- Users - lists.chirpmyradio.com

[chirp_users] TYT TH-9800power levels
by Glenn At Home 17 Feb '19

17 Feb '19

Hi, I tried importing a CSV file from my Baofeng into my new radio, the TYT, and after importing it, I read that all the power levels are on low. I noticed that I could use the properties to change it, but that is a lot of fields to do that to. When I open that CSV file in Excel, it shows that field as a 5 if I'm reading the correct field. If that is not the field, then the field with the power is not showing up in Excel. Also, while importing it, it encountered an error on line 160, but that is just one of the CB frequencies I put in, but it is not the first field, it is about half-way through the CB frequencies, I don't know what that is about. Thanks for any thoughts. Glenn Sent From My Tabletop

3 4

[chirp_users] New Daily Build
by Build System 17 Feb '19

17 Feb '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190216 A list of the changes included in this build (since the last daily) follows: Changes for Build #556 [Dan Smith <dsmith(a)danplanet.com>] Fix Edges::do_oddsteps() test This test was completely wrong, and not really running for any driver. Realized it was doing something stupid while trying to run it against the CSV driver (which supports DC->daylight). Some radios were claiming to support steps they don't support because they were taking the full list in chirp_common as a default, which is clearly wrong. This patch changes the default to a very conservative set, which may cause some drivers to no longer accept some frequencies that may be valid because they were not declaring their real supported list. This also uncovered at least one buggy driver that can't support anything other than 5kHz step frequencies (ic2730). Found in the pursuit of #495

2 1

[chirp_users] BF-888S Language/Step Problem
by Richard Dillman 17 Feb '19

17 Feb '19

I've been happily using CHIRP to program BF-888S radios but today I ran into a problem with the language and frequency step entries (I'm using CHIRP daily-20190217). o When using my stored .img file for the BF-888S the frequencies upload correctly but the voice announcements are in Chinese even though English is selected in Settings. o When trying to manually enter a frequency ending in, for example, .5875, into an .img file, an error message appears stating "Error setting memory: Tuning step 12.50 not supported, Frequency requires 12.50kHz step". I've never run into either of these problems before and would be grateful for any advice and guidance. Thanks, RD ========================= Richard Dillman =========================

1 0

[chirp_users] Programming Wouxun KG-UV2D
by tuvok 17 Feb '19

17 Feb '19

Hello, is this Possible, for programming the Wouxun KG-UV2D Radio with chrip? I have a Windows 10 System and have buy a USB Cable but i have no idea why is the UV2D not on the list.. a Friend have say me .. in a Old version he have found this Radio Can anybody help me? -- Grüße Markus Mail: tuvok(a)shell-flughafen.de Web: http://www.discoteam-excalibur.de

7 25

[chirp_users] Can Chirp be used to program Motorola RDV2020
by David 17 Feb '19

17 Feb '19

Hello everyone, Not sure if my question went out to the list or not. I have Motorola RDV2020 and wanted to know if Chirp can program it. Thanks for your help. David

3 2

[chirp_users] wouxun KG699E (66-88MHz)
by Francesco Tamburro 17 Feb '19

17 Feb '19

I would like it if CHIRP could program the WOUXUN KG-699E (66-88 MHz). Is the implementation of this radio planned? Many thanks in advance.

2 2

[chirp_users] New Daily Build
by Build System 17 Feb '19

17 Feb '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190217 A list of the changes included in this build (since the last daily) follows: Changes for Build #557 [Dan Smith <dsmith(a)danplanet.com>] Fix unittest adapter class The adapter was ignoring tests that collect and return multiple failures at once, so any CopyAll failures were ignored. This makes the adapter just pick off the first one and raise it. Found while reviewing the driver for #4787

1 0

[chirp_users] uv 5001
by william 16 Feb '19

16 Feb '19

howdy from new mexico usa used chirp for years, thanks to all.....when i find the gold, you WILL get your share........ my uv btech 5001 will accept channel programming. but it shows me no setting data or the ability to program setting data. current chirp build. please help.... thanks much william

3 2

[chirp_users] Yaesu FT-847 programing
by Kevin 16 Feb '19

16 Feb '19

Will chirp program the Yaesu FT-847? I'm willing to loan my FT-847 to someone to write the code if needed, if close to Portland , Oregon ( Short driving distance )Thanks for your time.Kevin, KI7MOC

1 0

[chirp_users] Install File
by Dennis Wage 15 Feb '19

15 Feb '19

Can you think of any reason why, after installing this mornings release of Chirp, I cannot delete the .exe file from \Downloads\? Tried from explorer and cmd prompt. Dennis M. Wage (W9BOQ) 245 Corum Hill Road Castalian Springs, TN 37031 (615) 310-4242 Cell (615) 562-5128 Home http://hammondb3organ.net http://overdubs.net

2 4