- Users - lists.chirpmyradio.com

Re: [chirp_users] Programming Yaesu Radios using CHIRP
by chirp.cordless＠xoxy.net 04 Apr '19

04 Apr '19

Well there's some truth there, but what truth I'm aware of should not scare anyone off from using chirp with Yaesus. Back in early 2014 I was doing some chirp code development on FT-60s, fixing some bugs and with the eventual goal of adding "Settings" control. Someone else has since done that. Part of that process is mapping the memory by twiddling bits in the image, uploading to the radio, and seeing through the radio's button interface what changed. It went pretty smoothly for a while, then I managed to brick *TWO* FT-60s. One of which was repaired by sending it to the factory to replace an eprom. I'm not going to add any further detail here, my investigation was pretty thoroughly documented in a thread on the chirp_devel mail list with subject "How to brick an FT-60" starting 3/22/14. See also Bug #1547: [FT-60] Chirp should check parity on download. But normal use of chirp to program radios doesn't do this. The user interface only lets you make limited, well understood changes to the radio image bitmap. I still do that with mine. -dan > Date: Wed, 27 Mar 2019 22:05:06 -0600 > From: Larry Lovell <larry.lovell76(a)gmail.com> > Subject: [chirp_users] Programming Yaesu Radios using CHIRP > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > > Has anyone had a problem programming a Yaesu radio with CHIRP? > Someone mentioned that their Yaesu was damaged and had to be sent to the > factory because CHIRP had overwritten some code controlling the processor. > It also had to be re-flashed. > Since I don't fully understand how CHIRP works this doesn't make sense to > me, but knowing manufacturing companies, they may share Channel Memory with > processor memory and not think much about it. > Thanks for your information.

10 11

[chirp_users] MDF-A and B
by James Corbin 02 Apr '19

02 Apr '19

How do I switch my Baofeng PC03 from frequency to name? When I go to 21 and 22 for the name, it still only shows frequencies. -- James Corbin

8 14

[chirp_users] Having Receive only on some channels on Baofeng UV-5R + Plus
by Michael Alecksynas 24 Mar '19

24 Mar '19

Hi All, Thanks for Reading. I just programmed up a UV-5R+ Plus for a friend of mine and that worked out good with the Chirp program but there are some Frequencies that I would like to have Receive only on the radio. I went through the program and I didn't see anything listed to do so. Did I overlook it or does this program not have that feature??? Thank you very much in advance for your response back. Mike N2JVENiverville, New York

4 5

Re: [chirp_users] Radio did not respond Baofeng UV-82
by sam walton 22 Mar '19

22 Mar '19

Thank for your help. ls -l /dev/ttyUSB0 (as my regular user) crw-rw—— 1 root dialout 188, 0 Mar 22 00:21 /dev/ttyUSB0 groups sam adm dialout cdrom sudo dip plugdev lpadmin sambashare thx, sam kk4jzh > On Mar 22, 2019, at 2:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > > Sam, > > Please do this: > > ls -l /dev/ttyUSB0 > > Send back the output. > > Also send back the output of this when you are using your user (regular) > account: > > groups > > It is important that you are in the group that owns /dev/ttyUSB0 > > I'm not using Ubuntu but Arch Linux, but here is my output to show you: > > ls -l /dev/ttyUSB0 > crw-rw---- 1 root *uucp* 188, 0 Mar 21 09:40 /dev/ttyUSB0 > > [djringjr@n1ea ~]$ groups > video *uucp* wheel djringjr > > I've made *uucp *bold so you can see the important part. > > I believe /dev/ttyUSB0 in Ubuntu is owned by root tty - don't change it! > Just make sure you are a member of whatever group that owns /dev/ttyUSB0. > > Different distros handle devices slightly differently. The point is that > if you are executing CHIRP and you are not a member of the group that owns > the /dev/ttyUSB0 device, it will not work. > > To add a user to a group - whatever group owns the ttyUSB0 - > > sudo adduser user group > > Where user is your user name and group is the group that owns ttyUSB0 > > > 73 > DR > N1EA

3 2

Re: [chirp_users] Radio did not respond Baofeng UV-82
by sam walton 21 Mar '19

21 Mar '19

Thank you, did that, and used the ppa. Regardless, sudo apt-get remove chirp-daily, but left the Python libraries. Used wget to get today’s daily. Under the Help menu, it displays CHIRP daily-20190321 I have enabled the developer functions. I’ve tail -f /var/log/syslog to find any info. It shows what dmesg output when the cable was inserted. Unsure what troubleshooting steps to try next, thx, sam kk4jzh > On Mar 21, 2019, at 2:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > > On Wed, Mar 20, 2019 at 3:21 PM sam walton <sam(a)foofrancine.com <mailto:sam@foofrancine.com>> wrote: >> >> Yes, thx. >> >> Ubuntu 14 xfce >> >> chirpw -v returns version 4.0.0-RELEASE which has a date of 12/21/2013 >> That?s alarming, so I apt-get update and reinstalled chirp-daily >> In terminal, it unpacks to 20190319-trusty over the one I installed from last week. >> >> Is this the version number? If not, how to get the info needed?, sam kk4jzh >> >> On Mar 20, 2019, at 2:00 PM, chirp_users-request(a)intrepid.danplanet.com <mailto:chirp_users-request@intrepid.danplanet.com>wrote: >> >> Sam, >> >> Tell us what operating system you are using, and which version of CHIRP. >> >> Also include your callsign with your signature. >> >> Regards, >> >> David >> N1EA > > That's the problem. You are running a very, very old version of CHIRP. > You must uninstall it and then install the latest daily build from the > snapshot repository as shown on the download page and the "Running > Under Linux" page. > > Jim KC9HI

4 3

[chirp_users] New Daily Build
by Build System 21 Mar '19

21 Mar '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190321 A list of the changes included in this build (since the last daily) follows: Changes for Build #573 [DanClemmensen <DanClemmensen(a)gmail.com>] [ft4] restrict vfos to their bands [#6625] Fixes: #6625 [DanClemmensen <DanClemmensen(a)gmail.com>] [ft4] fix errors in charset [#6605] Fixes: #6605 [DanClemmensen <DanClemmensen(a)gmail.com>] [ft4] retry if errors on serial port [#6623] Fixes: #6623 (NOTE: tested the clone-mode retries. Did not test the checksum retries, but it cannot be any worse than is was without them. download and upload still work just fine.) [Dan Smith <dsmith(a)danplanet.com>] [run_tests] Add a clarifying comment about duplex==off handling in compare_mem Related to #6615 [DanClemmensen <DanClemmensen(a)gmail.com>] [run_tests] allow force to receive-only [#6615] Fixes: #6615

1 0

Re: [chirp_users] Radio did not respond Baofeng UV-82
by sam walton 20 Mar '19

20 Mar '19

Yes, thx. Ubuntu 14 xfce chirpw -v returns version 4.0.0-RELEASE which has a date of 12/21/2013 That’s alarming, so I apt-get update and reinstalled chirp-daily In terminal, it unpacks to 20190319-trusty over the one I installed from last week. Is this the version number? If not, how to get the info needed?, sam kk4jzh > On Mar 20, 2019, at 2:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > > Sam, > > Tell us what operating system you are using, and which version of CHIRP. > > Also include your callsign with your signature. > > Regards, > > David > N1EA

2 1

[chirp_users] Radio did not respond Baofeng UV-82
by sam walton 20 Mar '19

20 Mar '19

I have searched and tried all the troubleshooting steps I can find online. I’ve made many attempts to get the chirp software to clone my Baofeng UV-82L. This is the latest. I’ve bought a second cable that seemed to be recommended by Miklor. Installed the latest chirp onto Ubuntu xfce. When I connect the cable into USB I see this via dmesg usb 1-2: new full-speed USB deice number 6 using ohci-pci New USB device found, idVendor=la86, idProduct=7523 New USB device strings: Mfr=0, Product=2, SerialNumber=0 Product: USB2.0-Serial ch341 1-2:1.0: ch341-uart converter detected usb 1-2: ch341-uart converter now attached to ttyUSB0 That suggests to me that the computer recognizes the cable correctly and is assigned to USB0. Please correct me if I’ve made the wrong assesment. After booting the chirpw program I have connected the other plug into the two ports of the radio, turned on the radio, turned the sound up. Set to the upper band. Selecting USB0 Baofeng UV-82L Terminal reports Clone failed: Radio did not respond. I have done every possible way to wrench that plug into the radio to see if it can possibly connect on each attempt to get it to initially clone. Perhaps there’s something wrong with this three-year-old radio? There is no debug.log in my home .chirp directory, just config files. thx, sam

2 1

[chirp_users] UV-5R Programming
by Todd Silk 20 Mar '19

20 Mar '19

The VIP software will read and write the parameters on the other screen. Chirp however still does not read. Will try the new build tonight Thanks for the help. Todd AD7VB Date: Tue, 19 Mar 2019 04:53:50 -0400 From: Jim Unroe <rock.unroe<http://rock.unroe>@gmail.com> Subject: Re: [chirp_users] UV-5r programing To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U6GGiSmEbe7Y43A0O+nRG6VLQR8M8xL1vT5oES0MFOZ1A(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" > Ok Will this help Jim? > > Could not find this screen in the OLD_NEW version of the VIP software but one of the other ones had it. Yes. This is the screen. Click the [Read] button and report back if there is an error or not. Thanks, Jim KC9HI Get Outlook for Android<https://aka.ms/ghei36>

4 4

Re: [chirp_users] UV-5r programing
by Todd Silk 19 Mar '19

19 Mar '19

Hi Jim, The VIP software will read and write to the other screen it is just Chirp that does not work. Will try the new build tonight. Thanks for your help Todd AD7VB Get Outlook for Android<https://aka.ms/ghei36>

2 1