outwardly similar product, is the wrong way to do things. Heck, in my life where I've created code for products and customers, where documentation DOES exist, there are often errors and omission in the doc's that turn out to be a tripping point! And that's for products that cost many times more than any Ikensu radio! Reverse engineering is not trivial either, lots of testing is needed, with access to examples of (in this case) the particular make/model of radio in question, and known working software (all at a cost.) All that takes time, LOTS of time, plus at a guess, I expect the developers working on this are volunteers who as such are unpaid and have lives to get on with too. I have to say, they do a great job all things considered. I myself have a HH radio I'd like to use with CHIRP (A Puxing PX-2R) that CHIRP doesn't understand correctly, at this time. A Bug has been filed, with log files etc (January this year.) But I'm not expecting a rapid fix as other issues affect a lot more people. I have the hardware, some Python knowledge, but I'm not up at the level needed to do much with it, sadly. I also don't get enough of "the right sort of contiguous time" to dive in, learn, and have a go myself, but I might re-visit the code, and see if I can learn what's going on, or not. But as always, that takes time, and I have many many other things I need to be doing in the domestic and work world too. Regards to All. Dave B G0WBX -- Created on and sent from a Unix like PC running and using free and open source software:

1 0

Re: [chirp_users] Homebrew formula and daily builds
by Dave B 24 May '19

24 May '19

Date: Thu, 23 May 2019 14:26:58 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> Subject: Re: [chirp_users] Homebrew formula and daily builds To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Brian McCaffrey <brian(a)w1bp.net> Message-ID: <693315801.787648.1558636018565(a)email.ionos.com> Content-Type: text/plain; charset=UTF-8 For those Linux users who feel neglected, you can install Homebrew with: sh -c "$(curl -fsSL https://raw.githubusercontent.com/Linuxbrew/install/master/install.sh)" ------------------------------------------------------------------------ No thank you! I've seen what that can do, and anyway, that fails miserably if Ruby is not installed. #!/bin/sh set -e umask 022 if test -n "$HOMEBREW_FORCE_VENDOR_RUBY" || ! command -v ruby >/dev/null; then eval "`curl -fsSL https://raw.githubusercontent.com/Linuxbrew/install/master/install-ruby`" fi exec ruby -e "`curl -fsSL https://raw.githubusercontent.com/Linuxbrew/install/master/install`" "$@" (I've removed what it put there, cleaned and sterilised the brewery!) Mac's are an odd case, as they are curated by Apple, who vehemently do not want anyone "polluting" the system with unknown software. However, as we all know, there are ways... Best stick to the instructions on the chirp website I think. 73. Dave G0WBX. -- Created on and sent from a Unix like PC running and using free and open source software. ::

1 0