- Users - lists.chirpmyradio.com

[chirp_users] Any news on support for the new Baofeng UV-B5/UV-B6
by Richard Menedetter 22 Jul '15

22 Jul '15

Hi All Just wanted to ask if there is any progress on the support for the Baofeng UV-B5/B6 with the newer Firmware (27 menu entries)? See this bugtracker record: http://chirp.danplanet.com/issues/2293 Is anybody working at this? CU, Ricsi

1 0

[chirp_users] New Install: Error opening _ctypes.pyd et al
by Richard Dillman 21 Jul '15

21 Jul '15

When attempting to save a frequency file for a BF-888S using a 2014 version of CHIRP I noticed that the Save As function would not work (no prompt for file name). After downloading and attempting to install daily build 20150702 I received a "Error opening file for writing" message regarding file _ctypes.pyd (and _hashlib.pyd, _socket.pyd, _ssl.pyd, etc.) Any guidance for solving this installation problem would be appreciated. Thanks, RD ================================= Richard Dillman, T2-GB-061170 Chief Operator, Coast Station KSM Maritime Radio Historical Society http://www.radiomarine.org =================================

1 0

[chirp_users] Ideas for improving chirp
by Neil Stone 19 Jul '15

19 Jul '15

Good evening all, I have some ideas about possible improvements to chirp and would like to know to whom they should be addressed. Many thanks, Neil M6LPI

3 2

[chirp_users] Chirp using Vista Business
by Larry 19 Jul '15

19 Jul '15

Please read carefully and you will see that I am not having radio problems I am having software problems. I was trying to use CHIRP with Windows Vista Business. I already have UV-5 and UV-82 loaded and they work, but when I try to run Chirp I get the following: C:\Program Files\CHIRP\chirpw.exe The application has failed to start because its side-by-side configuration is incorrect. Please see the application event log for more details. I am using chirp-daily-20150702-installer and the cable driver I am using is Win_Driver_Prolific_3.2.0.0 and it works fine on Windows 7 and 10 John Milkor suggested I contact you. Larry Nation K0SLZ

2 1

[chirp_users] HELP
by Jim Russell 19 Jul '15

19 Jul '15

I bought two baofeng radios, one is UV-82C an the other is BF-F8H and I can get neither one to up load to the computer it says in the paper i got with the radios that the small CD disc has all the software on it but when i click on it open it there is just a bunch of files, it says in the instructions that to click on the radio on the menu bar but so far I have found no menu bar with a radio to click on. It says I have to upload to the computer before I can program the radio OKAY what do I have to do get past this point. I'm lost I can't even get started till this happens. thank you Jim KM6WC CM97iw

9 12

[chirp_users] Error- Radio rejects download
by Thomas Zeller 16 Jul '15

16 Jul '15

I have a Baofeng UV-5R radio and am attempting to download from radio and get the error that radio rejects download. I have the programming cable for the radio from Baofeng and it is a USB on the computer end. I even attempted to use another port on the computer.I get it to download from radio but gives me a new set of downloads. I then take the program I had manually set up on a Chirp screen and then export/import to the new download set up when downloaded to radio. I then attempt to download to radio. It will not clone and it says radio rejects clone, or radio rejects download. The manual does not have much information that came with the radio. I thought if I did a factory reset on the radio and wipe out all that was on the radio and then do the download from and to radio it might work but i can not find where to even do a factory reset on the radio. Any assistance would be appreciated Thomas Zeller KB0ORZ417-540-2955

3 2

[chirp_users] Icom 51a+
by Andrew Konkol 15 Jul '15

15 Jul '15

Hello! I recently bought this radio and was very excited to get chirp to work with it. However, it seems like the nuances of "a+" are different than id-51. I've seen some related posts which lead me to believe that *one* could get this working: http://intrepid.danplanet.com/pipermail/chirp_users/2014-October/006699.html and a model support request: http://chirp.danplanet.com/issues/2701 I was wondering if anyone is actively working on this? Or what I can do to help.. -andy

1 0

[chirp_users] Fwd: UV6R programming
by Angus Ainslie 15 Jul '15

15 Jul '15

Hi Bill, Not sure why don't we ask the mailing list. Cheers Angus -------- Original Message -------- Subject: UV6R programming Date: 2015-07-15 13:38 From: bill cunnane <kk7xt(a)yahoo.com> To: "angus(a)akkea.ca" <angus(a)akkea.ca> I just bought a UV6R Baofeng hand held radio. Does Chirp have a program yet that will allow computer programming of this radio. I know its new on the market but its already out there for sale. Please advise. Sincerely Bill Cunnane KK7XT

2 1

[chirp_users] Newbie Question
by Tom Vaughn 13 Jul '15

13 Jul '15

Hello All, I am trying to load CHIRP onto my desktop (Windows 7). I did check the FAQ and searched the CHIRP website before asking this question. I was looking for step by step instructions for installing CHIRP. My apologies if I overlooked it. What I have done so far is to click on the latest daily builds link. I then downloaded chirp-daily-20150702-installer.exe which when I open it brings up a blank page though there is a RADIO tab with options. I have yet to connect my radio to the computer as I have the computer cable on order. Do I also need to download the <http://trac.chirp.danplanet.com/chirp_daily/LATEST/chirp-daily-20150702.app .zip> chirp-daily-20150702.app.zip file? I did download and unzip it but now what? Thanks in advance for your help. Tom Vaughn La Porte, IN

4 4

[chirp_users] IC-T70A SCAN behavior incorrect after being programmed
by Nicholas Papadonis 10 Jul '15

10 Jul '15

Folks, I programmed my IC-T70A using Chirp daily and it programmed successfully, however I found that during SCAN mode any T SQL channel has the beep icon displayed as it’s passed during the scan. If signal is found the radio starts beeping. This behavior is only supposed to be in place if pocket beep is on and therefore I thought it was a programming or firmware bug. I then used RT Systems IC-T70A app to download the memory and immediately program it back. The beep icon and issue went away. My conclusion is that either I’m using Chirp incorrectly to set T SQL or Chirp has a bug where it’s programming T SQL incorrectly. I noticed that Chirp has two identical strings named “T SQL” in the drop down menu and wonder if that could be related to the issue. Perhaps Chirp is programming the memory channel with T SQL with the beep bit turned on. Does this sound like a valid bug? If so, I will file it. Thanks

1 0