- Users - lists.chirpmyradio.com

Re: [chirp_users] Baofeng T-57 (Jim Unroe)
by Michael E. Jaggers 25 May '20

25 May '20

More: I went back to my saved images, and I had notated that I was using the UV-82WP drivers to read the UV-XP. That no longer works on the latest version of CHIRP. The version that I have installed on my programming laptop is 20200227. That still works. Something has changed in the driver. Mike, WB4TTZ -----Original Message----- >From: "Michael E. Jaggers" <mej(a)mindspring.com> >Sent: May 24, 2020 7:46 AM >To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> >Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > >The case looks like my UV-XR, but that does not mean anything. > >Mike, WB4TTZ > >-----Original Message----- >>From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> >>Sent: May 23, 2020 7:26 PM >>To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Richard Setford <rich(a)setford.net> >>Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) >> >>A T-57 is a UV-9R? >> >>> On 23 May 2020 at 20:19 Richard Setford <rich(a)setford.net> wrote: >>> >>> >>> Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no >>> avail. The predominant error message I get reads: >>> >>> Error reading data from radio: not the amount of data we want >>> >>> Does that help? >>> >>> Rich >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >>> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >> >>Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 >>Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net >>_______________________________________________ >>chirp_users mailing list >>chirp_users(a)intrepid.danplanet.com >>http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>This message was sent to Michael Jaggers at mej(a)mindspring.com >>To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >_______________________________________________ >chirp_users mailing list >chirp_users(a)intrepid.danplanet.com >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Michael Jaggers at mej(a)mindspring.com >To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

Re: [chirp_users] Baofeng T-57 (Jim Unroe) (Michael E. Jaggers) (Nigel A. Gunn G8IFF/W8IFF)
by Richard Setford 25 May '20

25 May '20

To Nigel and Michael, Just to be clear, I have tried every Baofeng model currently listed in CHIRP and can't get it to work. Rich > Message: 1 > Date: Sun, 24 May 2020 01:19:30 +0100 > From: Richard Setford <rich(a)setford.net> > Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <d3910b03-7e8f-814c-8cfe-d1f226b126b7(a)setford.net> > Content-Type: text/plain; charset=utf-8; format=flowed > > Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no > avail. The predominant error message I get reads: > > Error reading data from radio: not the amount of data we want > > Does that help? > > Rich > > > > > ------------------------------ > > Message: 2 > Date: Sat, 23 May 2020 20:26:26 -0400 (EDT) > From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> > Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Richard > Setford <rich(a)setford.net> > Message-ID: <370817437.223253.1590279986478(a)email.ionos.com> > Content-Type: text/plain; charset=UTF-8 > > A T-57 is a UV-9R? > >> On 23 May 2020 at 20:19 Richard Setford <rich(a)setford.net> wrote: >> >> >> Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no >> avail. The predominant error message I get reads: >> >> Error reading data from radio: not the amount of data we want >> >> Does that help? >> >> Rich >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com > Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 > Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www > http://www.ngunn.net > > > ------------------------------ > > Message: 3 > Date: Sun, 24 May 2020 07:46:37 -0500 (GMT-05:00) > From: "Michael E. Jaggers" <mej(a)mindspring.com> > Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <707217450.586.1590324398402(a)wamui-mouse.atl.sa.earthlink.net> > Content-Type: text/plain; charset=UTF-8 > > The case looks like my UV-XR, but that does not mean anything. > > Mike, WB4TTZ > > -----Original Message----- >> From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> >> Sent: May 23, 2020 7:26 PM >> To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Richard >> Setford <rich(a)setford.net> >> Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) >> >> A T-57 is a UV-9R? >> >>> On 23 May 2020 at 20:19 Richard Setford <rich(a)setford.net> wrote: >>> >>> >>> Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no >>> avail. The predominant error message I get reads: >>> >>> Error reading data from radio: not the amount of data we want >>> >>> Does that help? >>> >>> Rich >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >> Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 >> Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net >> www http://www.ngunn.net >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Michael Jaggers at mej(a)mindspring.com >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com > > End of chirp_users Digest, Vol 137, Issue 20 > ********************************************

1 0

[chirp_users] Installing On A Mac
by Glenn K0LNY 24 May '20

24 May '20

Hi, A Blind user would like to try chirp, and I'll paste below what they said the computer stated: Cqnnot verify this as my Mac says Chirp is unsigned and will not let me run the app. Is there another method of doing this? Thanks. Glenn

2 1

Re: [chirp_users] Baofeng T-57 (Jim Unroe)
by Michael E. Jaggers 24 May '20

24 May '20

The case looks like my UV-XR, but that does not mean anything. Mike, WB4TTZ -----Original Message----- >From: "Nigel A. Gunn G8IFF/W8IFF" <nigel(a)ngunn.net> >Sent: May 23, 2020 7:26 PM >To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>, Richard Setford <rich(a)setford.net> >Subject: Re: [chirp_users] Baofeng T-57 (Jim Unroe) > >A T-57 is a UV-9R? > >> On 23 May 2020 at 20:19 Richard Setford <rich(a)setford.net> wrote: >> >> >> Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no >> avail. The predominant error message I get reads: >> >> Error reading data from radio: not the amount of data we want >> >> Does that help? >> >> Rich >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > >Nigel A. Gunn, ///shoulders.outwards.resolutions tel +1 937 825 5032 >Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net www http://www.ngunn.net >_______________________________________________ >chirp_users mailing list >chirp_users(a)intrepid.danplanet.com >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Michael Jaggers at mej(a)mindspring.com >To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

Re: [chirp_users] Baofeng T-57 (Jim Unroe)
by Richard Setford 24 May '20

24 May '20

Thanks Jim, I've tried all the Baofeng models listed in CHIRP all to no avail. The predominant error message I get reads: Error reading data from radio: not the amount of data we want Does that help? Rich

2 1

[chirp_users] No USB Port Error
by Glenn K0LNY 22 May '20

22 May '20

Hi, I just got a new used radio, a Kenwood TH-F6. So I plugged in the radio using a non-Kenwood cable and I went into "radio" and download from radio and selected my radio model and USB0 and I get the message: error no 2 cannot open tty/usb0 error cannot locate tty/USB0. or something similar. I have used this cable and that Ubuntu with Chirp in the past for my other radios, and other than different brands of radios, I have always been able to do this. I know a guy who has done this to this model using the Baofeng cable using a different software in Windows, not the Kenwood software, but one that they purchased. I don't recall the name, but I think it starts with an R. At any rate, I'd sooner buy a Kenwood cable than that other software and keep using Chirp. Hopefully I didn't get it mixed up with the Radioddity cable. I thought I had the right cable with the Radioddity when I sent it off. I don't know if they put the name of the associated radio on the cables, since I'm Blind. But any who, would this be an error for the wrong cable? Thanks. Glenn

4 7

Re: [chirp_users] chirp_users Digest, Vol 137, Issue 18
by tommy 22 May '20

22 May '20

4 3

[chirp_users] New Daily Build
by Build System 21 May '20

21 May '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20200521 A list of the changes included in this build (since the last daily) follows: Changes for Build #622 [Jaroslav Škarvada <jskarvad(a)redhat.com>] Add support for IC-E90/IC-T90 Fixes #579 [Joe Milbourn <joe(a)milbourn.org.uk>] [AnyTone778] Initial, read and write, support for AnyTone 778UV, partially closes #4901 Probably also supports similar looking things, like the retevis RT95. Supports frequency, offset, name, power, duplex, CTCSS, and DTCS. Doesn't support any settings.

1 0

Re: [chirp_users] chirp_users Digest, Vol 137, Issue 16
by Dave B 20 May '20

20 May '20

I think you need to visit the main Chirp website, and get the PPA details, then add that to your system. https://launchpad.net/~dansmith/+archive/ubuntu/chirp-snapshots Chirp Daily, is not distributed by Ubuntu, but by their own PPA. 73. Dave G0WBX. On 20/05/2020 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > Subject: [chirp_users] Ubuntu FF with PPA: Unable to locate package > chirp-daily? -- Created on and sent from a Unix like PC running and using free and open source software:

3 2

[chirp_users] Pyenv and CHIRP
by D.J.J. Ring, Jr. 20 May '20

20 May '20

Hi CHIRPers, I was going to submit something about pyenv separately but I mentioned it in a post about Ubuntu current. The application pyenv which allows using specific versions with certain programs. I'm trying to get that very program working to allow me to use python 3.7 on a distro SLINT (Slackware) that only has python 2.7. I've gotten pyenv working nicely, but I'm having problems installing slpkg a new unofficial package installer. Haven't mastered yet, but I'm stubborn. I'm sure the devs know other means to keep CHIRP working but I just heard of this, it gives a particular program the python environment it needs and a shortcut with environmental settings can be put in ,profile file. 73 David N1EA

1 0