- Users - lists.chirpmyradio.com

[chirp_users] AnyTone 778UV
by John KI4RO 29 Jun '20

29 Jun '20

Just got the programming cable for this rig and, of course, CHIRP worked perfectly hi hi I noticed that there is no SETTINGS tab available. Is that by design or is it coming in the future? Only reason I noticed is that the Baofeng package has it available. 73 John KI4RO

2 1

[chirp_users] radio software available
by ekdesign1 25 Jun '20

25 Jun '20

Hi. I recently purchase a Baojie BJ-318 that is not supported by Chirp yet, but I did get the software for it. Unfortunately it is cludgy and does not import or cut/paste line by line either, but I wanted to provide a dropbox link for it for anybody who got the radio without software or for Chirp reverse engineering, if possible. Regards. https://www.dropbox.com/s/zowwpsch9kbll05/318%20Programming%20sofware.rar?d…

1 0

[chirp_users] Programing
by Bennie Potgieter 25 Jun '20

25 Jun '20

Gooday I received chanel/frekwensies via a excel spread sheet,how do I program it into any Radio and boafeng,do i enter it one by one or how do I do it,have never done it? Thank you

1 0

[chirp_users] unable to install
by Donald Jacob 24 Jun '20

24 Jun '20

On Windows 10 system, I tried to install daily 20200622-installer.exe and received this message. I tried running as Administrator with same results. Can't write: C:\Program Files (x86)\CHIRP\_hashlib.pyd I do have an earlier version installed, should I remove that one? If so, what will happen to my data for the older version? Thanks Don WB5EKU

2 2

[chirp_users] Help needed with error statement
by kenneth lung 24 Jun '20

24 Jun '20

Hi everyone and I hope that all are healthy!! I have a Baofeng BF-F8HP radio I am having a minor problem with. I hope someone has seen this problem and found the correction for it. Baofeng BF-F8HP Comm channel 3 Use Chirp “Radio” – “Query Data Source” – “Repeater Book” – “RepeaterBook political query – “State (VA)” – “County “Cheaspeake” – “Band (2 meters) Once that is all input, I get this “error”………….No data found If I do the same but use “County (All)” I get 163 repeater listings. I can import those successfully but I would much rather just use repeaters in my area of operation. Any suggestions?? Thanks, Kenny L KD4HQQ Sent from Mail for Windows 10

3 5

Re: [chirp_users] chirp_users Digest, Vol 138, Issue 20
by isumano＠me.com 24 Jun '20

24 Jun '20

Any news in getting support for radioddity gs5b? ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: Wednesday, June 24, 2020 12:00:02 PM To: chirp_users(a)intrepid.danplanet.com <chirp_users(a)intrepid.danplanet.com> Subject: chirp_users Digest, Vol 138, Issue 20 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Baofeng GT-1 can read radio but cannot write (wtforme) 2. Chirp program (George Piek) 3. Re: Chirp program (Jim Unroe) 4. Re: Chirp program (George Piek) 5. Re: Chirp program (Jim Unroe) 6. Re: Radioddity QB25 (Byron Boggs) 7. Re: Chirp program (George Piek) 8. Re: Chirp program (George Piek) 9. Re: Chirp program (Jim Unroe) 10. Re: Radioddity QB25 (Jim Unroe) 11. Re: Radioddity QB25 (Byron Boggs) 12. Re: Radioddity QB25 (Jim Unroe) 13. unable to install (Donald Jacob) ---------------------------------------------------------------------- Message: 1 Date: Tue, 23 Jun 2020 15:10:22 -0400 From: wtforme <wtforme(a)hotmail.com> Subject: Re: [chirp_users] Baofeng GT-1 can read radio but cannot write To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <DM5PR2001MB1722C010C05DC6D42606A8A4BF940(a)DM5PR2001MB1722.namprd20.prod.outlook.com> Content-Type: text/plain; charset="utf-8" Thank you. I finally got the factory software to work. I had to turn off the U ART FIFO BUFFERS. On Tue, Jun 23, 2020, 1:54 PM W Paul Mills <ac0hy(a)wpmills.com> wrote: > Make absolutely sure that the cable is fully plugged into the radio. It is > not unusual for them to not mate up well. > > On 6/20/20 11:37 PM, wtforme wrote: > > I have the latest version of chirp installed. I am showing the Prolific > driver on com 5 and have retrograded it to version 3.2.00. I know it is a > cheap ass cable but what is baffling me is why I can read but not write. > > I am running Windows 10. > > I get the following error: Failed to send block to radio at 0000. > > Thanks for any hep > > _______________________________________________ > chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Paul AC0HY at ac0hy(a)wpmills.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > -- > /************************************************** > * Amateur Radio Station AC0HY * > * W. Paul Mills SN807 * > * Assistant EC Alpha-1 ARES Shawnee/Wabaunsee, KS * > * President Kaw Valley Amateur Radio Club * > **************************************************/ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Bob at wtforme(a)hotmail.com > To unsubscribe, send an email to > chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Radioddity QB25
by Byron Boggs 24 Jun '20

24 Jun '20

I purchased the QB25 with hopes of installing it in my pickup truck. I have two programming cables for it, the one that came with the radio and an FTDI cable that I purchased recently. My problem us error messages. Depending on the port configuration, I get an error message that states it failed to identify the radio, OR the it failed to enter the clone mode. I have tried other variants of this radio like the QTY7900. I have tried Windows 10 and an old laptop with Windows XP. Same error message on either operating system. Searching through requests I see others have experienced the same issue. I have clicked on the post for that issue but it doesn't do anything and I am at a loss as to what I need to do. I have used Chirp to program the little UV5R units without issue. Suggestions will be greatly appreciated Byron Kc8ue Sent from Byron Boggs kc8ue(a)hotmail.com

5 11

[chirp_users] Chirp program
by George Piek 24 Jun '20

24 Jun '20

Good day to you, I am using Chirp for programming my UV 5 R Baofeng Radio. Suddenly when I request to "Download from Radio" I receive the message " Not enough data" Why would that be please. I have used it before and had no problems. Regards George

2 6

[chirp_users] Baofeng GT-1 can read radio but cannot write
by wtforme 23 Jun '20

23 Jun '20

I have the latest version of chirp installed. I am showing the Prolific driver on com 5 and have retrograded it to version 3.2.00. I know it is a cheap ass cable but what is baffling me is why I can read but not write. I am running Windows 10. I get the following error: Failed to send block to radio at 0000. Thanks for any hep

2 2

[chirp_users] New Daily Build
by Build System 22 Jun '20

22 Jun '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20200622 A list of the changes included in this build (since the last daily) follows: Changes for Build #624 [Dan Smith <dsmith(a)danplanet.com>] Fix the fix for #7947 when no memory is loaded (like for make_supported.py) [Jim Unroe <rock.unroe(a)gmail.com>] [IC-T8] Add Icom IC-T8A/E Valid Tuning Steps Fixes #7991 [Jim Unroe <rock.unroe(a)gmail.com>] [RH5R-V2] Add Rugged Radios RH5R-V2 Valid Tuning Steps Also for TYT TH-UVF8F Fixes #7893 [Jim Unroe <rock.unroe(a)gmail.com>] [TERMN-8R] Add Anytone TERMN-8R Valid Tuning Steps Also for Anytone OBLTR-8R Fixes #6561 [Jim Unroe <rock.unroe(a)gmail.com>] [AT-5888UV] Add Anytone AT-5888UV Valid Tuning Steps Fixes #7835 [Joe Milbourn <joe(a)milbourn.org.uk>] [AnyTone 778] Read valid band limits from radio during download, closes #7947 Driver reads band settings at download, and sets RadioFeatures.valid_bands appropriately; also checks band limits during upload and logs a warning if they don't match but doesn't stop or modify the upload. [Joe Milbourn <joe(a)milbourn.org.uk>] [AnyTone778] Index channels from 1, not 0, in the UI. Closes #7943 [Jim Unroe <rock.unroe(a)gmail.com>] [QB25] Add MCU Version for Radioddity QB25 This patch adds an additional MCU version to support the Radioddity QB25 quad-band mobile radio. fixes #7961

1 0