- Users - lists.chirpmyradio.com

[chirp_users] Icom 2730A
by Dave Frick-Wright 18 Jan '20

18 Jan '20

I have been having trouble with getting my 2730 to accept an upload to the radio from CHIRP. I can download just fine, but when uploading back to the radio it hangs, and does a full reset of the radio. I am using a MacBook Air running 10.14.6 . I have tried several different daily builds of CHIRP with no luck. Any ideas? By the way, everything works when I use PC running Windows 10. -- Dave Frick-Wright Milwaukie, OR KJ7DTT

1 0

Re: [chirp_users] programming baofeng uv-5r with chirp
by Amnon Zohar 16 Jan '20

16 Jan '20

On older uv-5r the default range for vhf was 136-174. Now some show 130-179! Does older models support shorter range or is it just different default settings and all support 130-179(or more?)

2 2

Re: [chirp_users] Chirp and DM-5R Programming
by IT1 Stuart Blake Tener, USNR 14 Jan '20

14 Jan '20

John, et alia: Well, I do understand Chirp not supporting DMR radios. I mean, obviously it could but if it does not, so be it. However, your comment about DM-5R radios using a different Baofeng cable is quite interesting! How can I tell (other than just seeing it does not read the radio) if a potential Beofeng cable is the proper one for a DM-5R (say I see it at a hamfest)? I'm on my 4th or 5th Beofeng cable I've purchased and still have none to program this radio! Can I make one? Where can I get one? Thanks in advance! 73, Stuart, N3GWG

4 3

[chirp_users] Chirp and DM-5R Programming
by IT1 Stuart Blake Tener, USNR 12 Jan '20

12 Jan '20

List members, I am curious if Chirp supports the programming of the Beofeng DM-5R radio? Moreover, I am also having trouble doing the programming with the DM-5R software and cable as well. Thus, if Chirp does support the DM-5R perhaps there are folks on the list that can help me getting the official software working as well. Thanks! 73, Stuart, N3GWG

3 2

[chirp_users] Chirp screen display and nominal behavior
by Nita S. 12 Jan '20

12 Jan '20

I am new to Chirp. My radio, a Jetstream JT-270MH, has the capability of specifying both a tone encode (for keying a repeater) and a tone decode (for validating that transmissions received) are from the correct repeater. I had manually entered these into the radio, and it was working correctly. Then I introduced Chirp into the picture. Chirp has columns for both Tone and ToneSql. I have been unable to get the correct tone to show in both columns. Generally, I see a value in the Tone column combined with 'Tone' in the Tone Mode column. Alternatively, I see a value in the ToneSql column and 'TSQL' in the Tone Mode column. Is this the correct display, and if so which one tells me that Chirp is programming the tone for transmissions in both directions ? Note that I can open the memory line in a Properties window, set both Tone and ToneSql to the same value, but they do not stick when clicking OK. Also note that I have opened bug # 7475 concerning the precise radio profile used to clone this data, and issues encountered, so there could be a connection, but seems unlikely to me.

4 3

Re: [chirp_users] chirp_users Digest, Vol 133, Issue 8
by Dave B 12 Jan '20

12 Jan '20

"At the moment"... I have some sympathy with Prolific, and FTDI who also have had their chip's faked. I personally have seen one chip marked up as FTDI, but appeared to Windows as a Prolific chip! The seller did the right thing, at their expense. I Feel sorry for them too. It is I suspect, only a matter of time, before one Linux distro or other also detects and blocks the use of such "fake" chips. After that, all the others will probably do so too. I also have sympathy for people who bought a "product" unknowingly with a fake chip in it. "The Product" manufacturer should make things good, but that rarely if ever happens. Too many people loose out to the counterfeiters in these cases. 73. Dave G8KBV. On 11/01/2020 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > Score another point for Linux - it does not care if the chip in your cable > is a fake Prolific, it just works anyway! There is also a driver available > for Mac that can handle the fake Prolific chips. It seems only Windows has > this problem. -- Created on and sent from a Unix like PC running and using free and open source software:

2 2

[chirp_users] BAOFENG UV-5R8W
by Troy Hunter 11 Jan '20

11 Jan '20

First I'd like to say, what an awesome, helpful group, Does anyone have any experience with the BAOFENG UV-5R8W? I Just got one from ABBREE through Amazon. Has anyone had success with any type of software for programing? This is supposedly a three power model. I have tried a few models on CHIRP, the included BAOFENG software and attempted a download from the ABBREE website, all with what I would call negative results. It was a package deal with an included Baofeng cable (Prolific USP) that that Windows 10 said was working. Any help would be appreciated, especially knowing if there is a model I can select on CHIRP that has worked for others. Best Regards, Troy Hunter (Newly licensed)

12 18

[chirp_users] Icom ID-5100A
by Chuck Hast 07 Jan '20

07 Jan '20

Has anything happened with the ID-5100A? Sure would be nice to be able to use chirp with it. My offer is still open to lend the radio to someone if they need a radio to work with, or I can guinea pig, for you but sure would be nice to be able to at least pull the memory chip and modify it under Chirp. I use it for all of my Chinese radios, and on my old IC-92AD, there are some issues with the last radio now, it used to work great but what I need right now works just fine. -- Chirp + Editcp + MD380Tools on Linux Celestial!!! Chuck -- KP4DJT

2 2

[chirp_users] FTM-400XDR
by Thomas Kravitz 07 Jan '20

07 Jan '20

Will you be including software for the Yaesu FTM-400xdr? I am not sure if the FTM-350 software would work.. Tom Kravitz KI6BL Weather Station KCAPLAYA8

2 1

[chirp_users] New Daily Build
by Build System 07 Jan '20

07 Jan '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20200107 A list of the changes included in this build (since the last daily) follows: Changes for Build #608 [Bernhard Hailer <ham73tux(a)gmail.com>] [vx8] #1615 NFM support added There is a 5+ years old issue which I could reproduce: the Yaesu VX-8 didn't support Chirp NFM (as in "half channel bandwidth", not as in Yaesu's meaning: Yaesu calls the normal 25 kHz bandwidth "NFM", as opposed to broadcast "WFM"; to achieve what's called "NFM" in Chirp, one needs to enable "half deviation" in the VX-8). This patch introduces Chirp NFM support to the VX-8 driver. Tested on a VX-8DR. 73 Bernhard AE6YN #1615

1 0