- Users - lists.chirpmyradio.com

[chirp_users] Guide for CHIRP *Settings*?
by Gregory Beyer 07 Jun '22

07 Jun '22

Hi, the Memories portion of CHIRP is well covered here https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns. However there a whole other section of the CHIRP software-- the Settings tab (Basic, Advanced, Other, Work Mode, FM Rado preset (obvious), DTMF and Service) Is there a guide for what all of these many settings are? Thanks -- *________________________* *Greg Beyer greg(a)beyerusa.net* <http://conventionofstates.com/?ref=67246> Drain the Swamp and Restore Local Governance <http://conventionofstates.com/?ref=67246>

7 12

[chirp_users] Suspicious email or not??
by Mike Earls 07 Jun '22

07 Jun '22

a9ad2aead92c6bc1a1e7cd666c8c2b6e47eb2e8a chirp_users-request(a)intrepid.danplanet.com 9:32 AM (12 hours ago) to me Your membership in the mailing list chirp_users has been disabled due to excessive b -- Mike Earls AF5MS TSRA Life Member NRA Benefactor Member

2 1

[chirp_users] So I can post on the list
by Sam Phillips 07 Jun '22

07 Jun '22

killerbees113(a)gmail.com

2 1

[chirp_users] How to enter uplink & downlink tones
by Gregory Beyer 06 Jun '22

06 Jun '22

Hi, I'm a new amateur so sorry if this seems a dumb question. For repeaters with only an uplink tone, one simply selects "Tone" in Tone mode and selects the single tone to get into the repeater. Some repeaters list both an uplink and a downlink tone. In this case, which Tone mode option do I select? And in which property do I enter the downlink tone? Thank you. -- *________________________* *Greg Beyer greg(a)beyerusa.net* <http://conventionofstates.com/?ref=67246> Drain the Swamp and Restore Local Governance <http://conventionofstates.com/?ref=67246>

3 2

[chirp_users] Roger beep on a per channel basis
by Sam Phillips 06 Jun '22

06 Jun '22

Is there anyway to put a Roger beep on certain channels but not others on the Baofeng UV-5R? I've looked and looked and only seen how to put a PTT-ID on per channel. Could there be a way to do it through developer options? Any help is appreciated, Sam

3 3

Re: [chirp_users] No Channels Found
by K0LNY_Glenn 05 Jun '22

05 Jun '22

Here's my CSV file if anyone cares to see what the problem might be. Thanks. ----- Original Message ----- From: "K0LNY_Glenn" <glenn(a)ervin.email> To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Sent: Saturday, June 04, 2022 5:10 PM Subject: No Channels Found Hi, Maybe someone can look at my CSV file for me. I'm trying to import a CSV file into my TYT 9800, and I have a CSV file with almost 200 entries, and when I import, it says no channels found. I'm using Windows with a screenreader, so I am limited to what I can manage. Fortunately Chirp brings up the last radio I accessed, otherwise I would have a very hard time routing cursors to try and select the radio in the list. But I use the Jaws cursor to read a dialog box that comes up when I paste the path to the CSV file and enter. For screenreader users, or anyone else in windows, shift + applications key and then press the letter A on your file to import, outside of Chirp, and the path to the file will be in the clipboard for pasting. Browsing in the Chirp program in windows would be another challenge, that is why I do it this way. All this was easy in Linux. Anyway, thanks for any assistance. Glenn

6 9

[chirp_users] No Channels Found
by K0LNY_Glenn 04 Jun '22

04 Jun '22

Hi, Maybe someone can look at my CSV file for me. I'm trying to import a CSV file into my TYT 9800, and I have a CSV file with almost 200 entries, and when I import, it says no channels found. I'm using Windows with a screenreader, so I am limited to what I can manage. Fortunately Chirp brings up the last radio I accessed, otherwise I would have a very hard time routing cursors to try and select the radio in the list. But I use the Jaws cursor to read a dialog box that comes up when I paste the path to the CSV file and enter. For screenreader users, or anyone else in windows, shift + applications key and then press the letter A on your file to import, outside of Chirp, and the path to the file will be in the clipboard for pasting. Browsing in the Chirp program in windows would be another challenge, that is why I do it this way. All this was easy in Linux. Anyway, thanks for any assistance. Glenn

2 1

[chirp_users] New Daily Build
by Build System 04 Jun '22

04 Jun '22

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20220604 A list of the changes included in this build (since the last daily) follows: Changes for Build #689 [DuckSoft <realducksoft(a)gmail.com>] add zh_CN to build process [DuckSoft <realducksoft(a)gmail.com>] mainapp.py: add translation credits [DuckSoft <realducksoft(a)gmail.com>] Create zh_CN.po [DuckSoft <realducksoft(a)gmail.com>] chirpw: add zh_CN entry

1 0

[chirp_users] Using chirp with ubuntu 22.04
by Guy Schlosser 03 Jun '22

03 Jun '22

Hey everyone, I am new to this list, so first off hello. I am trying to get chirp running on my system. I am running Ubuntu 22.04, with all packages current. Chirp is installed via apt, as using snap or flat pack renders it inaccessible with Orca. The problem, when I download from my Baofeng Uv5r, I get an error that says module ‘collections’ has no attribute callable. Is anyone running Chirp successfully on Ubuntu 22.04? I know that Python 2 is no longer supported. Any help would be greatly appreciated. Thanks much in advance, Guy JAWS Certified, 2021, https://www.freedomscientific.com/Training/Certification

9 18

[chirp_users] Flatpak
by John KI4RO 02 Jun '22

02 Jun '22

I keep seeing references to this program but how I should use it is not at all obvious to me. I've tried asking it for help and even asked it for help with certain commands but none of it makes sense to me. I am not Linux literate by any stretch so please tell me step by step what to do. 73 John KI4RO.

8 21