- Users - lists.chirpmyradio.com

[chirp_users] What help is there for non-programmer to learn Chirp and Python for Icom IC-2800H
by KB1ELE - Lee T. Davy 26 Aug '15

26 Aug '15

All, I sent to developer as well but maybe ask here as well. I have a circa 2000 Icom IC-2800H with virtual box XP on OS X for CS2800.exe cloning software. I am sucessfully downloading to ubuntu KBOIQ on old MacBook Laptop (64 bit) and maybe older HP 1125nr Netbook. I have been able to get memory sized and names in browser with skip bits mapped. I also figured that the memory frequencies are really weird to see in browser as hex. portmon, ICF and screen capture of CS-2800 are completed. Also attempted same on Icom IC-V8 with CS-V8, portman but no success with Chirp detecting or fake outs. What I have learned is in code at end of message. What I haven't learned is how to display in Chirps UI or how to decipher Python flow. Where should I go from here ? Radio is NOT available for loan. Visits or local (01450, USA) mentors are welcome though. MEM_FORMAT = """ struct { u16 freq; u16 freq1:4, freq2:3, unknown1:2, pskip:1, skip:1, unknown2:4; u16 offst:12, unknown3:4; u16 offst1:4, offst2:3, unknown4:4; u8 unknown5:2, rtone:6; char name[8]; } memory[232]; class IC2800Radio(icf.IcomCloneModeRadio): """Icom IC-2800H""" VENDOR = "Icom" MODEL = "IC-2800H" _model = "\x20\x47\x00\x01" _memsize = 4016 -- KB1ELE - Lee T. Davy <kb1ele(a)leetdavy.com>

2 1

[chirp_users] Baofeng UV-5r
by Marven Konzelman 24 Aug '15

24 Aug '15

Hi! I am a new subscriber to this list. Can anyone tell me if there is a daily build that works with the uv-5r, firmware Ver. NSR3409 BFP3-25 that will show the tree power levels. I found builds that work with my radio but they just show the high and low power levels. Thanks Marv VE4KE

4 5

[chirp_users] Install daily build
by KenB 22 Aug '15

22 Aug '15

I have down loaded the daily build and unpacked it into a folder named "chirp". What else do I need to do to install this in my PCLINUX OS? KenB KM4KKM

5 8

[chirp_users] Win 10
by Hubert Peery 21 Aug '15

21 Aug '15

Worked for me Hub W5GYX

1 0

[chirp_users] Re Repeater programming UV5R;
by Martin Goodrum 20 Aug '15

20 Aug '15

Hi All, I have now got the problem cracked. I had to set to “Tone” and not “TSql” for those two channels. Both now work OK. Thanks to Stan for pointing me in the right direction. Martin G3ZQU

1 0

[chirp_users] Programming IC-W32A
by Delbert Schmidt 20 Aug '15

20 Aug '15

I'm unable to find the correct page to start programming my HT. Can you HELP? Thanks........Del

2 1

[chirp_users] Fw: important
by clarket＠iol.ie 20 Aug '15

20 Aug '15

Hello! Important message, visit http://theunbreakableproject.com/considered.php?e clarket(a)iol.ie

2 1

[chirp_users] Chirp not communicating
by Verne Brown 19 Aug '15

19 Aug '15

Using Macbook Pro with OS 10.10.5 (Yosemite)Chirp 0.4.1Radio - Baofeng UV-5R I've been successful using older mac os' in communicating to this radio in the past I try to download the radio's program i get this error message "An error had occurredcould not open port /dev/cu.vernebrownscomputer-Blu:[Ermo 16]resource busy : '/dev/cu.vernebrownscomputer-Blu' Not sure what I'm doing wrong or forgot to do. did the cable check - it recognizes the type of chip in the cable as the debug instructions.

2 1

[chirp_users] Can I use chirp for icom radios
by Philip Mobile 19 Aug '15

19 Aug '15

Can I use chirp to program my icom 2720 or icom 2820? Thank you for your time, Philip Canterbury Sent from my iPhone

3 3

[chirp_users] repeater programming on UV5R
by Martin Goodrum 19 Aug '15

19 Aug '15

I am having a problem programming a couple of my local 70cm repeaters into my baofang UV5R. The problem is that I can access the repeater but although the repeater responds, as indicated by the green light being lit, I hear no audio. This is because R-CTCss is set to on. These two repeaters do not transmit a CTCss tone so I need to program R-CTCSS off on the radio but so far I have been unsuccessful in doing this! Manually loading the repeater into the radio it all works fine, just using a memory channel programmed with Chirp. It is just two repeaters that give probs. all others are OK. So question is how do I program the R-CTCss off for these two memory channels, but leave T-CTCss active of course. Martin G3ZQU.

2 1