- Users - lists.chirpmyradio.com

[chirp_users] New Daily Build
by Build System 18 Jun '17

18 Jun '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170618 A list of the changes included in this build (since the last daily) follows: Changes for Build #490 [Jim Unroe <rock.unroe(a)gmail.com>] [New Model] Add Support for Retevis RT23 Radio This patch adds basic support for the Retevis RT23 radio. Note: This patch removes the "sleep" delays that were in the previously submitted patch. #4619 Changes for Build #491

1 0

Re: [chirp_users] chirp_users Digest, Vol 102, Issue 11
by N7TZK 15 Jun '17

15 Jun '17

On 6/15/2017 1:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > Jim, > Yes, I had that in the beginning and I have chaged the user name to a name without "?".? So my username is Torbjorn, my PC name is Torbjorn so that should be OK.?? Renaming a user account may not be enough. I'm not sure about Windows 10, but in earlier versions, Windows kept the same user profile... in other words... "under the hood", the directory name associated with that user will still reflect the original username. So make sure you create a NEW user account if you haven't already. You can test CHIRP with the new user account to see if it fixes the problem. If it does... then you can deal with copying your user data from your original user account (if desired). Dave

1 0

[chirp_users] Error Insatalling Chirp in Windows 10
by Torbjørn Darre 15 Jun '17

15 Jun '17

Hei, I have an error insatalling Chirp in Windows 10. Can you please help me. When I insall the latest version it does not want to open the program. I have a new desk top PC, with 64 bit system, normal screen and Windows 10 operating system. I have enclosed the Debug Log to describe what happend. Is anybody abl to read the debug file? I am a novice PC user and is requesting help what to do next. Is anybody able to help me please? -- hilsen Torbjorn

2 2

[chirp_users] Looking for assistance
by Gene Anderson 14 Jun '17

14 Jun '17

Last summer while in China I purchased a Baofeng UV-5R. I found it difficult to program by the keypad, so I later purchased a programming cable and have installed Chirp in an effort to program the radio. I have followed the "Basic Procedure for Programming" from the Chirp Beginner's Guide Wiki. But I get the following error message when trying to "Download from radio": "Radio refused to send block 0x0140" The block address doesn't come up the same every time. I also had these values from a handful of other attempts: (0x0300, 0x0380, 0x0280, 0x0240). The Cloning process does not complete. I am using CHIRP daily-20170603 within Xubuntu 17.04 UV-5R firmware version is: 297 (according to screen info when pressing "3" and turning radio on) USB cable seems to have this USB/serial converter: Prolific Technology, Inc. PL2303 Serial Port I am new to VHF/UHF operation and HT operation in general. Not completely new to Linux. Have only one cable and one rig. Here in rural Taiwan at the moment, I don't know anyone else who owns a UV-5R, so I can't test the cable or radio against other units. I did read the FAQ and lots of other info, but nothing I saw there seemed to address my issue. Sincerely yours, BX8AAD

8 12

[chirp_users] Samcom UV-400AP Plus (KST UV-F1000)
by VE3TMT 12 Jun '17

12 Jun '17

Hi, Does anyone know the pinouts for the mini plugs on either or these? I have to make my own programming cable. I don't see either model listed in the Chirp compatibility list, does anyone know if either of these are supported by Chirp? Thanks, Max

2 1

[chirp_users] Name Size
by DonieAllen1971＠Yahoo.com 11 Jun '17

11 Jun '17

Is there a way to increase the number of characters allowed in naming a channel? Sent from Mail for Windows 10

2 1

[chirp_users] Unsuscribe
by Gerry-GI0ZGB 11 Jun '17

11 Jun '17

Hello chirp, Yes, please remove me from the mailing list. -- Best regards, Gerry-GI0ZGB

3 2

[chirp_users] NASCAR Scanner
by DonieAllen1971＠Yahoo.com 10 Jun '17

10 Jun '17

Does anyone know if CHIRP can be used to program my Boafeng UV-5RA as a NASCAR race scanner? Sent from Mail for Windows 10

2 1

[chirp_users] How to program a uv82hp with chirp ?
by wayne1w2 10 Jun '17

10 Jun '17

I tried to program my uv82hp using chirp, it locked it up on vfo and I can't get it unlocked. Chirp will not let me go to settings, I click on settings and it's blank ! Where can I send it to get it fixed? Need help ! THANKS Sent from my Samsung Galaxy smartphone.

3 2

[chirp_users] ID-880H Programming issue
by kd7sjt 10 Jun '17

10 Jun '17

Greetings, It is with a very heavy heart that I have to report that I had to go to the proprietary software for my Icom ID-880H Radio so I could program it. This is after many weeks of troubleshooting, trying to get help from the forums, and finally posting here in a last ditch effort to get some help in resolving the programming problems. A bug report has been filed, but no progress has been made as of yet. I have also found that there is very little support that Chirp has for the Icom ID-880H. My other rigs do work very well with Chirp. I have an Icom IC-91AD; a Kenwood TH-F6A; and an Alinco DR-232MKIII and they all programmed with no problem. I do hope that better support comes soon for the ID-880H as going back and forth between multiple software programs is a hassle, but right now, I don't have a choice. 73, de KD7SJT.

2 1

[chirp_users] Bridgecom support?
by David Griffith 10 Jun '17

10 Jun '17

Does anyone here have a radio from Bridgecom? Their BCM-220 has me interested because it's another entry in the woefully underserved 1.25m band. -- David Griffith dave(a)661.org A: Because it fouls the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?

2 1

[chirp_users] Search for specific radio
by Milford Craig 09 Jun '17

09 Jun '17

Good evening gentlemen: Is there a way to search your archive file for information about a specific radio? In my case I would like to fine information on programming the Jetstream JT-2705M VHF/UHF radio. I understand that there are variations of many of these radios but I do not know what they are. In particular I am looking for a source of a FTDI programming cable for the Jetstream. Any assistance on these question would be of great help to me Milford Craig, N3WYG -- 73 Milford Craig N3WYG "A VETERAN--whether active duty, retired, or National Guard or reserve--is someone who, at one point in their life, wrote a blank check made payable to 'The United States of America', for an amount of 'up to and including my life'."

3 2

[chirp_users] Windows Visual C++ Runtime
by Matt 09 Jun '17

09 Jun '17

Hi all. I've installed Chirp on my windows 7 64bit machine but can't get it to rung for very long. It works fine initially but then randomly throws a "Microsoft Visual C++ Runtime Library" error with the message "This application has requested the Runtime to terminate it in an unusual way." I have installed the latest version of Chirp and the Microsoft Visual C++ 2008 SP1 Redistributable Package but the issue still remains. It has happened when importing a CVS file, when trying to write to a FT-8800 and when trying to read from a TM-V71. Any ideas whats wrong? Matt

1 0

Re: [chirp_users] blocked reply to thread
by Rich Messeder 09 Jun '17

09 Jun '17

I tried some work arounds. Oddly enough, originating a post to this list worked fine, but replying did not. I guess that it was a glitch, though it happened several times that day, because replying now works. Thanks for the info. 73 ~R~ NE1EE ARES AEC On 2017-06-03 11:05:-0400, you wrote: >Rich, > >It is not your HOTMAIL address that has been blacklisted. > >The IP address, or the IP address block, or the ISP that you used to send the reply has been black listed. > >RBL stands for Real-Time Blackhole List > > <http://www.webopedia.com/TERM/R/RBL.html>http://www.webopedia.com/TERM/R/RBL.html > >You sent a reply from 40.92.10.77, apparently that IP address or its IP block have been used to spam. > >Three different anti-spam lists have black listed the IP address from which you sent the reply, details can be found here: > > <http://www.anti-abuse.org/multi-rbl-check-results/?host=40.92.10.77>http://www.anti-abuse.org/multi-rbl-check-results/?host=40.92.10.77 > > >Hotmail & yahoo publish the IP address from which an email was sent, GMail does not. > >Hope that helps. > >-baji.

1 0

Re: [chirp_users] Copying between the Kenwood F6A and V71A
by Rich Messeder 09 Jun '17

09 Jun '17

On 2017-06-03 13:00:+0000, you wrote: >I'd like to copy between the F6A to the V71A, but CHIRP does not permit saving Kenwood files. With my Baofeng, I can open multiple CHIRP instances or open different files on different tabs, and copy from one to another. > >All I can think of is to have them both connected to the computer at the same time, and copy|paste? Or maybe use csv files? > >I have submitted a feature request to have CHIRP save Kenwood images. Results of following suggestions. Thanks to all for the time to offer suggestions. "you can export the as .csv then change it around then import it back in to the other radio." Yes, this works. It's a lot of steps, but has some advantages. "Kenwood's V71A software imports F6A files." Yep, it does. Had not tried it, but it works. I was puzzled at first, then saw that the Open dialog has a drop list for reading many different file types. I chose the F6, and it worked fine. "Why not open a new "tab", copy from the th-f6a into new tab, then attach V71, read it. Copy from new "tab" into the V71 & save?" This seemed [retty simple, so I gave it a try. My first problem was that I wanted to use just one USB port, and hot swap the cables to each radio. On my system, the F6A cable uses COM 10 and the V71A setup uses COM 8. It seemed to me that CHIRP has a problem when I tried to read the F6A, unplug the USB cable, plug in the V71A, and read it. I didn't go back to check that this is true, or is my mistake. I next used 2 USB ports on a powered hub. Read: MCP-2A V71A 0:43, everything. Wrote it all back in 0:38. Read: CHIRP V71A 1:52, all memories, no extra info. Maybe CHIRP is selecting a lower COM speed? Over a minute longer to read the V71A. The CHIRP F6A tab has a Settings tab; the V71A doesn't. Tom commented on this in a separate post. Tried to read from V71A after copying from F6A tab and pasting to V71A tab. "Hot" paste function in CHIRP, not in MCP-2A. 1. Pasted channels showed up on the V71A with only the fist letter showing. Puzzled ;-) 2. I then could not read again from the V71A. 3. Closed and restarted CHIRP. Read the V71A. 4. Discovered that the V71A //ACTUALLY CONTAINS lower case letters in its memories//. These were copied from the F6A, which permits LC. The V71A does not. The MCP filters F6A during importing to [V71A] 6 letters, and converts LC > UC. The V71A won't display the LC letters, even though CHIRP managed to write them there. I didn't find a CHIRP option to convert names to UC. I think the LC names in the F6A are easier to read than all UC. YMMV. So I'm gonna say the operation was a success, but the patient died ;-) 73 ~R~ NE1EE ARES AEC

1 0

Re: [chirp_users] Kenwood V71A extra config fields
by Rich Messeder 09 Jun '17

09 Jun '17

On 2017-06-03 09:26:-0700, you wrote: >On Sat, Jun 3, 2017 at 5:53 AM, Rich Messeder <NE1EE(a)hotmail.com> wrote: >> After reading the V71A in CHIRP, I looked for the extra configuration fields that I see when I run CHIRP on the Baofeng, but didn't see them. I guess that if CHIRP didn't read them, it won't change them, either, and I can still use the Kenwood MCP to manage those fields? > >Not every radio has the same level of support in Chirp. Some have >extra fields, some have settings support, many just have basic >frequency, name, and tone support. If you want to copy/paste channels >with Chirp, then go back and use MCP for the extra fields, that is >just fine. > >Tom Thanks. 73 ~R~ NE1EE ARES AEC

1 0

Re: [chirp_users] Looking for assistance
by Rich Messeder 08 Jun '17

08 Jun '17

On 2017-06-08 07:50:+0800, you wrote: >Last summer while in China I purchased a Baofeng UV-5R. I found it >difficult to program by the keypad, so I later purchased a programming >cable and have installed Chirp in an effort to program the radio. I have been using this cable for some time, with no problems. Windows 10 Pro x64. Baofeng UV-5RTP, among others. PC03 FTDI Authentic Genuine USB Programming Cable for BaoFeng, Kenwood, Wouxun, AnyTone https://www.amazon.com/gp/product/B00HUB0ONK/ref=oh_aui_search_detailpage?i… 73 ~R~ NE1EE ARES AEC

1 0

[chirp_users] Puxing PX-888
by Christopher F. Beesley 08 Jun '17

08 Jun '17

Hi guys, Chris G4OUG here. I believe I am a CHIRP member but the CHIRP site won't accept my log-in details. I have emailed someone at CHIRP but havn't had a reply yet. And now to business... Can anybody please explain why the Puxing PX-888 is not supported by CHIRP? On a broader note, I am absolutely fed up of seeing so many people complaining that they need different cables for each of their radios, that the software supplied is next to useless, and in a few cases that CHIRP cannot be used with this or that radio. It is about time that ALL the manufacturers used standard USB interfaces, both hardware (connectors) and software (drivers and protocols). The memory inside the radio should be organised in such a way that a simple spreadsheet such as Excel can be used, the supplied software need only be an example table with a few example records (rows) filled in. Nobody would need any of these stupid serial cables that only work with one radio, and everybody would be able to use tables containing their own programming needs via several versions of Windows, Apple OS's, Linux distros, or whatever, for years to come without any problems. Ok, CHIRP would be redundant. That would be very sad in a lot of ways. But the current state of affairs is intolerable. How about everybody gets together and tells the major manufacturers that we will NOT buy any more of their radios until they implement the programming of them PROPERLY! If I knew how to start such a campaign I'd do it myself, but I am not au fait with Social Media or any of that stuff. Regards, Chris, G4OUG

3 2

[chirp_users] New Daily Build
by Build System 08 Jun '17

08 Jun '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170608 A list of the changes included in this build (since the last daily) follows: Changes for Build #489 [Keith Williamson <hkwilliamson(a)gmail.com>] [vx8] Added Settings support for stock VX-8R radio. Fixes #4881 This patch adds settings support by adding has_settings True in the get_features function, by copying the original _get_aprs_tx_settings function back down to the VX8DRadio class, and by creating a truncated version of that function in the parent VX8Radio class that just gets the settings that are defined for the VX-8R. Also, a _get_settings function for the VX8Radio class was created that calls a subset of functions of the _get_settings function in the VX8DRadio class. The get_features function in the VX8DRadio class has been removed since the one in the VX8Radio class is now the same. [Keith Williamson <hkwilliamson(a)gmail.com>] [vx8] Fix line longer than 79 chars and add missing pad value to seekto format string. Fix #4881

1 0

[chirp_users] New Daily Build
by Build System 07 Jun '17

07 Jun '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170607 A list of the changes included in this build (since the last daily) follows: Changes for Build #487 [Angus Ainslie <angus(a)akkea.ca>] [FT1D] Fix test for backtrack code - issue #4877 [Angus Ainslie <angus(a)akkea.ca>] [FT1D] fix the PEP8 warnings in the backtrack settings - issue #4877 Changes for Build #488 [Keith Williamson <hkwilliamson(a)gmail.com>] [vx8] Mod to radio memory layout to accommodate diffs between models. Fixes #4881 Split the memobj aprs struct into three structs: shorter aprs struct, aprs_msg_macro struct and aprs2 struct. The aprs_msg_macro[] struct and aprs2 struct are parameterized differently in the VX8Radio class and VX8DRadio class _mem_params. Updated all dereferences of memory elements formerly part of the aprs struct that are now part of either the aprs2 struct or the aprs_msg_macro[] struct. There are no behavioral changes to Chirp with this patch. [Keith Williamson <hkwilliamson(a)gmail.com>] [vx8] Simple refactor that moves most VXDRadio class functions to VXRadio parent class. Fixes #4881 This is the first of two groundwork patches for adding Settings support for the VX-8R. This patch produces no change in functionality. [Keith Williamson <hkwilliamson(a)gmail.com>] [vx8] Fix issue with VX-8R download from radio. Fixes #4883 This patch ensures that the functions from the correct radio class are called when downloading from the radio. This is achieved by defining distinct MODELs for the VX-8R, VX-8DR, and VX-8GE and deleting their VARIANTs. This patch is also accompanied (out-of-band) with test image files for each of the radios. [Pavel Milanes (CO7WT) <pavelmc(a)gmail.com>] [PATCH][tk270.py] Increase OEM band edges by 4.0%, fix #4709 Some of this model's variants are in ranges near ham bands but outside them by the OEM stated range, for example from 150 to 174 Mhz, or 148 to 174 Mhz, in the case of the UHF we has the variants in the 450 to 490 Mhz or the 406 to 430 Mhz. I make some characterizations and most of the radios can work safely with a 4% increment of the stated range safely and will allow to work near ham bands. (real range is bigger but we stick to a safe value) Related also to #4789, see this for real edges data measurements. With improvements an corrections suggested on the chirp_devel mailing list [Pavel Milanes (CO7WT) <pavelmc(a)gmail.com>] [tk760.py] Increase OEM band edges by 4.0%, fix #4789 Some of this model's variants are in ranges near ham bands but outside them by the OEM stated range, for example from 150 to 174 Mhz, or 148 to 174 Mhz, in the case of the UHF we has the variants in the 450 to 490 Mhz or the 406 to 430 Mhz. I make some characterizations and most of the radios can work safely with a 4% of the stated range safely and will allow to work near ham bands. (real range is bigger but we stick to a safe value) This patch was based on the discussions about issue #4709 and improvements from the chirp_devel mailing list comments. [Pavel Milanes (CO7WT) <pavelmc(a)gmail.com>] [tk760g.py] Increase OEM band edges by 4.0%, fix #4789 Some of this model's variants are in ranges near ham bands but outside them by the OEM stated range, for example from 150 to 174 Mhz, or 148 to 174 Mhz, in the case of the UHF we has the variants in the 450 to 490 Mhz or the 406 to 430 Mhz. I make some characterizations and most of the radios can work safely with a 4% of the stated range safely and will allow to work near ham bands. (real range is bigger but we stick to a safe value) This patch was based on the discussions about issue #4709 and fixes due to chirp_devel recomendations

1 0

[chirp_users] Multiple radios, multiple cables
by Tom Marinello 06 Jun '17

06 Jun '17

New to the list, but not new to Chirp. Installed CHIRP in 2013 for my Baofeng UV-5R on my W7 PC. Installed the Prolific 3.2.0.0 drivers, programmed the radio with no problems. Lots of good advice on the Yahoo group. Fast forward to 2017. Got a Kenwood TM-281A from a friend for a base station radio. Ordered a programming cable from an eBay vendor. Installed the Kenwood software, plugged in the cable and had no problem reading from and writing to the Kenwood. Not real impressed with Kenwood's programming software. Decided to see if the radio is supported by CHIRP, downloaded the latest daily build and attempted to use CHIRP. Selected "Download from Radio, selected COM4, Kenwood and TM-281, and pressed OK. Nothing happens at all. If I repeat the process, an error is thrown: "An error has occurred. could not open COM4: [Error 5] Access is denied." Did as much RTFM as I knew how to do. Read Beginner's Guide, read FAQ, Noticed the driver had updated to Prolific 3.8.12.0; downgraded to 3.2.0.0. No change. Cable came with some prolific driver installation software. Included is a "Check PL-2303 chip version" utility. Utility reports "This is a PL-2303 XA/HXA chip." I don't know what my next steps are. Any suggestions? /Tom K6IGY

1 0

[chirp_users] Baofeng UV-5RWP
by Patrick Brown 05 Jun '17

05 Jun '17

A friend of mine has some Baofeng UV-5RWP and chirp supports it but he can not get them to program is there a trick to these radios? -- Patrick Brown YCSRT 3213 N7FHB Wilhoit 145.350 Wildflower SYCSRT TEAM Manager http://ycsrt.org T.E.A.M = Together Everyone Accomplishes More

3 3

[chirp_users] Windows 10 Pro x64, Kenwood F6A and V71A
by Rich Messeder 05 Jun '17

05 Jun '17

Just a note to say that this combo works great. Windows 10 Pro x64 Kenwood F6A and V71A, Baofeng UV-5RTP CHIRP, Kenwood MCP (two versions) Tera Grand - Premium USB 2.0 to RS232 Serial DB9 Adapter - Supports Windows 10, 8, 7, Vista, XP, 2000, 98, Linux and Mac - Built with FTDI Chipset https://www.amazon.com/gp/product/B00BUZ0K68/ref=oh_aui_detailpage_o08_s00?… HOSA DB9(F) to DIN8(M), 3 ft. COMPUTER SOUND-CARD CABLES. https://www.amazon.com/gp/product/B000068OEQ/ref=oh_aui_detailpage_o08_s00?… PC03 FTDI Authentic Genuine USB Programming Cable for BaoFeng, Kenwood, Wouxun, AnyTone https://www.amazon.com/gp/product/B00HUB0ONK/ref=oh_aui_search_detailpage?i… I've been using them for over a year. The FTDI cable works well with Baofeng and Kenwood HTs, and the other cables work w the Kenwood V71A. 73 ~R~ NE1EE ARES AEC

1 0

[chirp_users] Kenwood V71A extra config fields
by Rich Messeder 03 Jun '17

03 Jun '17

After reading the V71A in CHIRP, I looked for the extra configuration fields that I see when I run CHIRP on the Baofeng, but didn't see them. I guess that if CHIRP didn't read them, it won't change them, either, and I can still use the Kenwood MCP to manage those fields? 73 ~R~ NE1EE ARES AEC

2 1

[chirp_users] Are CHIRP img files are always backward compatible?
by Rich Messeder 03 Jun '17

03 Jun '17

For each new release of CHIRP, should I read a new file from the radio, open the latest saved file, and copy memories to the new file? The issue prompting this is that I wonder if CHIRP img files are always backward compatible? Sometimes compatible? What is the 'best practice'? 73 ~R~ NE1EE ARES AEC

2 1

[chirp_users] *.chirp files
by Rich Messeder 03 Jun '17

03 Jun '17

I saved *.chirp files from the F6A, but can't read them now. I think that they are deprecated, but didn't find that when I looked in the CHIRP rev history...not sure how to search for that specific item. If so, I suppose that I might as well delete all .chirp files? I am using CHIRP 2017-05-26. 73 ~R~ NE1EE ARES AEC

3 2

[chirp_users] Copying between the Kenwood F6A and V71A
by Rich Messeder 03 Jun '17

03 Jun '17

I'd like to copy between the F6A to the V71A, but CHIRP does not permit saving Kenwood files. With my Baofeng, I can open multiple CHIRP instances or open different files on different tabs, and copy from one to another. All I can think of is to have them both connected to the computer at the same time, and copy|paste? Or maybe use csv files? I have submitted a feature request to have CHIRP save Kenwood images. 73 ~R~ NE1EE ARES AEC

6 8

Re: [chirp_users] Copying between the Kenwood F6A and V71A
by Rich Messeder 03 Jun '17

03 Jun '17

On 2017-06-03 09:37:-0400, you wrote: >On Sat, 3 Jun 2017 13:00:33 +0000 >Rich Messeder <NE1EE(a)hotmail.com> wrote: > >> I'd like to copy between the F6A to the V71A, but CHIRP does not >> permit saving Kenwood files. With my Baofeng, I can open multiple >> CHIRP instances or open different files on different tabs, and copy >> from one to another. >> >> All I can think of is to have them both connected to the computer at >> the same time, and copy|paste? Or maybe use csv files? >> >> I have submitted a feature request to have CHIRP save Kenwood images. > >Why not open a new "tab", copy from the th-f6a into new tab, then >attach V71, read it. Copy from new "tab" into the V71 & save? > >-- >Rodney D. Myers <rdmyers.42(a)gmail.com> - kg6anx Great idea. I will give this a try at next opportunity. My "problem" was having 2 radios "connected" at the same time, because I have only 1 USB cable. But the radios are "hot-swappable", I have discovered, so this may do the trick. I'll save this thread and update w results. 73 ~R~ NE1EE ARES AEC

2 1

[chirp_users] Yaesu FTM-400XD
by Tom Henderson 03 Jun '17

03 Jun '17

Looks like there is an effort to add support for this radio to Chirp, but it appears to be stalled. How does one assist with adding support for new radios to Chirp? I have linux and windows PCs and a radio, happy to assist if I can. -- Tom Henderson

2 1

Re: [chirp_users] blocked reply to thread
by Baji Panchumarti 03 Jun '17

03 Jun '17

Rich, It is not your HOTMAIL address that has been blacklisted. The IP address, or the IP address block, or the ISP that you used to send the reply has been black listed. RBL stands for Real-Time Blackhole List http://www.webopedia.com/TERM/R/RBL.html You sent a reply from *40.92.10.77, *apparently that IP address or its IP block have been used to spam. Three different anti-spam lists have black listed the IP address from which you sent the reply, details can be found here: http://www.anti-abuse.org/multi-rbl-check-results/?host=40.92.10.77 Hotmail & yahoo publish the IP address from which an email was sent, GMail does not. Hope that helps. -baji. ~~ K 8 I I T _ On Sat, Jun 3, 2017 at 10:15 AM, Rich Messeder <NE1EE(a)hotmail.com> wrote: intrepid.danplanet.com rejected your message to the following email > addresses: > > Discussion of CHIRP (chirp_users(a)intrepid.danplanet.com) > Your message wasn't delivered because the destination email system > rejected your message for security or policy reasons. For example, the > email address might only accept messages from certain senders, or it might > not accept certain types of messages, like those larger than a specific > size. > > Contact the recipient (by phone, for example) and work with them and their > email admin to determine what policy or setting blocked your message and > what you should do to make sure that future messages from you won't be > rejected. > > For more information, see Status code 5.7.1. > > > intrepid.danplanet.com gave this error: > <chirp_users(a)intrepid.danplanet.com>: Recipient address rejected: blocked > by RBL: rbl:truncate.gbudb.net:<http://www.gbudb.com/truncate/ > [40.92.10.77]> > > > > > What happened? I replied with the same email address that I used to send > the original message. > > 73 > ~R~ > NE1EE > ARES AEC > > ________ >

1 0

[chirp_users] blocked reply to thread
by Rich Messeder 03 Jun '17

03 Jun '17

intrepid.danplanet.com rejected your message to the following email addresses: Discussion of CHIRP (chirp_users(a)intrepid.danplanet.com) Your message wasn't delivered because the destination email system rejected your message for security or policy reasons. For example, the email address might only accept messages from certain senders, or it might not accept certain types of messages, like those larger than a specific size. Contact the recipient (by phone, for example) and work with them and their email admin to determine what policy or setting blocked your message and what you should do to make sure that future messages from you won't be rejected. For more information, see Status code 5.7.1. intrepid.danplanet.com gave this error: <chirp_users(a)intrepid.danplanet.com>: Recipient address rejected: blocked by RBL: rbl:truncate.gbudb.net:<http://www.gbudb.com/truncate/ [40.92.10.77]> What happened? I replied with the same email address that I used to send the original message. 73 ~R~ NE1EE ARES AEC

1 0

[chirp_users] New Daily Build
by Build System 03 Jun '17

03 Jun '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170603 A list of the changes included in this build (since the last daily) follows: Changes for Build #486 [Angus Ainslie <angus(a)akkea.ca>] [FT1D] Add support for setting backtrack targets - issue #4877 [SASANO Takayoshi <uaa(a)mx5.nisiq.net>] fix for bug #4863 Delete function cannot work when translating msgid "Loc", this is caused by "Loc" (instead of _("Loc")). And, non_editable flag in make_editor() has same problem. Both fixed.

1 0

[chirp_users] New Daily Build
by Build System 02 Jun '17

02 Jun '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170602 A list of the changes included in this build (since the last daily) follows: Changes for Build #485 [Dan Smith <dsmith(a)danplanet.com>] [ui] Re-focus the original path after editing is completed When editing things like a combo in the memory editor, accepting the edit will screw up the tab order by choosing something else to focus after the ephemeral widget used to do the edit is removed. This saves the current path when editing starts and restores it when editing is finished to avoid messing up the workflow. Fixes #4865

1 0

[chirp_users] Icom ID-880H Compatibility with Chirp
by kd7sjt 31 May '17

31 May '17

Good Morning, I have found through an unbelievable amount of testing with my rigs this weekend, just over 8.5 hours roughly, that CHIRP is NOT compatible with the Icom ID-880H in its current state. I cannot successfully program either one of the ID880H's that I own with this software. I can download from it all day. Uploading, however, error's out every time. I'm not sure if it is a bug in the software or what, but I would sure appreciate any and all input and help. I use Linux Mint 18.1 and CHIRP daily-20170526. If you need me to get more details to you, let me know. I'm more than happy to work together with you to get this issue resolved. I have found this problem to be isolated exclusively to the ID-880H's I own. One is in my shack and the other is in the truck. My Icom IC-91AD, Kenwood TH-F6A and Alinco DR-235MKIII ALL programmed flawlessly using this build of Chirp. Again, I would sure appreciate any and all help on this, as both of these ID-880H's are not cheap radios, and I would really like to get them back on the air as soon as humanly possible. 73, Earl KD7SJT

1 0

[chirp_users] Yaesu System Fusion Group Available
by Mark Thompson 30 May '17

30 May '17

The Yaesu System Fusion Group is available at: https://groups.yahoo.com/neo/groups/YaesuSystemFusion/info

1 0

[chirp_users] BaoFeng BF-F9V2+ issues downloading/uploading to MacBook Pro running 10.12
by Jeff Davis 30 May '17

30 May '17

Hi Folks, I’m running a MacBook Pro using OS 10.12.5. I’ve received three different radios along with USB to BaoFang connection cables. When I open Chrip, the Mac OS systems report shows the USB port and the device so the Mac Sees it. But when I run the Radio/Download from Radio command, I get the Any ideas? I’ve tried all three cables and tried it with this radio as well as two UV-5R’s, same results. Thank you in advance. Jeff Davis KF5HQE

5 4

Re: [chirp_users] BaoFeng BF-F9V2+ issues downloading/uploading to MacBook Pro running 10.12
by kc6iih 29 May '17

29 May '17

Dump the Mac book. I use windows 10 and have no problems. Jock KC6IIH Sent from my Samsung Galaxy Tab®|PRO -------- Original message -------- From: David Dixon <yattonbristol(a)btinternet.com> Date:05/29/2017 10:12 PM (GMT-08:00) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] BaoFeng BF-F9V2+ issues downloading/uploading to MacBook Pro running 10.12 On 30 May 2017, at 03:22, Jeff Davis <kf5hqe.jeff(a)gmail.com> wrote: Hi Folks, I’m running a MacBook Pro using OS 10.12.5. I’ve received three different radios along with USB to BaoFang connection cables. When I open Chrip, the Mac OS systems report shows the USB port and the device so the Mac Sees it. But when I run the Radio/Download from Radio command, I get the <Screen Shot 2017-05-29 at 9.18.23 PM.png> Any ideas? I’ve tried all three cables and tried it with this radio as well as two UV-5R’s, same results. Thank you in advance. Jeff Davis KF5HQE _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David at yattonbristol(a)btinternet.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com Hello Jeff I am using a Mac mini with Chirp with a few radio one is the UV-5R first thing I plug in the USB cable ( USB -02) and radio setting it to VFO mode volume almost full then click on chirp program after clicking on Radio Button on top menu then Download from radio up comes a box then I set it to as Per Photo hope this helps if you get an error before you get this far I my self would reinstall the software and check the usb cable is plugged in well David G1DCG

1 0

[chirp_users] Icom ICF files
by Chuck Hast 29 May '17

29 May '17

Does anyone know if Chirp will write icf files? If it will then my ID-5100 issue may be solved.

4 8

[chirp_users] CHIRP will not start on my WIN 10 laptop
by Bo Sörensson 29 May '17

29 May '17

I have a laptop with WIN 10. First I loaded the .exe version of the daily CHIRP. When I started the program a small window was opened saying that error reporting was enabled. I closed the window and nothing more happened. I tried to run under Administrator mode, but with the same result. Then I unloaded to CHIRP software and loaded the .zip version instead. Same result. When I start the program the only thing that happens is the window with the text about eroor reporting. What am I doing wrong? Bo bo.sorensson(a)tele2.se

2 1

[chirp_users] Icom ID-880H Programming
by kd7sjt 28 May '17

28 May '17

Greetings, I have been attempting to program my Icom ID-880H with Chirp for 3 days now. I downloaded the original image file that was in the radio that had all of the repeaters that I programmed into the radio 4 years ago when using Windows. I no longer use windows and I am currently using Linux Mint 18.1 with the Daily Build of Chirp (CHIRP daily-20170526). I copied that directly off the "About" Tab. I Exported to a .CSV all of the data, and opened Libre Office Calc to edit the file with all of the new and updated frequencies for my QTH, which is Sacramento California. I then got all of the frequencies updated and saved; imported them back into Chirp and attempted to upload them back into the radio. Everything looks great until the very end when the radio says "Clone ERR" on the screen. I then cycle power and the radio clears itself and there is no data in the radio whatsoever. I did try to find if there are any FAQ's on this with no luck. My radio isn't even mentioned in the FAQ's, hi hi. I did verify that it is on the "Supported" list. I have had great success programming my other rigs with Chirp, its just this one so far that is giving me heartache. Are there any known issues with Chirp and the Icom ID-880H? By the way, the original image file that I downloaded before starting any of this, will go back into the rig with no problem. I have saved that and keep it safely guarded so I have atleast something until I can get the new stuff to go into the rig. Any help would be so much appreciated. Thank you for all the hard work you do. 73, Earl KD7SJT Sacramento, CA

1 0

[chirp_users] Offset not set on 70cm for an IC-7100
by M. George 28 May '17

28 May '17

Hi, I tried to do some research on this question... nothing found so far. I'm using chirp with an IC-7100 I just bought and the interface with chirp is working fine except for the fact that 440mhz / 70cm memories I paste in are not updating in the radio with the right Offset. They are all default ot a 600 hz offset like a 2 meter standard. I thought it might be the default offset for each band in the IC-7100 so I made sure 440 has a 5mhz offset, but still when I paste a frequency set as imported from RFinder (for example) none of the 440 offsets are set on those repeaters. I do notice that the Offset isn't a column when you download the memories from the IC-7100. This implies that you can't specifically set the Offset using chirp? Or maybe when you paste in memories to the IC-7100, the IC-7100 won't set the offset based on the receive frequency setting when the duplex is set to + or -. The duplex setting is getting set. Hopefully this isn't a RTFM or RTF-Chirp-M question! Max NG7M -- M. George

1 0

[chirp_users] MAcBook AIR and CHIRP Problems
by John Kobeck 28 May '17

28 May '17

Very frustrated, been trying to program my Kenwood TMV71 with CHIRP, using a FTDI cable from BlueMax and my new Mac Air. The computer will not download from radio. I installed multiple versions of the FTDI drivers and nothing. Even switched the cable for a new one just in case. I was able to program this radio with the same cable and software last year when I had an older MacBook (which I no longer own) Any ideas? I have a feeling maybe there is a simple step I am missing. I believe with the Kenwood TMV71 you simply plug the cable in the fort and go > On May 27, 2017, at 3:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. More Wouxum KG-UV8D (plus) Programming (William Liporace) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 26 May 2017 21:53:49 -0400 > From: William Liporace <wc2l(a)wc2l.com> > Subject: [chirp_users] More Wouxum KG-UV8D (plus) Programming > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: <7637d542-9b03-e3ee-566f-04fd3edfda7a(a)wc2l.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > OK, I was even more stumped!! > Building and etc... I tried a couple of Chirp versions... > The UV8D & UV8D plus are DIFFERENT radios. > Took a bit of searching, but there is programming software on the Wouxom > site! > http://wouxun.com/download.aspx?flid=1093 > > Hope this helps someone else!! Would have saved a lot of work!! > Let me know when Chirp Supports the radio... Yea, I will watch.... > > Will WC2L > > -- > William Liporace WC2L > http://www.wc2l.com or http://dxc.wc2l.com > AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz > wc2l(a)wc2l.com > > > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > End of chirp_users Digest, Vol 101, Issue 26 > ********************************************

2 1

[chirp_users] Yaesu/Vertex Standard VX-150. Is it supported?
by Matthew Pitts 27 May '17

27 May '17

I have had one of these for a few years, but just found my charger for it and was wondering if the radio was supported by Chirp. I'm sure I'll need to program it at some point. Matthew Pitts N8OHU

1 0

[chirp_users] More Wouxum KG-UV8D (plus) Programming
by William Liporace 26 May '17

26 May '17

OK, I was even more stumped!! Building and etc... I tried a couple of Chirp versions... The UV8D & UV8D plus are DIFFERENT radios. Took a bit of searching, but there is programming software on the Wouxom site! http://wouxun.com/download.aspx?flid=1093 Hope this helps someone else!! Would have saved a lot of work!! Let me know when Chirp Supports the radio... Yea, I will watch.... Will WC2L -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz wc2l(a)wc2l.com

1 0

[chirp_users] New Daily Build
by Build System 26 May '17

26 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170526 A list of the changes included in this build (since the last daily) follows: Changes for Build #484 [Wade Simmons <wade(a)wades.im>] [FTM-3200D] Add support for Yaesu FTM-3200D This patch adds basic CHIRP support for programming the FTM-3200D. This radio shares most of its memory layout with the FT1D, so it has been created as a subclass of that radio. #4279

1 0

[chirp_users] Wouxum KG-UV8D (plus)
by William Liporace 25 May '17

25 May '17

I picked up a KG-UV8D(plus) at Dayton. Since I had a Baofeng UV-5R at home with the cable, all I got was the radio. I'm able to read the Baofeng, but not the Wouxum. I get the message saying "This radio driver is currently under development. There are no known issues with it, but you should proceed with caution.". Then I get a message saying "An error occurred, Radio did not respond". I think I have the latest build. TNX Will WC2L -- William Liporace WC2L http://www.wc2l.com or http://dxc.wc2l.com AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz wc2l(a)wc2l.com

2 2

[chirp_users] MacOS daily-20170501 repeatable crash
by Steve Sergeant 25 May '17

25 May '17

I just installed chirp-daily-20170501.app to try. I am attempting to copy setups from one Leixen VV-898E radio into several others. However, a fraction of a second after the screen fills with the data from the radio, Chirp unexpectedly quits, and I'm given the opportunity to send a report to Apple. My system is: Macbook Air 11" (MacBookAir6,1) MacOS X 10.11.6 (15G1421) 4GB RAM The last line in .chirp/debug.log reads: /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() gtk.main() I'm using the osx-pl2303-installer.pkg for my serial driver. This is currently the only radio for which I have a programming cable. Ideas?

6 8

[chirp_users] Windows 10
by Chas. Thompson 24 May '17

24 May '17

It is easy on Windows 10, the trick is to always use the same usb port that has the com# set and the right version of the driver. I have seen several people pick a random port to plug into and think that windows is changing the driver. The facat is they are changing what port they plug into. If someone is having too much trouble I can help over Teamviewer to remote help. Just email me if you are in that much need. Chas.

2 1

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20
by Bob Boehme 23 May '17

23 May '17

One way I found that has been great is to use a raspberry pi.. They now have a 7 inch display that bolts into a case with the pi and a lithium battery which means you can make it completely portable .. I’ve had not problems programming all of my radios with the pi.. From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Stuart Rauh Sent: Tuesday, May 23, 2017 6:22 AM To: roland kelts; Discussion of CHIRP Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20 I have had absolutely no trouble with Windows 10 and Chirp. Works great! Stuart Rauh Stuart(a)Rauhnet.com On Mon, May 22, 2017 at 9:20 PM, roland kelts via chirp_users <chirp_users(a)intrepid.danplanet.com> wrote: people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!! -------------------------------------------- On Sun, 5/21/17, <chirp_users-request(a)intrepid.danplanet.com> wrote: Subject: chirp_users Digest, Vol 101, Issue 20 To: chirp_users(a)intrepid.danplanet.com Date: Sunday, May 21, 2017, 12:00 PM Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Cannot read Baofeng BF-888S (Jim Unroe) 2. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 3. Re: Cannot read Baofeng BF-888S (Rich Baker) 4. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Jardy Dawson) 5. Re: Cannot read Baofeng BF-888S (Jardy Dawson) 6. Re: Cannot read Baofeng BF-888S (Jim McCorison) 7. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 8. Re: Cannot read Baofeng BF-888S (Rich Baker) 9. Re: Cannot read Baofeng BF-888S (Jim McCorison) 10. FT2D (NNN Wx) 11. Re: chirp_users Digest, Vol 101, Issue 19 (Bob Decker) 12. Re: chirp_users Digest, Vol 101, Issue 19 (Carrie Jackson) 13. Re: Cannot read Baofeng BF-888S (Joe Puma) 14. Re: Cannot read Baofeng BF-888S (Joe Puma) ---------------------------------------------------------------------- Message: 1 Date: Sat, 20 May 2017 15:36:37 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U4_wsaCLet=nu=0a90pNzdt=DQc+i7v0b_A_xXK9CTowA(a)mail.gmail.com <mailto:DQc%2Bi7v0b_A_xXK9CTowA@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back. I then turned off the auto driver updates for this > device. Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect. I checked the driver and it was still the 3.2.0.0 driver in my > listing. It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates. I will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site: http://blog.nwaprs.info/ There is no need to disable updates. If Windows does update your Prolific driver, the previous driver is still installed. All you have to do is go into Device Manager and re-select the driver version that you want to use. I keep several Prolific driver versions installed and switch between then at will for testing purposes. Jim KC9HI -------------- next part -------------- A non-text attachment was scrubbed... Name: ProlificDrivers2.jpg Type: image/jpeg Size: 161541 bytes Desc: not available Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/40… ------------------------------ Message: 2 Date: Sat, 20 May 2017 17:58:49 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/ > Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/00… ------------------------------ Message: 3 Date: Sat, 20 May 2017 17:59:05 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> > wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I > too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I > purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and > never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for > this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work > again. > > Don't ask me what is going on but then set it back for auto updates. I > will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/3e… ------------------------------ Message: 4 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <E64697DE-5BA1-4595-AC56-99B0663E9B06(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH EMAIL. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/7b… ------------------------------ Message: 5 Date: Sat, 20 May 2017 15:07:04 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <DA466B25-CD12-4633-B731-5B3B12630FC0(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Unsub yourself. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:59, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work again. > > Don't ask me what is going on but then set it back for auto updates. I will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ef… ------------------------------ Message: 6 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <3E9DA26F-DC85-4AA2-9A7E-AF109E11437C(a)mccorison.com> Content-Type: text/plain; charset="us-ascii" Wow! What a polite request. I just can't try and help you fast enough. Not. Jim McCorison Orcas Island, WA > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/4f… ------------------------------ Message: 7 Date: Sat, 20 May 2017 19:29:42 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Jardy Dawson <jardy72(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGOpWuJE5WYt0n8CN9u8q9+PzH5swHspN+D6J=zBNbSFg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I have done that over 10 times now. It does not work. On Sat, May 20, 2017 at 6:06 PM, Jardy Dawson via chirp_users < chirp_users(a)intrepid.danplanet.com> wrote: > You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH > EMAIL. > > Jardy Dawson > WA7JRD Ham Radio > > Message relayed from secret Hillary Clinton server, located in the > basement of her house. OOPS, you aren't supposed to know that! > > On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> > wrote: > >> Just to ping the group again: >> >> Has anybody out there had recent luck programming the Leixen VV-898E >> using a recent build of Chirp on MacOS? >> >> >> >> On 5/2/17 0:08 AM, Steve Sergeant wrote: >> > I just installed chirp-daily-20170501.app to try. I am attempting to >> > copy setups from one Leixen VV-898E radio into several others. >> > >> > However, a fraction of a second after the screen fills with the data >> > from the radio, Chirp unexpectedly quits, and I'm given the opportunity >> > to send a report to Apple. >> > >> > My system is: >> > >> > Macbook Air 11" (MacBookAir6,1) >> > MacOS X 10.11.6 (15G1421) >> > 4GB RAM >> > >> > The last line in .chirp/debug.log reads: >> > /Users/username/Applications/chirp-daily-20170501.app/Conten >> ts/MacOS/../Resources/chirp/chirpw:143: >> > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >> > gtk.main() >> > >> > I'm using the osx-pl2303-installer.pkg for my serial driver. This is >> > currently the only radio for which I have a programming cable. >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jardy72(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/b1… ------------------------------ Message: 8 Date: Sat, 20 May 2017 19:30:55 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGYBw51s9AL8BoZuUighp_aUj05Dfj_vL9ZWKyqidhp=Q(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Tried to unsubscribe over 10 times both on the website and by sending emails. On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> >> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I >> too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I >> purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and >> never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for >> this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the >> latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work >> again. >> > Don't ask me what is going on but then set it back for auto updates. I >> will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/70… ------------------------------ Message: 9 Date: Sat, 20 May 2017 18:03:34 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <20885233-494D-4BE4-B06E-CDBE22B4C2BF(a)mccorison.com> Content-Type: text/plain; charset="utf-8" Perhaps it you reached out with a polite request along the lines of ?I?m having problems unsubscribing from this list. I?ve sent an unsubscribe request email without success and I?ve tried the website without success. Does any body have any ideas what I?m doing wrong?? Bonus points for sending it as a separate thread with s subject of something like ?Need help. Problems unsubscribing." Such an inquiry will probably get you a lot more assistance than just throwing a grenade into the mailing list. --- Jim McCorison Orcas Island, WA > On May 20, 2017, at 4:30 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Tried to unsubscribe over 10 times both on the website and by sending emails. > > On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com>> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>> wrote: > >> Unsubscribe me from this list NOW. >> >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com <mailto:rock.unroe@gmail.com>> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com <mailto:hgerhardt@wavecable.com>> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ <http://blog.nwaprs.info/> >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 <tel:(914)%20736-1350> >> Cell: 917-922-2463 <tel:(917)%20922-2463> >> Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/04… ------------------------------ Message: 10 Date: Sat, 20 May 2017 19:40:49 -0600 From: NNN Wx <nthreewx(a)gmail.com> Subject: [chirp_users] FT2D To: chirp_users(a)intrepid.danplanet.com Message-ID: <EB99DD23-C6B9-482B-AC28-220025DC2B3B(a)gmail.com> Content-Type: text/plain; charset=utf-8 I see ?bug? numbers 3325 and 3257 from last year, hoping support for Yaesu FT2D radio will work. It?s in the wish list, and doesn?t seem to need hardware for testing. I?m interested in getting chirp to work, and for some insights into how to get the serial connection to work on Macintosh OS X 10.12.5. HOW CAN I HELP (assuming this just needs effort)?? ------------------------------ Message: 11 Date: Sun, 21 May 2017 02:25:30 +0000 (UTC) From: Bob Decker <k7bd(a)yahoo.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <1930811399.2660365.1495333530472(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Your method of removal from list did not work. I must cut back mailwh9ch I do not use.? Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksBob On Saturday, May 20, 2017 12:00 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to ??? chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit ??? http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to ??? chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at ??? chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: ? 1. RepeaterBook Proximety Not Accurate? (John Kobeck) ? 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) ? 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) ? 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) ? 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) ? 6. Leixen VV-898E on MacOS? (was: ...daily-20170501??? repeatable ? ? ? crash) (Steve Sergeant) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck <johnkobeck(a)me.com> Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users(a)intrepid.danplanet.com Message-ID: <5F40902E-156A-415A-B687-A0118642A496(a)me.com> Content-Type: text/plain; charset=utf-8 Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? 73s KC2MPG ------------------------------ Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug(a)mail.gmail.com <mailto:CADnO8U7LPAPZM6s2Y6mtYQd1qz%2Bt%2BQNJR9xDXG_AAX2kbBvqug@mail.gmail.com> > Content-Type: text/plain; charset="UTF-8" On Fri, May 19, 2017 at 11:04 PM, John Kobeck <johnkobeck(a)me.com> wrote: > > Hello Chirpers; > > I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? > > 73s > KC2MPG Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved. Distance: # of repeaters 15: 50 100: 367 300: 1387 Jim KC9HI ------------------------------ Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" <hgerhardt(a)wavecable.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> Message-ID: <001301d2d17a$e7936ea0$b6ba4be0$@com> Content-Type: text/plain;??? charset="us-ascii" I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar <amnon.zohar(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important ?????? 20 ???? 2017 18:09,? "Herb Gerhardt" <hgerhardt(a)wavecable.com> ???: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10.? It worked fine on Win7 and > never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back.? I then turned off the auto driver updates for this > device.? Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect.? I checked the driver and it was still the 3.2.0.0 driver in my > listing.? It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates.? I > will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site:? http://blog.nwaprs.info/ > > > > > > -----Original Message----- > From: chirp_users-bounces(a)intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - > Pedja > Sent: Friday, May 19, 2017 1:08 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: [chirp_users] Cannot read Baofeng BF-888S > > I have strange issue with Windows 10, prolific serial adapter and BF-888S. > It reports unable to download from radio. > > Driver is proper (version 3.2.0.0, update is disabled), and Chirp works > fine > with the same adapter and other radio (Baofeng UV-B5) reading and writing. > > I tried four different BF-888S and neither can be read. > > However, when I use the same USB adapter on my old Windows XP computer, > Chirp easily reads and writes those BF-888S. > > Has anyone met with this problem? > > -- > > YT9TP, Pedja > http://www.yt9tp.iz.rs > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at amnon.zohar(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ec… ------------------------------ Message: 5 Date: Sat, 20 May 2017 11:13:04 -0500 From: "Glenn At Home" <GlennErvin(a)cableone.net> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <047601d2d183$f683cf00$0601a8c0@NUCPPYH> Content-Type: text/plain; charset="utf-8" I wonder if you did not reboot windows soon enough to solidify the change. You would think that this would not matter, but maybe Windows needs to reboot for changes such as the driver setting. Glenn I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/c0… ------------------------------ Message: 6 Date: Sat, 20 May 2017 10:59:00 -0700 From: Steve Sergeant <stevesgt(a)effable.com> Subject: [chirp_users] Leixen VV-898E on MacOS? (was: ??? ...daily-20170501??? repeatable crash) To: chirp_users(a)intrepid.danplanet.com Message-ID: <7623fd03-20f3-5351-6a42-7fc3f405c22a(a)effable.com> Content-Type: text/plain; charset=utf-8 Just to ping the group again: Has anybody out there had recent luck programming the Leixen VV-898E using a recent build of Chirp on MacOS? On 5/2/17 0:08 AM, Steve Sergeant wrote: > I just installed chirp-daily-20170501.app to try. I am attempting to > copy setups from one Leixen VV-898E radio into several others. > > However, a fraction of a second after the screen fills with the data > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > to send a report to Apple. > > My system is: > > Macbook Air 11" (MacBookAir6,1) > MacOS X 10.11.6 (15G1421) > 4GB RAM > > The last line in .chirp/debug.log reads: > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >? gtk.main() > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > currently the only radio for which I have a programming cable. ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 19 ******************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/7b… ------------------------------ Message: 12 Date: Sat, 20 May 2017 21:28:16 -0500 From: Carrie Jackson <mssjacksonifyournasty(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: Bob Decker <k7bd(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <93a354da-a162-4ad8-a2e4-25a707fed0f1@Spark> Content-Type: text/plain; charset="utf-8" Carrie Jackson liked your e-mail Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8 <https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_vi…> &uo=4&at=10l6UJ&ct=Spark_QR_viral) Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8 <https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_vi…> &uo=4&at=10l6UJ&ct=Spark_QR_viral) -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/1b… ------------------------------ Message: 13 Date: Sun, 21 May 2017 13:58:24 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <762A954A-D894-4632-A374-F805FE65E9A1(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Rich do it yourself. Read bottom of email. Sent from my iPhone > On May 20, 2017, at 5:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/ec… ------------------------------ Message: 14 Date: Sun, 21 May 2017 13:59:32 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <9FDE6A55-5F80-439E-AFFE-51E5AF484F0D(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Lol Sent from my iPhone > On May 20, 2017, at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > >> On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: >> >> Unsubscribe me from this list NOW. >> >>> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >>> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >>> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >>> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >>> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >>> > had a problem with the latest driver but would not work on Win10 till I >>> > rolled the driver back. I then turned off the auto driver updates for this >>> > device. Everything worked fine after rolling the driver back. >>> > >>> > A few months later when I tried to read the radio again, it would not >>> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >>> > listing. It took me several days till I updated the driver to the latest >>> > driver which of course did not work, but when I rolled it back again the >>> > 3.2.0.0 driver from the pick list for this device, it began to work again. >>> > Don't ask me what is going on but then set it back for auto updates. I will >>> > now just roll the driver back every time I want to use this cable. >>> > >>> > I suggest you try to update your driver and then roll it back again to >>> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >>> > worth a try since it worked for me. >>> > >>> > >>> > Herb, KB7UVC >>> > NW APRS Group, West Sound Coordinator >>> > Our WEB Site: http://blog.nwaprs.info/ >>> >>> There is no need to disable updates. If Windows does update your >>> Prolific driver, the previous driver is still installed. All you have >>> to do is go into Device Manager and re-select the driver version that >>> you want to use. I keep several Prolific driver versions installed and >>> switch between then at will for testing purposes. >>> >>> Jim KC9HI >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Rich at rbakedq(a)gmail.com >>> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 >> Cell: 917-922-2463 >> Email: rbakedq(a)gmail.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to K2SON at jimmcc(a)mccorison.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/16… ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 20 ******************************************** _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Stuart Rauh at stuart(a)rauhnet.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20
by roland kelts 23 May '17

23 May '17

people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!! -------------------------------------------- On Sun, 5/21/17, <chirp_users-request(a)intrepid.danplanet.com> wrote: Subject: chirp_users Digest, Vol 101, Issue 20 To: chirp_users(a)intrepid.danplanet.com Date: Sunday, May 21, 2017, 12:00 PM Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Cannot read Baofeng BF-888S (Jim Unroe) 2. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 3. Re: Cannot read Baofeng BF-888S (Rich Baker) 4. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Jardy Dawson) 5. Re: Cannot read Baofeng BF-888S (Jardy Dawson) 6. Re: Cannot read Baofeng BF-888S (Jim McCorison) 7. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 8. Re: Cannot read Baofeng BF-888S (Rich Baker) 9. Re: Cannot read Baofeng BF-888S (Jim McCorison) 10. FT2D (NNN Wx) 11. Re: chirp_users Digest, Vol 101, Issue 19 (Bob Decker) 12. Re: chirp_users Digest, Vol 101, Issue 19 (Carrie Jackson) 13. Re: Cannot read Baofeng BF-888S (Joe Puma) 14. Re: Cannot read Baofeng BF-888S (Joe Puma) ---------------------------------------------------------------------- Message: 1 Date: Sat, 20 May 2017 15:36:37 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U4_wsaCLet=nu=0a90pNzdt=DQc+i7v0b_A_xXK9CTowA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back. I then turned off the auto driver updates for this > device. Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect. I checked the driver and it was still the 3.2.0.0 driver in my > listing. It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates. I will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site: http://blog.nwaprs.info/ There is no need to disable updates. If Windows does update your Prolific driver, the previous driver is still installed. All you have to do is go into Device Manager and re-select the driver version that you want to use. I keep several Prolific driver versions installed and switch between then at will for testing purposes. Jim KC9HI -------------- next part -------------- A non-text attachment was scrubbed... Name: ProlificDrivers2.jpg Type: image/jpeg Size: 161541 bytes Desc: not available Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/40… ------------------------------ Message: 2 Date: Sat, 20 May 2017 17:58:49 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/ > Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/00… ------------------------------ Message: 3 Date: Sat, 20 May 2017 17:59:05 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> > wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I > too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I > purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and > never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for > this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work > again. > > Don't ask me what is going on but then set it back for auto updates. I > will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/3e… ------------------------------ Message: 4 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <E64697DE-5BA1-4595-AC56-99B0663E9B06(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH EMAIL. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/7b… ------------------------------ Message: 5 Date: Sat, 20 May 2017 15:07:04 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <DA466B25-CD12-4633-B731-5B3B12630FC0(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Unsub yourself. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:59, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work again. > > Don't ask me what is going on but then set it back for auto updates. I will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ef… ------------------------------ Message: 6 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <3E9DA26F-DC85-4AA2-9A7E-AF109E11437C(a)mccorison.com> Content-Type: text/plain; charset="us-ascii" Wow! What a polite request. I just can't try and help you fast enough. Not. Jim McCorison Orcas Island, WA > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/4f… ------------------------------ Message: 7 Date: Sat, 20 May 2017 19:29:42 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Jardy Dawson <jardy72(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGOpWuJE5WYt0n8CN9u8q9+PzH5swHspN+D6J=zBNbSFg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I have done that over 10 times now. It does not work. On Sat, May 20, 2017 at 6:06 PM, Jardy Dawson via chirp_users < chirp_users(a)intrepid.danplanet.com> wrote: > You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH > EMAIL. > > Jardy Dawson > WA7JRD Ham Radio > > Message relayed from secret Hillary Clinton server, located in the > basement of her house. OOPS, you aren't supposed to know that! > > On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> > wrote: > >> Just to ping the group again: >> >> Has anybody out there had recent luck programming the Leixen VV-898E >> using a recent build of Chirp on MacOS? >> >> >> >> On 5/2/17 0:08 AM, Steve Sergeant wrote: >> > I just installed chirp-daily-20170501.app to try. I am attempting to >> > copy setups from one Leixen VV-898E radio into several others. >> > >> > However, a fraction of a second after the screen fills with the data >> > from the radio, Chirp unexpectedly quits, and I'm given the opportunity >> > to send a report to Apple. >> > >> > My system is: >> > >> > Macbook Air 11" (MacBookAir6,1) >> > MacOS X 10.11.6 (15G1421) >> > 4GB RAM >> > >> > The last line in .chirp/debug.log reads: >> > /Users/username/Applications/chirp-daily-20170501.app/Conten >> ts/MacOS/../Resources/chirp/chirpw:143: >> > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >> > gtk.main() >> > >> > I'm using the osx-pl2303-installer.pkg for my serial driver. This is >> > currently the only radio for which I have a programming cable. >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jardy72(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/b1… ------------------------------ Message: 8 Date: Sat, 20 May 2017 19:30:55 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGYBw51s9AL8BoZuUighp_aUj05Dfj_vL9ZWKyqidhp=Q(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Tried to unsubscribe over 10 times both on the website and by sending emails. On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> >> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I >> too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I >> purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and >> never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for >> this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the >> latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work >> again. >> > Don't ask me what is going on but then set it back for auto updates. I >> will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/70… ------------------------------ Message: 9 Date: Sat, 20 May 2017 18:03:34 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <20885233-494D-4BE4-B06E-CDBE22B4C2BF(a)mccorison.com> Content-Type: text/plain; charset="utf-8" Perhaps it you reached out with a polite request along the lines of ?I?m having problems unsubscribing from this list. I?ve sent an unsubscribe request email without success and I?ve tried the website without success. Does any body have any ideas what I?m doing wrong?? Bonus points for sending it as a separate thread with s subject of something like ?Need help. Problems unsubscribing." Such an inquiry will probably get you a lot more assistance than just throwing a grenade into the mailing list. --- Jim McCorison Orcas Island, WA > On May 20, 2017, at 4:30 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Tried to unsubscribe over 10 times both on the website and by sending emails. > > On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com>> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>> wrote: > >> Unsubscribe me from this list NOW. >> >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com <mailto:rock.unroe@gmail.com>> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com <mailto:hgerhardt@wavecable.com>> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ <http://blog.nwaprs.info/> >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 <tel:(914)%20736-1350> >> Cell: 917-922-2463 <tel:(917)%20922-2463> >> Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/04… ------------------------------ Message: 10 Date: Sat, 20 May 2017 19:40:49 -0600 From: NNN Wx <nthreewx(a)gmail.com> Subject: [chirp_users] FT2D To: chirp_users(a)intrepid.danplanet.com Message-ID: <EB99DD23-C6B9-482B-AC28-220025DC2B3B(a)gmail.com> Content-Type: text/plain; charset=utf-8 I see ?bug? numbers 3325 and 3257 from last year, hoping support for Yaesu FT2D radio will work. It?s in the wish list, and doesn?t seem to need hardware for testing. I?m interested in getting chirp to work, and for some insights into how to get the serial connection to work on Macintosh OS X 10.12.5. HOW CAN I HELP (assuming this just needs effort)?? ------------------------------ Message: 11 Date: Sun, 21 May 2017 02:25:30 +0000 (UTC) From: Bob Decker <k7bd(a)yahoo.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <1930811399.2660365.1495333530472(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Your method of removal from list did not work. I must cut back mailwh9ch I do not use.? Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksBob On Saturday, May 20, 2017 12:00 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to ??? chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit ??? http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to ??? chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at ??? chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: ? 1. RepeaterBook Proximety Not Accurate? (John Kobeck) ? 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) ? 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) ? 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) ? 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) ? 6. Leixen VV-898E on MacOS? (was: ...daily-20170501??? repeatable ? ? ? crash) (Steve Sergeant) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck <johnkobeck(a)me.com> Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users(a)intrepid.danplanet.com Message-ID: <5F40902E-156A-415A-B687-A0118642A496(a)me.com> Content-Type: text/plain; charset=utf-8 Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? 73s KC2MPG ------------------------------ Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Fri, May 19, 2017 at 11:04 PM, John Kobeck <johnkobeck(a)me.com> wrote: > > Hello Chirpers; > > I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? > > 73s > KC2MPG Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved. Distance: # of repeaters 15: 50 100: 367 300: 1387 Jim KC9HI ------------------------------ Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" <hgerhardt(a)wavecable.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> Message-ID: <001301d2d17a$e7936ea0$b6ba4be0$@com> Content-Type: text/plain;??? charset="us-ascii" I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar <amnon.zohar(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important ?????? 20 ???? 2017 18:09,? "Herb Gerhardt" <hgerhardt(a)wavecable.com> ???: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10.? It worked fine on Win7 and > never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back.? I then turned off the auto driver updates for this > device.? Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect.? I checked the driver and it was still the 3.2.0.0 driver in my > listing.? It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates.? I > will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site:? http://blog.nwaprs.info/ > > > > > > -----Original Message----- > From: chirp_users-bounces(a)intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - > Pedja > Sent: Friday, May 19, 2017 1:08 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: [chirp_users] Cannot read Baofeng BF-888S > > I have strange issue with Windows 10, prolific serial adapter and BF-888S. > It reports unable to download from radio. > > Driver is proper (version 3.2.0.0, update is disabled), and Chirp works > fine > with the same adapter and other radio (Baofeng UV-B5) reading and writing. > > I tried four different BF-888S and neither can be read. > > However, when I use the same USB adapter on my old Windows XP computer, > Chirp easily reads and writes those BF-888S. > > Has anyone met with this problem? > > -- > > YT9TP, Pedja > http://www.yt9tp.iz.rs > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at amnon.zohar(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/ec… ------------------------------ Message: 5 Date: Sat, 20 May 2017 11:13:04 -0500 From: "Glenn At Home" <GlennErvin(a)cableone.net> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <047601d2d183$f683cf00$0601a8c0@NUCPPYH> Content-Type: text/plain; charset="utf-8" I wonder if you did not reboot windows soon enough to solidify the change. You would think that this would not matter, but maybe Windows needs to reboot for changes such as the driver setting. Glenn I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/c0… ------------------------------ Message: 6 Date: Sat, 20 May 2017 10:59:00 -0700 From: Steve Sergeant <stevesgt(a)effable.com> Subject: [chirp_users] Leixen VV-898E on MacOS? (was: ??? ...daily-20170501??? repeatable crash) To: chirp_users(a)intrepid.danplanet.com Message-ID: <7623fd03-20f3-5351-6a42-7fc3f405c22a(a)effable.com> Content-Type: text/plain; charset=utf-8 Just to ping the group again: Has anybody out there had recent luck programming the Leixen VV-898E using a recent build of Chirp on MacOS? On 5/2/17 0:08 AM, Steve Sergeant wrote: > I just installed chirp-daily-20170501.app to try. I am attempting to > copy setups from one Leixen VV-898E radio into several others. > > However, a fraction of a second after the screen fills with the data > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > to send a report to Apple. > > My system is: > > Macbook Air 11" (MacBookAir6,1) > MacOS X 10.11.6 (15G1421) > 4GB RAM > > The last line in .chirp/debug.log reads: > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >? gtk.main() > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > currently the only radio for which I have a programming cable. ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 19 ******************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/7b… ------------------------------ Message: 12 Date: Sat, 20 May 2017 21:28:16 -0500 From: Carrie Jackson <mssjacksonifyournasty(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: Bob Decker <k7bd(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <93a354da-a162-4ad8-a2e4-25a707fed0f1@Spark> Content-Type: text/plain; charset="utf-8" Carrie Jackson liked your e-mail Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_vi…) Spark by Readdle (https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spark_QR_vi…) -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/1b… ------------------------------ Message: 13 Date: Sun, 21 May 2017 13:58:24 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <762A954A-D894-4632-A374-F805FE65E9A1(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Rich do it yourself. Read bottom of email. Sent from my iPhone > On May 20, 2017, at 5:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/ec… ------------------------------ Message: 14 Date: Sun, 21 May 2017 13:59:32 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <9FDE6A55-5F80-439E-AFFE-51E5AF484F0D(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Lol Sent from my iPhone > On May 20, 2017, at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > >> On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: >> >> Unsubscribe me from this list NOW. >> >>> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >>> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >>> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >>> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >>> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >>> > had a problem with the latest driver but would not work on Win10 till I >>> > rolled the driver back. I then turned off the auto driver updates for this >>> > device. Everything worked fine after rolling the driver back. >>> > >>> > A few months later when I tried to read the radio again, it would not >>> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >>> > listing. It took me several days till I updated the driver to the latest >>> > driver which of course did not work, but when I rolled it back again the >>> > 3.2.0.0 driver from the pick list for this device, it began to work again. >>> > Don't ask me what is going on but then set it back for auto updates. I will >>> > now just roll the driver back every time I want to use this cable. >>> > >>> > I suggest you try to update your driver and then roll it back again to >>> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >>> > worth a try since it worked for me. >>> > >>> > >>> > Herb, KB7UVC >>> > NW APRS Group, West Sound Coordinator >>> > Our WEB Site: http://blog.nwaprs.info/ >>> >>> There is no need to disable updates. If Windows does update your >>> Prolific driver, the previous driver is still installed. All you have >>> to do is go into Device Manager and re-select the driver version that >>> you want to use. I keep several Prolific driver versions installed and >>> switch between then at will for testing purposes. >>> >>> Jim KC9HI >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Rich at rbakedq(a)gmail.com >>> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 >> Cell: 917-922-2463 >> Email: rbakedq(a)gmail.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to K2SON at jimmcc(a)mccorison.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170521/16… ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 20 ********************************************

4 3

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20
by Kc6iih＠aol.com 22 May '17

22 May '17

I use Windows 10 , no problems Jock In a message dated 5/22/2017 8:00:14 P.M. Pacific Daylight Time, GlennErvin(a)cableone.net writes: I had a brainstorm today... Windows 10, 64 bit version, allows for installing bash, in fact, it is a Microsoft version of Linux. You can install Linux programs too. I'd be willing to bet that Chirp in the CLI would work in that environment. And then Windows 10 folks could have a better experience. Glenn ----- Original Message ----- From: "roland kelts via chirp_users" <chirp_users(a)intrepid.danplanet.com> To: <chirp_users(a)intrepid.danplanet.com> Sent: Monday, May 22, 2017 9:20 PM Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 20 people seem to have all kinds of problems with windows 10 maybe the whole system for that o.s. needs to be rewritten i couldn't get chirp to work at all wouldn't even load . Solution i found and old abandoned computer (dell) with an earlier os and now everything works!!! -------------------------------------------- On Sun, 5/21/17, <chirp_users-request(a)intrepid.danplanet.com> wrote: Subject: chirp_users Digest, Vol 101, Issue 20 To: chirp_users(a)intrepid.danplanet.com Date: Sunday, May 21, 2017, 12:00 PM Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Cannot read Baofeng BF-888S (Jim Unroe) 2. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 3. Re: Cannot read Baofeng BF-888S (Rich Baker) 4. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Jardy Dawson) 5. Re: Cannot read Baofeng BF-888S (Jardy Dawson) 6. Re: Cannot read Baofeng BF-888S (Jim McCorison) 7. Re: Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Rich Baker) 8. Re: Cannot read Baofeng BF-888S (Rich Baker) 9. Re: Cannot read Baofeng BF-888S (Jim McCorison) 10. FT2D (NNN Wx) 11. Re: chirp_users Digest, Vol 101, Issue 19 (Bob Decker) 12. Re: chirp_users Digest, Vol 101, Issue 19 (Carrie Jackson) 13. Re: Cannot read Baofeng BF-888S (Joe Puma) 14. Re: Cannot read Baofeng BF-888S (Joe Puma) ---------------------------------------------------------------------- Message: 1 Date: Sat, 20 May 2017 15:36:37 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U4_wsaCLet=nu=0a90pNzdt=DQc+i7v0b_A_xXK9CTowA(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back. I then turned off the auto driver updates for this > device. Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect. I checked the driver and it was still the 3.2.0.0 driver in my > listing. It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates. I will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site: http://blog.nwaprs.info/ There is no need to disable updates. If Windows does update your Prolific driver, the previous driver is still installed. All you have to do is go into Device Manager and re-select the driver version that you want to use. I keep several Prolific driver versions installed and switch between then at will for testing purposes. Jim KC9HI -------------- next part -------------- A non-text attachment was scrubbed... Name: ProlificDrivers2.jpg Type: image/jpeg Size: 161541 bytes Desc: not available Url : http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/40a b39a9/attachment-0001.jpg ------------------------------ Message: 2 Date: Sat, 20 May 2017 17:58:49 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPHggmTKrpxz-nTzfz-m2RxrEts0WSatBGaV3zZMA6V1ng(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/ > Contents/MacOS/../Resources/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/00d 7f0f7/attachment-0001.html ------------------------------ Message: 3 Date: Sat, 20 May 2017 17:59:05 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPEYTesu5jWmSHgqmF70N6MrjqCZfYx0GmpYybU4fz4iQQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Unsubscribe me from this list NOW. On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> > wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I > too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I > purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and > never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for > this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work > again. > > Don't ask me what is going on but then set it back for auto updates. I > will > > now just roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://intrepid.danplanet.com/pipermail/chirp_users/attachments/20170520/3ef 22303/attachment-0001.html ------------------------------ Message: 4 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <E64697DE-5BA1-4595-AC56-99B0663E9B06(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH EMAIL. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> wrote: > Just to ping the group again: > > Has anybody out there had recent luck programming the Leixen VV-898E > using a recent build of Chirp on MacOS? > > > > On 5/2/17 0:08 AM, Steve Sergeant wrote: > > I just installed chirp-daily-20170501.app to try. I am attempting to > > copy setups from one Leixen VV-898E radio into several others. > > > > However, a fraction of a second after the screen fills with the data > > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > > to send a report to Apple. > > > > My system is: > > > > Macbook Air 11" (MacBookAir6,1) > > MacOS X 10.11.6 (15G1421) > > 4GB RAM > > > > The last line in .chirp/debug.log reads: > > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Reso urces/chirp/chirpw:143: > > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() > > gtk.main() > > > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > > currently the only radio for which I have a programming cable. > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72@yahoo .com To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 5 Date: Sat, 20 May 2017 15:07:04 -0700 From: Jardy Dawson <jardy72(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <DA466B25-CD12-4633-B731-5B3B12630FC0(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Unsub yourself. Jardy Dawson WA7JRD Ham Radio Message relayed from secret Hillary Clinton server, located in the basement of her house. OOPS, you aren't supposed to know that! On May 20, 2017, at 14:59, Rich Baker <rbakedq(a)gmail.com> wrote: Unsubscribe me from this list NOW. > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: > > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never > > had a problem with the latest driver but would not work on Win10 till I > > rolled the driver back. I then turned off the auto driver updates for this > > device. Everything worked fine after rolling the driver back. > > > > A few months later when I tried to read the radio again, it would not > > connect. I checked the driver and it was still the 3.2.0.0 driver in my > > listing. It took me several days till I updated the driver to the latest > > driver which of course did not work, but when I rolled it back again the > > 3.2.0.0 driver from the pick list for this device, it began to work again. > > Don't ask me what is going on but then set it back for auto updates. I will > > now ju st roll the driver back every time I want to use this cable. > > > > I suggest you try to update your driver and then roll it back again to > > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > > worth a try since it worked for me. > > > > > > Herb, KB7UVC > > NW APRS Group, West Sound Coordinator > > Our WEB Site: http://blog.nwaprs.info/ > > There is no need to disable updates. If Windows does update your > Prolific driver, the previous driver is still installed. All you have > to do is go into Device Manager and re-select the driver version that > you want to use. I keep several Prolific driver versions installed and > switch between then at will for testing purposes. > > Jim KC9HI > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_ users-unsubscribe(a)intrepid.danplanet.com -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at jardy72(a)yahoo.com To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 6 Date: Sat, 20 May 2017 15:06:24 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <3E9DA26F-DC85-4AA2-9A7E-AF109E11437C(a)mccorison.com> Content-Type: text/plain; charset ="us-ascii" Wow! What a polite request. I just can't try and help you fast enough. Not. Jim McCorison Orcas Island, WA > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still th e 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific dr iver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.c om/pipermail/chirp_users/attachments/20170520/4f76cc98/attachment-0001.html ------------------------------ Message: 7 Date: Sat, 20 May 2017 19:29:42 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) To: Jardy Dawson <jardy72(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGOpWuJE5WYt0n8CN9u8q9+PzH5swHspN+D6J=zBNbSFg(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I have done that over 10 times now. It does not work. On Sat, May 20, 2017 at 6:06 PM, Jardy Dawson via chirp_users < chirp_users(a)intrepid.danplanet.com> wrote: > You have to do that yourself by READING THE LINKS AT THE BOTTOM OF EACH > EMAIL. > > Jardy Dawson > WA7JRD Ham Radio > > Message relayed from secret Hillary Clinton server, located in the > basement of her house. OOPS, you aren't supposed to know that! > > On May 20, 2017, at 14:58, Rich Baker <rbakedq(a)gmail.com> wro te: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 1:59 PM, Steve Sergeant <stevesgt(a)effable.com> > wrote: > >> Just to ping the group again: >> >> Has anybody out there had recent luck programming the Leixen VV-898E >> using a recent build of Chirp on MacOS? >> >> >> >> On 5/2/17 0:08 AM, Steve Sergeant wrote: >> > I just installed chirp-daily-20170501.app to try. I am attempting to >> > copy setups from one Leixen VV-898E radio into several others. >> > >> > However, a fraction of a second after the screen fills with the data >> > from the radio, Chirp unexpectedly quits, and I'm given the opportunity >> > to send a report to Apple. >> > >> > My system is: >> > >> > Macbook Air 11" (MacBookAir6,1) >> > MacOS X 10.11.6 (15G1421) >> > 4GB RAM >> > >> > The last line in .chirp/debug.log reads: >> > /Users/username/Applications/chirp-daily-20170501.app/Conten >> ts/MacOS/../Resources/chirp/chirpw:143: >> > PangoWarning: Invalid UTF-8 string passed to pango_ layout_set_text() >> > gtk.main() >> > >> > I'm using the osx-pl2303-installer.pkg for my serial driver. This is >> > currently the only radio for which I have a programming cable. >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Jardy at jardy72(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > i ntrepid.danplanet.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 8 Date: Sat, 20 May 2017 19:30:55 -0400 From: Rich Baker <rbakedq(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAELWbPGYBw51s9AL8BoZuUighp_aUj05Dfj_vL9ZWKyqidhp=Q(a)mail.gmail.com> Content-Type: text/plai n; charset="utf-8" Tried to unsubscribe over 10 times both on the website and by sending emails. On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > > On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> >> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I >> too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I >> purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and >> never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for >> this >> > devi ce. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the >> latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work >> again. >> > Don't ask me what is going on but then set it back for auto updates. I >> will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does upd ate your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe@intrep >> id.danplanet.com >> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 <(914)%20736-1350> > Cell: 917-922-2463 <(917)%20922-2463> > Email: rbakedq(a)gmail.com > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_use rs > This message was sent to K2SON at jimmcc(a)mccorison.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Rich at rbakedq(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -- S. Richard Baker 250 Furnace Dock Road Cortlandt Manor, NY 10567 Home: 914-736-1350 Cell: 917-922-2463 Email: rbakedq(a)gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… cc1511/attachment-0001.html ------------------------------ Message: 9 Date: Sat, 20 May 2017 18:03:34 -0700 From: Jim McCorison <jimmcc(a)mccorison.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_use rs(a)intrepid.danplanet.com> Message-ID: <20885233-494D-4BE4-B06E-CDBE22B4C2BF(a)mccorison.com> Content-Type: text/plain; charset="utf-8" Perhaps it you reached out with a polite request along the lines of ?I?m having problems unsubscribing from this list. I?ve sent an unsubscribe request email without success and I?ve tried the website without success. Does any body have any ideas what I?m doing wrong?? Bonus points for sending it as a separate thread with s subject of something like ?Need help. Problems unsubscribing." Such an inquiry will probably get you a lot more assistance than just throwing a grenade into the mailing list. --- Jim McCorison Orcas Island, WA > On May 20, 2017, at 4:30 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Tried to unsubscribe over 10 times both on the website and by sending emails. > > On Sat, May 20, 2017 at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com>> wrote: > Wow! What a polite request. I just can't try and help y ou fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > > On May 20, 2017, at 2:59 PM, Rich Baker <rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>> wrote: > >> Unsubscribe me from this list NOW. >> >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com <mailto:rock.unroe@gmail.com>> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com <mailto:hgerhardt@wavecable.com>> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I c hecked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West Sound Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ <http://blog.nwaprs.info/> >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the dr iver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 <tel:(914)%20736-1350> >> Cell: 917-922-2463 <tel:(917)%20922-2463> >> Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ >> chirp_users mailing list >> chirp_ users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> >> This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to Rich at rbakedq(a)gmail.com <mailto:rbakedq@gmail.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Ma nor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com <mailto:rbakedq@gmail.com>_______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users <http://intrepid.danplanet.com/mailman/listinfo/chirp_users> > This message was sent to K2SON at jimmcc(a)mccorison.com <mailto:jimmcc@mccorison.com> > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 10 Date: Sat, 20 May 2017 19:40:49 -0600 From: NNN Wx <nthreewx(a)gmail.com> Subject: [chirp_users] FT2D To: chirp_users(a)intrepid.danplanet.com Message-ID: <EB99DD23-C6B9-482B-AC28-220025DC2B3B(a)gmail.com> Content-Type: text/plain; charset=utf-8 I see ?bug? numbers 3325 and 3257 from last year, hoping support for Yaesu FT2D radio will work. It?s in the wish list, and doesn?t seem to need hardware for testing. I?m interested in getting chirp to work, and for some insights into how to get the serial connection to work on Macintosh OS X 10.12.5. HOW CAN I HELP (assuming this just needs effort)?? ------------------------------ Message: 11 Date: Sun, 21 May 2017 02:25:30 +0000 (UTC) From: Bob Decker <k7bd(a)yahoo.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Message-ID: <1930811399.2660365.1495333530472(a)mail.yahoo.com> Content-Type: text/plain; charset="utf-8" Your method of removal from list did not work. I must cut back mailwh9ch I do not use.? Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksB ob On Saturday, May 20, 2017 12:00 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to ??? chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit ??? http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to ??? chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at ??? chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: ? 1. RepeaterBook Proximety Not Accurate? (John Kobeck) ? 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) ? 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) ? 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) ? 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) ? 6. Leixen VV-898E on MacOS? (was: ...daily-20 170501??? repeatable ? ? ? crash) (Steve Sergeant) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck <johnkobeck(a)me.com> Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users(a)intrepid.danplanet.com Message-ID: <5F40902E-156A-415A-B687-A0118642A496(a)me.com> Content-Type: text/plain; charset=utf-8 Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? 73s KC2MPG ------------------------------ Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP <c hirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Fri, May 19, 2017 at 11:04 PM, John Kobeck <johnkobeck(a)me.com> wrote: > > Hello Chirpers; > > I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan? zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? > > 73s > KC2MPG Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved. Distance: # of repeaters 15: 50 100: 367 300: 1387 Jim KC9HI ------------------------------ Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" <hgerhardt(a)wavecable.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> Message-ID: <001301d2d17a$e7936ea0$b6ba4be0$@com> Content-Type: text/plain;??? charset="us-ascii" I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar <amnon.zohar(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: ??? <CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important ?????? 20 ???? 2017 18:09,? "Herb Gerhardt" <hgerhardt(a)wavecable.com> ???: > I hav e been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10.? It worked fine on Win7 and > never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back.? I then turned off the auto driver updates for this > device.? Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect.? I checked the driver and it was still the 3.2.0.0 driver in my > listing.? It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates.? I > will > now just roll the driver back every time I want to use this cable. > > I suggest y ou try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site:? http://blog.nwaprs.info/ > > > > > > -----Original Message----- > From: chirp_users-bounces(a)intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - > Pedja > Sent: Friday, May 19, 2017 1:08 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: [chirp_users] Cannot read Baofeng BF-888S > > I have strange issue with Windows 10, prolific serial adapter and BF-888S. > It reports unable to download from radio. > > Driver is proper (version 3.2.0.0, update is disabled), and Chirp works > fine > with the same adapter and other radio (Baofeng UV-B5) reading and writing. > > I tried four different BF-888S and neither can be read. > > However, when I use the same USB adapter on my old Windows XP co mputer, > Chirp easily reads and writes those BF-888S. > > Has anyone met with this problem? > > -- > > YT9TP, Pedja > http://www.yt9tp.iz.rs > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at amnon.zohar(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com > -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ent-0001.html ------------------------------ Message: 5 Date: Sat, 20 May 2017 11:13:04 -0500 From: "Glenn At Home" <GlennErvin(a)cableone.net> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "Discussion of CHIRP" <chirp_users@intr epid.danplanet.com> Message-ID: <047601d2d183$f683cf00$0601a8c0@NUCPPYH> Content-Type: text/plain; charset="utf-8" I wonder if you did not reboot windows soon enough to solidify the change. You would think that this would not matter, but maybe Windows needs to reboot for changes such as the driver setting. Glenn I have been fighting similar problems on Win10 on my Baofeng UV-5R+.? I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10.? It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back.? I then turned off the auto driver updates for this device.? Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect.? I checked the driver and it was still the 3.2.0.0 driver in my listing.? It took me several days till I updated the driver to the latest driver which of co urse did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates.? I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you.? I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site:? http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is di sabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar(a)gmail.com To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com -------------------------------------------------------------------------------- _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/list info/chirp_users This message was sent to Glenn at glennervin(a)cableone.net To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 6 Date: Sat, 20 May 2017 10:59:00 -0700 From: Steve Sergeant <stevesgt(a)effable.com> Subject: [chirp_users] Leixen VV-898E on MacOS? (was: ??? ...daily-20170501??? repeatable crash) To: chirp_users(a)intrepid.danplanet.com Message-ID: <7623fd03-20f3-5351-6a42-7fc3f405c22a(a)effable.com> Content-Type: text/plain; charset=utf-8 Just to ping the group again: Has anybody out there had recent luck programming the Leixen VV-898E using a recent build of Chirp on MacOS? On 5/2/17 0:08 AM, Steve Sergeant wrote: > I just installed chirp-daily-20170501.app to try. I am attempting to > copy setups from one Leixen VV-898E r adio into several others. > > However, a fraction of a second after the screen fills with the data > from the radio, Chirp unexpectedly quits, and I'm given the opportunity > to send a report to Apple. > > My system is: > > Macbook Air 11" (MacBookAir6,1) > MacOS X 10.11.6 (15G1421) > 4GB RAM > > The last line in .chirp/debug.log reads: > /Users/username/Applications/chirp-daily-20170501.app/Contents/MacOS/../Resources/chirp/chirpw:143: > PangoWarning: Invalid UTF-8 string passed to pango_layout_set_text() >? gtk.main() > > I'm using the osx-pl2303-installer.pkg for my serial driver. This is > currently the only radio for which I have a programming cable. ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 19 *** ***************************************** -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ------------------------------ Message: 12 Date: Sat, 20 May 2017 21:28:16 -0500 From: Carrie Jackson <mssjacksonifyournasty(a)gmail.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19 To: Bob Decker <k7bd(a)yahoo.com>, Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <93a354da-a162-4ad8-a2e4-25a707fed0f1@Spark> Content-Type: text/plain; charset="utf-8" Carrie Jackson liked your e-mail Spark by Readdle(https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spa… Spark by Readdle(https://itunes.apple.com/app/id997102246?mt=8&uo=4&at=10l6UJ&ct=Spa… -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017 0520/1bba98f9/attachment-0001.html ------------------------------ Message: 13 Date: Sun, 21 May 2017 13:58:24 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <762A954A-D894-4632-A374-F805FE65E9A1(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Rich do it yourself. Read bottom of email. Sent from my iPhone > On May 20, 2017, at 5:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: > > Unsubscribe me from this list NOW. > >> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >> > had a problem with the latest driver but would not work on Win10 till I >> > rolled the driver back. I then turned off the auto driver updates for this >> > device. Everything worked fine after rolling the driver back. >> > >> > A few months later when I tried to read the radio again, it would not >> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >> > listing. It took me several days till I updated the driver to the latest >> > driver which of course did not work, but when I rolled it back again the >> > 3.2.0.0 driver from the pick list for this device, it began to work again. >> > Don't ask me what is going on but then set it back for auto updates. I will >> > now just roll the driver back every time I want to use this cable. >> > >> > I suggest you try to update your driver and then roll it back again to >> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >> > worth a try since it worked for me. >> > >> > >> > Herb, KB7UVC >> > NW APRS Group, West So und Coordinator >> > Our WEB Site: http://blog.nwaprs.info/ >> >> There is no need to disable updates. If Windows does update your >> Prolific driver, the previous driver is still installed. All you have >> to do is go into Device Manager and re-select the driver version that >> you want to use. I keep several Prolific driver versions installed and >> switch between then at will for testing purposes. >> >> Jim KC9HI >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Rich at rbakedq(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > > > -- > S. Richard Baker > 250 Furnace Dock Road > Cortlandt Manor, NY 10567 > > Home: 914-736-1350 > Cell: 917-922-2463 > Email: rbakedq(a)gmail.com > _______________________________________________ > chirp_users mailing list > chirp_users@intrep id.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… ec3050d6/attachment-0001.html ------------------------------ Message: 14 Date: Sun, 21 May 2017 13:59:32 -0400 From: Joe Puma <theprogramllc(a)yahoo.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <9FDE6A55-5F80-439E-AFFE-51E5AF484F0D(a)yahoo.com> Content-Type: text/plain; charset="us-ascii" Lol Sent from my iPhone > On May 20, 2017, at 6:06 PM, Jim McCorison <jimmcc(a)mccorison.com> wrote: > > Wow! What a polite request. I just can't try and help you fast enough. > > Not. > > Jim McCorison > Orcas Island, WA > >> On May 20, 2017 , at 2:59 PM, Rich Baker <rbakedq(a)gmail.com> wrote: >> >> Unsubscribe me from this list NOW. >> >>> On Sat, May 20, 2017 at 3:36 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: >>> On Sat, May 20, 2017 at 11:08 AM, Herb Gerhardt <hgerhardt(a)wavecable.com> wrote: >>> > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too >>> > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase >>> > from HRO to work once I upgraded to Win10. It worked fine on Win7 and never >>> > had a problem with the latest driver but would not work on Win10 till I >>> > rolled the driver back. I then turned off the auto driver updates for this >>> > device. Everything worked fine after rolling the driver back. >>> > >>> > A few months later when I tried to read the radio again, it would not >>> > connect. I checked the driver and it was still the 3.2.0.0 driver in my >>> > listing. It took me several days till I updated the driver to the latest >>> > driver which o f course did not work, but when I rolled it back again the >>> > 3.2.0.0 driver from the pick list for this device, it began to work again. >>> > Don't ask me what is going on but then set it back for auto updates. I will >>> > now just roll the driver back every time I want to use this cable. >>> > >>> > I suggest you try to update your driver and then roll it back again to >>> > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is >>> > worth a try since it worked for me. >>> > >>> > >>> > Herb, KB7UVC >>> > NW APRS Group, West Sound Coordinator >>> > Our WEB Site: http://blog.nwaprs.info/ >>> >>> There is no need to disable updates. If Windows does update your >>> Prolific driver, the previous driver is still installed. All you have >>> to do is go into Device Manager and re-select the driver version that >>> you want to use. I keep several Prolific driver versions installed and >>> switch between then at will for testing purposes. >>> >>> Jim KC9HI >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Rich at rbakedq(a)gmail.com >>> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >> >> >> >> -- >> S. Richard Baker >> 250 Furnace Dock Road >> Cortlandt Manor, NY 10567 >> >> Home: 914-736-1350 >> Cell: 917-922-2463 >> Email: rbakedq(a)gmail.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to K2SON at jimmcc(a)mccorison.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joe Puma at theprogramllc(a)yahoo.com > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -------------- next part -------------- An HTML attachment was scrubbed... URL:http://intrepid.danplanet.com/pipermail/chirp_users/attachments/2017052… tachment-0001.html ------------------------------ _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com End of chirp_users Digest, Vol 101, Issue 20 ********************************************_______________________________________________chirp_users mailing listchirp_users@intrepid.danplanet.comhttp://intrepid.danplanet.com/mailman/listinfo/chirp_usersThis message was sent to Glenn at glennervin(a)cableone.netTo unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jock at kc6iih(a)aol.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Cannot read Baofeng BF-888S
by YT9TP - Pedja 21 May '17

21 May '17

I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

15 20

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 19
by Bob Decker 20 May '17

20 May '17

Your method of removal from list did not work. I must cut back mailwh9ch I do not use. Remove my address. The only other way to remove youre-mail by listing it as spam.ThanksBob On Saturday, May 20, 2017 12:00 PM, "chirp_users-request(a)intrepid.danplanet.com" <chirp_users-request(a)intrepid.danplanet.com> wrote: Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. RepeaterBook Proximety Not Accurate? (John Kobeck) 2. Re: RepeaterBook Proximety Not Accurate? (Jim Unroe) 3. Re: Cannot read Baofeng BF-888S (Herb Gerhardt) 4. Re: Cannot read Baofeng BF-888S (Amnon Zohar) 5. Re: Cannot read Baofeng BF-888S (Glenn At Home) 6. Leixen VV-898E on MacOS? (was: ...daily-20170501 repeatable crash) (Steve Sergeant) ---------------------------------------------------------------------- Message: 1 Date: Fri, 19 May 2017 23:04:47 -0400 From: John Kobeck <johnkobeck(a)me.com> Subject: [chirp_users] RepeaterBook Proximety Not Accurate? To: chirp_users(a)intrepid.danplanet.com Message-ID: <5F40902E-156A-415A-B687-A0118642A496(a)me.com> Content-Type: text/plain; charset=utf-8 Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? 73s KC2MPG ------------------------------ Message: 2 Date: Sat, 20 May 2017 05:48:35 -0400 From: Jim Unroe <rock.unroe(a)gmail.com> Subject: Re: [chirp_users] RepeaterBook Proximety Not Accurate? To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CADnO8U7LPAPZM6s2Y6mtYQd1qz+t+QNJR9xDXG_AAX2kbBvqug(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" On Fri, May 19, 2017 at 11:04 PM, John Kobeck <johnkobeck(a)me.com> wrote: > > Hello Chirpers; > > I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan zip code for example, it doesn?t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won?t allow a larger range? > > 73s > KC2MPG Using "Import from data source", "Location" = 10001 and "Band" = "2 meters (144MHz)", I the following numbers of repeaters are retrieved. Distance: # of repeaters 15: 50 100: 367 300: 1387 Jim KC9HI ------------------------------ Message: 3 Date: Sat, 20 May 2017 08:08:14 -0700 From: "Herb Gerhardt" <hgerhardt(a)wavecable.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> Message-ID: <001301d2d17a$e7936ea0$b6ba4be0$@com> Content-Type: text/plain; charset="us-ascii" I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase from HRO to work once I upgraded to Win10. It worked fine on Win7 and never had a problem with the latest driver but would not work on Win10 till I rolled the driver back. I then turned off the auto driver updates for this device. Everything worked fine after rolling the driver back. A few months later when I tried to read the radio again, it would not connect. I checked the driver and it was still the 3.2.0.0 driver in my listing. It took me several days till I updated the driver to the latest driver which of course did not work, but when I rolled it back again the 3.2.0.0 driver from the pick list for this device, it began to work again. Don't ask me what is going on but then set it back for auto updates. I will now just roll the driver back every time I want to use this cable. I suggest you try to update your driver and then roll it back again to 3.2.0.0 to see if that works for you. I know it sounds stupid but it is worth a try since it worked for me. Herb, KB7UVC NW APRS Group, West Sound Coordinator Our WEB Site: http://blog.nwaprs.info/ -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - Pedja Sent: Friday, May 19, 2017 1:08 AM To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Cannot read Baofeng BF-888S I have strange issue with Windows 10, prolific serial adapter and BF-888S. It reports unable to download from radio. Driver is proper (version 3.2.0.0, update is disabled), and Chirp works fine with the same adapter and other radio (Baofeng UV-B5) reading and writing. I tried four different BF-888S and neither can be read. However, when I use the same USB adapter on my old Windows XP computer, Chirp easily reads and writes those BF-888S. Has anyone met with this problem? -- YT9TP, Pedja http://www.yt9tp.iz.rs --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus ------------------------------ Message: 4 Date: Sat, 20 May 2017 18:23:30 +0300 From: Amnon Zohar <amnon.zohar(a)gmail.com> Subject: Re: [chirp_users] Cannot read Baofeng BF-888S To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <CAN5HzcQAXwM2rBUjdtwkMCOb7_XfsmQ6PgMSqsc5M4B0i19F-A(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" I guess some update of win10 change some part of the driver without changing the driver version number. Redowngrading probably fix this. But this just a wild guess. The solution is important. The reason is less important ?????? 20 ???? 2017 18:09,? "Herb Gerhardt" <hgerhardt(a)wavecable.com> ???: > I have been fighting similar problems on Win10 on my Baofeng UV-5R+. I too > rolled back the driver to 3.2.0.0 to get my "genuine" cable that I purchase > from HRO to work once I upgraded to Win10. It worked fine on Win7 and > never > had a problem with the latest driver but would not work on Win10 till I > rolled the driver back. I then turned off the auto driver updates for this > device. Everything worked fine after rolling the driver back. > > A few months later when I tried to read the radio again, it would not > connect. I checked the driver and it was still the 3.2.0.0 driver in my > listing. It took me several days till I updated the driver to the latest > driver which of course did not work, but when I rolled it back again the > 3.2.0.0 driver from the pick list for this device, it began to work again. > Don't ask me what is going on but then set it back for auto updates. I > will > now just roll the driver back every time I want to use this cable. > > I suggest you try to update your driver and then roll it back again to > 3.2.0.0 to see if that works for you. I know it sounds stupid but it is > worth a try since it worked for me. > > > Herb, KB7UVC > NW APRS Group, West Sound Coordinator > Our WEB Site: http://blog.nwaprs.info/ > > > > > > -----Original Message----- > From: chirp_users-bounces(a)intrepid.danplanet.com > [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of YT9TP - > Pedja > Sent: Friday, May 19, 2017 1:08 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: [chirp_users] Cannot read Baofeng BF-888S > > I have strange issue with Windows 10, prolific serial adapter and BF-888S. > It reports unable to download from radio. > > Driver is proper (version 3.2.0.0, update is disabled), and Chirp works > fine > with the same adapter and other radio (Baofeng UV-B5) reading and writing. > > I tried four different BF-888S and neither can be read. > > However, when I use the same USB adapter on my old Windows XP computer, > Chirp easily reads and writes those BF-888S. > > Has anyone met with this problem? > > -- > > YT9TP, Pedja > http://www.yt9tp.iz.rs > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to amnon at amnon.zohar(a)gmail.com > To unsubscribe, send an email to chirp_users-unsubscribe@ > intrepid.danplanet.com >

2 1

[chirp_users] FT2D
by NNN Wx 20 May '17

20 May '17

I see “bug” numbers 3325 and 3257 from last year, hoping support for Yaesu FT2D radio will work. It’s in the wish list, and doesn’t seem to need hardware for testing. I’m interested in getting chirp to work, and for some insights into how to get the serial connection to work on Macintosh OS X 10.12.5. HOW CAN I HELP (assuming this just needs effort)??

1 0

[chirp_users] RepeaterBook Proximety Not Accurate?
by John Kobeck 20 May '17

20 May '17

Hello Chirpers; I have a question. I am trying to program repeaters into a Kenwood TMV7. I have been using RepeaterBooks Proximity search. When setting a Manhattan zip code for example, it doesn’t seem to matter if I indicate a 100 mile radius or a 300 mile radius. It only seems pull about a 15 miles radius. Is there a default that won’t allow a larger range? 73s KC2MPG

2 1

[chirp_users] Yeas FT2D
by NNN Wx 18 May '17

18 May '17

Another person looking for Chirp support for Yaesu FT2D, and specifically from Macintosh OS X. It doesn’t have to be through a USB cable; the microSD card has worked for me using the extraordinarily painful ADMS-8 software running over WINE. I have some programming and computer networking experience. Is there a way I can help, please? I see from the request list that the FT2D already has been requested and hardware is available, so I presume it’s just a matter of taking apart the data?

1 0

[chirp_users] New Daily Build
by Build System 18 May '17

18 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170518 A list of the changes included in this build (since the last daily) follows: Changes for Build #481 [Jim Unroe <rock.unroe(a)gmail.com>] [LT-580] Add Support for Luiton LT-580 Mobile Radios This patch adds the Luition LT-580 VHF and LT-580 UHF mobile radios to the TYT TH-9000 driver. #4231 Changes for Build #482 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-25X2*] Duplex "split" bug This patch addresses a "split" bug that causes CHIRP to display a memory as a shift direction/offset even if the RX and TX frequencies are each in a different band. * this affects all mobile radios supported by the btech.py driver Related to Bug #4825 Changes for Build #483 [Jim Unroe <rock.unroe(a)gmail.com>] [LT725UV] Wrong Radio Model in RadioPrompt This patch corrects the radio model called oun in the Experimental RadioPrompt. related to Bug #4829

1 0

[chirp_users] Rfinder Latitude Error
by kd7sjt 16 May '17

16 May '17

Greetings from Sunny Sacramento California, I am trying to download my local repeater list through Chirp and RFinder. I have an Rfinder account. That isn't the problem. The problem is when I put in the latitude and longitude for Sacramento California, Chirp complains and says "invalid latitude". I have tried all the different ways I can think of to enter Latitude and Longitude in, and it doesn't help. I've even tried leaving it blank. It still says the Latitude is Invalid. I am using CHIRP daily-20170516 Please Advise.

3 2

Re: [chirp_users] Bunch of questions
by Chas. Thompson 16 May '17

16 May '17

In a terminal session try: sudo apt-get update –fix-missingsudo apt-get install -fsudo apt-get dist-upgradesudo apt-get autocleansudo apt-get cleansudo apt-get autoremove This should cleanup his environment and make sure he is current on the build he is running. After that launch chirp and verify the version is current Daily-20170510 If not re run these steps: sudo apt-add-repository ppa:dansmith/chirp-snapshots sudo apt-get update sudo apt-get install chirp-daily

2 1

[chirp_users] QYT KT 8900
by Richard Whittaker 16 May '17

16 May '17

Hi all. I bought a KT8900 at the beginning of the year, and my FTDI cable showed up about a week ago. Eager to get more than 2 channels programmed in (the programming interface sucks!), I plugged my cable in to the BACK of the radio like all the sites say, and.... Nothing... Fiddle, fiddle, fiddle, nothing. Different radio models, the whole works, radio would not respond. My model has what the manual calls a data terminal jack on the front. I tried it, the cable fit perfectly, and the radio responded just fine. I don't know if this is true if all KT8900s, but if yours has a front jack, it's a good idea to try it. Cheers Richard VA7RHW. ⁣Sent from BlueMail

5 6

[chirp_users] Using public CI systems for build
by Stephen Groat 16 May '17

16 May '17

Has there been any look into using public CI systems? I know you can use Travis (Linux and OSX) and Appveyor (Windows) with git/Github/Gitlab, don't know about mercurial though. I know that there's been significant discussion about mercurial/git, but I don't know if people have taken public CI systems into account. I've made a sample repo on Github (https://github.com/stephengroat/chirp) and made Travis CI (https://travis-ci.org/stephengroat/chirp) and Appveyor ( https://ci.appveyor.com/project/stephengroat/chirp) that people can take a look at. Appveyor isn't 100%, but I'm close. These builds also trigger for Pull Requests, just make a sample PR against the repo to see. Auto deployment to Github Releases/etc. is also easy to do as well. Let me know if people are interested in this addition and thanks for all the hard work on the project! Stephen -- Stephen Groat stephen(a)egroat.com +1 (703) 798-4551 Sent from mobile

1 0

[chirp_users] bojie bj-218 device
by Emre Emre 16 May '17

16 May '17

hi I am using your program.The device i am using baojie bj-218. There is no device on the chirp menu. I would like you to add this device to your program. I look forward to your good news thank you nice a days.

1 0

[chirp_users] Bunch of questions
by Al Jones 15 May '17

15 May '17

Let me first apologize, I don’t really know what I’m talking about. Working with a friend who has two new Retivis RT5 radios – not a major problem. One radio allow me to change information relating to a channel, the other requires that I delete the channel and re-add it – funky but workable. Other minor hassles are that one is ver 1FP3-25 and the other is ver 1FB297; since he wants both radios the same, that’s not a problem, cut and paste from one img to the other and it’s done Since I use Chirp to program my radios - and some friends – I suggested he get it on his computer. Now the fun begins. He runs UBUNTU and while I’m somewhat familiar with Linux I got stopped cold. First error: access to USB0 denied (or words to that effect) chmod 777 /dev/usb0 fixed that. Second error: Ubuntu failed to communicate with radio. 'serial' object has no attribute 'settimeout' Pretty much stopped dead, however he has two versions of python on that computer python 2.7.12 and a python 3 (sorry didn’t get the full version). If I’m reading this correctly, if he were running python3 the above wouldn’t be a problem <that’s a question>; if that’s the case, how does he tell ubuntu / chirp to use py3? … Remember, I said I don’t know what I’m talking about, can someone guide?? Thanks //al I set both his radios up with my Windows box – so for the nonce we’re okay but he’d like to put in a lot more freqs (mistake!) and it’ll be a lot easier on him to have chirp running.

2 2

[chirp_users] Bunch of questions - part two
by Al Jones 15 May '17

15 May '17

I should have noted this in my earlier post – mea culpa When he downloads from the Ubuntu repository he gets Chirp Daily 20160110 – well over a year old. When he downloads the tarball from danplanet using the directions there the first two commands complete, the third gives an error – I’m thinking that he doesn’t have python-serial (and possibly python-libxml2) can some kind soul tell me how to tell him that he needs then and how / where to get them? //al

1 0

[chirp_users] Aviation radio programming
by Stokes Smith 14 May '17

14 May '17

Has anyone used CHIRP to program aviation radios? I recently obtained a Yaesu VXA-200 and would like to use CHIRP as I use it for my Wouxon radio. The Yaesu software is not readily available. Thanks for all y'all do! Chirp is a fantastic program. Stokes

4 4

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 12
by John A Diefenbach 13 May '17

13 May '17

I have two laptops; both DELL. One is W-7, the other: W-10. CHIRP & Baofengs program nicely on the W-7; not the W-10, 'tho I'm not surprised. Thoughts? On Sat, May 13, 2017 at 3:00 PM, <chirp_users-request(a)intrepid.danplanet.com > wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: Alinco DJ-G7 "T" (Fred) > 2. QYT KT 8900 (Richard Whittaker) > 3. QYT KT 8900 (Richard Whittaker) > 4. Re: QYT KT 8900 (Tycen Stafford) > 5. Re: QYT KT 8900 (Larry Lovell) > 6. Re: Yaesu FT-8100R Question (John LaMartina) > 7. Re: QYT KT 8900 (Tycen Stafford) > 8. QYT KT8900 (??? (Kris) Francisco) > 9. Re: QYT KT8900 (Jim Unroe) > 10. Re: QYT KT8900 (Tycen Stafford) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 12 May 2017 11:06:00 -0800 > From: Fred <fredferickson(a)gmail.com> > Subject: Re: [chirp_users] Alinco DJ-G7 "T" > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <20170512110600.7369aeda@hp-a1710n> > Content-Type: text/plain; charset=US-ASCII > > On Fri, 12 May 2017 09:10:56 -0700 > Daniel Curry <dod1450(a)mindspring.com> wrote: > > > I am unable to connect to my Alinco DJ-GT "T" hand held. Alinco > > programming software works with no problem. > > > > I guess that you mean the above to be interpreted as a question and a > request for help in using Chirp. > > I'm no expert and won't attempt to answer but: > > If you wish someone on this list to help you use Chirp to connect to > your radio, it probably would be a good idea to give them a bit more > information. > > What did you try specifically to do? What operating system? What > responses did Chirp give you? Which version of Chirp are you trying to > use? Have you been successful with Chirp before? Etc. > > > ------------------------------ > > Message: 2 > Date: Fri, 12 May 2017 16:39:01 -0700 > From: Richard Whittaker <richard(a)avits.ca> > Subject: [chirp_users] QYT KT 8900 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <05d3520f-38d9-4daa-a550-121a1aa9659b(a)avits.ca> > Content-Type: text/plain; charset="utf-8" > > Hi all. I bought a KT8900 at the beginning of the year, and my FTDI cable > showed up about a week ago. Eager to get more than 2 channels programmed in > (the programming interface sucks!), I plugged my cable in to the BACK of > the radio like all the sites say, and.... Nothing... Fiddle, fiddle, > fiddle, nothing. Different radio models, the whole works, radio would not > respond.? > > > My model has what the manual calls a data terminal jack on the front. > > > I tried it, the cable fit perfectly, and the radio responded just fine. I > don't know if this is true if all KT8900s, but if yours has a front jack, > it's a good idea to try it. > > > Cheers > > > Richard > > > VA7RHW. > > > > > ?Sent from BlueMail ? >

3 2

[chirp_users] QYT KT8900
by "クリス (Kris) Francisco" 13 May '17

13 May '17

Hi i buy KT8900 last month only my problem this morning is no TRansmit i try to program in chirp and reset all still the same they have recieve only no transmit, any body can help me? Im new in this Radio. Thank you KH0VL Sent from my iPhone

3 2

[chirp_users] Yaesu FT-8100R Question
by Alan 12 May '17

12 May '17

I do not see the Yaesu FT-8100R listed as a supported radio. Will Chirp work with my FT-8100R ? Thank you. Alan AA6DW

2 1

[chirp_users] Alinco DJ-G7 "T"
by Daniel Curry 12 May '17

12 May '17

I am unable to connect to my Alinco DJ-GT "T" hand held. Alinco programming software works with no problem.

2 1

[chirp_users] Programming a BTECH UV-50X2
by Bob DeFranco 12 May '17

12 May '17

I just ordered a BTECH UV-50X2 and was going to download the latest version of ChiRP to program it. Looking at the list of supported radios, however, I see the UV-50X3 and the UV-5001 (the predecessor to the UV-50X2) but not my radio. Which model should I select? I suppose I could just try different ones and see which works, but I worry about bricking the radio. Any advice? Bob DeFranco

5 8

[chirp_users] DJ-G7
by Daniel Curry 10 May '17

10 May '17

I am unable to program my DJ-G7 hand held. I get no response from the radio. But when I start it sees the com port and DJ-G7EG. -- Daniel Curry California American Legion Amateur Radio Area 2 Commission and Chairman. US Air Force Veteran IPV6 Sage Certified PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92 San Francisco/Silicon Valley AmprNet Co-coordinator [44.4.0.0/16]

1 0

[chirp_users] New Daily Build
by Build System 10 May '17

10 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170510 A list of the changes included in this build (since the last daily) follows: Changes for Build #480 [Dan Smith <dsmith(a)danplanet.com>] Add Rugged RH5R-V2 #4803

1 0

[chirp_users] Jingtong JT-5988HP support
by Shon Edwards 08 May '17

08 May '17

I'm patient and I don't need the support myself any more, but this would be a wonderful radio to get CHIRP working with. I know a lot of people would appreciate it very much. I bought the radio from Amazon a couple of months ago. I had the cable and software. I tried everything. Nothing worked. To give you an idea of what is necessary to program this radio correctly, I'll outline the steps below even this may not be directly on topic. I'm hoping to show just how difficult this radio is to program, so hopefully we can get some CHIRP support soon.. It's the only 12/10W (no one is sure which it really is) radio (HT) I know of. Anyway, here's how I stumbled on a way to program it: 1. I searched google until I found: http://prepari.org/?page= 5988HP#review-JT5988HP.html. 2. Get the disc out that comes with the radio or click here: htpps:// amazon.com/jt-5988/JT-5988+High+Mid+Low.rar and get ready to copy a driver from it to your HDD. 3. Install the s/w. (it's better than the Chinese s/w for programming) 4. Watch the video on how to set up a com port: JT-5988HP-com-port-setup_ HTML-video.mp4. 5. Click on setup. 6. Click on communication port. 7. Select an available com port and number one will be deselected, then OK. 8. Put the Chinese disc in your drive that came with the radio. 9. Click on the subdirectory (folder): USB驱动. Then click on the folder labeled CH340. Find the executable file CH341SRE.exe. You can not run it from its current position because of all the Chinese characters in the path. Copy it to your hard drive and then run it. Install the driver. Click on OK. If you want to see that it's there, I'm tired of writing steps, but you get the picture. 73 de Shon K6QT Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA Home phone: (801) 444-3445 E-mail: sre.1966(a)gmail.com or Shon Edwards 715 Strawberry Creek Private Rd. Bedford, WY 83112 Cell: (307) 248-2104

1 0

[chirp_users] UV-82HP settings question
by Tom Norris 08 May '17

08 May '17

In CHIRP I have Settings > Basic Settings > Display Mode A: 'Name' and Settings > Basic Settings > Display Mode B: 'Frequency' Is there a setting that will allow the Display Mode B: frequencies to stay in sync with Display Mode A: 'Name' when the unit is in Scan mode? Thanks, Tom NB5Q

2 1

[chirp_users] Help
by Brewster 08 May '17

08 May '17

I recently purchased a QYT KT 7900D radio and uploaded frequencies to it using the latest version of CHIRP. The problem is that all the frequencies go into all of the four different bands. The radio as described has four "channels", A-D. What I am trying to do is assign the 2 meter band to channel A, the 220 Mhz band to channel B, the FRS/MURS/GMRS frequencies to channel C, and the 440 Mhz band to channel D. Has anyone had any experience with this radio and frequency allotments such as I describe? Thanks, Bruce AD8K

7 13

[chirp_users] Icom ID-5100, any work on it?
by Chuck Hast 08 May '17

08 May '17

I have one and sure would like to be able to put channels into the SD card that stores the channels (actually sort of a backup to the on board storage) I can send someone files that the Windows program generates which you then copy to the SD card, and then place the SD card in the radio and read it. I can even send you a copy of the original Windows program if you want, (It is free anyhow) I have programmed the radio with the software but find it easier just to pull out the SD card, load it and be done. Would rather do it under Linux rather than have to deal with Windows stupidity. I sure wish I knew how to code as I would have tried my hand at it but I do not.

1 0

[chirp_users] CHRIP and Icom ID-51A Plus - Out of sync with radio
by Noah B 08 May '17

08 May '17

Hi there, I've been trying to connect to my Icom ID-51A Plus with CHIRP and I'm getting this message in Windows 7, MacOS, and Linux: "An error has occurred Failed to communicate with the radio: Out of sync with radio" I'm using a Valley Enterprises Icom OPC-2218LU USB FTDI Chipset cable which works under Windows 7 with the Icom CS51-PLUS software that came with the radio. I've tried connectin in clone mode and not in clone mode, and I'm using CHIRP version daily-20170501. After some poking around on the website, mailing list, and issue tracker, I'm not certain if CHIRP is supposed to be working with this radio. Any suggestions? I'm really hoping that I can get CHIRP working so I can avoid using the Icom software... Thanks! Noah

1 0

[chirp_users] Baofeng GT3-DMR
by David Stapp 08 May '17

08 May '17

Hello, I am trying to use Chirp to configure a Baofeng GT3-DMR radio, but was not able to establish communications. Does Chirp support the radio? If yes, what model should I use for the upload? Thank you for your assistance. Dave Stapp dstapp(a)att.net Phone: 973.723.3422

4 4

[chirp_users] Kenwood TH-D74
by Nigel Johnson MIEEE 07 May '17

07 May '17

Is anybody working on it? I am on vacation now and could help. I have a D74 but am not a python programmer. It's C for me. If someone could give me a few pointers I could play with it myself, or I could let somebody ssh into my system and read/write to ACM0 I have tried the Windows MCP-D74 software from Kenwood but can only run it under Virtual Box and it is mediocre at best from day to day. I have 22 nodes n my network and not a single windows! I live in Canada so shipping it to a volunteer would be a pain. 73 de Nigel ve3id -- Nigel Johnson MSc., MIEEE VE3ID/G4AJQ/VA3MCU Amateur Radio, the origin of the open-source concept! You can reach me by voice on Skype: TILBURY2591 If time travel ever will be possible, it already is. Ask me again yesterday This e-mail is not and cannot, by its nature, be confidential. En route from me to you, it will pass across the public Internet, easily readable by any number of system administrators along the way. Please consider the environment when deciding if you really need to print this message

2 1

[chirp_users] Raspberry pi
by Patrick Brown 07 May '17

07 May '17

Does anyone use Chirp on Raspberry pi ? -- Patrick Brown YCSRT 3213 N7FHB Wilhoit 145.350 Wildflower SYCSRT TEAM Manager http://ycsrt.org T.E.A.M = Together Everyone Accomplishes More

3 7

Re: [chirp_users] off topic hardware question
by Thom LaCosta 07 May '17

07 May '17

At 09:49 AM 5/6/2017, you wrote: >After digging mine out, they are all labeled as to the frequency >range. The ones with the white ring are 220, the ones with the black >ring are 144/440. Thanks! Thom

1 0

Re: [chirp_users] off topic hardware question
by Steve Bosshard (NU5D) 06 May '17

06 May '17

Easiest way would be to use a cheap field strength meter - kinda like the $20 CB SWR meters with a short whip to get a relative strength indication - the correct antenna will have a noticeably greater field strength - in a pinch I once used a Simpson 260 in the AC range setting and the test leads for an antenna - crude but useful. nu5d -- *✞ ΙΧΘΥΣ* <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> Virus-free. www.avg.com <http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_cam…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

1 0

[chirp_users] off topic hardware question
by Thom LaCosta 06 May '17

06 May '17

Sorry for the off topic...I just purchased a UV-5X3. How do I identify which antenna is for 220? There are two unlabeled whips, one has a black inner core at the connector,,,the other is white, and I can't read the label. thanks Thom k3hrn

5 6

[chirp_users] DM 5R
by Sarge ex 7thAF 06 May '17

06 May '17

Is this radio programmable by Chirp ? Thanks -- Sarge KE5YPB, Lickskillet, Texas "All it takes for evil to triumph is for good men to do nothing." " Lets Roll " ---- Todd Beemer--- 9/11/01 --- American Hero Are you going to take a stand to help America?

3 2

[chirp_users] CHIRP VHF / UHF band "low / high" band limits ?
by Constable John Vith 06 May '17

06 May '17

We are a state law enforcement office using CHIRP to program "QYT - KT 8900 D" units for use in our prisoner transport and patrol vehicles. Our area (Greater Pittsburgh, PA) is one of the few areas nationwide where due to congestion the "T-Band" UHF (480 - 520 Mhz) is in use. Under the "Settings - Other Setting" tabs on CHIRP the band limits are "grayed out", preset to 136 - 174 Mhz VHF and 400 - 480 Mhz UHF. How can we change the "high" (upper) band limit for UHF from 480 Mhz to 520 Mhz ?

6 9

[chirp_users] Can't upload to FT-60R
by John Perry 03 May '17

03 May '17

Hello Everyone! I have an issue with CHIRP not being able to upload to my FT-60R. It will download just fine but I get an error when I try to upload to the radio. I also have the FT-60 Commander software that works fine but I had to change it to the "Alternate Upload Method" Any thoughts or suggestions? -- John Perry - WX5JP

6 17

[chirp_users] BF 888s and UV5R
by Nate Alvin 03 May '17

03 May '17

About 6 weeks ago, i purchased the 2 radios listed in the subject line to test them out for work. I programmed them both to the frequencies assigned to our license. We were assigned a corporate license recently, with different frequencies, vs our stand alone site license which is going to expire. Using the same computer, same "fake prolific" Baofeng cloning cable and the updated daily CHIRP software i was able to reprogram the UV5R, but when i went to read the BD888S i received the error message "radio refused to enter programming mode". Any help would be appreciated. Thanks

7 16

Re: [chirp_users] BF-F8HP
by Baji Panchumarti 02 May '17

02 May '17

Chere, to whom are you trying to transmit ? Directly to another radio via simplex, or to a repeater ? Have you checked the following: - Correct Receive & Transmit freq settings - Correct CTCSS / DCS tones for Transmit / Receive ? Did you program your radio manually or using CHIRP ? -baji. ~~ K 8 I I T _ On Tue, May 2, 2017 at 1:40 PM, Chere McCoy <agedog1(a)hotmail.com> wrote: I have a Baofeng BF-F8HP I can receive but not transmit > What settings have I messed up and how do I fix it > > 73. Km4Uuq > --

1 0

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 1
by Chere McCoy 02 May '17

02 May '17

I have a Baofeng BF-F8HP I can receive but not transmit What settings have I messed up and how do I fix it 73. Km4Uuq chirp_users-request(a)intrepid.danplanet.com wrote: Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Re: Unable to Install CHIRP software to Windows 10 (Torbj?rn Darre) 2. Re: Unable to Install CHIRP software to Windows 10 (Jim Unroe) 3. Re: Unable to Install CHIRP software to Windows 10 (Jim Unroe) 4. Transmit Problems (DonieAllen1971(a)Yahoo.com) 5. Re: Transmit Problems (Glenn At Home) 6. Re: Transmit Problems (Mike McRoberts) 7. Re: Transmit Problems (Daniel Humphries) 8. Re: Transmit Problems (Jardy) 9. Re: Transmit Problems (Jardy) 10. Re: Transmit Problems (Carrie Jackson) 11. Re: Transmit Problems (kc6iih(a)aol.com) 12. Re: Transmit Problems (Jardy) 13. New Daily Build (Build System) 14. Re: Transmit Problems (Jim Unroe) 15. Re: Transmit Problems (Bill KA8VIT) 16. BF 888s and UV5R (Nate Alvin) 17. Re: BF 888s and UV5R (Neil B) 18. Re: Transmit Problems (Baji Panchumarti) 19. Re: BF 888s and UV5R (Nate Alvin) 20. Re: BF 888s and UV5R (Neil B) ---------------------------------------------------------------------- Message: 1 Date: Sun, 30 Apr 2017 21:02:59 +0200 From: Torbj?rn Darre <torbjorn.darre(a)lyse.net> Subject: Re: [chirp_users] Unable to Install CHIRP software to Windows 10 To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com> Message-ID: <203c-59063500-1-47a73600@189506587> Content-Type: text/plain; charset="utf-8" Hei, The error is Error reporting is enabled and it does does not open the software. Yes my Windows user does contain ?.? My e-mail adresses does not contain ? and my CHIRP user does not contain ?.? I will try to make a new windows account user with out ? and see if that works. 73, Torbj?rn LA8TP S?ndag 30. April 2017 16:20 CEST skrev Jim Unroe <rock.unroe(a)gmail.com>: ?On Sun, Apr 30, 2017 at 8:21 AM, Torbj?rn Darre <torbjorn.darre(a)lyse.net> wrote: > Hei, > > I am new to CHIRP web site and CHIRP software. > I got an error when I down loaded the CHIRP software to my Windows10 PC. I > am not able to open the software when I have done a succefull and complete > installation. > What do I need to do? > > 73, > Torbj?rn, > LA8TP So what is the error? Does you Windows user name have the "?" character in it? If yes, try another user with only standard characters. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Torbjoern Darre at torbjorn.darre(a)lyse.net To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- hilsen Torbj?rn

1 0

Re: [chirp_users] Transmit Problems
by Baji Panchumarti 01 May '17

01 May '17

You may find the two links below helpful: http://www.hamuniverse.com/w7dtguv5rprogramming.html I haven't seen the entire video below, but it seems to be on the right track: https://www.youtube.com/watch?v=ml6cyOjBTHY -baji. ~~ On Mon, May 1, 2017 at 7:32 AM, Bill KA8VIT wrote: Not sure what your friend's radio is but it sounds like they may have CTCSS > or PL turned on. > > 73 - Bill KA8VIT > > > > On April 30, 2017 at 9:21 PM Jake via chirp_users wrote: > > > > In a few weeks some friends and I are going on a 10 day camping trip. We > will be several miles back into a wooded area. I would like to use my use > my Baofeng UV-5RA during this trip to communicate with my buddies radio he > picked up from a surplus store. I can receive his transmissions but he > cannot receive my transmissions. I am not sure what setting to adjust in > chirp. > > > > Below is a list of the settings I set in CHIRP for this channel. > > > > Name = TripFreq > > > > Frequency = 462.562500 > > > > Mode = NFM > > > > Power = Low > > > > > > ___

1 0

[chirp_users] Transmit Problems
by DonieAllen1971＠Yahoo.com 01 May '17

01 May '17

In a few weeks some friends and I are going on a 10 day camping trip. We will be several miles back into a wooded area. I would like to use my use my Baofeng UV-5RA during this trip to communicate with my buddies radio he picked up from a surplus store. I can receive his transmissions but he cannot receive my transmissions. I am not sure what setting to adjust in chirp. Below is a list of the settings I set in CHIRP for this channel. Name = TripFreq Frequency = 462.562500 Mode = NFM Power = Low

9 10

[chirp_users] New Daily Build
by Build System 01 May '17

01 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170501 A list of the changes included in this build (since the last daily) follows: Changes for Build #479 [SASANO Takayoshi <uaa(a)mx5.nisiq.net>] previous patch for bug #4687 causes PEP8 regression problem, "E261 at least two spaces before inline comment". Replace a tab character to two spaces to fix the problem. [Dan Smith <dsmith(a)danplanet.com>] Revert accidental commit #0 Backed out changeset f9a81de5297b

1 0

[chirp_users] Unable to Install CHIRP software to Windows 10
by Torbjørn Darre 30 Apr '17

30 Apr '17

Hei, I am new to CHIRP web site and CHIRP software. I got an error when I down loaded the CHIRP software to my Windows10 PC. I am not able to open the software when I have done a succefull and complete installation. What do I need to do? 73, Torbjørn, LA8TP

3 5

[chirp_users] New Daily Build
by Build System 30 Apr '17

30 Apr '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170430 A list of the changes included in this build (since the last daily) follows: Changes for Build #478 [Ray Cielencki <rayslinky(a)gmail.com>] [VX-3] fix bank_used issue #1203 This patch works around #1203 -- where banks are not properly marked as used. Additionally, it corrects how bank_used values are calculated. [SASANO Takayoshi <uaa(a)mx5.nisiq.net>] Bug#4771, add high-speed (38400bps) cloning to IC-P7 [SASANO Takayoshi <uaa(a)mx5.nisiq.net>] Bug #4769 remove meaningless _mem.set_raw("\x00" * (_mem.size() / 8)) line, all elements are filled when setting/emptying entry. [Richard Birch <n7uoa.birch(a)gmail.com>] [vx5] Corrected checksum and added prompts Fixes #4749 [Dan Smith <dsmith(a)danplanet.com>] Add Rugged RH5R G2 #0

1 0

Re: [chirp_users] Programming ICOM V80 HT.
by Baji Panchumarti 28 Apr '17

28 Apr '17

4 year old email from Dan-the-man ! http://intrepid.danplanet.com/pipermail/chirp_users/2013-May/003719.html You should look around and see if someone got around testing it, or perhaps you could offer to test it. Good luck ! -baji. ~~ K 8 I I T _ On Fri, Apr 28, 2017 at 6:02 AM, John Mehl <ke4egc(a)gmail.com> wrote: The ICOM V80 is not listed as a supported model. Is it programmable using > some other model ID. > > Thanks John .M. > > _______________________________________________

1 0

[chirp_users] Programming ICOM V80 HT.
by John Mehl 28 Apr '17

28 Apr '17

The ICOM V80 is not listed as a supported model. Is it programmable using some other model ID. Thanks John .M.

1 0

[chirp_users] Oh Happy Day !!!!
by Bruce LeGrande 27 Apr '17

27 Apr '17

⁣ Finally got the Ubuntu mini.iso to d/l without error, got a FULL INSTALL of Ubuntu v16.04 on a USB Thumb, got Dans ppa set in the repository, and got 'chirp-daily' to d/l and install..... (thanks to the wifi at Buddha Thai Kitchen in Middletown - best Thai food in the area) Yippee !!!!! Looks like my radios shall finally get programmed... Checked the BTech UV-5X3, the UV-82HP, and have spent the remainder of the afternoon researching freqs and programming the Leixen VV-898S... Need to order the cable for the VX-8DR (Yaesu), and the UV-50x3 (BTech) in the truck, but I see those in the list in Chirp, so I'm very hopeful at this point... Perhaps it's time for good things to start happening here... FINALLY !!! Thanks for putting up with my rants over the last year+... Thanks to all that offered input. And those that silently prayed. 73 - Bruce Sent from BlueMail

4 3

[chirp_users] FT2900
by Eric Chopin 26 Apr '17

26 Apr '17

Greetings again CHIRP'rs I now have a Yaesu FT2900 that I would like to program with CHIRP. I have a Prolific cable and found the 'pin out' on the mike socket ( #4 GRD - #6 CLONE) I go through the sequence to get the radio into 'CLONE' mode and then to 'TX' but the response I get from CHIRP is "The radio is not responding" and "ERROR" on the radio LCD readout. Any offers? 73's Eric

2 2

[chirp_users] FT 270
by Eric Chopin 26 Apr '17

26 Apr '17

Hello Jardy & Todd thank you for the info, I found the pinout diagram and have used a RTSystem cable and their software which all works well. Did not have any luck with CHIRP :-( 73's Eric P.S. I am about to present you all with another request in my next emaail!

1 0

[chirp_users] FT270 programming
by Eric Chopin 25 Apr '17

25 Apr '17

Thanks Baji for the link.... I checked it out and could not locate the file that is mentioned in the 'reddit url.' using CMD prompt in Windows XP... Windows could not locate the file anywhere. I have a couple of Prolific usb dongles that I can wire to usb... but would need the 'pin-outs' for the FT270 Jack plug (TX-RX-GND). Maybe someone out there can help out with a diagram? 73's Eric VE7ECJ

3 2