- Users - lists.chirpmyradio.com

[chirp_users] Transmit UV5r to FRS
by Todd J. Unkefer 24 Jun '19

24 Jun '19

I can hear the FRS radios on their respective channels, I cannot transmit on those respective channels. How can I enable the transmit on chirp? Thanks, in advance. Todd

14 18

Re: [chirp_users] Transmit UV5r to FRS
by JOCK SOUTAR 23 Jun '19

23 Jun '19

The UV5R is illegal on FRS. The reason is because they are not type accepted. Main reason is because the antenna can be removed and replaced with other antennas. FRS radios have fixed antennas. Jock On Thursday, June 20, 2019 Glenn At Home <chirp_users(a)intrepid.danplanet.com> wrote: Let's not play police here.I do believe that the FCC has allowed some of the FRS frequencies, now up to 2 watts.To answer the question, make sure the same frequencies are in the column next to the receive column.I don't recall if they are labeled RX and TX or what.Glenn From: John Wuest Sent: Thursday, June 20, 2019 3:42 PMTo: Discussion of CHIRP Subject: Re: [chirp_users] Transmit UV5r to FRS Using your UV-5R on FRS frequencies will be a violation of Federal Law. That radio is not, nor can not be, type accepted for that service. On Thu, Jun 20, 2019 at 4:25 PM Todd J. Unkefer <tunkefer(a)gmail.com> wrote: I can hear the FRS radios on their respective channels, I cannot transmit on those respective channels. How can I enable the transmit on chirp? Thanks, in advance. Todd _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John Wuest at jhwuest(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com_______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] UV5R "Variant" Programming Question
by N8GLS 21 Jun '19

21 Jun '19

Bought this UV5R (UV5R7W) at the Hamvention this past May. So, aside from this HT having a receiver front end that's susceptible to harmonics from DC to Daylight (yes have played with the squelch, wish it had a harmonic elimination button.hi hi), programming with Chirp is relatively easy. However, the Chirp programmer only seems to support a High or Low power level setting but this radio has three, High (7w or 8w depending on what document your looking at), Mid (4w or 5w), and Low (1w). In researching the UV5R I find this radio is steeped in a hodge-podge of variations, many un-documented, that seem to make it impossible to determine what I have. So, what I know is this is a UV5R7W, the 7w (or is it 8 ??) with three power levels High, Mid, Low. The firmware (holding #3 while powering on) is BFB298, Chirp Daily in "Other Settings" is returning for Firmware Msg 1, HN5RV01, and 1 for Firmware Msg 2. Don't understand why the two firmware numbers but makes me question which witch is which, especially when I search and find different spec's and documentation for each. So, is the UV5R model in Chirp the one to use ?? I think there is a VP programmer on the CD that came with the radio, is that a better choice, although there are a bunch of programs on that CD that appear to me to have nothing to do with this particular model..again a mystery with the lack of any supporting documentation, not even a readme. Any advice or sharing of knowledge would be appreciated !! Started searching the archives but thought since this radio was relatively new (I assume anyways) that someone else may have already been down this path. I know you get what you pay for, just want to give this a fair shot before repurposing this to be a service band and NWS monitor. Thanks, 73 de Brad, N8GLS

4 5

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 15
by Bill Stewman 20 Jun '19

20 Jun '19

Jim KC9HI and all other jenerous responders, Thank you All for your inputs... Jim seems to have the most practical solution to my situation. THANK YOU VERY MUCH! I plan to pursue this recommended path and hopefully be able to accomplish my goal of sharing details about a large spreadsheet file of 2,000+ lines with hundreds of my fellow North Texas Church Hams. 73 Bill Stewman - W5RQR -- * IF you forward ANY emails --* * Please delete all of the OTHER recipients * * BEFORE hitting ENTER.* *ONward & UPward* *Bill Stewman - W5RQR **Cell Phone **678-414-2500* *8048 Cool River Dive **Home Phone **469-731-5144 * *Frisco, Texas 75036* *“If ye are prepared, ye shall not fear.”* * “When the time to act arrives, **the time to prepare has passed”* *"Hard work spotlights the character of people: * * some turn up their sleeves, * * some turn up their noses, and * * some don't turn up at all" - Sam Ewing* On Thu, Jun 20, 2019 at 2:04 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. How can I use Chirp to re-use One Master File for multiple > Radio Brands & Models? (Bill Stewman) > 2. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (James Keener) > 3. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Christopher Knowles) > 4. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Christopher Knowles) > 5. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Amnon Zohar) > 6. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Christopher Knowles) > 7. Re: How can I use Chirp to re-use One Master File for > multiple Radio Brands & Models? (Jim Unroe) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 20 Jun 2019 09:30:58 -0500 > From: Bill Stewman <bill.stewman(a)gmail.com> > Subject: [chirp_users] How can I use Chirp to re-use One Master File > for multiple Radio Brands & Models? > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CAKfvv_msKJZ5_EOXujys=ANsV0hhFAvXEeeOC8O4= > TSxmKLzuA(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > How can I use Chirp to re-use One Master File for multiple Radio Brands & > Models? > > Our Church in Northeast Texas has over 400 licensed hams with various > brands & models of Ham Radios. > Is there some way for me to build One Master file of Repeaters that > everyone can use to put all of us on the same ones? > > Thanks > Bill Stewman - W5RQR > The Church of Jesus Christ of Latter-day Saints > Carrollton Storehouse Volunteer and Ham Radio Station Operator > > -- > * IF you forward ANY emails --* > * Please delete all of the OTHER recipients * > * BEFORE hitting ENTER.* > > *ONward & UPward* > > *Bill Stewman - W5RQR **Cell Phone **678-414-2500* > *8048 Cool River Dive **Home Phone **469-731-5144 * > *Frisco, Texas 75036* > > *?If ye are prepared, ye shall not fear.?* > * ?When the time to act arrives, **the time to prepare has passed?* > *"Hard work spotlights the character of people: * > * some turn up their sleeves, * > * some turn up their noses, and * > * some don't turn up at all" - Sam Ewing* >

1 0

[chirp_users] new update causes saved frequency 1 to populate all frequency windows
by Todd J. Unkefer 16 Jun '19

16 Jun '19

I just updated to the new version of chirp today, 16JUN2019. I download saved from radio, edit saved, upload to radio, as I have done 100 times or more. I have 20 saved. I deleted #1, then all frequencies changed to match my 2nd saved frequency. No matter what my first saved frequency is, it overrides all other frequencies in saved and changes ALL frequencies to match what is in the first saved frequency box. The name label fields don’t change at all, but the frequency field does. What can I do to stop this override so all boxes don’t populate with the same frequency? This is maddening.

2 1

[chirp_users] Anytone 5888 Gets Frequency Step Error
by Charles Hargrove 14 Jun '19

14 Jun '19

I am reprogramming my 5888 after two years. I have been able to use CHIRP in the past, but now the last few versions (6/1 and prior) throws up an error whenever I try to edit a frequency with 4 digits after the decimal. "Error setting memory: Frequency requires 12.50kHz step" I know that a bug report was filed by someone recently, but I would like to know if the issue is being looked at. I can not tell you what version did work as I update as soon as the new one is released. The last time that I programmed the 4 digit frequency was in the summer of 2017. -- Charles J. Hargrove - N2NOV NYC-ARECS/RACES Citywide Radio Officer/Skywarn Coord. NYC-ARECS/RACES Nets 449.025/123.0 PL ARnewsline Broadcast Mon. @ 8:00PM NYC-ARECS Weekly Net Mon. @ 8:30PM http://www.nyc-arecs.org NY-NBEMS Net Saturdays @ 10AM & USeast-NBEMS Net Wednesdays @ 7PM on 7.036 Mhz USB (alt 3.536)/1500 hz waterfall spot; MFSK-16 or 32 "Information is the oxygen of the modern age. It seeps through the walls topped by barbed wire, it wafts across the electrified borders." - Ronald Reagan "The more corrupt the state, the more it legislates." - Tacitus "Molann an obair an fear" - Irish Saying (The work praises the man.) "No matter how big and powerful government gets, and the many services it provides, it can never take the place of volunteers." - Ronald Reagan

1 0

[chirp_users] Yaesu FTM-400
by Fugawee 13 Jun '19

13 Jun '19

So I finally found a need to subscribe to the list. Excellent program working fine on most of my radios. Question is now,Is there any way to open Yaesu's FTM-400 .dat file and edit it? (MEMFTM400D.dat) I have copied the file from the SD card to the computer and tried various radios to open file, of course none worked. Any hints here or an I relegated to buying the RT software? Thanks Much! /John <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

4 4

[chirp_users] Mac IC80AD RTSytems Cable
by Chip Griffin 11 Jun '19

11 Jun '19

I’m getting an "AttributeError: 'Serial' object has no attribute ‘get_payload’” error when I try to read from my Icom IC-80AD. It’s instantaneous to when I start. I’ve looked at drivers and can’t find the alleged Apple FTDI driver. When I look in the directory IOUSBFamily.ktext I only see the following options: AppleLegacyUSBAudio.kext/ IOUSBCompositeDriver.kext/ IOUSBHIDDriverSafeBoot.kext/ AppleUSBLegacyHub.kext/ IOUSBHIDDriver.kext/ IOUSBLib.bundle/ AppleUSBMergeNub.kext/ IOUSBHIDDriverPM.kext/ IOUSBUserClient.kext/ When I do a $ ls /dev/cu* I see: /dev/cu.Bluetooth-Incoming-Port /dev/cu.usbserial-RT3P07W9 I’ve tried both. Bluetooth doesn’t even come close to happiness and the RT3P07W9 one gives me the above error. I do have the KK7DS stuff installed, even tried installing it a second time to be sure. I also tried on my Vista machine with even more pathetic results. -- Chip

3 2

[chirp_users] missing libxml2 Debian MX
by Galen Thurber 11 Jun '19

11 Jun '19

# python chirpw Traceback (most recent call last): File "chirpw", line 24, in <module> from chirp.drivers import * File "/home/galen/chirp-daily/chirp/drivers/generic_xml.py", line 17, in <module> import libxml2 ImportError: No module named libxml2 libxml2 is installed what am I missing? -- Hi I've been on-line since late 1992. I'm a: Skeptic, Secular Humanist, Bright R.I.P. Reject Identity Politics My computer recommendations: MX Linux <https://mxlinux.org/i> operating system, Passwordsafe <https://www.pwsafe.org/>, Pidgin Internet Messenger, tor anonymous browsing bundle. ALERTS: Fact or fiction <http://snopes.com>? SCAM <http://quackwatch.com> Supplements Complimentary Alternative Medicine These companies have unjustly life-banned me: Eastlink, Facebook,Yahoo!, Microsoft Chat XMPP: galen(a)jabber.at

2 5

Re: [chirp_users] chirp_users Digest, Vol 126, Issue 8 Message: 4
by Christopher F. Beesley 10 Jun '19

10 Jun '19

That's not right John. You can hear FAX data if you know where to look, you can hear Packet Radio, and you can hear computer programs if you've still got a home computer from the 80's. They, and others, are all serial data and as you can hear them then they must be in the audio spectrum. Closer to our homes as Radio Amateurs, even Morse Code is a form of serial data. Most of it can be controlled by a volume control as fitted to cassette players, CW receivers, and Packet Radio transmitters and receivers. If the volume control was turned down to zero, you wouldn't hear anything from any of them. Nor would the computer, the TNC or the FAX machine. Which is all very well, but I'm inclined to believe the people who say that the data in/out connectors on hand-helds don't use the audio channels (speaker and microphone) because a) its an obvious way to ensure data coms reliability, and b) its the way I would do it. But... The accountants would argue that the two extra terminals fitted to each of several million radio sets would amount to millions of yen in lost profit. So the early versions might be as designed by the engineers, i.e. two distinct interfaces (audio and data) but the later versions might be made to the lower specification as defined by the accountants. I can therefore see a case where, if you've got a later version, you would need to adjust the volume control when programming the memories. Two solutions: a) make sure your manual applies EXACTLY to the model you've got, especially if bought second-hand, and b) experiment. I'm sure other solutions are available from a variety of sources. Message: 4 Date: Sat, 8 Jun 2019 20:53:01 -0400 From: John Kemker <kemkerj3(a)gmail.com> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CA+r6kYQu-CNcRGVpdJ0AYbF1rtFhfUx+CxG8ft4bN4FRvORe0g(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" exactly The data is serial data, which is not in the audio spectrum. There's no "modem" on either end of the cable. It's straight RS-232C data as might come out of the back of an older PC. Volume has nothing to do with it, as it's either "on" or "off." ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: 10 June 2019 19:00 To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 126, Issue 8 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: chirp_users Digest, Vol 126, Issue 7 (jeff riddlebaugh) 2. Re: chirp_users Digest, Vol 126, Issue 7 (Glenn At Home) 3. Re: chirp_users Digest, Vol 126, Issue 7 Chirp (Gary Craig) 4. missing libxml2 Debian MX (Galen Thurber) 5. Re: missing libxml2 Debian MX (Barry Jackson) 6. Re: chirp_users Digest, Vol 126, Issue 7 (Jim Unroe) 7. Re: missing libxml2 Debian MX (Barry Jackson) 8. Re: BF888 Settings tab items not saved (George Reywer) ---------------------------------------------------------------------- Message: 1 Date: Sun, 9 Jun 2019 19:22:56 +0000 From: jeff riddlebaugh <jeff630(a)live.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 126, Issue 7 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <DM6PR19MB3339D1A03CAEB4EBD031E86799120(a)DM6PR19MB3339.namprd19.prod.outlook.com> Content-Type: text/plain; charset="windows-1252" I cant get any good programing software to work. I downloaded it from Baofeng website for my UV-5R and every funition is mark with ?? signs so I don?t know what botton to use. I trird to use UV-3r software but it wont connect with my 5R. Where can I get software that will work correctly for my UV-5R. Thanks jeff Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: Sunday, June 9, 2019 3:00:03 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 126, Issue 7 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: UV-5R and volume. (JD Morrow) 2. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 3. Re: UV-5R and volume. (Nigel A. Gunn G8IFF/W8IFF) 4. Re: UV-5R and volume. (John Kemker) 5. Adding 2m and 70cm repeaters (David) 6. Re: Adding 2m and 70cm repeaters (Jim Unroe) 7. Re: Adding 2m and 70cm repeaters (David) 8. Re: Adding 2m and 70cm repeaters (Amnon Zohar) 9. BF888 Settings tab items not saved (Barry Jackson) 10. Yaesu ft-2dr programming cable (Rodney D. Myers) ---------------------------------------------------------------------- Message: 1 Date: Sat, 8 Jun 2019 16:16:55 -0400 From: "JD Morrow" <ngauge75(a)verizon.net> Subject: Re: [chirp_users] UV-5R and volume. To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <62FFB68360F84463A8D8FFCE40A3C5D4@Laptop15> Content-Type: text/plain; format=flowed; charset="iso-8859-1"; reply-type=original All, Have been programming multiple (15+/-) UV-5's, for our group, for several years. Never have had to mess with the volume. Versions of hardware at the beginning was the worst. Cables and drivers, were a pain for a while to, but not the radio controls. 73's JD k2txv -----Original Message----- From: Jim Unroe Sent: Saturday, June 8, 2019 1:22 PM To: Discussion of CHIRP Subject: Re: [chirp_users] UV-5R and volume. On Sat, Jun 8, 2019 at 12:56 PM Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data > is being communicated to/from the radio over the external radio audio > port, the radio volume control needs to be set midrange for the cable to > "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG The digital data is proviced on connections that have nothing to do with the connections for the analog speaker audio or the analog microphone audio. In addition to the audio wires (that aren't included in the programming cable since they are not necessary to have for programming) and the data wires, there is even a connection that provides DC voltage (5V or 3.3V depending on the radio) to power external devices. http://www.miklor.com/COM/UV_Technical.php#spkrmic Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to John at ngauge75(a)verizon.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com ------------------------------ Message: 2 Date: Sat, 8 Jun 2019 17:10:46 -0400 (EDT) From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> Subject: Re: [chirp_users] UV-5R and volume. To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Don Goodrich <don.goodrich(a)cheerful.com> Message-ID: <2139978547.224644.1560028246453(a)email.ionos.com> Content-Type: text/plain; charset="utf-8" Data uses the same connector. It doesn't go through the radio's audio chain. Audio is disabled when in program mode. > On 08 June 2019 at 12:48 Don Goodrich <don.goodrich(a)cheerful.com> wrote: > > Certainly the computer volume control has no influence but since the data is being communicated to/from the radio over the external radio audio port, the radio volume control needs to be set midrange for the cable to "hear" the outbound data. > > Don Goodrich > don.goodrich(a)Cheerful.com > AF7DG > > > > > Sent: Saturday, June 08, 2019 at 7:12 AM > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com>, "Dennis Wage" <dwage(a)dwage.com> > Subject: Re: [chirp_users] UV-5R and volume. > > True. The setting of the volume control has NOTHING to do with programming. > > If you have to wait several minutes between plugging in the radio and downloading with Chirp then your Windows installation is broken. It's not Chirp causing it. > > > > > > On 08 June 2019 at 06:54 Dennis Wage <dwage(a)dwage.com> wrote: > > > > Pertaining to the UV-5R series of phones, I have seen numerous times that the volume needs to be turned up. > > > > Let's once and for all dispel or confirm this. > > > > I for one have found, and it makes total sense to me, that the volume has absolutely nothing to do with data being transferred to a computer with the data cable. > > > > Please confirm or deny. > > > > Thanks, > > > > Dennis M. Wage (W9BOQ) > > > > 245 Corum Hill Road > > Castalian Springs, TN 37031 > > (615) 310-4242 Cell > > (615) 562-5128 Home > > http://hammondb3organ.net/ > > http://overdubs.net > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net > > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > > > > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Don Goodrich at don.goodrich(a)cheerful.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net

1 0