- Users - lists.chirpmyradio.com

Re: [chirp_users] chirp_users Digest, Vol 122, Issue 7
by Ron Schaffner 12 Feb '19

12 Feb '19

Never mind. The latest version has seemed to correct the issue. Many thank to all that responded. 73 Ron-W8HBF Ron, Tell us: What operating system you are using. Windows XP, 7, 8, or 10, Mac, or Linux (Distribution). What Baofeng model you are using. What manufacturer of USB cable you are using. What CHIRP version are you running? Give us the full text of the error you are receiving and what you did immediately before receiving the error. Thanks, David N1EA On Thu, Feb 7, 2019, 16:09 Ron Schaffner <rschaffner1(a)zoomtown.com> wrote: > *I?m trying to program frequencies using my Baofeng, but it says I can > save certain ones.* > > > > *Anybody have a solution?* > > > > *Ron ? W8HBF* > > > > *rschaffner1(a)zoomtown.com <rschaffner1(a)zoomtown.com>* > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to D.J.J. Ring, Jr. at n1ea(a)arrl.net > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Can’t get Chirp to Load
by Ken 11 Feb '19

11 Feb '19

I can’t seem to get Chirp to load into my Hp Envy laptop running Windows 10. After researching the Internet and this forum, I have found references to the config file that supposed to be located in the debug file. Well, neither of those two are in my Chirp program. Has anybody seen this problem before and if so, how is it fixed?? I hope I am not asking a question that has been addressed already but I haven’t seen it in here. Thanks. Kenny KD4HQQ Sent from my iPhone 6S+

4 3

[chirp_users] Got Two More Friends Up and Running with CHIRP
by Pat Anderson 11 Feb '19

11 Feb '19

My friends just got new Baofeng UV-5Rs. Steve is a Windows 10 guy and Don is a MacBook Pro guy running Mojave. They both managed to get the program installed on their respective computers and get their radios programmed. Steve bought the FTDI cable from Baofeng Tech and Windows 10 automatically installed the drivers when he plugged the cable in. No more trying to fool Windows into thinking an out-of-date driver is OK, because the genuine cable was barely more expensive than the counterfeit cables! I spent about an hour with them running over CHIRP basics, especially that you HAVE to download an image from the radio you want to program, edit it, save it, and then upload it back to the same radio from which it was downloaded. Don got his Mac going after I left, so I don't know if he in fact downloaded the Mac driver from mac-usb-serial.com I suggested or if Mojave likewise automatically installed drivers, as he had the authentic FTDI cable as well. I have a counterfeit Prolific, which works great on my Chromebook with Ubuntu, but I needed the purchased driver to get a serial port on my ancient MacBook Pro with High Sierra (it is too old and lame to run Mohave, so it limps along with High Sierra and a lot of spinning beach balls!). Anyway, two more fans in the CHIRP world!

2 1

[chirp_users] Yaesu FT-450D
by Farren Constable 11 Feb '19

11 Feb '19

I'm not getting chirp to communicate with my Yaesu FT-450D and I'm suspecting it's a baud rate issue. My 450D is at the factory default of 4800 baud, and I don't know what chirp uses by default or how to change it's default. I have no problem changing the radio to match what chirp is expecting, but I'd rather not do it by trial-and-error.... So, can anyone tell me what baud rate chirp is using? Thanks! -Farren / KB0AZJ The Computer Shed Business Computer Services 785.747.8100

2 2

[chirp_users] New Daily Build
by Build System 11 Feb '19

11 Feb '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190211 A list of the changes included in this build (since the last daily) follows: Changes for Build #553 [Dan Smith <dsmith(a)danplanet.com>] Remove old win32 build scripts that are not used anymore and likey no longer work #0 [Dan Smith <dsmith(a)danplanet.com>] Include chirp.ico in the manifest so win32 build can happen from sdist #0 Changes for Build #554

1 0

[chirp_users] Chirp installation problems was: New Daily Build - Reload
by D.J.J. Ring, Jr. 10 Feb '19

10 Feb '19

On Windows and Linux you can just install right over the previous installation. Someone said this isn't true on Mac computers, but I know it's true for Windows and Linux which I use. 73 David N1EA On Sun, Feb 10, 2019, 17:59 John LaMartina <JohnLa(a)usa.net> wrote: > Gentlemen, can I please suggest that the Subject Line of this thread be > changed from New Daily Build to something more closely related to the > discussion. > > As for the new version of CHIRP, no need to delete the old version of > CHIRP. The Latest Daily Build will overlay the old version. > > John > Miklor.com > > > On Feb 10, 2019, at 2:11 PM, Scott Raines <TRUCK28ENG(a)live.com> wrote: > > David, > You are most certainly a gentleman and a scholar Sir. I can’t tell you > how much I appreciate your help here. While I’ve been around computers for > years, I’ve really not improved on my navigation skills and user abilities > much for quite a while. I get on, look around, check a forum or two or > three, maybe manipulate a picture or two and that’s about it. So, learning > from folks like you is certainly a privilege. > > Now, may I ask. If I have say, oh, maybe a 2-3 day old version of Chirp > and, really haven’t done much with it in terms of altering my radios, and, > I've been informed just today (via me logging into Chirp this morning) that > there is a new version of it, can I delete the entire Chirp from my > computer and install the latest version and, go from there in creating > back-ups, memories, and all that? > Scott > > Sent from Windows Mail > > *From:* D.J.J. Ring, Jr. <n1ea(a)arrl.net> > *Sent:* ‎Sunday‎, ‎February‎ ‎10‎, ‎2019 ‎12‎:‎55‎ ‎AM > *To:* chirp_users(a)intrepid.danplanet.com > > Scott, > > When you download from the radio, save the file (under File on the > menu, Save). This is the img file. Keep it as a prudent back up. > > Then EXPORT (under File on the menu, export) it exports as a csv file > which LibreOffice can open. > > Then use LibreOffice to open the file. Don't use Microsoft, it will > cause problems because it adds commas where they should not be. ONLY > use LibreOffice. If you don't have it download here: > https://www.libreoffice.org/download/download/ > > If you have another radio that is supported by CHIRP, you use > LibreOffice to copy the frequencies between the different radios. > That is you use the csv file as a common denominator for both radios. > You can use Control-C to copy and Control-V to paste the channels you > want to copy from one spreadsheet to the other spreadsheet. > > Don't forget to save the spreadsheets after changing them. > > 73 > David N1EA > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Scott at truck28eng(a)live.com > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to John LaMartina at johnla(a)usa.net > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to D.J.J. Ring, Jr. at n1ea(a)arrl.net > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] New Daily Build
by Build System 10 Feb '19

10 Feb '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190209 A list of the changes included in this build (since the last daily) follows: Changes for Build #551 [Dan Smith <dsmith(a)danplanet.com>] Also make ft7100 not claim that its sub devices have sub devices This was making run_tests fully _skip_ it by drilling through all the sub devices to an empty list. #6259 [Dan Smith <dsmith(a)danplanet.com>] Fix get_sub_devices() for ft7100 The sub devices should not return more sub devices. This was causing run_tests to go into an infinite loop. #6259

11 22

[chirp_users] Thanks to all
by Scott Raines 10 Feb '19

10 Feb '19

Gents, I recently joined this Chirp system and had a question pertaining to my issue of loading Chirp. I was having difficulty loading it. I must say, I received quite a few nice emails from GREAT folks on here trying to assist a complete stranger in this dilemma. This is great! I’m very, very much appreciative of this. I surely want to thank the administration of Chirp to allow for this “help” system to exist. Scott Sent from Windows Mail

1 0

[chirp_users] New Daily Build
by Build System 10 Feb '19

10 Feb '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190210 A list of the changes included in this build (since the last daily) follows: Changes for Build #552 [Dan Smith <dsmith(a)danplanet.com>] Fix icx8x driver model detection This regressed when the raw mode was added to the icf base driver. Fixes #5991

1 0

[chirp_users] Trouble loading Chirp on a laptop
by Scott Raines 09 Feb '19

09 Feb '19

Folks, I finally got authorized to send emails here. Well, in my previous email(s), I stated I’m having issues loading Chirp. I’ve tried and tried and, it just won’t load. I followed all the instructions and all I get is the Chirp.exe. file. If I click on that, it (the supposed download) starts all over again. When I click on the part that’s highlighted, “Windows users will need the latest version”, I don’t get on the next screen what youtube instructors are showing what should appear. They get, at the bottom of the screen, a text bar that runs across the bottom saying: Run, save, and if you click on a down arrow, you’ll see “Run AND Save”. I don't get that bar. I also don’t get the small text block in the middle of the screen that wants info on “com port”, radio type etc. Gang, I need help here. Everyone else seems to load Chirp just fine. What am I doing wrong? Scott Sent from Windows Mail

10 16