- Users - lists.chirpmyradio.com

[chirp_users] TYT TH-UV3R - Channels not available after Upload to Radio
by djdman 2k 10 Jun '20

10 Jun '20

Filed a bug with details @ https://chirp.danplanet.com/issues/7969. Any suggestions would be most appreciated! Cheers, Tom

1 0

[chirp_users] CRT Micron Frequency Issue
by Paul G7BHE 09 Jun '20

09 Jun '20

Hi everyone I have just bought an expanded CRT Micron UV. It has frequency coverage of 136-174 and 400-490. CHIRP is not allowing me to enter frequencies outside of 144-146 & 430-440. Has anyone else encountered this? Is it a CHIRP issue perhaps? I am able to enter the frequencies manually onto the radio and using the OEM software. But frankly that is a really bad program. Thanks Paul G7BHE Sent from my iPhone

4 4

[chirp_users] (no subject)
by Tommy Long 08 Jun '20

08 Jun '20

I like to know if you can copy and paste from something to the radio ?

3 2

[chirp_users] CHMOD ...
by Peter 08 Jun '20

08 Jun '20

Hi all: I am not sure who came up with the brilliant tip of chmod 777 /dev/ttyUSB0 as I have deleted the email suggesting that. So THANK YOU for that suggestion. I was getting frustrated trying to get Chirp on Linux Mint 19.2 to up/download from my new (to me) Icom 2100H. All I got was error messages that the radio had responded inappropriately. Until I did the chmod thing. IT WORKED. So, thanks again. Now I can get going on the next step of a very long march. Peter, VE3BBN -- "There is nothing - absolutely nothing - half so much worth doing as messing about in boats" - Kenneth Grahame in “The Wind in the WIllows”

4 5

[chirp_users] Chirp Linux - Sorting frequencies
by Fernando Pompeo 08 Jun '20

08 Jun '20

2 1

Re: [chirp_users] chirp_users Digest, Vol 138, Issue 5
by Ken Auggie 05 Jun '20

05 Jun '20

> On Fri, Jun 5, 2020 at 12:14 PM Ken Auggie <kbauggie(a)gmail.com> wrote: >> >> CHIRP (as of daily-202000603) is having errors “cloning” a new Baofeng UV-82 High Power using a Baofeng USB cable (both purchased through Amazon). The errors occur on both a 2012 Mac Pro running Mojave 10.14.6 and 2012 MacBook Pro running Catalina 10.15.. >> >> On the Mac Pro, I always get the error “Radio did not respond”. I tried with the built-in driver as well as the driver on the FTDI Chip website (v2.4.2) but same error. >> >> On the MacBook Pro, CHIRP was able to initiate the cloning process but then error’ed out with “Radio refused to send second block” or something to that effect. I then installed the FTDI Chip v2.4.2 driver and now always get the “Radio did not respond” error. >> >> I booted the MacBook Pro to Windows 10, and without installing any drivers (I believe I already had appropriate FTDI drivers for my OBDII cable), CHIRP successfully cloned the UV-82 High Power, so this validates that both the Baofeng UV-82 High Power and the Baofeng USB cable are operating correctly. >> >> The Mac OS X tips have not provided any solution. >> >> So this comes down to, IMO, the CHIRP software. As there appears to be reports of success with using OS X CHIRP, I can only assume it’s specific to the UV-82 (the newer “High Power” version, which seems to be distinct to the original UV-82HP) and/or my 2012 Mac computers (doubtful its a problem with the computers are they are different hardware-wise and OS version-wise). >> >> Can anyone provide any insight, guidance, suggestions that may work for the hardware mentioned? > > Hi Ken, > > I have no issues here with my Baofeng UV-82HP on my MacBook Air > running macOS Catalina. I'm even using a programming cable with a > counterfeit Prolific USB-to-Serial chip. > > What I had to learn when I got my first UV-82 was that the metal pins > of the programming cable stick in the metal rings of the speaker/mic > socket. That "stiction" made me think that it was fully inserted when > in reality it still had a tiny way to go. It took a little wiggle and > a press to get it to snap in the rest of the way. Now that I am aware > that this can happen, I've mastered the technique of getting it fully > inserted the first time so it rarely happens any more. > > Jim KC9HI Thanks for the advice Jim. But I don’t believe this is connection issue for me since under OS X on my laptop, I booted to Windows without touching the cable nor reseating the connections, and CHIRP/Windows 10 worked just fine. Again, I believe this issue may be software related involving the “newer” Baofeng UV-82 High Power (which technically is not the same as the UV-82HP), but only on the OS X version of CHIRP (perhaps OS X driver-related as well).

1 0

[chirp_users] Ubuntu 20.04 chirp not found
by Ronald Scott Moody 05 Jun '20

05 Jun '20

Just added the repo to my Ubuntu MATE 20.04 install, updated apt, but when I run apt-get install chirp-daily I get Unable to locate package chirp-daily.

8 19

[chirp_users] Mac OS X (Mojave and Catalina) CHIRP, Baofeng UV-82 High Power and Baofeng USB cable
by Ken Auggie 05 Jun '20

05 Jun '20

CHIRP (as of daily-202000603) is having errors “cloning” a new Baofeng UV-82 High Power using a Baofeng USB cable (both purchased through Amazon). The errors occur on both a 2012 Mac Pro running Mojave 10.14.6 and 2012 MacBook Pro running Catalina 10.15.. On the Mac Pro, I always get the error “Radio did not respond”. I tried with the built-in driver as well as the driver on the FTDI Chip website (v2.4.2) but same error. On the MacBook Pro, CHIRP was able to initiate the cloning process but then error’ed out with “Radio refused to send second block” or something to that effect. I then installed the FTDI Chip v2.4.2 driver and now always get the “Radio did not respond” error. I booted the MacBook Pro to Windows 10, and without installing any drivers (I believe I already had appropriate FTDI drivers for my OBDII cable), CHIRP successfully cloned the UV-82 High Power, so this validates that both the Baofeng UV-82 High Power and the Baofeng USB cable are operating correctly. The Mac OS X tips have not provided any solution. So this comes down to, IMO, the CHIRP software. As there appears to be reports of success with using OS X CHIRP, I can only assume it’s specific to the UV-82 (the newer “High Power” version, which seems to be distinct to the original UV-82HP) and/or my 2012 Mac computers (doubtful its a problem with the computers are they are different hardware-wise and OS version-wise). Can anyone provide any insight, guidance, suggestions that may work for the hardware mentioned?

2 1

[chirp_users] Kenwood TH-F6 Upload
by Glenn K0LNY 04 Jun '20

04 Jun '20

Hi, I know that the Kenwood TH-F6 in Chirp is operating under "live mode", but I'm not sure of what that means in terms of programming it. I went throughout the settings, and put in my call sign and initials instead of the HELLO !! that was in there, and when I connected it to the Kenwood software, I saw that it was saved on the Kenwood, from the Chirp software. I tried importing a CSV file, and Chirp messes it up, and that is a CSV file that I used on Chirp with my Tyt and my Baofengs. By messing it up, it puts the entries in an odd order. I'm hoping for some advice on this, while using Chirp in Linux. Thanks Glenn

2 1

[chirp_users] Fw: No USB Port Error
by Glenn K0LNY 04 Jun '20

04 Jun '20

Well, I made a little progress with the USB problem, in Ubuntu. I installed a new live Ubuntu, on a thumb drive for a friend, and I installed Chirp for him, and plugged in my Kenwood and tried to download from radio, and first it did nothing. So I tried again, and I got the same error: error no 2 cannot find ttyUSB0 No such file or directory. And this was on a fresh install of Ubuntu 16.43 with updates installed. Just like on my other computer that had the same issue. So in doing a web search on the problem, I found a YouTube where the guy suggested using lsusb and he found the device in his case, on USB1. So I went to terminal and found the prolific on USB1 So then I found that in Chirp, it wasn't there before, I am fairly sure. So now I no longer get that error, but it still does not download from the radio, it just goes to the blank Chirp screen. Any ideas? Thanks in advance. Glenn ----- Original Message ----- From: "Glenn K0LNY" <glennervin(a)cableone.net> To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Sent: Friday, May 22, 2020 5:03 PM Subject: Re: [chirp_users] No USB Port Error Jim, I just checked to add ubuntu-mate to the dialout and it tells me that ubuntu-mate is already a member of dialout. So there is a problem with it finding usb0. Could it be that a different radio's cable might be using a serial assignment? I've used the Tytera cable via USB and Baofeng's cable via USB and it has always been recognized. Note, the cable I'm stuck with for now is a USB cable that should go with a digital radio, the Radioddity GD77-S, so I don't know if it has something different to the cable. I accidentally sent the Baofeng cable along with the GD77-S that I traded for the Kenwood. Glenn ----- Original Message ----- From: "Jim Unroe" <rock.unroe(a)gmail.com> To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Sent: Friday, May 22, 2020 12:51 PM Subject: Re: [chirp_users] No USB Port Error On Fri, May 22, 2020 at 1:06 PM Glenn K0LNY <glennervin(a)cableone.net> wrote: > > Hi, > I just got a new used radio, a Kenwood TH-F6. > So I plugged in the radio using a non-Kenwood cable and I went into > "radio" and download from radio and selected my radio model and USB0 and I > get the message: > error no 2 cannot open tty/usb0 error cannot locate tty/USB0. > or something similar. > I have used this cable and that Ubuntu with Chirp in the past for my other > radios, and other than different brands of radios, I have always been able > to do this. > I know a guy who has done this to this model using the Baofeng cable using > a different software in Windows, not the Kenwood software, but one that > they purchased. > I don't recall the name, but I think it starts with an R. > At any rate, I'd sooner buy a Kenwood cable than that other software and > keep using Chirp. > Hopefully I didn't get it mixed up with the Radioddity cable. > I thought I had the right cable with the Radioddity when I sent it off. > I don't know if they put the name of the associated radio on the cables, > since I'm Blind. > But any who, would this be an error for the wrong cable? > Thanks. > Glenn Hi Glenn, >From what you are describing it sounds like you Linux user doen't have permission to access the port. Either run CHIRP as root or as your Linus user to the dialout group. I also have a Kenwood TH-F6a. CHIRP programs it in "live" mode. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

9 32

[chirp_users] BF-F8TD confirmation with chirp
by Stefan Halvorsen 04 Jun '20

04 Jun '20

I ordered the kid from Amazon that included the TIDRADIO "version" of what I believe is the BF-F8HP because it's 8 watt high, 4watt medium, and 1 watt low.I can confirm that the cable in the kits labeled it had FTDI chip worked with chirp, and my Linux machine running Linux mint 19.3. I did have to run chmod command before chirp had access to the USB0. Without the command it says access denied in chirp when I try to clone from radio.I followed protocol of how to plug in and in what order and it was able to download from radio with no issue. Max volume on radio.Also, I was able to select BF-F8HP as the device and was able to set power levels for each freq in low/Med/high. I was able to successfully download program to radio. I have no way to measure transmit power to know if it's actually 8 watt or actually has 3 power levels, since I haven't gotten my license yet and am just listening while I study. I also have no device to measure.I have heard that some shady companies are marketing these radios as 3 power levels and 8 watts on high and some hacking firmware to show 3 levels but only transmitting 4 watt on medium and high. But it does seem legit.TIDRADIO told me this was their OEM version of the BF-F8HP. BF-F8HP seems to be the BTech oem version. But I wanted to confirm that, at least with my Linux distro Linux mint 19.3 and chmod command, I was able to download to chirp and select the BF-F8HP as the model to set 3 power levels on frequencies. I will try on my windows machine but the way I see it, if it works on my Linux machine then it'll easily work on windows.

3 2

[chirp_users] Connecting TTo The Kenwood TH-F6
by Glenn K0LNY 04 Jun '20

04 Jun '20

Hi All, I thought I'd try connecting the cable and radio to my windows computer with the Kenwood software. I was able to enable three different USB ports of the available 20 listed, without an error on selection. But on all of them, I get the error that the port timed out. In researching this on-line, one thing I found, that I don't know if it is right, is that someone said that in the Kenwood menus I need to switch the speaker out from speaker to data. I would think that if that is an option, that it would be the default option. Does anyone with a Kenwood know if this is the case in the menus? Since I cannot read the display, I can't look myself. I'm just trouble shooting before going back to the Chirp software. Glenn

2 8

[chirp_users] New Daily Build
by Build System 03 Jun '20

03 Jun '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20200603 A list of the changes included in this build (since the last daily) follows: Changes for Build #623 [Dan Smith <dsmith(a)danplanet.com>] Fix style issue in tmd710.py Related to #7467 [Rick DeWitt <aa0rd(a)yahoo.com>] [tmd710] New Clone-Mode driver for Kenwood TM-D710/GA/GE. Issue #7467 Implements true clone mode using PROG MCP binary image. [Jim Unroe <rock.unroe(a)gmail.com>] [QB25] Add MCU Version for Radioddity QB25 This patch adds an additional MCU version to support the Radioddity QB25 quad-band mobile radio. fixes #7915 [Joe Milbourn <joe(a)milbourn.org.uk>] [AnyTone778] Adding support for the Retevis RT95, the CRT Micron UV, and the Midland DBR2500. Closes #6787 - Midland DBR2500, #6425 - Retevis RT95, and #7887 - CRT Micron UV. Creates the AnyTone778UVBase class, and sub-classes it for each new radio. Radio frequency ranges are hard-coded to 144-148MHz and 430-450MHz at the moment, though we know the radio can support more if configured correctly. Radio supports 12.5kHz, 20kHz, and 25kHz channel widths, mapped to NFM, FM, and FM respectively in chirp on import, and written back as 12.5kHz and 25kHz.

1 0

[chirp_users] Baofeng BF-F8TD (3 power levels)
by Stefan Halvorsen 02 Jun '20

02 Jun '20

Hello,I just received this radio and it's a collab version of the BF-F8HP between baofeng and TIDRADIO. My question is, when programming it, do I select the BF-F8HP so I can program low, medium, and hi or will I have to choose UV5R since the exact model isn't listed in the list? If uv5r will I be able to program all 3 power levels?Thanks :-)

4 3

[chirp_users] Programming The Kenwood TH-F6 for 11 meter RX
by Glenn K0LNY 01 Jun '20

01 Jun '20

Hi All, I've been chomping at the bit waiting for my cable for programming this radio, looks like it will come today. As some of you know, this radio can RX most all frequencies. So I was planning on putting in the 11-meter channels, as I have a list of all their frequencies. I'm wondering about programming the SSB for 11-meter, both LSB and USB. My question is, when putting in the frequencies into Chirp, do I just enter LSB or USB instead of AM in the band field with all the same frequencies as I used in AM? Or would I just switch bands on the radio while on a particular channel? Thanks. Glenn

1 0

[chirp_users] Are Baofeng leads TTL?
by Phil 01 Jun '20

01 Jun '20

I have a project in mind that needs a USB interface lead and since I have several Baofeng programming leads I thought I might cut the radio end off and be left with a TTL compatible lead. Is that the way these leads work or are they specific to the Baofeng radio? -- Regards, Phil

3 3

Re: [chirp_users] Repeater listings
by Richard Gordon 29 May '20

29 May '20

The license is buried in the .deb file. It is GPL2. The app is written in Python and the source is also in the .deb. Rich Gordon k0eb

1 0

[chirp_users] Repeater listings
by Luke Bryan 29 May '20

29 May '20

Greetings all, I am glad for all the work you do for an open-source radio app! I maintain the repeater database at hearham.live and wonder what the process is to list a repeater source in Chirp? Unlike other repeater books, the full database is accessible in a readily readable format. Even the app is open source. https://hearham.com/repeaters Additionally I hope for this repeater listing to be unlike other repeater books in that it is newer, does not have old old repeaters that were there once years ago, after all the time you take to plug them in... they are not actually there :( Hope you find it useful! Have a great week Luke

7 9

[chirp_users] Programming The Kenwood TH-F6
by Glenn K0LNY 28 May '20

28 May '20

Hi, I'm hoping my new programming cable comes today so I can program my Kenwood TH-F6 hand-held. So I know that it has over 400 memory slots, and it can RX all the HF frequencies. So I'm wondering how it works while in Chirp, so I can plan my CSV file. Since I'm Blind and cannot read the display, I may have questions that might otherwise seem obvious to you. 1: Does it have a channel 0, or do they start with 1? 2: I read of banks of memories in groups of 50 for different bands. Is this have to be kept to, or is it just a convenience? In my Baofeng's CSV file, they are intermixed. 3: Can anyone recommend some common HF frequencies that I can program into it? Thanks.

2 4

[chirp_users] Programming Arcshell-5
by Jonathan Pierce 26 May '20

26 May '20

Best wishes from a Noob, I am a FireWise neighborhood council member in a rural, high-risk forested area (70 miles from the Paradise Fire) of northern California. Several neighbors and I want to set up a backup evacuation radio notification system for our neighborhood in the event that power (lose cable internet and VOIP phone service) and cell towers are down (the local tower burnt last year during an event). And we have spotty cell coverage at best. We found the best-seller Arcshells on Amazon are powerful and reach through our hilly neighborhood OK. But I understand that 1. The devices are not FCC approved; 2. Antennae is removable; 3. Stock programming is a mix of FRS and GMRS frequencies. Fire chief has given go ahead for us to use them if we don’t interfere with any of the EMS, police, and fire frequencies. The stock frequencies programmed in the Arcshell AR-5 are indeed different than all the official ones used. But some neighbors want the radios reprogrammed so they are strictly only using FRS frequencies. I’ve been able to query and download the memory from an arcshell, and I believe I have figured out how to save a modified memory profile to a file so that it could uploaded to all units. Questions: 1. Using the chirp edit function can I just go ahead and change all channels’ frequencies to strictly FRS permitted ones? 2. Do I need to change any of the other settings like Tone Mode, Tonesql, DTCS Code, etc, or can they just remain as is? Thanks for your knowledgeable help! Jonathan

12 15

Re: [chirp_users] Baofeng T-57 (Jim Unroe)
by Michael E. Jaggers 26 May '20

26 May '20

I can't argue that. I can only report what I see. One version works, one version doesn't. What changed that would affect this? Mike, WB4TTZ On May 25, 2020 07:52, Jim Unroe <rock.unroe(a)gmail.com> wrote: > > On Sun, May 24, 2020 at 6:49 PM Michael E. Jaggers <mej(a)mindspring.com> wrote: > > > > More: > > > > I went back to my saved images, and I had notated that I was using the UV-82WP drivers to read the UV-XP. That no longer works on the latest version of CHIRP. The version that I have installed on my programming laptop is 20200227. That still works. > > > > Something has changed in the driver. > > > > Mike, WB4TTZ > > > > The last change to the driver was December 30, 2019 to add support for > the UV-9R. > > Jim KC9HI > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Michael Jaggers at mej(a)mindspring.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

Re: [chirp_users] CHIRP Doesn't Work
by Clint Bradford 25 May '20

25 May '20

>> … Just to be clear, I have tried every Baofeng model currently listed in CHIRP and can't get it to work. Yet thousands are successfully using CHIRP daily … After reading the extensive FAQ and Wiki Help information, most “problems” are solved. Clint Bradford

5 4

Re: [chirp_users] Baofeng T-57 (Jim Unroe)
by Michael E. Jaggers 25 May '20

25 May '20

More: I went back to my saved images, and I had notated that I was using the UV-82WP drivers to read the UV-XP. That no longer works on the latest version of CHIRP. The version that I have installed on my programming laptop is 20200227. That still works. Something has changed in the driver. Mike, WB4TTZ -----Original Message----- >From: "Michael E. Jaggers" <mej(a)mindspring.com> >Sent: May 24, 2020 7:46 AM >To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> >Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > >The case looks like my UV-XR, but that does not mean anything. > >Mike, WB4TTZ > >-----Original Message----- >>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> >>Sent: May 23, 2020 7:26 PM >>To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Richard Setford <rich(a)setford.net> >>Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) >> >>A T-57 is a UV-9R? >> >>> On 23 May 2020 at 20:19 Richard Setford <rich(a)setford.net> wrote: >>> >>> >>> Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no >>> avail. The predominant error message I get reads: >>> >>> Error reading data from radio: not the amount of data we want >>> >>> Does that help? >>> >>> Rich >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >>> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >> >>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 >>Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net >>_______________________________________________ >>chirp_users mailing list >>chirp_users(a)intrepid.danplanet.com >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>This message was sent to Michael Jaggers at mej(a)mindspring.com >>To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >_______________________________________________ >chirp_users mailing list >chirp_users(a)intrepid.danplanet.com >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Michael Jaggers at mej(a)mindspring.com >To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

Re: [chirp_users] Baofeng T-57 (Jim Unroe) (Michael E. Jaggers) (Nigel A. Gunn G8IFF/W8IFF)
by Richard Setford 25 May '20

25 May '20

To Nigel and Michael, Just to be clear, I have tried every Baofeng model currently listed in CHIRP and can't get it to work. Rich > Message: 1 > Date: Sun, 24 May 2020 01:19:30 +0100 > From: Richard Setford <rich(a)setford.net> > Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <d3910b03-7e8f-814c-8cfe-d1f226b126b7(a)setford.net> > Content-Type: text/plain; charset=utf-8; format=flowed > > Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no > avail. The predominant error message I get reads: > > Error reading data from radio: not the amount of data we want > > Does that help? > > Rich > > > > > ------------------------------ > > Message: 2 > Date: Sat, 23 May 2020 20:26:26 -0400 (EDT) > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Richard > Setford <rich(a)setford.net> > Message-ID: <370817437.223253.1590279986478(a)email.ionos.com> > Content-Type: text/plain; charset=UTF-8 > > A T-57 is a UV-9R? > >> On 23 May 2020 at 20:19 Richard Setford <rich(a)setford.net> wrote: >> >> >> Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no >> avail. The predominant error message I get reads: >> >> Error reading data from radio: not the amount of data we want >> >> Does that help? >> >> Rich >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com > Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www > http://www.ngunn.net > > > ------------------------------ > > Message: 3 > Date: Sun, 24 May 2020 07:46:37 -0500 (GMT-05:00) > From: "Michael E. Jaggers" <mej(a)mindspring.com> > Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <707217450.586.1590324398402(a)wamui-mouse.atl.sa.earthlink.net> > Content-Type: text/plain; charset=UTF-8 > > The case looks like my UV-XR, but that does not mean anything. > > Mike, WB4TTZ > > -----Original Message----- >> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> >> Sent: May 23, 2020 7:26 PM >> To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Richard >> Setford <rich(a)setford.net> >> Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) >> >> A T-57 is a UV-9R? >> >>> On 23 May 2020 at 20:19 Richard Setford <rich(a)setford.net> wrote: >>> >>> >>> Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no >>> avail. The predominant error message I get reads: >>> >>> Error reading data from radio: not the amount of data we want >>> >>> Does that help? >>> >>> Rich >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 >> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net >> www http://www.ngunn.net >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Michael Jaggers at mej(a)mindspring.com >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > End of chirp_users Digest, Vol 137, Issue 20 > ********************************************

1 0

[chirp_users] Installing On A Mac
by Glenn K0LNY 25 May '20

25 May '20

Hi, A Blind user would like to try chirp, and I'll paste below what they said the computer stated: Cqnnot verify this as my Mac says Chirp is unsigned and will not let me run the app. Is there another method of doing this? Thanks. Glenn

2 1

Re: [chirp_users] Baofeng T-57 (Jim Unroe)
by Michael E. Jaggers 24 May '20

24 May '20

The case looks like my UV-XR, but that does not mean anything. Mike, WB4TTZ -----Original Message----- >From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> >Sent: May 23, 2020 7:26 PM >To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Richard Setford <rich(a)setford.net> >Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > >A T-57 is a UV-9R? > >> On 23 May 2020 at 20:19 Richard Setford <rich(a)setford.net> wrote: >> >> >> Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no >> avail. The predominant error message I get reads: >> >> Error reading data from radio: not the amount of data we want >> >> Does that help? >> >> Rich >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > >Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 >Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net >_______________________________________________ >chirp_users mailing list >chirp_users(a)intrepid.danplanet.com >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Michael Jaggers at mej(a)mindspring.com >To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

Re: [chirp_users] Baofeng T-57 (Jim Unroe)
by Richard Setford 24 May '20

24 May '20

Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no avail. The predominant error message I get reads: Error reading data from radio: not the amount of data we want Does that help? Rich

2 1

[chirp_users] No USB Port Error
by Glenn K0LNY 23 May '20

23 May '20

Hi, I just got a new used radio, a Kenwood TH-F6. So I plugged in the radio using a non-Kenwood cable and I went into "radio" and download from radio and selected my radio model and USB0 and I get the message: error no 2 cannot open tty/usb0 error cannot locate tty/USB0. or something similar. I have used this cable and that Ubuntu with Chirp in the past for my other radios, and other than different brands of radios, I have always been able to do this. I know a guy who has done this to this model using the Baofeng cable using a different software in Windows, not the Kenwood software, but one that they purchased. I don't recall the name, but I think it starts with an R. At any rate, I'd sooner buy a Kenwood cable than that other software and keep using Chirp. Hopefully I didn't get it mixed up with the Radioddity cable. I thought I had the right cable with the Radioddity when I sent it off. I don't know if they put the name of the associated radio on the cables, since I'm Blind. But any who, would this be an error for the wrong cable? Thanks. Glenn

4 7

Re: [chirp_users] chirp_users Digest, Vol 137, Issue 18
by tommy 22 May '20

22 May '20

4 3

[chirp_users] New Daily Build
by Build System 21 May '20

21 May '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20200521 A list of the changes included in this build (since the last daily) follows: Changes for Build #622 [Jaroslav Škarvada <jskarvad(a)redhat.com>] Add support for IC-E90/IC-T90 Fixes #579 [Joe Milbourn <joe(a)milbourn.org.uk>] [AnyTone778] Initial, read and write, support for AnyTone 778UV, partially closes #4901 Probably also supports similar looking things, like the retevis RT95. Supports frequency, offset, name, power, duplex, CTCSS, and DTCS. Doesn't support any settings.

1 0

Re: [chirp_users] chirp_users Digest, Vol 137, Issue 16
by Dave B 21 May '20

21 May '20

I think you need to visit the main Chirp website, and get the PPA details, then add that to your system. https://launchpad.net/~dansmith/+archive/ubuntu/chirp-snapshots Chirp Daily, is not distributed by Ubuntu, but by their own PPA. 73. Dave G0WBX. On 20/05/2020 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > Subject: [chirp_users] Ubuntu FF with PPA: Unable to locate package > chirp-daily? -- Created on and sent from a Unix like PC running and using free and open source software:

3 2

[chirp_users] Pyenv and CHIRP
by D.J.J. Ring, Jr. 20 May '20

20 May '20

Hi CHIRPers, I was going to submit something about pyenv separately but I mentioned it in a post about Ubuntu current. The application pyenv which allows using specific versions with certain programs. I'm trying to get that very program working to allow me to use python 3.7 on a distro SLINT (Slackware) that only has python 2.7. I've gotten pyenv working nicely, but I'm having problems installing slpkg a new unofficial package installer. Haven't mastered yet, but I'm stubborn. I'm sure the devs know other means to keep CHIRP working but I just heard of this, it gives a particular program the python environment it needs and a shortcut with environmental settings can be put in ,profile file. 73 David N1EA

1 0

[chirp_users] Baofeng T-57
by Richard Setford 20 May '20

20 May '20

Hi, I'm running Linux Mint 19.10 with CHIRP daily-20200516 and it would appear that my Baofeng T-57 isn't supported by CHIRP. Can this radio be added please or is there a workaround? Thanks, Rich

2 1

[chirp_users] Using Python 2 and Python 3 in Linux
by D.J.J. Ring, Jr. 18 May '20

18 May '20

Various versions of Python can be used in Linux. These instructions were for Slackware, but I suppose they work well in other distributions. Install pyenv as root: 1. cd /root 2. curl -L https://github.com/pyenv/pyenv-installer/raw/master/bin/pyenv-installer | bash update your .bashrc (or create it if not exists) and add this: export PATH="$HOME/.pyenv/bin:$PATH" eval "$(pyenv init -)" eval "$(pyenv virtualenv-init -)" load the new .bashrc with source .bashrc now install the python version that you want like: pyenv install 3.7.2 (you can have multiple versions installed at the same time) (you can check for the available versions with: pyenv install --list) Switch to the new version with: pyenv global 3.7.2 and run slpkg. When you finish with it you can switch back to your original python with: pyenv global system And finaly check for the available python versions in your system with: pyenv versions (the first 'system' means the python that is installed by your system) For example this is from mine: root@lab:~# pyenv versions system 3.1.2 3.5.5 * 3.7.2 (set by /root/.pyenv/version) References: https://github.com/pyenv/pyenv It seems that pyenv only reports the python versions installed into it. My system python is: Python 2.7.17 73 David N1EA

1 0

[chirp_users] New Daily Build
by Build System 16 May '20

16 May '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20200516 A list of the changes included in this build (since the last daily) follows: Changes for Build #621 [Jim Unroe <rock.unroe(a)gmail.com>] [PX-777] Update Tuning Steps List for Puxing PX-777 This patch updates rf.valid_tuning_steps for the Puxing PX-777 to include 6.25 KHz and 12.5 KHz. #7849

1 0

Re: [chirp_users] chirp_users Digest, Vol 137, Issue 13
by Gary Nobody 16 May '20

16 May '20

adding frequencies with chirp ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: Friday, May 15, 2020 2:00 PM To: chirp_users(a)intrepid.danplanet.com <chirp_users(a)intrepid.danplanet.com> Subject: chirp_users Digest, Vol 137, Issue 13 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: chirp_users Digest, Vol 137, Issue 12 (IT1 Stuart Blake Tener, USNR) 2. Re: Yaesu FT-8500 (W Paul Mills) 3. Re: Yaesu FT-8500 (Nigel A. Gunn G8IFF/W8IFF) 4. Re: Yaesu FT-8500 (Nigel A. Gunn G8IFF/W8IFF) ---------------------------------------------------------------------- Message: 1 Date: Thu, 14 May 2020 15:31:13 -0400 From: "IT1 Stuart Blake Tener, USNR" <stuart.tener(a)bh90210.net> Subject: Re: [chirp_users] chirp_users Digest, Vol 137, Issue 12 To: chirp_users(a)intrepid.danplanet.com Message-ID: <20200514153113.Horde.-Zn2TpRTN4d2IcjKv7IKjge(a)mgtmail.com> Content-Type: text/plain; charset="utf-8" Nolan, Indeed you might be thinking that you are reminding people of some obvious piece of wisdom to conduct a search for old articles, but indeed this is a fools errand (unless you are suggesting such messages were very recent in the last 30 to 45 days, which I did not get the impression you were). Why you ask? Python is still under heavy development and unless these older messages specifically substantiate what the exact version of Python existed at the time the messages were written and what specific Python version they were referring to, their content and meaning may be entirely inapplicable now as perhaps the technical concerns at issue at the time may well have been overcome my changes to the Python language or been amended in the current instantiation of the Chirp source code base. In either event, we would not gain such insights from old messages. Thus, obviously asking what the issues are now is a very different question from "what were the issues then?", a question I did not ask and therefore had no need to research the answer for. Secondly, you can't agree with me that "Python 3 would be nice to have", because I did not say that. I meant to assert in the most compelling manner that I could articulate that the idea of moving to Python3 is an imperative and to not do so terribly disadvantages users and retards the security of a system they are expected to continue to keep Python2 running upon. Let me clear here, I appreciate all the hard work that Dan, et alia, have put into Chirp and mean in no way to diminish the excellence of that work or to suggest any lack of appreciation. Moreover, if the argument is "We can't move to Python2 because its a part time project and nobody has time." I understand and accept that fully. However, that in no way changes the fact that distributing software in a now virtually unsupported language instigates a very high risk for the users of that software in such a case. Moving to Python3 is something that must happen, just as many programs written for Amateur Radio are no longer used because they ran on TRS-80s and Apple IIs, and we don't use that technology anymore. Chirp will eventually move in such a direction if it is not ported to Python3 soon (or some other secure language) as people that care about the security posture of their systems will be loath to remain to keep an environment running that is not longer be actively patched with security patches and having bugs remediated there within. 73, Stuart, N3GWG ?

1 0

[chirp_users] Yaesu FT-8500
by Claes Harde 15 May '20

15 May '20

Hello, I don’t see my radio listed. Is there another “close enough” that I could use? Thanks, Max

3 3

Re: [chirp_users] chirp_users Digest, Vol 137, Issue 12
by IT1 Stuart Blake Tener, USNR 14 May '20

14 May '20

Nolan, Indeed you might be thinking that you are reminding people of some obvious piece of wisdom to conduct a search for old articles, but indeed this is a fools errand (unless you are suggesting such messages were very recent in the last 30 to 45 days, which I did not get the impression you were). Why you ask? Python is still under heavy development and unless these older messages specifically substantiate what the exact version of Python existed at the time the messages were written and what specific Python version they were referring to, their content and meaning may be entirely inapplicable now as perhaps the technical concerns at issue at the time may well have been overcome my changes to the Python language or been amended in the current instantiation of the Chirp source code base. In either event, we would not gain such insights from old messages. Thus, obviously asking what the issues are now is a very different question from "what were the issues then?", a question I did not ask and therefore had no need to research the answer for. Secondly, you can't agree with me that "Python 3 would be nice to have", because I did not say that. I meant to assert in the most compelling manner that I could articulate that the idea of moving to Python3 is an imperative and to not do so terribly disadvantages users and retards the security of a system they are expected to continue to keep Python2 running upon. Let me clear here, I appreciate all the hard work that Dan, et alia, have put into Chirp and mean in no way to diminish the excellence of that work or to suggest any lack of appreciation. Moreover, if the argument is "We can't move to Python2 because its a part time project and nobody has time." I understand and accept that fully. However, that in no way changes the fact that distributing software in a now virtually unsupported language instigates a very high risk for the users of that software in such a case. Moving to Python3 is something that must happen, just as many programs written for Amateur Radio are no longer used because they ran on TRS-80s and Apple IIs, and we don't use that technology anymore. Chirp will eventually move in such a direction if it is not ported to Python3 soon (or some other secure language) as people that care about the security posture of their systems will be loath to remain to keep an environment running that is not longer be actively patched with security patches and having bugs remediated there within. 73, Stuart, N3GWG

1 0

[chirp_users] Upload stalls with Mac OS10.14 Mojave
by glenmac 14 May '20

14 May '20

I posted this last month and tried some new things. but, still stuck. Previously, used a 2018 15 inch MacBook Pro with OS10.14.6 (Mojave) that required a Kensington USB-C dock for the IOGear USB-Serial adapter. Uploading to an iCom 2200H stalled, forcing a reboot to get Chirp running again. Resurrected a mid-2012 MBP with Mojave, this one has 'real' USB ports, eliminating the Kensington dock. Installed the IOGear driver and KK7DS Python runtime. About Chirp: Chirp daily-20200430, GTK 2.24.32, PYGTK 2.24, Python 2.27,10. Kextstat: com.ATEN.driver.PL2303 (1.6.0) Download from Radio: dev/cu.UC-232AC/iCom/IC-2200H Still stalls when I immediately attempt to upload back to the 2200H, which displays “CL IN”. Force Quit on Chirp leaves it unable to re-open until I reboot. the IOGear driver and convertor worked under Win 7 with the iCom software. Any suggestions? Other recommended USB-serial converters? TIA, Glen KE7HIM

1 0

[chirp_users] chirp flatpak (In need of a few brave souls)
by Richard Shaw 14 May '20

14 May '20

Well thanks to the help and pointers here I was able to navigate the truly atrocious documentation for flatpaks and was able to create a bundle. I need a few brave souls to test: https://hobbes1069.fedorapeople.org/chirp-20200430.flatpak I put the version in the name, so be careful, if I update it it, you could install more than one version. I still have yet to learn how you update flatpak packages. I went through and did a "cleanup" of a lot of files we don't actually need. The original version was ~140MB... It should be practical to get it listed on flathub. The archives are called "daily" but really it's whenever something significant has been committed and the date is the version. Let me know if it works fine or needs some fixes. Thanks, Richard KF5OIM

7 15

Re: [chirp_users] Using Chirp On A Mac
by IT1 Stuart Blake Tener, USNR 13 May '20

13 May '20

Tycen, You state: "You can use Chirp on Mac if you are pre-Catalina (due to python2/python3)." I am very confused by the comments you make here regarding the usage of Chirp within a macOS environment that is based on Catalina. I just upgraded to Catalina and would wonder why Chirp is not capable of running there? I am dumbfounded by what you could possibly be implying by this (that no steps have been taken to migrate Chirp to Python3). Python2's deprecation was enunciated in 2008 and scheduled for 2015, it is 2020 now and we are just getting to it being taken out of service. I am not familiar with Chirp's internal programming constraints, but I cannot even begin to imagine that over all these years the forthcoming end of support for Python2 was outright ignored by Dan. I've met Dan several times, he is an extremely bright individual, what you are implying makes absolutely no sense. If this is true, then within one year Mac users will done with Chirp since by then (for security reasons) we will have all upgraded to Catalina. Moreover, Brew does provide Python2 I believe (granted, I will not run it after this year, also for security reasons absent future updates). But, can you please disambiguate as to what you mean by "due to Python2/Python3"? 73, Stuart, N3GWG Very Respectfully, Stuart B. Tener Computer Scientist / FCC Licensed Radio Operator -- IT1 Stuart Blake Tener, USNR, N3GWG (Extra), MROP Las Vegas, NV / Philadelphia, PA / Beverly Hills, CA (310) 358-0202 Mobile Phone (215) 338-6005 Google Voice

2 1

[chirp_users] Using Chirp On A Mac
by Glenn K0LNY 13 May '20

13 May '20

Hi, Someone just asked me about using Chirp on a Mac, and if it can be used in the Mac CLI. Thanks. Glenn

2 1

[chirp_users] Using Chirp to program the Yaesu FT-50r
by Richard K Parrish 13 May '20

13 May '20

Trying to Program a Yaesu FT-50r. I follow the instructions to hold the mon key and press the PTT 3 times. Unit goes into Clone mode, Send, then gets a CERR Any suggestions? Richard K. Parrish, NREMT-P, PC Course Administrator, Woodstock FD, Com 5 35 Park Drive Woodstock, NY 12498 845-679-6504 Ritchkp(a)gmail.com

3 6

[chirp_users] How to read Kenwood TH-D7?
by Ernesto Xload 12 May '20

12 May '20

Hello, How can I read Kenwood my TH-D7 fron CHIRP? Best regards

2 3

Re: [chirp_users] Using Chirp to program the Yaesu FT-50r
by Richard Gordon 12 May '20

12 May '20

I have an FT-50R and I am using the latest CHIRP release, CHIRP daily-20200430. There is no need to press the PTT 3 times. The instructions for the FT-50R are to hold the PTT and Knob while powering on the radio. (The knob is on the top of the radio and must be pressed down.) To clarify, press the PTT and the knob and then press the orange power button. All three must be pressed at the same time. The radio's display will read 'CLON'. From CHIRP select 'Radio' and 'Download from Radio' and then your port, 'Yaesu' and 'FT-50'. Click OK. The instructions will pop-up if enabled. Click OK. Once CHIRP's cloning dialog for the FT-50R is present on the screen, press the PTT once and the radio should clone. I hope this helps. Rich Gordon k0eb

2 1

[chirp_users] CHIRP issue with OS X Catalina
by Jean-Paul Louis 10 May '20

10 May '20

Hello all Catalina users, Has anyone found why CHIRP now refuse to read the Desktop? I always had my CHIRP files in a folder in the Desktop since I got the MacBook, Circa 2014. But since OS X Catalina, I get an error popup telling me that CHIRP cannot read the Desktop and folders below. It seems to be true for almost anywhere but my Home directory. but this does not seems to be a safe practice as Desktop is a folder in the home directory. It is the same with the folder “Documents”. Is that a normal CHIRP behavior? The only way I could make it works is to move the CHIRP folder from the Desktop to the Home directory. Why the CHIRP folder cannot be in the Desktop or in Documents? I am at a loss here. Jean-Paul N1JPL

2 1

[chirp_users] Grumpy old man.
by Dennis Wage 09 May '20

09 May '20

I humbly wish and believe all posts about installing chirp on anything besides windows and Mac OS should start their own list. I will unsubscribe soon if I see many more posts about installing chirp on Linux. If you try to use any distro of linux as your OS of choice you better be savvy enough, like my son Chris, to solve these issues on your own. GET OFF MY LAWN!!! -- Dennis M. Wage (iPhone) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net

15 24

Re: [chirp_users] Grumpy old man.
by John Schubert 09 May '20

09 May '20

On 5/8/20 12:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > Date: Fri, 8 May 2020 09:19:10 -0500 > From: Dennis Wage<dwage(a)dwage.com> > Subject: [chirp_users] Grumpy old man. > To: Discussion of CHIRP<chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAE1d061Btm5df9Ad5Pg9Ndj1BpuEqaBTygn5TVMsuke3HSp=Bg(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I humbly wish and believe all posts about installing chirp on anything > besides windows and Mac OS should start their own list. > > I will unsubscribe soon if I see many more posts about installing chirp on > Linux. > > If you try to use any distro of linux as your OS of choice you better be > savvy enough, like my son Chris, to solve these issues on your own. > > GET OFF MY LAWN!!! > > > -- Dennis M. Wage (iPhone) 245 Corum Hill Road Castalian Springs, TN 37031 (615) > 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net -- reality check... macOS is based on BSD Linux... 73, John

2 1

[chirp_users] Python2-serial
by Phil 08 May '20

08 May '20

I recently upgraded to Kubuntu 20.04. I have installed Python2 but I'm unable to find python2-serial. Any ideas? -- Regards, Phil

5 4

[chirp_users] PC
by Dennis Wage 06 May '20

06 May '20

How do I use chirp? 😜 -- Dennis M. Wage (iPhone) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net

8 10