- Users - lists.chirpmyradio.com

[chirp_users] Baofeng UV-XR
by Remi Kemperman 22 Nov '20

22 Nov '20

Hi, is there anybody who can tell me which model Baofeng is compatible with the UV-XR so I can use Chirp? Thanks

2 1

[chirp_users] New Daily Build
by Build System 21 Nov '20

21 Nov '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20201120 A list of the changes included in this build (since the last daily) follows: Changes for Build #636 [Jim Unroe <rock.unroe(a)gmail.com>] [TH-UV88] New Model: TYT TH-UV88 (replacement for previous patch) This patch adds support for the TYT TH-UV88 Initial radio protocol decode, channels and memory layout by James Berry <james(a)coppermoth.com>, Summer 2020 Related to #7817 [Jim Unroe <rock.unroe(a)gmail.com>] [H777] Add Alias for Retevis H777 This patch add an alias for the Retevis H777 #8451 [Joe Milbourn <joe(a)milbourn.org.uk>] [AnyTone 778UV] Add support for Yedro YC-M04VUS, an AnyTone 778UV alias. closes #8005. Thanks to Fernando Sclavo for making it work, I just copied and pasted. [Jim Unroe <rock.unroe(a)gmail.com>] [TH-UVF1] Add TYT TH-UVF1 Valid Tuning Steps This patch adds rf.valid_tuning_steps Fixes #8031 [Joe Milbourn <joe(a)milbourn.org.uk>] [AnyTone 778UV] Fix DTCS support, closes #8327 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5X3] Add Out-of-Range Limit Checking for Band Limits This patch adds limit checking for the BTech UV-5X3 band limits. related to #8393 [Jim Unroe <rock.unroe(a)gmail.com>] [AT-778UV] Fix Mode:02 VHF Band Limit This patch corrects a typo that affects the Mode:02 VHF lower band limit. Related to issue #8391 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Incorrect Tone Values for ANI/PTT-ID This patch addresses the changes to the "dtmfchars" brought about by the HN5RV01 firmware. While making these changes it was also discovered that the ANI code for these radios is limited to only numeric DTMF characters. This patch also makes this correction. Fixes #8321

3 4

[chirp_users] Programming Baofeng GT3 - Mk11
by Ken Vernon 21 Nov '20

21 Nov '20

Hi all, I’m new to this group - so I hope I’m in the correct forum🤡I’m trying to program a GT3 mk2 on chirp without any luck. The program is not recognising the radio under uvb5. It does recognise 2 other radios I have. Any help would be appreciated. Cheers Ken Sent from my iPhone

3 15

[chirp_users] New Daily Build
by Build System 21 Nov '20

21 Nov '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20201121 A list of the changes included in this build (since the last daily) follows: Changes for Build #637 [Jim Unroe <rock.unroe(a)gmail.com>] [KT-8R] New Model: QYT KT-8R This patch adds support for the QYT KT-8R quad-band handheld radio to the btech.py driver module. Related to #6843 [Brad Schuler <brad(a)schuler.ws>] [AnyTone 5888UV] Add simple squelch mode & additional file identifier and add extra channel attributes Related to issues #1491, #2989, #3653, #6633 and #8407 (#1491, #2989, #3653, #6633) Set the radio's squelch mode to CTCSS/DCS Tones instead of Carrier when the receive tone mode is set. Recognize a file image from this radio when no metadata is present. (#8407) Add the following channel attributes - Tuning steps - Duplex: off - Busy channel lockout - Optional signal selection (DTMF, 2-tone, 5-tone) - Reverse - Compander - Talkaround - PTT ID - Squelch with optional signal - Use custom CTCSS for Tx and/or Rx [Dan Smith <dsmith(a)danplanet.com>] Fix style isse in th_uv88 Related to #7817

1 0

Re: [chirp_users] chirp_users Digest, Vol 143, Issue 8
by Nick 17 Nov '20

17 Nov '20

Jim comes through again. Way to go Elmer.K7NQB 73 ---------- Original Message ---------- From: Natalie Wren <nwren94805(a)gmail.com> To: chirp_users(a)intrepid.danplanet.com Subject: Re: [chirp_users] chirp_users Digest, Vol 143, Issue 8 Date: Tue, 17 Nov 2020 19:01:59 -0800 thanks to all for advice re: programming my baofeng uv-5r+. Special thanks to Jim Unroe-i downloaded the older driver you recommended and also found that my two prong connection was not fully installed. That plus some VERY detailed and helpful directions for using CHIRP supplied by Rich AG6QR from a local ham club have me up and running. thanks again!natalie On Wed, Nov 11, 2020 at 12:02 PM <chirp_users-request(a)intrepid.danplanet.com> wrote:Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. patient help needed for newbie trying to program baofeng uv-5r+ (Natalie Wren) 2. Re: patient help needed for newbie trying to program baofeng uv-5r+ (Silverfox) 3. Re: patient help needed for newbie trying to program baofeng uv-5r+ (Jim Unroe) ---------------------------------------------------------------------- Message: 1 Date: Tue, 10 Nov 2020 17:24:32 -0800 From: Natalie Wren <nwren94805(a)gmail.com> Subject: [chirp_users] patient help needed for newbie trying to program baofeng uv-5r+ To: chirp_users(a)intrepid.danplanet.com Message-ID: <CANjMnp9KENfwGsqZsMzZdFKo48tDDjyp+-wgHRFFUCmo6wryvw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" hi i have downloaded chirp and the driver needed for the usb cable to my windows 7 machine and can't get it to work. i keep getting a 'radio did not respond' message. thanks for anyone willing to help! natalie

1 0

Re: [chirp_users] chirp_users Digest, Vol 143, Issue 8
by Natalie Wren 17 Nov '20

17 Nov '20

thanks to all for advice re: programming my baofeng uv-5r+. Special thanks to Jim Unroe-i downloaded the older driver you recommended and also found that my two prong connection was not fully installed. That plus some VERY detailed and helpful directions for using CHIRP supplied by Rich AG6QR from a local ham club have me up and running. thanks again! natalie On Wed, Nov 11, 2020 at 12:02 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. patient help needed for newbie trying to program baofeng > uv-5r+ (Natalie Wren) > 2. Re: patient help needed for newbie trying to program baofeng > uv-5r+ (Silverfox) > 3. Re: patient help needed for newbie trying to program baofeng > uv-5r+ (Jim Unroe) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 10 Nov 2020 17:24:32 -0800 > From: Natalie Wren <nwren94805(a)gmail.com> > Subject: [chirp_users] patient help needed for newbie trying to > program baofeng uv-5r+ > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > < > CANjMnp9KENfwGsqZsMzZdFKo48tDDjyp+-wgHRFFUCmo6wryvw(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > hi > i have downloaded chirp and the driver needed for the usb cable to my > windows 7 machine and can't get it to work. i keep getting a 'radio did not > respond' message. > > thanks for anyone willing to help! > natalie >

1 0

Re: [chirp_users] baofeng uv-5x3 not able to program
by Nick 17 Nov '20

17 Nov '20

BTechGMRS-50X1 GMRS-V1 MURS-V1 UV-2501 UV-2501+220 UV-25X2 UV-25X4 UV-5001 UV-50X2 UV-50X3 UV-5X3 ---------- Original Message ---------- From: "Greg Cholka" <wcsa(a)wi.rr.com> To: <chirp_users(a)intrepid.danplanet.com> Subject: [chirp_users] baofeng uv-5x3 not able to program Date: Tue, 17 Nov 2020 09:01:31 -0600 I have a baofeng UV-5x3 radio. Chirp says to use uv-5r to program. After I select that radio and try to load it, the screen on my computer says “radio identifies as BTECH UV-5X3” Please choose the proper vendor/model and try again. I can only use uv-5r to program according the instructions with chirp. It says that this program will work with my radio. But does not. What can I do? Thanks, Greg ____________________________________________________________ Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_tag… Biden Makes Picks for Big White House Roles http://thirdpartyoffers.netzero.net/TGL3231/5fb4161156b016102164st02duc1 Mississippi Health Official Has a Stark Holiday Warning http://thirdpartyoffers.netzero.net/TGL3231/5fb4161125eba16102164st02duc2 Rubio Uses a Term Sure to Displease Trump http://thirdpartyoffers.netzero.net/TGL3231/5fb416114645c16102164st02duc3

3 4

[chirp_users] baofeng uv-5x3 not able to program
by Greg Cholka 17 Nov '20

17 Nov '20

I have a baofeng UV-5x3 radio. Chirp says to use uv-5r to program. After I select that radio and try to load it, the screen on my computer says "radio identifies as BTECH UV-5X3" Please choose the proper vendor/model and try again. I can only use uv-5r to program according the instructions with chirp. It says that this program will work with my radio. But does not. What can I do? Thanks, Greg

2 2

[chirp_users] Setting CIRP to display name
by Harold Gray 17 Nov '20

17 Nov '20

When I set B to display the channel name it displays 70CM CA which is the name of frequency 446.000 in stead of the name of all the frequencies that I am using on A. How can I fix this?

2 5

Re: [chirp_users] Failed to download from radio: an integer is required (TIDRADIO TD-H6)
by gandy-o＠twc.com 13 Nov '20

13 Nov '20

I had the same problem with Win. 7. I uninstalled and re downloaded an re installed and problem solved. -----------------------------------------From: "K5MRB" To: chirp_users(a)intrepid.danplanet.com Cc: Sent: Friday November 13 2020 11:24:56AM Subject: [chirp_users] Failed to download from radio: an integer is required (TIDRADIO TD-H6) After this last Chirp update (CHIRP daily-20201014), I am no longer able to program my TD-H6. When I try to upload the radio data to Chirp I get the message, "Failed to download from radio: an integer is required". Download to the radio is impossible as it doesn't appear to recognize it. I get this message using Chirp in Ubuntu 20.04 LTS and Windows 10, so it appears to occur cross platform. I did some research on past issues with the TD-H6, and can only find that this radio was added to Chirp about four months ago. Does anyone have any answers? Any help is appreciated. -- Mike K5MRB GMRS WRJE736 _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users /> This message was sent to gandy-o(a)twc.com at gandy-o(a)twc.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0