- Users - lists.chirpmyradio.com

[chirp_users] Log in issues
by Jeff Farrar 26 Oct '19

26 Oct '19

I am trying to log in to chirp.danplanet.com to report a bug. I created an account but I always get the 'invalid user or password' when logging in. I've changed passwords 3 x . I know the system registered me as I get the password change emails plus when I tried to re-register the message was the username and email were already in use I use Chrome but got the same result w/ IE Thank you, Jeff Farrar c: 480.236.3489

1 0

[chirp_users] Chirp not allowing 2.5kHz step on Wouxun KG-UV6X
by jimmcc＠mccorison.com 25 Oct '19

25 Oct '19

Somewhere in the past month or two it appears that a bug was introduced into Chirp for the Wouxun KG-UV6X. It is no longer accepting 2.50kHz step frequency programming. When importing frequencies into a downloaded image the 2.50kHz are dropped. Attempting to manual enter a frequency gives the error: Error setting memory: Tuning step 2.5 not support Frequency requires 2.50kHz step I have confirmed that the VFO A/B Frequency Steps are set to 2.5. This occurs when importing or manually entering into downloaded images from the newest shipped versions of the KG-UV6X as well as older previously programmed radios. This behavior is still present in the most recent daily. Has anybody else run into this, or can anybody else confirm the behavior. Cheers, Jim K2SON

1 0

[chirp_users] Arcshell AR-5
by Carlton Noles 25 Oct '19

25 Oct '19

I am attempting to program these radios and get "radio refuses to enter programming mode" when trying to download hte config from the radio. newbie if you couldn't tell Carlton Noles -------------------

3 3

[chirp_users] Latest CHIRP shows wrong radio on old .img file
by Tom ND5Y 23 Oct '19

23 Oct '19

Today I was looking at an old factory default CHIRP .img image file from a UV-82 (dual band, two power levels, B82S25 firmware) that I downloaded from the radio on 10 Dec 2013 when it was new and probably with the latest version of CHIRP at that time. When I opened the file with the latest version of CHIRP (CHIRP daily-20191022) it shows the radio model as a Radioddity UV-82X3. That should be impossible. I haven't looked at the file for several years so I don't know when CHIRP started doing this. I can send the file to one of the devs if they want it. Tom ND5Y

3 2

[chirp_users] Upgraded Mac
by Old Bindlestiff 23 Oct '19

23 Oct '19

Is there a 64 bit version of this software? After MS bricked my computer during an update, MS suggested that I buy a new computer. So...I did. Any joy? Gene AC4ZY

3 2

Re: [chirp_users] Program cable with CHIRP software
by JOCK SOUTAR 22 Oct '19

22 Oct '19

I call for the moderator step in on this language. On Tuesday, October 22, 2019 Charlie Koonce <chirp_users(a)intrepid.danplanet.com> wrote: Gads On Oct 22, 2019, at 10:06 AM, Reza Rahgozar <reza.bahrami1980(a)gmail.com> wrote: Yes I can fuck it mother as free tomorrow night On Mon, 21 Oct 2019, 05:19 Augliera Jim via chirp_users, <chirp_users(a)intrepid.danplanet.com> wrote: I purchased the BTECH- Baofeng Tech.com programming cable, #PC03 FTDI Cable Dual Pin, UPC # 7 0174807090409; along with the new BF-F8HP and UV-5R radios. When I attach the programming cable to the radio and connect the USB end of the programming cable to USB port on the computer; I receive a warning message, telling me this radio's driver is experimental, and asking if I want to proceed? I do have the CHIRP software installed on this computer. I have attached an image of the warning message. I am not sure if I should proceed or not. Can you offer some guidance with this? Thank you, _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Orbit at reza.bahrami1980(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Charlie at charliko(a)live.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

7 7

[chirp_users] Program cable with CHIRP software
by Augliera Jim 22 Oct '19

22 Oct '19

I purchased the BTECH- Baofeng Tech.com programming cable, #PC03 FTDI Cable Dual Pin, UPC # 7 0174807090409; along with the new BF-F8HP and UV-5R radios. When I attach the programming cable to the radio and connect the USB end of the programming cable to USB port on the computer; I receive a warning message, telling me this radio's driver is experimental, and asking if I want to proceed? I do have the CHIRP software installed on this computer. I have attached an image of the warning message. I am not sure if I should proceed or not. Can you offer some guidance with this? Thank you,

8 8

[chirp_users] XIAMEN X-008
by fathorrachman rachman 22 Oct '19

22 Oct '19

i can't use to reprogramed xiamen x-008.. and i can't write the radio which one that i can use it... thanks God Bless all of you team..

2 1

[chirp_users] New Daily Build
by Build System 22 Oct '19

22 Oct '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20191022 A list of the changes included in this build (since the last daily) follows: Changes for Build #596 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-A58S] Add Support for Baofeng UV-82III This patch adds support for "waterproof" Baofeng tri-band models. BF-A58S UV-82III (alias) related to #7163 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-A58S] Add Support for Baofeng UV-82III This patch only cleans up driver style issues prior to adding support for new models. There are no changes in functionality. Add baofeng_wp970i.py driver to cpep8.manifest Clean up driver style issues (correct indentation, remove whitespace, add/remove blank lines, etc) related to #7163

1 0

[chirp_users] CHIRP on py3
by Nicolas Pike 21 Oct '19

21 Oct '19

I see there is a py3 branch. What is the state of CHIRP on Python 3? I am intending to further improve the FT70 driver, and a pal as an FT3 which he has done some outline memory mapping work for. Should we be developing against the py3 branch? Thanks. Nicolas

5 11