- Users - lists.chirpmyradio.com

Re: [chirp_users] Can't get a Redmine account created
by JOCK SOUTAR 07 Oct '19

07 Oct '19

There is no password for CHIRP. I'm not sure why they ask for one but there is no such animal. Just contact their support team and ask you questions. They are volunteers so dot expect an immediate reply. Allow at least 1 weeks time. Jock Kc6iih On Sunday, October 6, 2019 Michael Downey N2UN <chirp_users(a)intrepid.danplanet.com> wrote: Hi folks, I've been trying to get an account created on the redmine site, so I can enter a new model request. I seem to have an account, but I can't log in. I figured it must be a problem with my password, so I try to reset it and log in, but that fails. Reproducing the error: 1. Go to https://chirp.danplanet.com/login and fill out the "Login" and "Password" fields, click "Login" button. 2. Get a red box that says "Invalid user or password". 3. Click the link for "Lost password", fill out my email address and click "Submit". 4. Open the email that arrives and click the forgot password link. Enter a new password in the form and confirm it. 5. Try the log in again with the newly-updated password. Expected behavior: I am able to log in to create issues, etc. Actual behavior: I instead still once again get the red box that says "Invalid user or password". Is there any known issue with the system or any way to troubleshoot what might be wrong my account? Of note, the "lost password' feature doesn't seem to work unless the system actually knows my email address, other email addresses that aren't registered get an error message. So I know I'm in there to some extent.... 73, Michael N2UN _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

3 2

[chirp_users] O T Request for A Radio Description
by Glenn N0YJV :) 07 Oct '19

07 Oct '19

Hello, I am hoping someone here has a President Lincoln II + radio, and could write me off-list to give me a description of the various buttons and dials. I am Blind, and the manual does not help me. Thanks. Glenn

1 0

[chirp_users] Can't get a Redmine account created
by Michael Downey N2UN 07 Oct '19

07 Oct '19

Hi folks, I've been trying to get an account created on the redmine site, so I can enter a new model request. I seem to have an account, but I can't log in. I figured it must be a problem with my password, so I try to reset it and log in, but that fails. Reproducing the error: 1. Go to https://chirp.danplanet.com/login and fill out the "Login" and "Password" fields, click "Login" button. 2. Get a red box that says "Invalid user or password". 3. Click the link for "Lost password", fill out my email address and click "Submit". 4. Open the email that arrives and click the forgot password link. Enter a new password in the form and confirm it. 5. Try the log in again with the newly-updated password. Expected behavior: I am able to log in to create issues, etc. Actual behavior: I instead still once again get the red box that says "Invalid user or password". Is there any known issue with the system or any way to troubleshoot what might be wrong my account? Of note, the "lost password' feature doesn't seem to work unless the system actually knows my email address, other email addresses that aren't registered get an error message. So I know I'm in there to some extent.... 73, Michael N2UN

2 2

[chirp_users] Trying chirpw with python3
by Steven A. Falco 05 Oct '19

05 Oct '19

I am trying to use the py3 branch of chirpw, because Fedora Linux is in the process of deprecating python 2. Mostly it is going well, but when I try to export to a CSV file, I get this error message: There was an error during export: 'gi.repository.Gtk' object has no attribute 'Tooltips' The error appears to originate in chirp/ui/importdialog.py around line 302: tips = gtk.Tooltips() Unfortunately, I don't know enough python to understand why this error is happening. Does anyone have a suggestion about how to use chirpw with python 3? Steve

7 13

Re: [chirp_users] chirp_users Digest, Vol 127, Issue 10
by William Thompson 27 Sep '19

27 Sep '19

Jim Unroe, Just saw your response below to the UV-9 programming issue. I do not have nor can locate the factory software or programming cable. I was hoping someone had a same radio and figured out the Chirp combination to program. 73, William ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: Wednesday, July 24, 2019 2:00 PM To: chirp_users(a)intrepid.danplanet.com <chirp_users(a)intrepid.danplanet.com> Subject: chirp_users Digest, Vol 127, Issue 10 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Programming Baofeng UV-9 (William Thompson) 2. Re: Programming Baofeng UV-9 (Doug Schafer) 3. Re: Baofeng UV-82HP Programming Issues (MacOS Mojave 10.14.5) (Brennan Stanford) 4. Re: Programming Baofeng UV-9 (Jim Unroe) ---------------------------------------------------------------------- Message: 1 Date: Tue, 23 Jul 2019 21:44:29 +0000 From: William Thompson <wthom1(a)outlook.com> Subject: [chirp_users] Programming Baofeng UV-9 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <DM6PR12MB377013C2F915C97E46C5589784C70(a)DM6PR12MB3770.namprd12.prod.outlook.com> Content-Type: text/plain; charset="iso-8859-1" I'm helping a group program their new radios. They have Baofeng UV-9, not 9R, but UV-9. There are no manufacture labels except in the battery compartment. It appears to be a UV-5R variant as it incorporates the Kenwood standard 2-pin plug and a 5R spkr-mic works with the radio. I'm using the same cable that I use with my 5R but the radio fails to respond to Chirp no matter what radio model I use in the Baofeng and BTECH listings. Is there a preferred for this radio. By the way, it doesn't show a firmware version on power-up. 73, William

1 1

[chirp_users] New Daily Build
by Build System 26 Sep '19

26 Sep '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190925 A list of the changes included in this build (since the last daily) follows: Changes for Build #593 [Rick DeWitt <aa0rd(a)yahoo.com>] [icf.py] Add download checksum calculation per issue #7075 Added logic in process_data_frame to calculate and compare csum. Issue #7075 Changes for Build #594

4 6

Re: [chirp_users] Baofeng A58S tri-band
by Michael E. Jaggers 25 Sep '19

25 Sep '19

Nick: I have been following this thread, because, like you, I have one of these Baofeng A58 S radios. Unfortunately, I have been unable to find ANY software that will let me read or write to the radio. What success have you had? If you found a version of the OEM software that will let you work with this HT, where did you find it? Thanks. Mike, WB4TTZ -----Original Message----- >From: Nick G4IRX <g4irx9(a)nowindows.net> >Sent: Sep 6, 2019 5:50 PM >To: chirp_users(a)intrepid.danplanet.com >Subject: Re: [chirp_users] Baofeng A58S tri-band > > >Thanks for all your help Jim, I think next step is to try writing to >the radio then and see if I can break it. If I do, it's not a great >financial loss. > >I also discovered that the you guys managed to include the KG-UV9Dplus >in recent builds which is great news and it means that I don't need to >have the Wouxun software installed any longer. This project never ceases >to amaze me! > >73, Nick.

2 1

[chirp_users] Zastone A-19 HT
by wa6dij 20 Sep '19

20 Sep '19

Is there a method to program a Zastone A-19 HT. All I can find from the vendor is in Chinese and I am unable to use it. Jim Tripp / WA6DIJ

3 3

[chirp_users] Mac OS 10.14 and Generic USB-Serial cable [Errno 16] Resource busy issue??
by Brendon Cannon 20 Sep '19

20 Sep '19

Hi all, I am a little out of my depth with my Chirp connection to my Yaesu FT7800 on my MacBook (OS 10.14)....('had no issues earlier with a Win 7 machine and this cable). Chirp is returning "could not open port /dev/cu.monic-SerialPortService: [Errno 16] Resource busy: '/dev/cu.monic-SerialPortService'" Mac OS Sys info returns: *USB-Serial Controller:* Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0x14200000 / 7 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): 0 Hopefully a Mac expert can point me in the right direction to debug?? Thanks in anticipation and thanks for considering my issue! 73, Brendon (VK4MHZ)

1 0

[chirp_users] Fwd: Re: Leixen VV-898S
by Tom Henderson 19 Sep '19

19 Sep '19

Oops, meant to reply to the list... -------- Forwarded Message -------- Subject: Re: [chirp_users] Leixen VV-898S Date: Wed, 18 Sep 2019 20:54:58 -0500 From: Tom Henderson <Tom(a)Henderson4.us> To: Nigel A. Gunn G8IFF/W8IFF <nigel(a)ngunn.net> Try downloading it as a Jetstream 270mh. I discovered that the A and B bakc were preserved when I downloaded with that profile rather than the Leixen. Tom Henderson On 9/18/19 8:45 PM, Nigel A. Gunn G8IFF/W8IFF wrote: > > If you're going to import from another radio, import the .img file and > not a .csv file. > >> On 18 September 2019 at 19:59 Dennis Wage <dwage(a)dwage.com> wrote: >> >> Don't import files from a different radio. They might import but >> might be the wrong format. I am thinking about the sorting thing >> could be as simple as 01 instead 1 or 001. With radio software like >> Chirp and especially Chirp, because it works with so many different >> radios, the formats of everything needs to be EXACT!! >> >> Reset your radio to factory defaults. I always then program one >> frequency manually so that when I download from the radio to Chirp I >> can see the format the data is in. >> >> Download the now defaulted radio to a file. Edit this file to upload >> back to the radio. >> >> Dennis M. Wage (W9BOQ) >> >> 245 Corum Hill Road >> Castalian Springs, TN 37031 >> (615) 310-4242 Cell >> (615) 562-5128 Home >> http://hammondb3organ.net <http://hammondb3organ.net/> >> http://overdubs.net >> >> >> On Wed, Sep 18, 2019 at 6:40 PM Dave C < cavanadd(a)gmail.com >> <mailto:cavanadd@gmail.com>> wrote: >> >> I just received the above radio and am having a bit of trouble >> with the >> way CHIRP (or the radio) is handling the channels after programming. >> The radio seems to work fine, the programming cable connected >> right away >> without any driver drama, and the factory software even loaded up >> and >> will upload and download to and from the radio, but it's otherwise >> mostly useless**. Chirp seems to work fine as well as far as >> reading >> and writing to the radio, and I was able to import UV-5R files >> without >> any problem. The problem I'm having is the order of the channels is >> scrambled when uploading or downloading. I THINK it has >> something to do >> with the separate A and B memory banks. I made sure I selected >> the "A" >> bank on the Settings screen, but it still seems to scramble the >> channels. Earlier today I manually entered twelve local >> repeaters and >> numbered them channels 1 through 12, all in Bank A, but when I >> downloaded the radio to CHIRP, the #1 channel was now #4. I also >> deliberately didn't give any of the manually entered channels >> names, but >> there were channels with names scattered in with the other unnamed >> channels, apparently from Bank B. >> >> If anyone has any ideas I'd like to hear them. >> >> ** The factory software has two separate screens for Bank A and >> B, and >> seems to work fine moving files to and from the radio. The >> problem is I >> can't see any way to enter repeater offset frequencies or -/+ >> values; >> apparently it's necessary to calculate and enter offsets manually. >> >> thanks >> Dave >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Dennis Wage at dwage(a)dwage.com >> <mailto:dwage@dwage.com> >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com >> <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com > > > Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 > 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www > http://www.ngunn.net > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Tom KM4UQB attom(a)henderson4.us > To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com

1 0