- Users - lists.chirpmyradio.com

[chirp_users] getting chirp to work with the id880?
by Justin Mann 25 Apr '11

25 Apr '11

Hi all, I've just downloaded chirp, have it installed and am ready to see if I can get this connected to my id880h. I'm looking under the "radio" menu, and I see options for Icom 9x, kenwods, but nothing for the 880hs. Any ideas? Thanks,

2 5

[chirp_users] CHIRP Daily Builds
by Dan Smith 23 Apr '11

23 Apr '11

Hi all, For a while now I've been meaning to get a daily build system setup that would decrease the time between fixing a bug and getting it in the hands of the reporter and tested. This afternoon, I wrote the necessary scripts to get this going. Each night at 4am Pacific, my system will generate a Win32 and Linux tarball build here: http://trac.chirp.danplanet.com/chirp_daily/ It will do that only if something has changed that day in the tree. It will also do it blindly from the tip of the tree, which could very well be broken. However, I usually only push up to the tree when I've completed a particular feature or bug fix. However, you should use these at your own peril. So, if you've already had a bug fixed and were waiting for 0.1.12b1, head up to the URL above and give it a try. Thanks! -- Dan Smith www.danplanet.com KK7DS

1 0

[chirp_users] [CHIRP] #87: Chirp v0.1.11b7-win32 and IC-W32A -- special channels missing on d/l info
by CHIRP Tracker 23 Apr '11

23 Apr '11

#87: Chirp v0.1.11b7-win32 and IC-W32A -- special channels missing on d/l info ---------------------------------+------------------------------------------ Reporter: kb3mun@… | Type: Bug Status: new | Priority: Functionality Milestone: | Component: Bank Editor Version: | Keywords: IC-W32A, W32A Platform: Windows | ---------------------------------+------------------------------------------ The IC-W32A's scan edge channels (named M1A and M1B) do not appear on the table of frequencies downloaded from the rig. Note that the UHF and the VHF bands each have a set of M1A and M1B named memory locations. 73 de Daniel KB3MUN -- Ticket URL: <http://trac.chirp.danplanet.com/trac/ticket/87> CHIRP <http://trac.chirp.danplanet.com/trac> CHIRP Development

1 1

[chirp_users] [CHIRP] #90: Editing issue
by CHIRP Tracker 23 Apr '11

23 Apr '11

#90: Editing issue -----------------------------------+---------------------------------------- Reporter: jaymarc@… | Type: Bug Status: new | Priority: Stability Milestone: | Component: Memory Editor Version: | Keywords: Platform: Windows | -----------------------------------+---------------------------------------- I tried to insert a row above one of the memory lines and it saiod it did it and in fact the memory numbers did show a skip. But there was no way to then edit the new line - it was not showing. Even unclicked and reclicked show empty memory channels showed 11 then 13 below it -- Ticket URL: <http://trac.chirp.danplanet.com/trac/ticket/90> CHIRP <http://trac.chirp.danplanet.com/trac> CHIRP Development

1 4

[chirp_users] [CHIRP] #70: Would like to have bank field populated in csv export
by CHIRP Tracker 23 Apr '11

23 Apr '11

#70: Would like to have bank field populated in csv export ------------------------------------+--------------------------------------- Reporter: W1GRI@… | Type: Feature Status: new | Priority: Functionality Milestone: | Component: Memory Editor Version: | Keywords: Platform: Windows | ------------------------------------+--------------------------------------- Playing with CHIRP again - last summer the IC-92Ad stuff didn't seem to work, but I'm trying again. ID-880 seems to work. I'm really happy to see that you handle bank & bank index in chirp. Organizing banks is a major pain for me. I was really excited to see the values shown in the chirp screen. But, no joy when I export to a csv file. Seems that the bank values are always empty. I would really love to see the bank id displayed (any form, letter or an index number would be great). I have written some programs in visual foxpro that allow me to make groups pretty easily, but the only way to get them into the radio is to import from a csv file via the Icom software. (With the 92ad this means selecting each bank and doing an import of a csv for that bank) Is there any way you can populate the bank field in the csv file AND, most importantly, allow it to be imported back after changes. Then I could build a customized csv file for each situation and load the whole radio in one step. Thanks for considering this request. -- Ticket URL: <http://trac.chirp.danplanet.com/trac/ticket/70> CHIRP <http://trac.chirp.danplanet.com/trac> CHIRP Development

1 2

[chirp_users] [CHIRP] #88: saved files are unreadable
by CHIRP Tracker 23 Apr '11

23 Apr '11

#88: saved files are unreadable ------------------------------+--------------------------------------------- Reporter: iz5fsa@… | Type: Bug Status: new | Priority: Stability Milestone: | Component: Import/Export Version: | Keywords: csv chirp img Platform: Linux | ------------------------------+--------------------------------------------- I've created my own csv downloading from radio IC2820. I've also saved file as CHIRP and IMG format. Then I've created a new file to import memories to uplpoad to a ICE80D but when I read again the CSV file it was UNREADBLE!!!! I've re-opened IMG and CHIRP file with the same UREADBLE error! I attach CSV IMG and CHIRP files of the encountered error. I attach also memories.csv that contains memories I want to upload on ICE2820s, ICE92Ds, ICE80Ds and ICE880Ds of our DSTAR GROUP here in Scandicci, Florence... if you can solve the problem. -- Ticket URL: <http://trac.chirp.danplanet.com/trac/ticket/88> CHIRP <http://trac.chirp.danplanet.com/trac> CHIRP Development

1 4

[chirp_users] [CHIRP] #82: Support for Wouxun KG-UV2D
by CHIRP Tracker 23 Apr '11

23 Apr '11

#82: Support for Wouxun KG-UV2D ---------------------------+------------------------------------------------ Reporter: n9dn@… | Type: Feature Status: new | Priority: Would be nice Milestone: | Component: Memory Editor Version: | Keywords: Platform: MacOS | ---------------------------+------------------------------------------------ We just got a Wouxun KG-UV2D and would love to be able to sync to that from our other radios via CHIRP. They're getting a lot of sales, it is a very functional dual band HT for $120. -- Ticket URL: <http://trac.chirp.danplanet.com/trac/ticket/82> CHIRP <http://trac.chirp.danplanet.com/trac> CHIRP Development

2 3

[chirp_users] [CHIRP] #86: Chirp v0.1.11b7-win32 gives 'Entry Point Not Found' dialog
by CHIRP Tracker 22 Apr '11

22 Apr '11

#86: Chirp v0.1.11b7-win32 gives 'Entry Point Not Found' dialog -----------------------+---------------------------------------------------- Reporter: anonymous | Type: Bug Status: new | Priority: Stability Milestone: | Component: Memory Editor Version: | Keywords: Platform: Linux | -----------------------+---------------------------------------------------- Using Chirp v0.1.11b-win32 on WinXP SP3 with KeySpan USA-19QW USB-to- SerialPort, and running chirpw.exe from the unpacked ZIP. Upon start-up of chirp, I am presented the following dialog... TitleBar: chirpw.exe - Entry Point Not Found Message: The procedure entry point libivonv_set_relocation_prefix cound not be located in the dynamic link library iconv.dll. ..three times before the Chirp application window appears. I get the same dialog once more when I click the RADIO menu choice. Windows (software) Data Execution Prevention is enabled. Attached are the system's environment variables list in file 'set.pdf'. The locations that copies of iconv.dll are found is also attached. If you want the System Information printout, ask for it--it is 5.5 Mb as a PDF. 73 de Daniel KB3MUN -- Ticket URL: <http://trac.chirp.danplanet.com/trac/ticket/86> CHIRP <http://trac.chirp.danplanet.com/trac> CHIRP Development

1 9

[chirp_users] Chirp question
by Jay Marcucci 22 Apr '11

22 Apr '11

Hi Quick question - I ran the software against my Wouxun UV2D as well as my Yaesu FT7900. The column marked bank showed up on the Wouxun but not on the Yaesu file. Strange since UV2D doesn¹t do banks and the 7900 does. Also I tried it on the MAC side but terminal window opens and then says it needed a gtx file Not too important as I run it on the Windows side of my iMac Regards, Jay KC2YSK

2 1

[chirp_users] running the chrip_osx.sh script?
by Justin Mann 22 Apr '11

22 Apr '11

Hi there, When run the chirp_osx.sh script in terminal I get permission denied. Is there something that I need to do in mac osx to make this work?

2 2