- Users - lists.chirpmyradio.com

[chirp_users] New Daily Build
by Build System 12 Jun '21

12 Jun '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210612 A list of the changes included in this build (since the last daily) follows: Changes for Build #651 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22S] Add support for Retevis RT22S This patch adds support for the Retevis RT22S FRS radio to the Radtel T18 driver module. related to #7179 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22S] Prepare for adding Retevis RT22S The RT22S requires support that is nearly identical to that of the Radtel T18. This patch makes changes to the T18 driver in order to make it ready to support the addition of the Retevis RT22S. No features or settings have been modified, added or removed by this patch. related to #7179 [Jim Unroe <rock.unroe(a)gmail.com>] [RT16] Add support for Retevis RT16 This patch adds support for the RT16 variant of the Baofeng BF-T8 related to #8263 [Jim Unroe <rock.unroe(a)gmail.com>] [VX-8DR] Update TX Delay choices for Yaesu VX-8DR The Yeasu VX-8DR inherits much of its settings from the Yaesu VX-8R. The VX-8DR has 9 choices for TX Delay but the inherited setting for the VX-8R only has 7. So if either of the additional choices is selected in the VX-8DR radio itself, the choice will be out-of-range and the Settings tab in CHIRP does not display. This patch adds support for the 9 TX Delay selections for the VX-8DR. Related to #9101 [Jim Unroe <rock.unroe(a)gmail.com>] [GT-5R] Fix TX-Inhibit Outside of Legal Limits The current enforcement only allows TX on the following frequencies. 144.000, 148.000, 420.000 and 450.000 MHz. This patch corrects the logic to allow TX on frequencies within the 144.000-148.000 MHz and 420.000-450.000 MHz ranges. Frequencies outside of these ranges are set to Duplex = "off" (TX disabled). Related to #9077 [Jim Unroe <rock.unroe(a)gmail.com>] [RT76P] Add Retevis RT76P This patch adds support for the Retevis RT76P GMRS handheld radio. #8681 [Jim Unroe <rock.unroe(a)gmail.com>] [KT8900] Add support for a new QYT KT-8900 MCU Version This patch adds support for a new MCU version that has been discovered in the QYT KT-8900 mobile radios. Related to #9085 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22] Add BCL and Signal settings to Retevis RT22FRS and RT622 models This patch adds support for the per-channel "BCL" and "Signal" settings. related to #9043 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22] Address original RT22 block read errors While investigating this issue, the original RT22 was often experiencing read errors while cloning from the radio to CHIRP. It was eventually discovered that the radio was eventually missing an ACK at some point during the download which stopped the cloning process with an error. This patch adds a small delay between the reading a block of data an the sending of the ACK back to the radio indicating that the block of data was received OK. The original RT22 radio now receives every ACK reliably. related to #9043

1 0

[chirp_users] Download problem
by Gerald Stein 08 Jun '21

08 Jun '21

I’m new to Chirp software. The equipment I’m using is a Yaesu FT 60 and a windows 10 laptop. I acquired the cable sometime ago, but haven’t used it until recently. The build I am using is the most recent available. Here’s the problem: I connected the radio to the laptop and uploaded the radio’s contents without problem. I made some changes to the repeaters listed, saved the changes, and then tried to download them back to the radio. The download started normally, but quickly the following error message appeared: “failed to communicate with radio: radio did not respond.” Any suggestions? Thanks and advance for your efforts. Jerry NV7GS +++++ Give a person a fish and you feed them for a day. Teach a person to use the Internet and they won't bother you for weeks, months, maybe years. ~Unknown

3 4

[chirp_users] using chirp for first time.
by Chuck Barnett 07 Jun '21

07 Jun '21

I can't get it to work. hangs up looking for a com port... ?? -- *Chuck Barnett*

6 14

[chirp_users] Moving Chirp Daily to python3?
by Mark Coulter 07 Jun '21

07 Jun '21

I hope this is the right place to ask this. Is there a timeline for getting Chirp-daily working on python3? 73's KE6RTV Mark

6 10

[chirp_users] Can't find Com Ports on Windows 10
by Richard K Parrish 06 Jun '21

06 Jun '21

How do I find the Com Ports on Windows 10? Get the following error message "could not open port COM3: [Error 2] The system cannot find the file specified." Trying to connect to re program a Yaesu FT 50.

5 9

[chirp_users] Moving Chirp Daily to python3
by Mark 05 Jun '21

05 Jun '21

Sent from my Verizon, Samsung Galaxy smartphone No pressing need, I have a couple arounds. It's more it would be nice if...Message: 8Date: Fri, 4 Jun 2021 10:22:22 -0500From: Joe Pizzi <pizzi.joe(a)gmail.com>Subject: Re: [chirp_users] Moving Chirp Daily to python3?To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>Message-ID: <CAJ4WJ3zuoJM-LUtV+_eSn4=RN9K4ZGmpjtM8RJ_56-QVZxTDCg(a)mail.gmail.com>Content-Type: text/plain; charset="utf-8"I'm working on it.I have most tests passing. The gui is still not as full featured as thepython version, but I've procreate my radios with it.Do you have an immediate need for the ported version?Joe PizziKI5LSTOn Wed, Jun 2, 2021, 8:52 PM Mark Coulter <mark(a)coulter.org> wrote:> I hope this is the right place to ask this.>> Is there a timeline for getting Chirp-daily working on python3?>> 73's>> KE6RTV>> Mark>> _______________________________________________> chirp_users mailing list> chirp_users(a)intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users> This message was sent to Joe Pizzi at pizzi.joe(a)gmail.com> To unsubscribe, send an email to> chirp_users-unsubscribe(a)intrepid.danplanet.com>-------------- next part --------------An HTML attachment was scrubbed...URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20210604/2b… ------------------------------

1 0

[chirp_users] Two issues...
by Kenneth G. Gordon 03 Jun '21

03 Jun '21

1) We are unable to program two supposedly-Baofeng-made hand-helds: A) one labeled UV-5R5, concerning which I can find almost no information on the web at all. Firmware (by Button 3) is BFB297. Searching the CHIRP website, I find that that particular firmware is an issue, and has been reported as a bug from at least 8 years ago. Using the standard UV-5R choice in CHIRP results in an error message "No response from radio". And B) one labled UV-5R-V2+. again, we can find no info on how to program this radio other than a cryptic note which stated that it will not transmit in the 2 meter ham band below 145 MHz., which at this point is of no concern to us. 2) As recently as a day or two ago, I found, somewhere on the web, a very extensive listing of these sorts of hand-helds and their equivalent and/or re-labeled clones by many makers including Baofeng. Since that time, I have lost it and can no longer find it. Does anyone here know what I am talking about and where I might find that list again? I thought I found it originally on the CHIRP website, but searching there since does not bring it up. At the time, I saw no need for it, but since then, I find it has become very important to ouir operations here. By "we", "our", and "us", I mean myself and a small group of EMCOMMs operators in our area. I have become the defacto "technical guru" for the group. Any help out there? Thanks, and vy 73 for now, Ken W7EKB

2 2

[chirp_users] 2 issues - one resolved.
by Kenneth G. Gordon 03 Jun '21

03 Jun '21

My issues with the UV-5R5 have been solved. When I first tried to program those radios, I was at a friend's home (he owns the radios) and was using his cable and his version of CHIRP. When I returned to my shop and tried programming those radios, I was using my own cable and my version of CHIRP which is the latest one. I always go to the CHIRP site and download and install the latest version before I begin to program any radio which uses CHIRP. No errors occurred and it worked just fine. My cable is an FTDI, while his is...not... Thanks for the help, folks. vy 73, Ken W7EKB

1 0

[chirp_users] Fwd: chirp_users Digest, Vol 149, Issue 15
by Steve Horning 01 Jun '21

01 Jun '21

Interesting. My the programming in CHIRP for my UV-5R stores/saves the offsets, but CHIRP is not "doing the math" or storing/saving the offsets with the GT-5R. From what I'm seeing, it's on the software side, not the radio side. After downloading the GT-5R's memory after a complete reset, I enter programming info for the radio, save it, close and reopen the file, and the offset field is set to "off". On 5/31/2021 2:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > CHIRP lets the user enter the RX and TX frequencies as an RX > frequency, shift direction and offset, but then CHIRP does the math in > the background to determine the TX frequency. It is the RX frequency > and TX frequency that CHIRP stores in the CHIRP Radio Images (*.img) > file to be sent to the radio in that format because that is what the > radio requires. -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

2 2

[chirp_users] Fwd: chirp_users Digest, Vol 149, Issue 15
by Steve Horning 31 May '21

31 May '21

Well, I'm programming for the amateur bands with the appropriate offsets, so I don't think that's the issue. On 5/31/2021 2:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > I would suspect that the offset, puts it outside its allowed frequency > operating range. -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

1 0

[chirp_users] Chirp, Mac, and Yaesu Ft-60R
by Frank Kohn 31 May '21

31 May '21

Hi, I am having a difficult time setting up Chirp to work with my FT-60R. I am running an older Macbook pro with OS X High Sierra 10.13.6. I have two USB/FTDI cables, one by Valley Enterprises and one by Maxtop. It worked before, but after updating to Chirp Daily-20210520, I get error codes. I checked for the installed driver in Terminal and have ( 170 0 0xffffff7f833ed000 0x7000 0x7000 com.FTDI.driver.FTDIUSBSerialDriver (2.4.4) B137605C-32D8-3E81-89B6-E1F8039FC427). However, this driver does not show up in Chirp. I only see: /dev/cu./usbserial-AL0657ZO and another for Bluetooth. I was able to load an old Chirp image, but it was difficult to arrange and reorder repeaters imported from Repeaterbook. Chirp stalled, and, when I checked my Mac, it indicated the software wasn't responding. I would appreciate any help anyone can provide. After programming the FT-60R, I would also like to use Chirp to program my Yaesu FT-857D. 73, Frank Kohn W3MHP

2 1

Re: [chirp_users] confirm 7742568011fbca21b483239483f2960577634da1
by Steve Horning 30 May '21

30 May '21

Hello, First, I'm not sure if I've missed something in my research, so I apologize if I'm asking an obvious question. I recently purchased a Baofeng GT-5R and tried to program it with Chirp. What I've noticed is that whether I import repeater settings or input them manually, Chirp is not saving the offsets. Instead, it's listing all of them as "off". I have used Chirp to program a UV-5R without any problems. I can enter repeater information manually, but if I download the data from the radio, the offsets also reset to "off". Thanks for your suggestions. 73, Steve, N0XVZ -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

4 3

[chirp_users] GT-3TP, suddenly cannot connect to radios, W10 v1903
by Ceferino Lamb 28 May '21

28 May '21

For months, I've been successfully cloning GT-3TPs for our own use and UV5Rs for friends. Suddenly, last week, I can't connect to any radios via CHIRP. I've installed the most recent CHIRP versions. Today it's chirp-daily-20210520-installer.exe I have two known good cloning cables that worked previously. Same results. I'm using BF-F8HP type as always. I've tried two different COM ports, CHIRP sees both. The first time I tried this morning, Upload to Radio keyed the trx on the HT, solid carrier until I turned the HT off. That's a clue to me that something odd is up. My next step is to install CHIRP on a different laptop and try there. Anybody BTDT? Reno in Texas Quis custodiet ipsos custodes?

5 5

[chirp_users] Suddenly, cannot connect to GT-3TP from latest CHIRP or previous versions
by Ceferino Lamb 25 May '21

25 May '21

For months, I've been successfully cloning GT-3TPs for our own use and UV5Rs for friends. Suddenly, last week, I can't connect to any radios via CHIRP. I've installed the most recent CHIRP versions. Today it's chirp -daily-20210520-installer.exe I have two known good cloning cables that worked previously. Same results. I'm using BF-F8HP type as always. I've tried two different COM ports, CHIRP sees both. The first time I tried this morning, Upload to Radio keyed the trx on the HT, solid carrier until I turned the HT off. That's a clue to me that something odd is up. My next step is to install CHIRP on a different W10 laptop and try there. Anybody BTDT? Reno in Texas Quis custodiet ipsos custodes?

3 5

[chirp_users] Model addition request questions
by Matt Zorzin 25 May '21

25 May '21

I have a wonderful Icom R10 that has not yet had support added in Chirp. I did find the request on the tracker to add that, and both I and another user have offered loaners. I am aware that this is a volunteer project but was wondering if there is any way I can step up and offer my rig as a loaner to get the support added? The issue's been open for quite a while and was just wondering if there is anything I can do that might get it added sooner rather than later. Thanks for all you do. -- Matty KC4YLV

1 0

[chirp_users] Comment field limits?
by Leverett A.J. 'Jim' Hadlow Sr 22 May '21

22 May '21

Programming a Baofeng BFF8-HP: I noticed when the Comments field is populated, I am unable to use a properly programmed repeater. When I clear all the comments from the field, reset the radio to factory settings, then reprogram with CSV (cleared of comments), the repeater function is as expected. Reprogramming via CHIRP without resetting the radio to factory settings does NOT clear the problem. Is there a limit to the number of characters the comments field can hold or are there certain characters (comma, open/close parens, underscore, dash, slash, question mark, decimal/period, space, equal sign, digits?) one shouldn't enter there? DE WQLS203/KF5FXE

4 3

[chirp_users] Update on Linux Travails
by steve.owens70＠protonmail.com 21 May '21

21 May '21

Thanks to all who assisted. Knowing that taking multiple paths through the terminal window might be a bit much for my meager abilities, I found a GUI approach, and added the repository advised on the website in the "software sources" tool, then used the synaptic package manager to install and (a few days later) update. This is all in Linux Mint 20.1. I may see what update options are available to me in Mint's regular software manager, as my way isn't exactly seamless, but it does work. Cheers and 73, KF5TJD Sent with [ProtonMail](https://protonmail.com) Secure Email.

1 0

[chirp_users] New Daily Build
by Build System 20 May '21

20 May '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210520 A list of the changes included in this build (since the last daily) follows: Changes for Build #650 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-T8] add support for the Baofeng BF-T8 This patch adds support for the Baofeng BF-T8 (and it variants) related to #8263 [Dan Smith <dsmith(a)danplanet.com>] Default to new-style detection for the GT-5R Related to #9077 [Dan Smith <dsmith(a)danplanet.com>] Add Radioddity GT-5R This is a special version of the UV-5R with a requirement around enforcing tx-inhibit outside of the legal limits. #9077 [Kosta A. <ve7kcy(a)gmail.com>] Modified icomciv probe_model to use directory based driver search pattern. #4547

1 0

[chirp_users] Manuel Inputs of Chanels
by Bennie Potgieter 17 May '21

17 May '21

Afternoon I'm new at this,I want to manually input(type) the channels on Leiers sheet into my radio BF-888 program. I have never done it so I don't know all the abbreviations on the chirp top task bar. Can someone please assist? Thank you

2 3

[chirp_users] Radio did not respond error
by Joshua Harper 14 May '21

14 May '21

Greetings, I have a Tidradio TD-F9GP and I am attempting to program channels on the Chirp application on my MacBook Pro. I am running on macOS High Sierra version 10.13.6 and it is giving me the error (Radio did not respond). I am not the most tech savvy and would like some assistance with this issue. Your help would be most appreciated. Thank you, Joshua Harper

3 2

[chirp_users] Linux newbie looking for a GUI update solution
by steve.owens70＠protonmail.com 14 May '21

14 May '21

One more shot here. I initially downloaded and (somehow) installed the flatpak version. It works. I have cloned two radios with it. It just tells me it would like to be updated, and I can't figure out how to do it. Nothing in my right-click quiver will open the new flatpak. It just sits there in my downloads folder. I've had competent users walk me through the steps on the web page, but they didn't work. At some point, should I uninstall what I have, keeping the couple of .img files I've generated, and try to install either through the software manager, or should I grab what is offered in the Synaptic Package Manager perhaps? I have a screen shot of that, but it occurs to me that I have never seen anyone post a pic to this list. If it's ok, let me know, and I'll show what is available to me in the package manager. Thanks, Steve, KF5TJD Sent with [ProtonMail](https://protonmail.com) Secure Email.

2 1

[chirp_users] mail list
by Joe Tittiger 10 May '21

10 May '21

-- *Google mail has admitted to planning serious censorship of our mail. Thus I have a secure account at tittiger(a)protonmail.com <tittiger(a)protonmail.com> in case you mail does not get through at my normal email.=======================Dear Brothers and Sisters,**The information below will transform your life.* *Our health is the most important thing that we possess.**Please take a look. * *God Speed* *JoeWeston A Price Society - Principles of Healthy Diets pamphlethttps://379p6v3kqsqc1oz8or2u449e-wpengine.netdna-ssl.com/wp-content… <https://379p6v3kqsqc1oz8or2u449e-wpengine.netdna-ssl.com/wp-content/uploads…>https://www.westonaprice.org/health-topics/abcs-of-nutrition/principles-of-… <https://www.westonaprice.org/health-topics/abcs-of-nutrition/principles-of-…>--------------------------------------------------Dr Mercola's - Diet Against Disease Episode 1 <https://www.youtube.com/watch?v=xGLIs_XcFdc&index=1&list=PL_kdKng72zc4nTNzY…> through episode 8https://www.youtube.com/watch?v=xGLIs_XcFdc&index=1&list=PL_kdKng72zc4nTNz… <https://www.youtube.com/watch?v=xGLIs_XcFdc&index=1&list=PL_kdKng72zc4nTNzY…>Finally do not pass up up this page:Missouri Free Press - Health Resources <http://missourifreepress.com/health-resources/>* *If any of the above links are broken please let me know and I will give you ones that do work. Or let me know if I can help you in any other way.* *=====================================* *What have you done for the cause of liberty today?Perhaps mindlessly repeated the questionable "Pledge of Allegiance"?Or flown a piece of cloth and think that you have done your part?I hope you have done something a LOT more effective.....**--------------------------------------------------* * MISSOURI FREE PRESS <http://missourifreepress.com/>Legitimate government exists only to protect rights. Not to grant them. Not to trample them. *“Have nothing to do with the fruitless deeds of darkness, but rather expose them.” ~Ephesians 5:11 *Dum Spiro, Pugno <http://mymemory.translated.net/en/Latin/English/dum-spiro%2C-pugno> ~MFP* ** Please consider putting a link to Missouri Free Press in your email signature. If you do perhaps your prodigy will be born into a sane, free **world. Very much unlike our current world.*

1 0

[chirp_users] No tty/USBx showing in dropdown list.
by Roger Reeves M0ROJ 10 May '21

10 May '21

Still having problems getting my Yaesu FTM-3207D to connect with CHIRP-daily, using Ubuntu Linux 20.04. The connection dialogue does not specifically show this radio, so I use the nearest selection FTM-3200D. Then when selecting the Port type and number, it only offers serial ports /dev/ttyS0 thru 31, and no USB ports. All thoughts and help greatly appreciated? Many thanks and 73,

5 4

[chirp_users] UV-5R Settings Blank
by jgmcbride＠verizon.net 10 May '21

10 May '21

Just recently started using Chirp. When I go to settings the whole column is blank, I have looked all over the internet and have found nothing that helps. I am asking if there is any help available? Thank you! Joe McBride

4 3

[chirp_users] Fail Install CHIRP on Slackware
by D.J.J. Ring, Jr. 10 May '21

10 May '21

Hello Discussion, Running SLINT, Slackware International, based on Slackware 14.2. I cannot install chirp because there is no libxml2mod. ImportError: No module named libxml2mod fakeroot -- sh chirp.SlackBuild Failed Full errors: No handlers could be found for logger "chirp.drivers.anytone778uv" Traceback (most recent call last): File "setup.py", line 6, in <module> from chirp.drivers import * File "/usr/src/slapt-src/ham/chirp/chirp-daily-20201128/chirp/drivers/generic_xml.py", line 17, in <module> import libxml2 File "/usr/lib64/python2.7/site-packages/libxml2.py", line 1, in <module> ImportError: No module named libxml2mod fakeroot -- sh chirp.SlackBuild Failed I don't know who works on the slackware build of chirp. Thanks, David N1EA

1 1

[chirp_users] Errno 13 on activating radio clone, plus Permission denied.
by Roger M0ROJ 09 May '21

09 May '21

Just installed CHIRP-daily 20210429 to use with my Yaesu FTM3207D (FTM-3200D on menu). When connecting the radio to the laptop (Linux Ubuntu 20.04) and starting CLONE I keep on receiving an error message errno-13 regardless of which ttysx I select. It also tells me permission denied. And so no connection made. Which permission needs changing and how please? There's no provision for that within the CHIRP software, that I can see. If its a Linux permission for the software (which I doubt), then why does the CHIRP software function in other respects? Help would be appreciated, please? Thanks and 73,

2 1

[chirp_users] UV-82 bricked?
by Michal Smialowski 05 May '21

05 May '21

I have a Baofeng UV-82 that was programmed, I downloaded the codeplug, added a frequency then uploaded the new codeplug to the radio. When I went to turn the radio back on, there was only a faint display visible on the top line. It looks like a series of black rectangles. Doesn't go beyond that, no channel, no frequency, none of the keys respond. I tried taking the battery out and turning it back on... no help. Tried downloading front the radio... nothing. Is the radio bricked or is there something else that I can try ? tnx Mike VE7SML

10 15

[chirp_users] Fwd: Running CHIRP on a mobile phone
by Valerij T 04 May '21

04 May '21

Hi my friend! You received this letter because you are in the chirp_users(a)intrepid.danplanet.com mailing list. We use the CHIRP program to work with our radios. This great program can run on Windows, Linux, MAC OS. But I would like to be more mobile and run CHIRP on my phone. Imagine how cool it would be! I want to start with one radio, Baofeng UV-5R. Because I have it and I can test the application with one. New devices will be added according to my ability and ability to test this application. I will trust that I will succeed. To be honest, I'm not an expert in mobile app development. But I will become one! And developing CHIRP for a smartphone would be a good practice that would benefit everyone. I would like to write such an application and would appreciate any help with this. If you can help me with this development, please contact me by email. P.S. If the Admin is reading this and wants to make a separate mailing list for this question, I would greatly appreciate it. If this happens, I will post a new link topic. This way we will avoid spam. Best regards, Valerij T.

5 7

Re: [chirp_users] UV-82 bricked?
by Rich NE1EE 04 May '21

04 May '21

My wife's mascara suggests that it will make her lashes 4 mm longer, and my mountain bike handlebars are 400 mm ;-) Little-by-little, day-by-day... ...though there are some adjustments...I am in the US, but have been using SI since the 1970s. I had to go to Canada to buy metric tape measures and folding rules. When I say that my HF antenna is a 40 m EF wire, I get a lot of hams here thinking at first that I have a wire dedicated to 40 m, not a wire 40 m long. I find metric so much easier in so many areas of my life, not least radio. ~R~ 72/73 de Rich NE1EE The Dusty Key On the banks of the Piscataqua On 2021-05-03 08:24:-0500, you wrote: >Harr!! > >On Sun, May 2, 2021 at 7:12 PM Chaplain Dave Sparks <<mailto:dsparks@pobox.com>dsparks(a)pobox.com> wrote: >Well, you know what they say about the metric nerds: > >"Give them 25.4 mm. and they'll take 1.6 km."

1 0

[chirp_users] Program a Icom 7100
by Roger Fethkenher 03 May '21

03 May '21

Can I use to program my Icom 7109?

2 1

[chirp_users] programing help
by jack strickland 03 May '21

03 May '21

3 2

[chirp_users] New Daily Build
by Build System 29 Apr '21

29 Apr '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210429 A list of the changes included in this build (since the last daily) follows: Changes for Build #649 [Rick DeWitt <aa0rd(a)yahoo.com>] [icomciv.py] Fix mem.duplex setting when no duplex attribute. #9025

1 0

[chirp_users] New Daily Build
by Build System 28 Apr '21

28 Apr '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210428 A list of the changes included in this build (since the last daily) follows: Changes for Build #648 [Dan Smith <dsmith(a)danplanet.com>] Fix issues in recent ft2900 patch The recent fix for #9013 introduced two style issues and also created a detect conflict between the base 2900 driver and the mod'd one. Since the mod version is new, we can always refuse to match based on file size and rely on metadata for detection. [KC2VON <kc2von(a)zoominternet.net>] Added a device under the Yaesu tree for the FT-2900R/1900R(TXMod). For compatibility with FT-2900R/1900R jumper 3 opened for full band TX. Issue #9013 [Jim Unroe <rock.unroe(a)gmail.com>] [leixen.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [kyd.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [GMRS-V1] Add Missing FileID For BTECH GMRS-V1 This patch adds the US32412 fingerprint to the "_fileid" list. fixes #9005 [Jim Unroe <rock.unroe(a)gmail.com>] [retevis_rt23.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [uv5r.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [retevis_rt26.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [retevis_rt22.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [retevis_rt1.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [alinco.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995

1 0

Re: [chirp_users] chirp_users Digest, Vol 148, Issue 18
by steve.owens70＠protonmail.com 27 Apr '21

27 Apr '21

“Command not found” Mint has an app for handling flatpaks but it doesn’t seem to work. Your scroll wheel doesn’t work for you? If you can’t answer a question or don’t want to take the time to do anything other than crap on somebody just move on, Sent from ProtonMail for iOS On Tue, Apr 27, 2021 at 2:00 PM, <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > Today's Topics: > > 1. Re: Update a Flatpak? (Joe Pizzi) > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 26 Apr 2021 18:51:06 -0500 > From: Joe Pizzi <pizzi.joe(a)gmail.com> > Subject: Re: [chirp_users] Update a Flatpak? > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <3b2b1e18-9eb2-8eee-93b4-71fffb1713a1(a)gmail.com> > Content-Type: text/plain; charset="utf-8" > > And, Google doesn't work for you? > > A search for "update flatpak application" yields: > > https://www.systutorials.com/docs/linux/man/1-flatpak-update/ > > Joe Pizzi > KI5LST > > On 4/26/2021 12:08 PM, Steve Owens via chirp_users wrote: >> Good afternoon, all. >> >> I have used chirp in the past, but I have a new install of Mint >> Cinnamon 20.1. I have installed the previous version of Chirp, but >> just became aware that a new version is available. >> >> I cannot remember how I got the flatpak to install initially (must >> have been easy) and I cannot see how to update it. The built in >> flatpak manager in mint is not an option when I right click the file >> in my downloads. >> >> Hope I have not muddled my question too much. >> >> 73, >> >> Steve >> >> Sent from ProtonMail for iOS >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Joe Pizzi at pizzi.joe(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >

1 0

[chirp_users] Update a Flatpak?
by steve.owens70＠protonmail.com 27 Apr '21

27 Apr '21

Good afternoon, all. I have used chirp in the past, but I have a new install of Mint Cinnamon 20.1. I have installed the previous version of Chirp, but just became aware that a new version is available. I cannot remember how I got the flatpak to install initially (must have been easy) and I cannot see how to update it. The built in flatpak manager in mint is not an option when I right click the file in my downloads. Hope I have not muddled my question too much. 73, Steve Sent from ProtonMail for iOS

2 1

[chirp_users] Kenwood TK-760G-1 unable to read in Ubuntu 20.04, able to read/write in Windows 10
by Michael Carson 26 Apr '21

26 Apr '21

I have 2 Kenwood TK-760G-1 radios (eBay special, pulls) that are exhibiting the same symptoms. First I tried reading them in Linux - I use this system for programming other, unrelated, radios, so it's my go-to, and it failed. (Details below) It says "Radio Ident Successful", then errors out with "The radio send 28 bytes, we need 258". (Which error I could *swear* I've seen here before and will feel really dumb when someone points me to the already discussed fix.) The radio does go into "PC" mode, per the display. Puzzled, I then obtained a copy of the Kenwood software, KPG-56D v4.22. Installed, plugged in the cable, found the COM port and...it worked like a champ. More puzzled, I grabbed chirp for Windows, installed, and it worked fine. Able to read and write to the radio Tried it again in Ubuntu, no joy. Some details: jounalctl info when I insert the cable: Apr 19 21:57:08 xps13 kernel: usb 1-2: new full-speed USB device number 24 using xhci_hcd Apr 19 21:57:08 xps13 kernel: usb 1-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 3.00 Apr 19 21:57:08 xps13 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 19 21:57:08 xps13 kernel: usb 1-2: Product: USB-Serial Controller Apr 19 21:57:08 xps13 kernel: usb 1-2: Manufacturer: Prolific Technology Inc. Apr 19 21:57:08 xps13 kernel: pl2303 1-2:1.0: pl2303 converter detected Apr 19 21:57:08 xps13 kernel: usb 1-2: pl2303 converter now attached to ttyUSB0 Apr 19 21:57:08 xps13 mtp-probe[263657]: checking bus 1, device 24: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2" Apr 19 21:57:08 xps13 mtp-probe[263657]: bus: 1, device: 24 was not an MTP device Apr 19 21:57:08 xps13 snapd[36670]: hotplug.go:199: hotplug device add event ignored, enable experimental.hotplug Apr 19 21:57:08 xps13 mtp-probe[263670]: checking bus 1, device 24: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2" Apr 19 21:57:08 xps13 mtp-probe[263670]: bus: 1, device: 24 was not an MTP device Apr 19 21:57:11 xps13 ModemManager[1008]: <info> Couldn't check support for device '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2': not supported by any plugin Permissions on ttyUSB0: crw-rw---- 1 root dialout 188, 0 Apr 19 21:58 /dev/ttyUSB0 My groups: 4(adm),20(dialout),21(fax),22(voice),24(cdrom),25(floppy),26(tape),27(sudo),29(audio),30(dip),46(plugdev),112(bluetooth),115(tcpdump),120(lpadmin),122(scanner),123(saned),128(pulse),129(pulse-access),131(lxd),132(sambashare),133(wireshark),134(kismet) Output of a serial sniffer: pnevulator --ascii --timing-print --tty /dev/ttyUSB0 --read 2021-04-19 21:58:07.523807: 06 . Output of a different serial sniffer run (when the cable grabbed ttyUSB1): jpnevulator --ascii --timing-print --tty /dev/ttyUSB1 --read 2021-04-19 21:46:39.400999: 00 . 2021-04-19 21:46:39.560981: 36 30 30 04 FF F1 600... Occasionally, the serial monitor will show something more, like: 2021-04-19 22:42:00.199228: 00 . 2021-04-19 22:42:12.661137: 06 . 2021-04-19 22:42:13.163410: 76 32 2E 30 30 20 FF FF FF FF 15 57 80 75 C1 42 v2.00 .....W.u.B 90 75 C3 03 00 A1 10 B1 32 EC A0 FD A7 FF 03 7D .u......2......} B4 D8 02 FD 8D 34 06 FE 55 73 F4 EE 07 73 F5 F0 .....4..Us...s.. 07 77 44 16 00 77 E5 75 A0 7E B0 0D 6E 21 B6 FB .wD..w.u.~..n!.. 73 F0 EE 07 73 F2 F0 07 77 40 16 00 77 E2 EC A0 s...s...w@..w... FD A7 FF 03 7D B4 D8 02 FD 8D 34 06 FE 20 C6 01 ....}.....4.. .. FB 73 F0 EE 07 73 F2 F0 07 77 40 16 00 77 E2 EC .s...s...w@..w.. A0 FD C3 00 04 7D B4 D8 F2 FD 8D 34 06 FD 76 FF .....}.....4..v. 03 7D F2 E7 01 CC 0A 6E 1B 76 0F FA 08 20 6A 14 .}.....n.v... j. 97 DF FA 08 7D E2 03 00 7D E2 E0 97 FD FB 22 04 ....}...}.....". 7D B4 F3 76 0F F0 08 10 6A 05 9F 02 F0 08 F3 76 }..v....j......v 0F 15 09 10 6A 04 F4 5A 05 75 80 80 00 03 7E B0 ....j..Z.u....~. 01 6E 38 76 0F 15 09 08 6A 17 76 0F E5 08 10 6E .n8v....j.v....n 2A D8 02 FD DF E9 03 74 C2 0B FD EE E2 03 FE 1B *......t........ D8 02 FD 11 FE 03 0C 6E 07 D8 02 FD E1 EA 03 74 .......n.......t C2 0B FD 77 E5 03 97 DF 16 09 76 0F ED 08 02 6E ...w......v....n 2B 76 0F 15 09 08 6A 0E 76 0F 14 09 7F +v....j.v.... If I have the serial monitor running, Chirp instead gives the error "Error reading data from radio", so I don't have much faith that it's actually giving good data. Using the Kenwood Detect driver returns "No response from radio." I *can* program the radio in Windows, so this isn't *urgent* but...I don't want to. I'd like to get this working in Linux and also understand what's going on. Thank you for your time & attention, C.

2 1

[chirp_users] UV-S9 Volume issue
by Jimmy 20 Apr '21

20 Apr '21

Programmed my NEW Baofeng UV-S9 about an hour ago for the first time, upon completion, upload and restart, I noticed I had no volume. I plugged in the provided earpiece to check if it was the radio and I had sound in the earpiece but not on the radio speaker. Please advise. Thanks

2 1

[chirp_users] Q: Baofeng GT-5R (new, 'legal,' model)
by Ken Hansen 19 Apr '21

19 Apr '21

Hello, New to group, searched past 4 months of maillist archives, no obvious discussion about this radio there, so I'm posting here. This new radio is a 'cleaned-up' and TX Freq-limited version of the ever-popular UV-5R - it has as its selling features TX hard-limited to 2m & 70cm US ham bands and claims to have been 'cleaned up' regarding spurious emissions. My issue is, it different from classic UV-5R, so while I can do basic programming I can, for example, set a channel to 'skip' in CHIRP but the GT-5R has no documented skip function, so skip is not transferred to the radio. I also struggle to enter a power-on message, and other minor issues when I pretend it is a UV-5R. Could we create a proper entry for this model? This radio is being targeted for new hams by mfg, and having to jump thru hoops to get it to work with CHIRP is no bueno. I'm happy to test release candidates. Thanks, Ken, N2VIP

2 1

Re: [chirp_users] UV-S9 Issues - image file attached
by bob＠tyroneflats.com 17 Apr '21

17 Apr '21

Let's see if the 3rd time is truly a charm - here's another try at getting the image file to you Jim. Best Bob n0zfv -- This email has been checked for viruses by AVG. https://www.avg.com

2 1

Re: [chirp_users] UV-S9 Issues
by bob＠tyroneflats.com 17 Apr '21

17 Apr '21

I evidently misspoke - it appears I did edit the original files. Attached is the image file I created from the first download, then edited, and a CSV which I just now created via Export. "Radio > Upload to Radio" is available in both files but neither puts the listed freqs into the radio. Microsoft Outlook doesn't seem to like the .img file so I renamed it to .bob. Hopefully you can change it back and have a usable file - please let me know. Thanks Jim -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Jim Unroe Sent: Friday, April 16, 2021 11:55 AM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] UV-S9 Issues On Fri, Apr 16, 2021 at 1:32 PM <bob(a)tyroneflats.com> wrote: > > Pretty safe bet this is all operator error but this thing is eating my lunch! I downloaded and installed the most recent version (20210416) first thing this morning. I tried following the steps in the help documentation – download from radio, export to img file, etc. When I upload the very same image file, with no edits, to the radio it populates both banks with 676.948 Mhz, changes language to Chinese, locks the radio and produces this error: > > “Edit > Properties” in Chirp does nothing. I’ve been able to unlock the keyboard and do a reset then change language back to ENG but everything (even FM broadcast if I reset “All”) is gone. > > > If I open the exported spreadsheet file I get “Unable to Detect Model” every time so I always choose Radioddity UV-5RX3 as directed by several sources. > > > I edited the spreadsheet, adding a few local repeaters (saved with different filename so still have the original) but, when I open that file I get the attached error plus the “Radio > Upload to Radio” menu option is greyed out. > > > And I never have been able to enter any channels in the 1.25 M band even though the aforementioned upload fills a few memories with channels around 300, 400, 500 & 600 Mhz. > > > I got my first HAM license in the 70’s. I was a techy for years > (retired now) so this is as embarrassing as it is frustrating but this > project is running out of fun! I keep thinking of that old help desk > joke where the tech tells the user “You’d better just box that up and > send it back to the factory.” “Oh, is it broken?” asked the client. > “No” replied the tech, “You’re just too #@%! stupid to use it!” (I > feel like that user right now!) > > > Thanks all! > > > Bob > > N0zfv > Do you have the original, unedited, successful download from the radio? Attach it. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bob at bob(a)tyroneflats.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- This email has been checked for viruses by AVG. https://www.avg.com

4 8

[chirp_users] Motorola CDM
by Robert Carlson 17 Apr '21

17 Apr '21

I have programming software for my various amateur radio equipment as well as specific Motorola software. I was directed here because I need to drop the frequency range on a cdm1550 by 2 MHz all the top of the bottom. From what I have read There is a waris.py file somewhere available for download did enables chirp to work with a Motorola? I am confused on the matter. I've read the offsets that need to be changed with a hex editor and if that's all I need to do then I suppose that will work. On the other hand, I'd love to support chirp financially if it can handle all of my various pieces of equipment from one piece of software. Or am I misunderstanding that I still need my RSS software or CPS software? Thank you in advance.

3 3

[chirp_users] UV-S9 Issues
by bob＠tyroneflats.com 16 Apr '21

16 Apr '21

Pretty safe bet this is all operator error but this thing is eating my lunch! I downloaded and installed the most recent version (20210416) first thing this morning. I tried following the steps in the help documentation - download from radio, export to img file, etc. When I upload the very same image file, with no edits, to the radio it populates both banks with 676.948 Mhz, changes language to Chinese, locks the radio and produces this error: "Edit > Properties" in Chirp does nothing. I've been able to unlock the keyboard and do a reset then change language back to ENG but everything (even FM broadcast if I reset "All") is gone. If I open the exported spreadsheet file I get "Unable to Detect Model" every time so I always choose Radioddity UV-5RX3 as directed by several sources. I edited the spreadsheet, adding a few local repeaters (saved with different filename so still have the original) but, when I open that file I get the attached error plus the "Radio > Upload to Radio" menu option is greyed out. And I never have been able to enter any channels in the 1.25 M band even though the aforementioned upload fills a few memories with channels around 300, 400, 500 & 600 Mhz. I got my first HAM license in the 70's. I was a techy for years (retired now) so this is as embarrassing as it is frustrating but this project is running out of fun! I keep thinking of that old help desk joke where the tech tells the user "You'd better just box that up and send it back to the factory." "Oh, is it broken?" asked the client. "No" replied the tech, "You're just too #@%! stupid to use it!" (I feel like that user right now!) Thanks all! Bob N0zfv -- This email has been checked for viruses by AVG. https://www.avg.com

2 1

[chirp_users] New Daily Build
by Build System 16 Apr '21

16 Apr '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210416 A list of the changes included in this build (since the last daily) follows: Changes for Build #647 [Jim Unroe <rock.unroe(a)gmail.com>] [BJ-318] Add support for the Baojie BJ-318 This patch adds support for the Bajoie BJ-318 mobile radio. Research and main coding by Mark Hartong Assistance, pep8 compliance and submission by Jim Unroe related to #6235 [Jim Unroe <rock.unroe(a)gmail.com>] [BJ-318] Driver prep to make ready to support the Baojie BJ-318 This patch makes changes to the lt725uv.py driver to facilitate the addition of support for the Baojie BJ-318. The features and settings of the radio models that this driver currently supports are not affected. related to #6235 [Jim Unroe <rock.unroe(a)gmail.com>] [LT-725UV] Fix for incorrect range specified for VFO B Initial Chan: setting The Settings -> VFO B-Lower Settings -> Initial Chan:" setting currently provies a selection range of 0-127. This range should be 1-128. This patch updates the Initial Chan: seting to provide the correct range. Models affected: LUITON LT-725UV Baojie BJ-218 / Hesenate BJ-218 / Zastone BJ-218 Fixes #8979 [Dan Smith <dsmith(a)danplanet.com>] Fix base match_model definition for zero memsize The base match_model() implementation defaults to comparing the file size to Radio._memsize in order to identify the proper driver for a given file (for legacy files only). Since the default for the _memsize in CloneModeRadio is zero, any empty file will be identified as a match by any new driver that relies on metadata and does not (nor does it need to) override _memsize. The first driver returned from the directory dict that "matches" will be returned. This fixes #8967 which manifests as a failure to run File->New. Since the new file is zero length, we fail to properly load the CSVRadio driver that we need because we incorrectly allow the directory to match the zero length against everything.

1 0

[chirp_users] new ham radio digital data group
by Robert Withers 16 Apr '21

16 Apr '21

Click this link and click "join this group". Discussion forthcoming. https://groups.google.com/g/ham-digital-data Kindly, Robert

3 3

[chirp_users] no drivers found for UV-S9 programming cable
by bob＠tyroneflats.com 15 Apr '21

15 Apr '21

Bought a new UV-S9 which did not include a cable. The promised software was not included however there was a link in the user's manual (http://www.abree.com/downloads) which takes you to a "Buy This Domain" site. I bought a cable from Amazon, a "Tenway Baofeng USB Programming Cable Win 7/10, 64Bit for Baofeng Radio UV-5R, BF-888S, H-777 with Driver CD" but Win 10 (64 bit) cannot find any drivers. Cable shows up in Device Manager as "Other Devices / USB Serial" with no COM port assignment identified and properties says "There are no compatible drivers for this device". Anyone else encounter anything like this or can you offer insights into how to get this radio programmed? Thank you all very much! Bob N0zfv -- This email has been checked for viruses by AVG. https://www.avg.com

4 5

[chirp_users] no drivers found for UV-S9 programming cable - solved
by bob＠tyroneflats.com 15 Apr '21

15 Apr '21

Found a guide online that pointed me to tenwayradio.com/download-center with instructions on installing the CH-340 driver. Downloaded, unzipped, and ran the program and voila! I now have COM3. Next step is loading local repeaters into CHIRP. BTW, this is supposedly a tri-band but it won't allow freqs on the 1.25 M band??? Thank you for the responses. Sorry I didn't find this sooner! Bob N0zfv -- This email has been checked for viruses by AVG. https://www.avg.com

2 1

[chirp_users] Import for BaoFeng UV9r
by Jerry s 14 Apr '21

14 Apr '21

Hi all, I’m a new user of CHIRP. I hooked my radio to my Mac and had no problems reading the config and exporting it to a .csv file. I then updated the .csv file as per the attached file. I’m getting an error saying no channels. I’ve included the original export to CSV as well as the file I’m trying to import (Merged V1) . Any clue would be appreciated. Jerry KB2GCG ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ "Those who would give up essential liberty to purchase a little temporary safety, deserve neither liberty nor safety." - Ben Franklin It's also true that those who would give up privacy for security are likely to end up with neither. It's not the years in your life that count, but the life in your years" "Change is Inevitable, Growth is Optional" "Without continual growth and progress, such words as improvement, achievement and success have no meaning." - Benjamin Franklin ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

4 4

[chirp_users] Column For Power
by Glenn K0LNY 11 Apr '21

11 Apr '21

Hi, I would like to set the power levels differently for some frequencies in my CSV file for my Baofeng radios. I cannot tell by the names of the columns which is for power, if it is there. can anyone fill me in? Here are the columns I have: Location Name Frequency Duplex Offset Tone rToneFreq cToneFreq DtcsCode DtcsPolarity Mode TStep Skip Comment URCALL RPT1CALL RPT2CALL Thanks. Glenn

2 1

[chirp_users] Download From Radio under Ubuntu 20.04 error
by Robert 09 Apr '21

09 Apr '21

Hello, Total noob, here. Taking my exams on Thursday. Got my TIDRADIO UV-5R and the FTDI cable. How can I detect which /dev/tty is being used for the FTDI connection to my radio? I tried /dev/ttyS0 and /dev/ttyUSB0 which resulted in the error 'Radio did not respond'. Kindly, Robert . .. ... ‘...^,^

14 52

[chirp_users] Help to install CHIRP-DAILY
by bndct 33 09 Apr '21

09 Apr '21

Hello dears friends, I have difficulties to install Chirp on my Linux Mint Cinamon 20. Can I have some support to do it? There are two archives to download in the website. One is tar.gz and the other is flatpak. I can unpak the tar.gz, but I have no idea how can I intall from the folder. Can you help me please? With the flatpak I have problem, because normally to install a flatpak we need a file flatpakref So, I realy need install it and I will be very happy if someone could help me. Thank you.

3 3