- Users - lists.chirpmyradio.com

[chirp_users] problems uploading or downloading to computer
by Michael D. Krochter 12 Oct '20

12 Oct '20

I have a Yaesu 857 and I have the Prolific USB to Serial comm port cable. I have installed the old driver. It did work with old versions of Chirp. Now it's now working. Any ideas would be appreciated. 73 Mike K.

2 4

[chirp_users] Why Isn't Chirp In The Main Repository Of Linux Distros?
by Glenn K0LNY 08 Oct '20

08 Oct '20

Hi, I've added the DanSmith repository enough times now that I can do it without looking for the exact syntax. But I keep wondering why Chirp is not in all Linux stable repositories. I mean that if I want something like speech-dispatcher, I don't need to add a repository to get it. As popular as Chirp is, can't it just be in all Linux repositories? Thanks for any info, I have been web searching for an explanation as to why this is in general, but I have only gotten a history of repositories without really explaining an answer to my question. Glenn

7 9

Re: [chirp_users] Why Isn't Chirp In The Main Repository Of Linux Distros?
by Dave B 08 Oct '20

08 Oct '20

Hi. Being stuck in the Python2.x world, rather than moving to Python3.x is one reason. Python2.x has been "End Of Life'd" so most (if not all) distro's are not including it by default. (That EoL notice was made several years ago!) Though, there is nothing to stop you from installing Python2.7 for example (you may have some dependencies to work through though) then install Chirp. 73. Dave G8KBV. (Linux Mint 19.3 in use here.) On 08/10/2020 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > Why Isn't Chirp In The Main Repository Of Linux Distros? -- Created on and sent from a Unix like PC running and using free and open source software:

1 0

[chirp_users] New Daily Build
by Build System 08 Oct '20

08 Oct '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20201008 A list of the changes included in this build (since the last daily) follows: Changes for Build #633 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Add support for XXX.XXX Work Mode Offsets The original UV-5R only supported VFO offsets up to 69.95 MHz. Current models support VFO offsets up to 999.999 MHz. This patch expands the Work Mode Settings VFO A/B Offset settings to match the range of the current models. fixes #6719 [Jim Unroe <rock.unroe(a)gmail.com>] [TI-F8+] Add support for TechSide TI-F8+ This patch adds support for the TechSide TI-F8+ (variant of Baofeng BF-F8HP) related to #8187 [Kosta A. <ve7kcy(a)gmail.com>] [FT-60] Correct characterset to match radio segment display chars. Fixes #8189 [Rick DeWitt <aa0rd(a)yahoo.com>] [ic2730] Tone modes now CHIRP-compliant. Issue #8233 Adds full Cross mode tone>tone for rtcs/ctcs/dtcs Changes for Build #634

1 0

[chirp_users] UV-3R Troubleshooting
by Matthew Carroll 06 Oct '20

06 Oct '20

I just purchased some Baofeng UV-3R radios and am unable to connect to them with chirp using OSX, so looking for some help with troubleshooting. The error I get is the classic "Radio did not ACK first command". I have chirp working just fine with other chinese radios including BF-F8HP, BF-T1 and UV-9R. The BF-F8HP / UV-5R cable I have, and the UV-3R cable both appear to use the same Prolific chipset (the BF-T1 and UV-9R cables show up differently)... Under System Information / Hardware / USB: *BFF8-HP / UV-5R cable (two-pin)* USB-Serial Controller: Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/s Manufacturer: Prolific Technology Inc. Location ID: 0x14100000 / 9 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): 0 *UV-3R cable (single pin)* USB-Serial Controller: Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/s Manufacturer: Prolific Technology Inc. Location ID: 0x14100000 / 4 Current Available (mA): 500 Current Required (mA): 100 Extra Operating Current (mA): 0 *BF-T1 cable (USB) & UV-9R (screw on pin connector)* (Both show up identically under USB settings) USB Serial: Product ID: 0x7523 Vendor ID: 0x1a86 Version: 2.64 Speed: Up to 12 Mb/s Location ID: 0x14100000 / 12 Current Available (mA): 500 Current Required (mA): 98 Extra Operating Current (mA): 0 >From what I've read possible issues could include a driver problem or defective cable. But to my mind, given the chipset appears to be the same and I have the BF-F8HP cable working, I would have thought that the UV-3R cable would work as well? Any ideas for how else to troubleshoot this? Is there anything that's worth trying before I give up and order a different cable? (If not, recommendations for a reliable source for a cable for the UV-3R would be welcome.) Thanks, Matthew

1 0

[chirp_users] Assistance adding files to a radio that's programmed from another radio.
by James Pope 27 Sep '20

27 Sep '20

Hello, I'm running into a slight bit of confusion and would like the easiest way to do the following. My cousin has to Baofeng radios, that I have program with MURS frequencies that he can use, since he is not yet a ham. I also have a lot of local public safety frequencies program into it that he scans, and of course have the transmit turned off on those. Here's what we have going on. At work they are using a different model Baofeng radios, supported by chirp. I would like to take one of his radios from work, read their frequencies and add them to his radio in the list below his current frequencies so he can use it at work. I have read about exporting to CSV and importing and it seems a little confusing. Even if I were to do this, I have read nothing about having a choice of what memory slots the important frequencies would go into, or if I have a choice like I normally do when I'm programming. Is there a simple way I can download the memories from their radios and just copy and paste them into his existing file without overwriting or losing what's already in his radio? Is it possible to open up two radio images, in two different tabs at one time using Chirp? I would think that copy and paste should work somehow but I want to make sure I know exactly how to do it rather than mess up the radios that I've set up for him that he really likes. By messing up I mean putting all the frequencies above the ones that are already in there and not at the end. He really needs these extra frequencies added to his current radios that I programmed for him. Yes, I did make an original image of both of his radios, and I do have the fully programmed images saved. The easiest way to do this, is what I'm looking for. If I can forgo exporting and importing, and just copy that would be ideal. Any assistance or help in this matter is greatly appreciated. Thanks, James

3 2

[chirp_users] CHIRP FTM-3200DR Support?
by Jack 26 Sep '20

26 Sep '20

I have looked at the web site (FAQ/Wiki/etc) and have not found a definitive answer as to whether an FTM-3200DR is a supported rig. I did see one thread that was several years old but that did not answer my question. I have seen mention of a FTM-3200D but all the documentation I find on the Yaesu web site only refers to radios appended DR or DE. Apologies if this has been answered before but I could not find it. 73, Jack, K0JP/VE3RUA -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

3 2

[chirp_users] Programming Retevis R21
by bob burks 25 Sep '20

25 Sep '20

Need some help. Our church uses these for inter church communication. I have setup the first 20 or 30 ht's no problem. I made backup of the program image. We are in need of adding more RT21 to the flock. My problem is after programming the new ht's everything works etc the transmit audio is extremely low to not at all. I also noticed the image file loads back differently by dropping out data. I have changed to the latest Chirp level. And have two programming cables. Nothing changes. I use a working ht and when I download the image file it also is not the same as the orginal. I have also used 4 different laptops and a table computer. Most are running ein 10. I have another laptop running vista sw and the results are the same. Any ideas??

3 3

[chirp_users] Yeasu FT-11
by bob＠tyroneflats.com 24 Sep '20

24 Sep '20

Wondering if any of the other radios on the list might work for programming an old FT-11. Thanks!

1 0

[chirp_users] Icom W-32A
by bob＠tyroneflats.com 24 Sep '20

24 Sep '20

Hi All, When I download from my Icom W-32A it only grabs the 2M band. How do I get the (440 and Aviation) channels? Thanks!

1 0