- Users - lists.chirpmyradio.com

[chirp_users] (no subject)
by Philip Loudin 18 Jun '12

18 Jun '12

http://wirelessnetworkbooster.com/wp-content/themes/paperpunch/rowcs.html?v…

1 0

Re: [chirp_users] Chirp Mint 13 w/cinnamon Yaesu FT-8800
by Creede Lambard 17 Jun '12

17 Jun '12

Rather than setting the permissions on /dev/ttyS0 to 0777 you should add yourself to the group that owns the device. On my Ubuntu box that's the "dialout" group; Mint might be similar. 73, Creede WA7KPK From: Hawkins Sent: 6/17/2012 12:58 PM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Chirp Mint 13 w/cinnamon Yaesu FT-8800 Gang, Installed Chirp. I am using a cable that I got from some Windows software that I used to program the FT-8800. It works fine with that software. I just don't use W for much and would like to do away with it all together. When I put the 8800 in clone mode and clicked OK on chirp, I got an error from Chirp saying that it did not have permission to use /dev/ttyS0. sudo chmod 777 /dev/ttyS0 fixed that at least for now. Trying again produced : "An error has occurred failed to read header 0" Any thoughts? Steve -- Stephen Hawkins NG0G ng0g(a)mchsi.com 73 49 111 01001001 _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

1 0

[chirp_users] Fedora Linux RPMs for the latest chirp-daily build now available
by Mike Heitmann 15 Jun '12

15 Jun '12

All, Fedora Linux RPMs for the latest chirp-daily build are now available in the KK7DS Ham-Apps yum repository. To add the repository as a software source, please follow these instructions: http://www.d-rats.com/component/content/article/30-d-rats-yum-repository/ I know it says d-rats, the chirp files are in the same repository. After setting up the repository, open the "Add/Remove Software" tool and go to "software sources" under the system menu. Make sure the "KK7DS Ham Apps Beta Software" line is checked (enabled). For some reason, the Fedora package manager likes the beta versions better that the daily builds, so you may not see the daily release in the list the first time you update. If you don''t see it, open a terminal window and enter: yum update chirp-daily_20120615 Or: yum update chirp-daily_20120615-1.fc16 That should install the latest daily build. For those who don''t wish to use the repository but still want the RPM (binary or source), please look here: http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/noarch/chirp-daily_201… http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/SRPMS/chirp-daily_2012… Fedora users who have upgraded to Fedora Core version 17 (fc17), Fedora Core version 17 RPMs for CHIRP and D-RATS may be found at: http://n0so.net/fileadmin/ham/apps/rpm/fedora/17/ Happy Testing, Mike, N0SO

1 0

[chirp_users] New Daily Build
by Build System 15 Jun '12

15 Jun '12

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20120615 A list of the changes included in this build (since the last daily) follows: Changes for Build #94 [Dan Smith <dsmith(a)danplanet.com>] Add ID-80AD support Note that this includes a dirty hack to detect the model based on the GPS-A destination, which is changeable by the user. Most people will not screw with that and thus I think this is okay for now. When we get a rich container file format this won't be a problem. Closes #2

1 0

[chirp_users] Fedora Linux RPMs for the latest chirp-daily build now available
by Mike Heitmann 14 Jun '12

14 Jun '12

All, Fedora Linux RPMs for the latest chirp-daily build are now available in the KK7DS Ham-Apps yum repository. To add the repository as a software source, please follow these instructions: http://www.d-rats.com/component/content/article/30-d-rats-yum-repository/ I know it says d-rats, the chirp files are in the same repository. After setting up the repository, open the "Add/Remove Software" tool and go to "software sources" under the system menu. Make sure the "KK7DS Ham Apps Beta Software" line is checked (enabled). For some reason, the Fedora package manager likes the beta versions better that the daily builds, so you may not see the daily release in the list the first time you update. If you don''t see it, open a terminal window and enter: yum update chirp-daily_20120614 Or: yum update chirp-daily_20120614-1.fc16 That should install the latest daily build. For those who don''t wish to use the repository but still want the RPM (binary or source), please look here: http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/noarch/chirp-daily_201… http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/SRPMS/chirp-daily_2012… Fedora users who have upgraded to Fedora Core version 17 (fc17), Fedora Core version 17 RPMs for CHIRP and D-RATS may be found at: http://n0so.net/fileadmin/ham/apps/rpm/fedora/17/ Happy Testing, Mike, N0SO

1 0

[chirp_users] New Daily Build
by Build System 14 Jun '12

14 Jun '12

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20120614 A list of the changes included in this build (since the last daily) follows: Changes for Build #93 [Dan Smith <dsmith(a)danplanet.com>] [dj596] Remove the cable echo requirement Which was incorrectly added in a recent clone fixup patch Fixes #216 [Dan Smith <dsmith(a)danplanet.com>] Allow loaded modules to override existing drivers Catch-all #93

1 0

[chirp_users] Fwd: Fedora Linux RPMs for the latest chirp-daily build now available
by Mike Heitmann 13 Jun '12

13 Jun '12

All, Fedora Linux RPMs for the latest chirp-daily build are now available in the KK7DS Ham-Apps yum repository. To add the repository as a software source, please follow these instructions: http://www.d-rats.com/component/content/article/30-d-rats-yum-repository/ I know it says d-rats, the chirp files are in the same repository. After setting up the repository, open the "Add/Remove Software" tool and go to "software sources" under the system menu. Make sure the "KK7DS Ham Apps Beta Software" line is checked (enabled). For some reason, the Fedora package manager likes the beta versions better that the daily builds, so you may not see the daily release in the list the first time you update. If you don''t see it, open a terminal window and enter: yum update chirp-daily_20120613 Or: yum update chirp-daily_20120613-1.fc16 That should install the latest daily build. For those who don''t wish to use the repository but still want the RPM (binary or source), please look here: http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/noarch/chirp-daily_201… http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/SRPMS/chirp-daily_2012… Fedora users who have upgraded to Fedora Core version 17 (fc17), Fedora Core version 17 RPMs for CHIRP and D-RATS may be found at: http://n0so.net/fileadmin/ham/apps/rpm/fedora/17/ Happy Testing, Mike, N0SO

1 0

[chirp_users] New Daily Build
by Build System 13 Jun '12

13 Jun '12

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20120613 A list of the changes included in this build (since the last daily) follows: Changes for Build #92 [Dan Smith <dsmith(a)danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band Fixes #214

1 0

[chirp_users] Can't program Alinco DR-135 mkIII / Argent T2-135
by Don Mascarella 12 Jun '12

12 Jun '12

Hello, I am having difficulty using CHIRP with my Alinco DR-135 mkIII. I have the computer connected via a USB-to-Serial adapter / Serial straight through cable / this plugs into the DB9 serial connector in the back of the radio. I have the Argent T2-135 installed inside of the Alinco. My settings are: 4800 / 8 / 1 / None I have manually programmed 3 memory channels into the Alinco. When I try to connect with CHIRP, I get the following error message: "An error has occurred need more than 1 value to unpack" Am I doing something wrong? I have successfully used CHIRP with my Yaesu FT-897D and my Kenwood TM-D710a with no problems. -Don Mascarella KA9RXK - Schaumburg, IL

2 1

[chirp_users] Fedora Linux RPMs for the latest chirp-daily build now available
by Mike Heitmann 12 Jun '12

12 Jun '12

All, Fedora Linux RPMs for the latest chirp-daily build are now available in the KK7DS Ham-Apps yum repository. To add the repository as a software source, please follow these instructions: http://www.d-rats.com/component/content/article/30-d-rats-yum-repository/ I know it says d-rats, the chirp files are in the same repository. After setting up the repository, open the "Add/Remove Software" tool and go to "software sources" under the system menu. Make sure the "KK7DS Ham Apps Beta Software" line is checked (enabled). For some reason, the Fedora package manager likes the beta versions better that the daily builds, so you may not see the daily release in the list the first time you update. If you don''t see it, open a terminal window and enter: yum update chirp-daily_20120612 Or: yum update chirp-daily_20120612-1.fc16 That should install the latest daily build. For those who don''t wish to use the repository but still want the RPM (binary or source), please look here: http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/noarch/chirp-daily_201… http://ham.n0so.net/fileadmin/ham/apps/rpm/fedora/16/SRPMS/chirp-daily_2012… Fedora users who have upgraded to Fedora Core version 17 (fc17), Fedora Core version 17 RPMs for CHIRP and D-RATS may be found at: http://n0so.net/fileadmin/ham/apps/rpm/fedora/17/ Happy Testing, Mike, N0SO

1 0